The Ultimate Shooting Board - Part 2

[@abbii1661]

nice work

[@SteveCashmoreWoodworks]

Thanks 👍

[@catherinehargreaves9959]

Yes , more on the horizontal table, I always feel apprehensive putting my fingers under the rat's table. all the best, jack

[@SteveCashmoreWoodworks]

Ok, I will put something together at some point but it’s not going to be for quite some time now. I moved house recently and need to build a new workshop. Everything is on hold now for a bit. The horizontal table is just a piece of 15/18mm melamine (in my case) or similar manmade board. To attach it to the Rat you just make 2 triangular shaped laminated “brackets” of ply or mdf. Screw each one to the underside of the H-table located exactly where each cam clamp is on the Rat. You can add a couple of slots as you see on mine and make some low profile clamping jaws which are attached through the slots with bolts and wing nuts. Hope this helps?

[@catherinehargreaves9959]

@@SteveCashmoreWoodworks sorry for the delay ,yes it dose help . hope all is well with house move ,please make yourself a good workshop , all the best .lignator jack.

[@catherinehargreaves9959]

hi.steve looks good so far, will watch all 3. very resourceful. i would also like to see woodrat table and any other mods.by theway its a very good book. thanks v . mutch. lignator jack.

[@SteveCashmoreWoodworks]

Thanks Jack. Do you mean you would like to see more info on the WoodRat horizontal table and other jigs I’ve made for the Rat? Yes, it’s an excellent book! Cheers Steve

[@catherinehargreaves9959]

@@SteveCashmoreWoodworks hi steve yes to that,look forward to all your vids.but settle in first ,good luck jack.