The worst thing that could have happened. DID Happen !

[@MrBuildit]

Check Out Govee to help create your dream immersive entertainment experience. #GoveeHomeCourt bit.ly/41pzmad

[@Ak47777-l]

Never go with barn style panels! Those rubber washers will leak 1000% not if but when. Especially over tighted by the way it looks

[@jacobs-uo6si]

The reason the roof looks all dented is because the roofers screwed into the flat part of the metal. You’re always supposed screw into the rib….so that it doesn’t suck in the flat part to make it look like dents all over. I’d be pissed

[@craigfehr411]

That’s a ton of oil canning - panels and trim. I feel for ya man. I’d be upset and would put that back on your installers to fix

[@2EoD4]

More expensive but a standing seam metal roof is the only way to go.

[@Laffs23]

If you did want a ceiling fan in the vaulted area you can attach the j box directly to the ridge beam and fir out the sides and wrap it to make a faux wood beam look.

[@cejkwo100]

That house looks like a giant roof sitting on the ground. Not a fan of that style

[@QuadTAZ]

Are the fasteners overdriven? Quite a bit of an indent at each screw showing on the panels.

[@MichaelCurley-il6sm]

Thought the same thing, I have a metal roof and not like that

[@thomasschilling2757]

Way too tight. Not only does it cause those “dents” in the roof it also speed up the deterioration of the rubber gaskets. So to be a bad AND LEAKY install…

[@thomasschilling2757]

Also screws should be in the ridge instead of the “feild” or the flat part of the roof

[@jeffhardythebest1234]

unc must've just learned Murphy's Law

[@brandonsarria7632]

That tantrum was a little cringe

[@magicalfruitstudios4162]

When you're a kid and do that, they call it throwing a fit, and if you do it as an adult, they say you are a manager, or a foreman.

[@iVolkswagen]

He is a sensationalizing man-baby

[@iVolkswagen]

He is a sensationalizing man-baby

[@CoorsLight2025]

a cardiologists probably told him it's a good way to relieve stress when building an A-frame house.

[@jtthelightskin]

*Has tantrum again* 😆😆

[@alopardo]

Why does the roof look all dented?

[@jjjacer]

looks like thats were the screws went in, so maybe it deflected the metal a bit.

[@devonpearson2540]

Should screw thru the main rib not in the flat areas - looks like crap

[@craigfehr411]

Yea don’t show Kyle from RR Buildings!

[@alopardo]

@@craigfehr411 right?!?!?!

[@saulgoodman2018]

@@craigfehr411 I was thinking the same thing. The roofers should watch his videos.

[@saulgoodman2018]

He didn't measure it when it came? It does not make any sense to have an outlet next to the sliding doors. Sometimes codes makes no sense.

[@Ceilingfan33]

“Anything that can go wrong will go wrong” …. Yeah when start a build with no experience with barely any time before winter 😂

[@cameronbarber3768]

You should do rockwool insulation for the roof tp cut down on noise from rain and hail in the wet seasons. Unless you like that sort of thing but it would personally drive me nuts

[@craigwilson4643]

I don't understand how driven rain will not go under the ridge ,and the flashing over the dorma (bump-out) sections, was it sealed? It's just floating above the panels on the join, and from the video view not much overlap.

[@abelo0657]

You are doing what I want to do but I don’t know how to start

[@trinidadgonzalez7277]

Horrible roof work Those washers will leak eventually 🤦🏽‍♂️

[@PvMTerry]

No it won't

[@alopardo]

@@PvMTerry yes it will, 100000%. Every single one is overtightened. The washers will deteriorate.

[@islandartscrafts971]

Shoulda hired a company that makes the panels right on site from a roll

[@saulgoodman2018]

Roof looks like crap. Dented, and got all mud all over it.

[@PvMTerry]

Rain will wash it.....

[@saulgoodman2018]

@@PvMTerry Not the caked on parts.

[@RSL2700]

Rumor has it, not only did you come up with the jig to hold your fascia, but you also came up with the 3,4,5 method

[@jneve2340]

No Diddy roofing 😂😂

[@edwardkendall1540]

How about running the 12 inch section at the bottom then run the long section to the ridgeline?

[@lou9108]

That's what I thought too. Then you are looking at not as much footage due to the bump outs.

