The M1E3: What has the Army actually said?

[@captiannemo1587]

As I recall swapping from copper wire to fiber optics was to save something like 1.5 ton in weight from the previous news reports which can be found.

[@tinman3586]

As a guy who works with that stuff, it might be better to go with copper. Yes, fiber is lighter and you get more throughput but copper is way more robust and we're talking about a tank, not an F-22 Raptor. But who knows. Maybe they've got a way to protect the fiber, I dunno. I'd be interested in how.

[@QuixEnd]

My god.😂 I imagine their 90s tech upgrade was fairly similar to what was in the aircraft, since it's all solid steel and weighs a shit ton. Those old cables were no joke either, it took so much more amperage to get those shits to work

[@PBmask]

​@@tinman3586 tbh, fiber isnt THAT fragile. There is going to be some challenges in design, but its not impossible.

[@einehrenmann6156]

@@PBmask modern fiber cables are actually pretty durable but some Private is going to make it his life mission to break every single one he can see.

[@DB-ku7vu]

@@tinman3586a tank only moves at 1 gee

[@oldmangimp2468]

The Chieftain has a special gift; the ability to translate Army language into Civilian, a very useful skill. It's much akin to my ability to translate Engineer to English, or other people's ability to translate Legalese into Klingon (it IS translated, but most people still can't understand it).

[@dannyzero692]

This ability of his is what makes him stand out the most out of all military KZbinrs. If someone couldn’t translate Army to Civvy well we could have another F-35 situation where the public is woefully misinformed about what its role is.

[@raywhitehead730]

Last I heard (two weeks ago) the UK has less then 60 fully operational tanks.

[@mage3690]

Your ability to translate Engineer to English is rivalled only by my ability to learn jargon (I'm a bit hyperlexic). You wanna know what's _hard_ to learn? The shibboleths (those things that just *are,* and few questions are asked *why).* My God, it is hard to learn the shibboleths. Because if you don't learn them or ask why they exist, you're branded as goofy. If they're part of your "unknown knowns", explaining anything becomes needlessly verbose as you avoid the minefield that is the shibboleths. If you make them part of your "known knowns" (or try), learning anything becomes needlessly complex as you chase down the origin of every meaningless and unrelated thing while others look on, convinced that you're chasing ghosts.

[@mckinleygoetz9855]

I was a OH-58D mechanic for 17 years. I tried to get them to replace the electronics in the back. They could have lost about 1200 lbs. The same job could have been completed by 1 man and a laptop.

[@UmHmm328]

Army equipment lurches forward then decades of inertia.

[@jtjames79]

​@@UmHmm328 These days you can use a Nano Jetson and get rid of the man.

[@glenmcgillivray4707]

I wouldn't be opposed to dropping more men back into the hull form. Easier maintenance. So a systems manager with radio access who can help watch the surroundings with cameras, mostly listening in. To go with the driver looking forward. The gunner carefully inspecting what the guns looking at. And the commander who gets radio priority but can actually give instructions and fight the tank. All with an autoloader to keep the turret lightened and smaller.

[@UpToSpeedOnJaguar]

This way of thought continues to this day with other airframes. You could likely cut 1000lbs of weight by modernizing a lot of the electronics systems on most models, even today. I'm sure most of the reasoning why it doesn't happen can be chalked up to government contracts, bureaucracy, and the aviation industry's general unwillingness to make logical progression without the prospect of a 10,000% markup on their technology.

[@belliduradespicio8009]

@@UpToSpeedOnJaguar sounds a lot like WW2 german military industry

[@reubensandwich9249]

As an American, it makes me smile that we see even our tanks as also overweight.

[@tyvernoverlord5363]

And its funny cause in Metric Ton and American Short Ton, we're one of the lighter of the heavy chunky MBT's that don't come from say: India . . .

[@BPzeropoint]

Our tanks have been visiting fast food establishments along with our troops.

