Kia Venga 2015 Flip Key Repair.

Kia and Hyundai keys suffer from blades that stop flicking out as they should, this is just wear and tear. This video shows you how to fix your key. You'll need a few basic tools plus a pin punch.
The important thing when you fix this key is that you are careful when you remove the green circuit board but more importantly, very careful removing the transponder chip. If you for the chip out of the old case it may break and then your car will not start.

[@PhanToMaTiK]

Thank you so much for this incredible and well explained tutorial!

[@TheCarKeyMan]

You’re very welcome :)

[@rachelcharris]

Respect ! That was not easy. Thanks for sharing and that's made my mind up I'm not going to try and repair my keys myself even though I'm an IT engineer 😂

[@TheCarKeyMan]

Well, in some ways that’s helped then! Thanks for the feedback :)

[@rachelcharris]

​​@@TheCarKeyMan oh yes it really did. Was not a criticism. Hat off to you not easy at all😮

[@ianD74]

Really helpful and perfectly timed for my Ceed key repair

[@TheCarKeyMan]

Excellent news, really pleased it helped and thanks for the feedback

[@ianD74]

@@TheCarKeyMan my pleasure, key looks completely original and saved about £250

[@lenco5994]

can't locate a new case to fit the key as the hole was small. any idea how i can find a suitable case to take the old blade? appreciated

[@FabiolaNunez-vw2eh]

Es normal que tenga mucho movimiento la llave que se introduce

[@ali-sleimanchehade6129]

Thank you for this video learned a lot 🙏 but is there a way to open it without braking it? Mine work perfectly but working on a small project and want to remove the key fron the remote and 3D print a case for the key. The idea behind it is that I can keep the remote attached to me without taking it of and use the key that I’ll hide inside the car to turn it on or even put it inside my other 3D printed key Swiss holder with a magnet that will hold it in place Now here is m other question: can the car turn on with just the physical key or I need to install next to it the micro controller the one you used the solder to remove?

[@TheCarKeyMan]

Hi The problem you’ll have is as follows. The car will not start unless it has the chip near it. The chip is inside the case

[@ali-sleimanchehade6129]

@@TheCarKeyMan thank you for you reply truly appreciate it 🙏 So if I understand correctly the ship should stay in the case but I can install the physical key on a custom 3D printed handle and the car will start right? Another question: if I make this custom handle for the physical key can I add a magnet inside of it? Because I was planning on making a custom box for the physical key and the key just slide in it and get held in with magnet… I’m afraid it might cause some sort on interference with the car what do you think? What would you suggest I do?