[@MichaelCurley-il6sm]

How do you make that mistake when you have plans is my question…. Went with the meme roofing company is why

[@tylerbabb300]

Seems to me after 3in on the overhang the overall weight of ice and snow would allow the metal to curl and the water would not shed.

[@NongNongHead]

That roof is going to be a big mirror and will be like you’re looking directly at the sun at certain parts of the day

[@coachwarrenraven]

No you want standing seam metal roof.

[@frankandmo]

Good call with the metal roof, looks awesome 😊

[@nickjskowron]

Always a good day when there’s a new Mr. Build It video!

[@mrroyce1138]

I have seen were they exiet the vent pipes on the soffit so the snow dosn't block them

[@CharlietheHandyman]

Working in the cold is always a pleasure!

[@ShadowMoonFarms]

Thanks for sharing

[@andreaamaro7102]

Extraordinario trabajo se ve que está quedando muy bonita y cuidado con el frío porque se ve muy intensa la nevada, feliz Navidad 🎄 que dios te conceda todo tus deseos bendiciones para ti y tu familia ❤️🙏🙏

[@ndadon]

Bruh, is Corbin your twin? for a moment there I'm like who's Alex??? LOL love your channel!

[@j_beckham]

Roof looks good

[@ButBigger42]

Why would you start this so close to winter?

[@jacobfaulkner4996]

That's a nice Cooks jersey there SIR. DCFFL

[@TassieDIY]

Almost 1M bro 😎 almost………

[@MrFish1968]

Wow you and the Chuck Norris guy could be brothers.

[@jere6344]

Looks terrible

[@WisconsinMoparEnthusiasts]

Buddy you need to patch that drywall in the game room. New video idea..

[@portegobelet]

So many hate messages…. I don’t understand. Why are you here if you don’t like the content?

[@gianniqccanada6545]

this channel is always DRAMA lol

[@Albanianguy9]

Dang. Views are way down

[@MH-hi6ug]

Hey be aware of the water that is at the deck post. it will destroy your deck in the long run. Right now there is a big puddle Also..make it easy for your self and put up some good blocking in the kitchen so you can hang stuff easy in the future

[@lijpowww]

Ai screws should always be installed on the crest corrugation or on the ribs. This rule of thumb goes the same no matter what roofing sheet material is used, metal or plastic. You might get away with it due to the slope, but why though..

[@shaggysc8]

Chuck Norris Company gets a shoutout but not your framing guys? hmmmmm wonder why

[@MichaelCurley-il6sm]

I don’t think they were a actual company 😅

[@valsomeone2180]

Roof looks great

[@theunknownbeat-technomusic9037]

Love watching Mr. Build It. Dude you are so close to 1M subscribers. Please support him. His content is awesome.

[@rodrickwarnick276]

Why is your titles to your videos so negative. Every time I see ur new video pop up it's always "the worst happened" "every one got fired" "the unfixable just happened". Weres the positivity. And also the tantrum to start the video isn't a good tone setter.

[@chuddleywindston]

Lmao

[@turneduptyler]

Why wait so long to dry the roof in? Inside getting soaked and it’s cold outside

[@This.dad.]

You ever built a house and all the red tape just to get there??😂 not easy man. But this will be okay

[@rodneykoester3260]

Sloppy building style you got right here

[@CookieSlinger]

your anger in the beginnging of the video is cringe. control your emotions lol

[@robertlopezjr6334]

Can you use different music?? lol the generic YT music is getting played out… literally ANYTHING different

[@KaysonStevens-s1f]

You gotta stop with the terrible acting in the beginning of these videos.

[@BuildNWA]

Stop complaining. Problems are just apart of building! A seasoned builder once told me : Expect for everything to go wrong and then be pleasantly surprised when they go according to plan!

[@darrellcash4428]

Yay first!

[@Anogram]

That metal pro panel being a foot short sucks. Welcome to Trumps America

[@saulgoodman2018]

Why do you have to bring Trump into this? This have nothing to do with him. Just stop bringing politics into everything.

[@Anogram]

​@@saulgoodman2018 hey man it's Trump's America now. I'm just living in it

[@saulgoodman2018]

@@Anogram Stop bringing politics into everything. Just stop. I voted for him. But I don't bring him into everything.