[@stevenbrown8857]

I'm a brit ... n have the same problem 😢😂 I'm showing my support for you yanks 😂

[@filmandfirearms]

@@tyvernoverlord5363 India doesn't design their own vehicles, they buy Russian ones

[@tyvernoverlord5363]

@@filmandfirearms Arjun and Arjun II is what I was hinting at

[@davydatwood3158]

I always enjoy TheCheiftain when he puts his Dad Hat on and is all "okay, Internet, settle down and think." :)

[@Operator8282]

I imagine that doing exactly that with all the junior lieutenants in his battalion IS his actual job in the Army.

[@buttnutt]

Opinion of LazerPig has fallen precipitously.

[@BeKindToBirds]

​@@Operator8282Older officers are to Officers what NCO's are to Enlisted and Officers

[@buttnutt]

Read Lazerpig's KF thread if you want a laugh.

[@hedgehog3180]

Designated Tank Dad.

[@Direwolf13PS3]

Weight-saving Options AFAIK Lighter gun - XM360E1 Lighter cables - Fiberoptic Lighter turret traverse mechanism - Electric Motor Lighter electronics - Modern integrated systems Lighter tracks - Modernized tracks Lighter suspension - Hydro-gas Lighter turret - Either low-profile or unmanned turret with an autoloader

[@lord1todd]

Great video! A WWII tank vet once told me the sandbags helped calm the nerves of newer crew members by absorbing alot of the impact sounds lf smaller nonpenetrating rounds hitting the tank.

[@themightymo3491]

This is a really interesting factor that you usually don't consider with tanks.

[@30LayersOfKevlar]

According to a 1987 article in the magazine "Armor", the M1 Abrams tank uses approximately 1,000 pounds of copper. This includes the copper wiring, as well as other copper components such as the radiator, heat exchanger, and fuel lines.

[@maxo.9928]

That number has almost certainly increased since then as well.

[@theothertonydutch]

Unless they use fibre optics, which also have the benefit of being lighter. This could potentially replace a bunch of non-conducting data connections.@@maxo.9928

[@kevinsullivan3448]

You still want steel, copper, and aluminum for things like radiators and hard pressure lines, but all that wiring (including everything bolted on since 1987) could be swapped for fiber for some massive savings. Unfortunately there are officers who think they know more than the engineers designing the systems who have the final say.

[@ryuukeisscifiproductions1818]

@@kevinsullivan3448 fiber can only replace signal wire, it cant replace power cables. and in terms of wiring weight, the vast majority of the wiring in terms of weight is going to be power, not signal.

[@roceye]

@@ryuukeisscifiproductions1818 And Fiber is difficult to repair in the field.

[@johnmartin6420]

The torsion bar suspension is heavy! Each station weighs around 1 metric tons, so that's around 7 tons. Replacing it with hydropneumatic inarm suspension would save around 3-4 tons. Such suspension from Textron and General Dynamics was tested back in the 90s. Today the GD suspension is owned by RENK America, and is readily available.

[@TheMeepster72]

Pretty sure that's what the new M10 has.

[@MGCOHN]

⁠@@TheMeepster72you’re not wrong

[@christophero1969]

How about a book on APC's, with great engineering and combat-use details?

[@Rynnakkosampyla]

Comment on the "Why now?" question. Looking at the tension rising in Asia the logistic footprint suddenly makes quite a bit more sense. Possibly hinting that the same design principles that made Sherman a good tank for America during the second world war needing to be reconsidered for the current M1

[@Skorpychan]

Also, lessons learned from the big AFV testing ground that is Ukraine. Challenger 2s and Leopard 2s have been lost, and the tanks are out fighting tank battles instead of plinking unaware Iraqis from miles away in a desert, or blowing the tops off minarets to deal with the sniper in it.

[@Minigoat_92]

@@Skorpychan Yes some have been lost, but they have been lost to either mines and then artillery, mines and then atgm or drone and then artillery. I haven't seen any footage yet of any western tank given to Ukraine being taken out directly by another tank. They are all imobilised first, engaged with artillery or ATGM second. Which any tank, regardless of quality, nation of design, or any other variable, would be equally vulnerable too.

