The YONG HANG 300 Bar 4500 PSI "ish" air compressor. Fill Paintball and Air Rifles

[@dave1066]

The heat created isn't from friction, it's from compression. The opposite of when you use LPG and the bottle gets cold. There IS friction, but the water cooling is there to mitigate the heat from the compression. Hence, as you noticed, your bottle becomes warm after filling - no friction in there!

[@stevefuhrman1799]

I was watching your video of the young hang compressor and I seen that you had the orange moisture cylinder hooked up to the side of your young hang compressor how did you do that I'm trying to think about how you did it and I don't I don't come up with an answer so I thought I would ask you and how did you hook it to the metal underneath the moisture cylinder anxiously awaiting your reply have a blessed day

[@kevinalt1707]

Put a check valve in the line for the big bottle an you can just open it up an turn machine on

[@TPVPRO]

Do they sell an adapter with a check valve I can just put in between the two?

[@kevinalt1707]

TPV Productions just get a regular foster fitting with check valve like on the end of guns but different size from the Air Force check valve,, I got mine at Aliexpress.com

[@Technie87]

@@TPVPRO Also called a one-way valve 8mm foster fittings male

[@rico334]

Where'd you get that clamping carrier for your big SCBA tank ? I like that...... I got a nylon one off Amazon but the damn thing keeps slipping off the end of the tank.

[@stickandstring63]

do you leave the valve on your tank closed when filling?

[@waleedhaider9657]

Ser how apout pot some ais to pe compressor moor coold can wee tari?

[@jgairguns4332]

We’re did you buy the oil water catcher and what is the actual word or what is it called exactly thank you.

[@randycombs112]

Amazon and eBay has it.

[@henrydo8935]

Do you know what the oil filter catch can / attachment is called?

[@uk_familygreen]

Oil/water separator, bought one off ebay this week.

[@TophatOrange]

It has not the official name on it from Yong Heng as many on Amazon als dont have, is it still exact the same though?

[@Jeff6021-z6o]

you should open the release valve before shutting it off. the recoil from high pressure air with sudden shut off of the engine can damage the compressor's internal parts. and you dont need to wait that long to open the release valve after filling your tank.

[@RR-ty6ki]

How do you go about extending the life on a tank from 15 years to 30 years?

[@davidb.8786]

Can anybody answer this question I have the big bottle you showed on the end of the video my filter the black thing on the end of my young Hines gets very very hot when trying to fill up that big tank from empty is this normal have stop fill it till I hear something about this

[@SmallBlockTrevy]

I have a few questions that I think you are well educated In what is a good way to get ahold of you

[@bfree6197]

You should open and release the air on both the high and low sides before shutting the compressor down. It's less stressful on the compressor and helps to blow out any moisture. Also like to keep any bottles or guns above the filling station.... gravity helps any moisture to stay down and not drain down into anything

[@kevinalt1707]

Nice to see ya back in hpa 😁,, great video, I’ve had mine for 4 years now as long as you don’t over heat an use a check valve they will last a long time

[@TPVPRO]

Thanks man, that's what I have been told glad yours is lasting.

[@cilami]

Where is the check valve positioned? TIA.

[@kevinalt1707]

@@cilami you have to install an external one on the line that goes to the tank

[@kevinalt1707]

@@cilami that way you can just hook up your tank an turn it right on then turn machine on an when it gets to a higher pressure than in tank it will open up never letting that pressure leave the tank

[@g1expert102]

A radiator has... Well a radiator Thats just a Reservoir

[@oregontrailrider]

Tyler, been subscribed for a while now....have my own s10 habbit, and air guns. keep the vids coming no matter if its cars or air guns, and Amen brother on the skills to keep yourself alive.

[@FixItStupid]

Right !

[@TPVPRO]

Right on Brother. I hope the new system allows creators to mix it up a bit without fear of being shut down.🤞

[@zardozx1370]

You´ve made a very good explaining video - thx from germany - I bought my Yong Heng by Amazon .......

[@r.v.s.983]

Thank YOU ! on this tube bro !

[@Mr123pbd]

DAMMMMN i love your car vids suprrised the shit out of me when i saw u in the video for airguns!

[@Donny_Juanny]

As long as the moisture relief valve is loose, you are fine to start. You don't have to completely remove it before starting. Bleed your pressure before your shut it off as well.

[@Nickg309]

I was so disappointed when the mullet was fake ;,(

[@antonetrinh8662]

I love China