[@robmx2324]

50,000 Sherman tanks were built in WWII (around 5 years time span). Over 5,000 M1 tanks were built in the last 30 years. There were around 18 different variants built on the M4 Sherman tank. How many versions are there on the M1?

[@johndoe-so2ef]

​@@robmx2324so if we send every M1 ever built to China, we will only be outnumbered by what, about 4 to one?

[@richpryor9650]

@@robmx2324 The last 30 years have been the post-Cold War era of unipolar peace and conventional military drawdown aka. the Peace dividend. Use a better example

[@shannonkohl68]

As to electronics vs. hydraulics, I believe that SpaceX switched from hydraulics to electronics for engine gimbaling. Which presumably requires a lot of force and accuracy. So probably another indication that the M-1 would do just fine with the electric controlled turret.

[@trioptimum9027]

I very much suspect you're right and the electrics will be totally fine, but there are important differences as well. Failure is quite a different scenario, after all: -I think the engines gimbal independently? So if you lose gimbals on one engine, you can compensate with the others pretty easily. If you have the choice between nine engines with nine gimballing systems each of which is 99.2% reliable, versus a heavier system that is 99.5% reliable, and you can fly just fine with seven out of nine gimbals working... You'd probably pick the lighter one, y'know? (Play with the numbers until you get a number of nines acceptable for crewed flight, of course). But if it's a single point of failure instead of a "we can lose three, no problem, but four might cost us some missions and losing six could kill someone," the math changes, right? -The consequences of partial failure are different. A slow or off-calibration gimbal on some engines while others are working fine probably means you can't use those gimbals. A slow or off-calibration turret rotation system is still very much better than no power traverse. So if the electrics are more likely to die all at once, while the hydraulics are more likely to start to fail a little at a time, that might be worth a little more weight even though the top-line "reliability" statistic is similar.

[@uku4171]

And the electric actuators seem far better in terms of functionality. Don't know about reliability, but I doubt it's bad. Also, do you know if the flaps use electric or hydraulic actuators?

[@henrikoldcorn]

@@trioptimum9027it’s pretty catastrophic if a Falcon-9 booster is landing and the one engine it’s using for thrust loses gimbal control. Combat systems and space systems are different but they are both hard fields.

[@trioptimum9027]

@@henrikoldcorn Oh, absolutely! I was just pointing out that the challenges are different, not that one set are easier than the other. One could say the same about space systems and other space systems, for that matter. (And yeah, you could absolutely lose a booster that way... But it wouldn't cost you the mission. Might be an acceptable risk, depending on the other factors.)

[@tedmoss]

@@trioptimum9027 Properly engineered electrics are always going to beat hydraulics, you just have to do the work. Smaller, faster, stronger, more efficient. Can be redundant.

[@AlRoderick]

It's interesting to get this on the same day as Perun putting out his video about how incentives surrounding decision makers affect defense procurement. That line about investing in the plants, it isn't only a way for your local congressman to buy votes by keeping jobs in his district that literally cannot be outsourced to China.

[@johndoe-so2ef]

Don't forget about all the contract kickbacks that it's going to provide, too.

[@jonathanpfeffer3716]

It’s also just a strategic national decision. These tank plants need something to do, and if they go out of business we lose a strategically important industry that will take a long time to restart and upscale.

[@Appletank8]

Emutopia needs them tanks!

[@tedmoss]

@@Appletank8 We need them tanks, don't fool yourself.

[@Sonofthebear]

As a former merkava 4 gunner and commander, electric works just fine, better than hydraulics that we had on the mark two, in every possible way.

[@tedmoss]

Engineering people should know this.

[@michalandrejmolnar3715]

I love the Merkava 4! Such an innovative Tank, also the only operational tank with APS!

[@Native_love]

God bless the mighty Merkava! ❤

[@druid4243]

Most of what I know of the Merkava comes from it being the main battle tank of the us military in 2035 in Arma 3 for some absurd reason lol.

[@TheBongReyes]

Well, the Merkava was designed by actual tankers. Many tank designers around the world are mostly designed by engineers. IMO, I rather have tankers input than an engineer.

[@mikevars8979]

The M1A1 AIMS was not the predecessor to the M1A2. I participated in the M1A2 IOTE Test in 1991 at Fort Hunter Liggett. The AIM tank came out around 2005 as much of the Army hadn't gotten the M1A2 let alone the SEP version yet. I believe the AIM version was just a stop gap measure. Like the M60A3 was before all units transitioned to the M1. I think Fort Hood was all SEP v1 by the time many units were getting the AIM tank or maybe we at Fort Riley were just that far behind 🤣.

[@TheChieftainsHatch]

You are correct in terms that AIMS was not a successor vehicle, (I received mine off the production line in about 2007) but I don't believe that the underlying A2 technology is any different. I focused on AIMS because I am certain about it

[@DefinitelyNotEmma]

I think the M1 (or any current MBT) has still a lot of potential for future development. The basic template offers a lot to work with, by installing new subsystems, engines, maintenence friendlier options. Point being, and I could be wrong, an empty hull stuffed with brand new, maintenence friendly systems and possibly a new turret is a promising prospect for the future. Not to mention that the tank isn't just meant to fight opposing armor. It's also meant to break through defenses and provide long range, heavy fire power where it's breakthrough capabilties are needed. And something like that doesn't require a totally new tank developed from scratch, especially given how most adversaries also spend more time and money improving existing stocks rather than developing or procuring brand new systems.

[@lostalone9320]

You're right - When there is no pressing need for big change, nothing even close to a paradigm shift, then you really just want to make what you have easier, cheaper and less of a pain. Nothing wrong with that.

[@DefinitelyNotEmma]

@@lostalone9320 I think cheaper and more logistically sound are the keywords. If we're looking towards Ukraine, tank losses are immense. And that wouldn't be different with large numbers of M1s. And while the US themselves would lose less, due to different doctrine, training and logistics. It still means an emphasis should be put on the ability to easier replace components and entire tanks. Improved logistics mean that a damaged tank can be put faster back on the frontline. And I think that's much more important than a 140/130mm, heavy armor packages and even more weight which hampers logistical support. That's actually why I like the T-90 a lot. You can load lots of them onto a train, maybe two without additional armor on an An-124 and they can be produced comparatively quickly. Ideally something like a T-90M with a bustle autoloader (and blowout panels), a fuel efficient engine and shared component with other systems would be made. Something easy to produce, low profile, mobile, with a lot of parts commonality.

[@capt5656]

@@lostalone9320 The problem is, as i think the chieftain himself mentioned (or maybe someone else, don't quote me), New systems are starting to put a huge burden on these cold war designs. The thing is, you are never working with an empty hull when upgrading these designs, so adding all of these new electronic equipment and sensors, and things like active protection systems become far harder to do. And while i know the reformers are out there waiting to rag on fancy new tech, the modern battlefield has shown that lethality is increasing and MBTs need to keep pace, at least until something that can perform its role comes to replace it.

[@MyWaifuNow]

Its a 30+ year old design that's been added onto with SEPv1-4 and now weighs too much. Germany has the Panther KF51 which is a 60 ton tank with a 130mm cannon and seemingly more turret protection than the Abrams. The turret is probably the biggest problem as it's not very sloped by modern standards meaning it needs thicker armor and more weight to achieve the same protection as other tanks and the armament is likely falling behind. If they upgrade to a 130mm cannon the loader has less space and it can carry less ammo total and if they upgrade the turret face at the same time how heavy does it become? Does this 80 ton tank become 100 tons to match the firepower and armor of a 60 ton KF51? Sure they could rip out the internals like you said but that probably cant save them enough weight to allow armor and weapon upgrades matching other modern vehicles especially with the slightly dated turret face.

[@Atourq]

Germany isn’t going for the KF-51, they have their own design they’re working on with the French. The KF-51 is entirely a private venture by Rheinmetall. Also, that turret isn’t sloped “by modern standards”. That’s just an evolution of the arrowhead add-on armor of the Leopard 2A5+. The base armor is what’s composite snd on the Leopard 2s isn’t even sloped.

[@417jumps3]

Friend of mine was an Army tanker during initial Thunder Run into Baghdad. Said his tank topped 83 tons combat weight. Said he felt pretty friggin safe inside that thing!! And that was WITHOUT an IED plow!!!!

[@fabiogalletti8616]

Note: Italian Army had its "common combat engine" thing. the VCC80 Dardo IFV and Centauro-1 had the same IVECO 6-cylinders, the C-1 Ariete tank has two 6-cylinders bolted togheter to make a 12-cylinders.

[@alexisXcore93]

Thats genious

[@filmandfirearms]

@@alexisXcore93 Not really, it's a pretty standard concept. The problem is always in actually implementing it. By their nature, you rarely end up replacing your light and heavy vehicles at the same time, so the likelihood of the engine being relevant for both when needed is pretty low. Italy is a small enough country that they can do it, but major nations can't. For example, the BMP has been using the same engine since its introduction. It's good enough, and there hasn't been reason to significantly change the chassis, so why change it? In that time, Russia has also changed their MBT several times over, even trying a turbine in the T-80. A T-62 engine in a T-90 or T-80 simply wouldn't do

[@commissarcactus1513]

I saw a few miniature models of M1E3 concepts at an Army Futures Command display. They all had new turrets and two hatches in the front hull.

[@billbaggins7355]

Found your channel from a kind commenter who shouted it out on a Variety video. Glad I found you.

[@TheChieftainsHatch]

Excellent. Welcome aboard! (Didn't think Variety covered defense matters)

[@billbaggins7355]

@TheChieftainsHatch Haha you're right. It was Insider. Not sure why I thought it was Variety.

[@rdfox76]

2.5 tons of wiring. The US Army has openly stated--over a decade ago--that M1A3 will include replacing the discrete copper wiring with a standard network bus (MIL-1553-something, IIRC), resulting in a reduction of 5000 pounds of weight just from the reduction in copper found in the tank.

[@imjashingyou3461]

1553 is copper. 1553 is just a communications proticol, wiring standard, and common connectors.

[@UmHmm328]

Electric powered turrets didn’t hurt Leopard 2 tanks during the Canadian Army Trophy (CAT) competitions.

[@holoween8103]

on the leo2a6 the electronics had a tendency to overheat in hot weather and heavy load. its fixed with the a7 though.

[@brokeandtired]

A Hybrid diesel/electric main engine would make sense...Technology has come a long way since the Tiger P (porsche). Electric motors have brutal torque from the moment they start and a massive powerband, which is perfect for quickly moving a tank to speed.

[@jaeger1447]

I've read commentary from other tankers that, while safer, the L2A6 electric turret is more challenging to control with precision. Old sports car vs. new electric steering sports car type comparison...just one guy's opinion tho

[@UmHmm328]

@@jaeger1447 Likely quieter than the hydraulic pump sounds in the Abrams

[@Duskraven67]

He never said that electrics were bad, infact he brought up "the germans" as an example of tanks that used electric turret systems that worked. What he did say, however, was that 15 years ago, the hydraulic systems gave more precise control. He also said that it should be looked into if modern electrical systems still have this problem or not, and if not, replacing the hydraulic systems would drop at least 1 ton of weight, if not more.

[@meddy833]

This is the BEST breakdown of what the considerations are in designing the M1 series replacement that can fight and survive on today's battlefield I have heard. Thank you Sir! I do have a few questions because I did not hear this directly addressed. What are the options for addressing main gun effective range and target detection? Will they be using the current main gun and fire control system? Will the ability to detect an enemy first by passive means be addressed as well? Is a main gun tube launched missile system being considered? Will main gun rounds, with improved effective ranges, be developed as well? I can understand not saying anything in detail about these things but lethal effective range, target detection range, and observability of the tanks surrounding for the crew are important which I know you more aware of than me. I hope these things are also being addressed with earnest attempts are realistic improvements. Thank you for the knowledge you share Sir.

[@RG-yt6wn]

Thanks for hit'n with them straight facts, Chieftain. You're the GOAT for a reason.

[@Sofilein]

Better have room for googly eyes on the turret just saying

[@TheChieftainsHatch]

In honor of you, I promise that if the Army ever sees fit to assign another vehicle to me, I shall put googly eyes on it

[@viciousslayer]

Small detail i dont think you'll see in the comments Its not just opposed piston Its opoc, opposed piston opposed chamber The pistons fire against eachother its super cool

[@UmHmm328]

The Army will pass on it. They've been gutless about major decisions regarding MBTs for decades. Look up the AIPS program from the 80s.

[@UmHmm328]

@RobertLutece909 What went operational, and they got burned on?

[@Rono99]

That's a very dumb design simply because if one cylinder block goes down you lose two Pistons and believe me there's been times on my truck that a cylinder has just stop firing and then it runs like shit now imagine a tank, a tank that weighs 70 tons, losing two cylinders instead of one . Ya no, I really hope they stick with their turbines

[@Skorpychan]

So, like a boxer engine?

[@kevinsullivan3448]

That's just a 1960s VW Bug engine... Also, aircraft have been using Flay-4 and Flat-6 engines for a few decades...

[@watcherzero5256]

The way theyve been talking about it is a ground up redesign rather than the incremental improvement of the SEP, stripping everything out of the hull and starting again probably revolving around a new powerplant and a networked modular architecture. I dont think they will be redesigning the tracks and suspension as they will be wanting to keep as much mechanical commonality as they can for spares and logistics.

[@scottzagger]

Swapping to a hydropneumatic suspension could save something like 3t and would be worth it. It’s also easier to service and provides better stabilization, and a smoother ride that keeps the crew and equipment from being shaken.

[@watcherzero5256]

@@scottzagger Yeah I agree theres stuff they could improve like a hydrogas suspension but a lot of stuff where they are essentially locked in now as they share a common chassis with bridging units, mine clearance and recovery vehicles.

[@scottzagger]

@@watcherzero5256 We tolerate the M88 being an M48 derivative. I think it would be acceptable to the Army to move on with suspensions. They’ll probably MWO them onto support vehicles that are new builds.

[@TheChieftainsHatch]

@@scottzagger M88 is a bit unusual in that it is the only bespoke, purpose-built-from-the-ground-up ARV which isn't a tank chassis which has had the top have changed out from shooty things to cranes. M88 does share some common parts with the M48/M60 line, but not many.

[@scottzagger]

@@TheChieftainsHatch Right, my point though is that having M48/60 based auxiliary vehicles hasn’t been causing a logistical issue that causes them to be replaced. Indeed the US often operates these models in numbers comparable to entire tank fleets in other nations. They’ve been replacing them because the older vehicles can’t keep up-at least that’s the reason given.

[@genericpersonx333]

The more things change, the more they stay the same. This whole argument over how to update M1 Abrams really reminds me of the arguments over how to replace M60 back in the day. For decades, the Army just couldn't find a "new" tank that really was more cost-effective than sticking upgraded modules in the M60. We went through several promising vehicles that came close to replacing M60 before M1 finally was adopted, but every one was too complicated, unreliable, expensive, or otherwise unsuitable compared to M60. Seems like we are in the same situation now with M1. Every time someone says "we really need a new tank entirely that efficiently integrates all the technologies we have and want," someone points out that it is just cheaper and easier to put a better computer or whatever on/in M1. Until someone actually proves M1 is not cost-effective in battle, it looks like we will indeed be retaining M1 for years to come.

[@TheoEvian]

Well, as soon as M1 arrives to Ukraine you might get some interesting data from the field.

[@dm1i]

​@@TheoEvian Maybe that's a real reason for sending them. If Abrams tank will do fine, it will stay in service for another decade. If it will explode immediately in the first battle it took, like Leopard or Challenger, probably it's time to create a new tank from scratch.

[@leonfa259]

@@dm1i Attrition is a fact of war, and an Abrams is no less vulnerable to artillery tan a Leo or Challenger.

[@dm1i]

​@@leonfa259 Exactly, but still, military needs a real proof to use as an argument. Abrams is kinda more resistant from indirect artillery hits than Leopard actually, because latter has very thin armor on the sides compared to Abrams tank and all Soviet tanks. Nothing can survive a more or less direct hit though. This requires some kind of new powerful APS for the tanks.

[@TK199999]

If metamaterials continue their improvement, we could finally see a replacement for the Abrams. But only because the new tank hull will be made of entirely new alloys and so it becomes cheaper to build new hulls, since they don't make new Abrams hulls anymore.

[@HypnoticChronic1]

Gotta love that DoD word salad, I'm always amazed how they manage to say so much while simultaneously actually communicating very little.

[@116RonH]

There are a lot of benefits to switching all the copper ethernet cables in your house to fiber optic ones (more fire resistant, less emi, less signal loss over longer distances, higher max data transfer speeds, etc.). I imagine armored vehicles with advanced weapons and defense systems could benefit so much more.

[@cheyannei5983]

Honeywell also pitched a 2100? Horsepower turbine that makes something like 7000lbf of torque at peak while using less fuel than the 1500.

[@anewstarttoabrokenlife8662]

It doesn't help when you can track the tanks heat signature from satellites. This was proven in the gulf War, it's time to move away from the gas turbine tank.

[@josephsteven1600]

This is really cool. Thank you Chieftain, it's always fun for me when logistics and sustainment are explained. The latest developments in modern AFVs are super. Hope you had an amazing day filming.

[@MLN-yz4ph]

As someone that worked on tanks back in the 80's and has been working on industrial controls up until now this is a good thing. As good as the M1 is it would be so much better to green field the new MBT. Now they do not need to go crazy but take everything that works and start from the ground up for it to be in the system. If there is a better power plant use it, better main gun use it. In the end just do not lose sight of the fact that everything breaks and war is hard on equipment.

[@MJS-lk2ej]

basically the army Generals walked up to politicians, pointed to the Russo-Ukraine war and said "see, our predictions were right" and the politicians proceeded to hand over the money the army had been asking for over the past 3 years. 14:50 I suspect this is because they might not be entirely sure either way right now.

[@andrewreynolds4949]

My uneducated guess is they won’t go for an unmanned turret. Maybe a two man turret with auto loader, but not something AbramsX style. This seems like a good medium approach between the more minimal, short term SEP v4 and the wholesale replacement program that’s been in the background for years. With the v4 cancelled and this announced I’m rather expecting the NGCV’s Decisive Lethality Platform to be cancelled or quietly shelved for another decade or more.

[@Yuki_Ika7]

Agreed, so like Commander, driver, gunner and drone operator or something like that and a cassette autoloader like on the leclerc (besides the drone operator)?

[@scottzagger]

@@Yuki_Ika7 Putting a drone operator in a tank doesn’t make sense.

[@andrewreynolds4949]

@@Yuki_Ika7 Probably either 3-man with commander and gunner in the turret and an autoloader, or 4-man like they have now. I don't see them trying to add space and weight for a drone operator with their focus on weight reduction. Better to store more fuel, armor, ammunition or something like that. I don't really know what they'll go for, just making a guess at it

[@lewiswestfall2687]

Thanks. Good thing they are thinking ahead.

[@GreenBlueWalkthrough]

Great breakdown! Which finally! A new frontline tank seems pretty important and was kicked down the road for so long that the Air force and navy will both have their new toys long before the army has a new tank...

[@AndrewOptimusMaximus]

Lol bit of a Freudian slip at 13:17 🤣

[@ihorbychkov8742]

Nicholas , thank you for an informative video , as always 👍Keep up doing awesome content! Greetings from Ukraine ! 🩵💛

This Video shows the value of this channel. Just the chieftain infront of a tank putting things into perspective. I was wondering why there wasnt a program for a truly "new" tank in the works in the US, now that seems to be settled.

[@JohnRodriguesPhotographer]

Great video Chieftain

[@andrewreynolds4949]

For an update, as of the issuing of the design contracts, the Army says they intend to push the weight below 60 tons if they can (although that’s awfully ambitious). They will begin testing on an autoloader, and it does sound like they will be replacing the turret traverse with electric controls. Power plant and crew arrangements still seem very up in the air.

[@watchman0062]

What do you think the chances of an unmanned turret are? Gotta keep up with the times after all...

[@andrewreynolds4949]

@@watchman0062 As of more recently, it sounds like the brass is heavily looking into it, even enthusiastic; though I'm skeptical over whether that's really the best solution. I'd push for a 2-man turret instead, but of course I'm just an enthusiast... They also seem to be pushing hybrid or electric powertrains, for "environmental reasons" (at least in what I've read). That I believe is a stupid decision; batteries add extra weight, and large modern ones tend to burn very, very hot, a very bad thing for a tank facing significant attempts to blow it up. I'd go with a not quite entirely diesel setup, using that Advanced Combat Engine they spent so much money developing. A little bit of battery to keep the lights on while hiding hull down would be useful too. The other issue I have with the project is the extended timescales they've set; a more conservative upgrade would, I expect, get a good enough vehicle out more quickly yet retain the most important upgrades, with less project risk. Then focus on revamping the terribly outdated, increasingly outranged artillery arm. But hey, what would a civilian like me know...

[@QuixEnd]

Those old terminals are like a block of solid steel. Just a 6"x6" screen and casings gotta be a few hundred lbs😂😂 i'd love to know how much the tech gutting weighs, id make a guess with the aircraft but tanks I got no clue

[@errortaptoretry6019]

I like how when the Cheiftain says “they aren’t saying”, the closed captions says “they are insane”.

[@jarink1]

Could you give a possible explanation of why the Army used the nomenclature "SEP V1, V2, V3" instead of using M1A2E2, M1A2E3, M1A2E4?

[@redbasher636]

I think the SEP was the name of the upgrade package, like TUSK.

[@UmHmm328]

​@@redbasher636Cause like the MBT program itself going back to 1992, the Army is very confused about a future MBT. Assuming it even wants one.

[@ARCNA442]

"E" is used for experimental modifications, not fielded equipment. If the M1E3 is accepted, it will become the M1A3. The SEP variants are considered upgrade packages for the M1A2 rather than modifications to the base tank.

[@hegoyyoutubination]

because this denotes the vehicle itself and upgrades it has been though. The same way as: M60 (vehicle) A3 (modification) TTS (upgrade package) M2 (vehicle) A2 (modification) ODS SA (upgrade package) M60 (vehicle) A1 (modification) RISE (upgrade package) M109 (vehicle) A6 (modification) PIM (upgrade package) etc.

[@barrag3463]

'E' used in that way means some kind of modification to the hull that is a change to the hull that is big enough to make it different but not big enough to justify being a different production model (the 'A'). The SEPs are upgrade packages that are addons- they can (and probably are) put on or taken off as needed, but either way the M1A2 under is the same as an M1A2 without it. We're probably not going to see another M#A#E# something because doing modifications like that is at best a bit confusing for logistics. As far as I know the only times we did that was during WWII and the Korean Tank Scare because we were willing to put up with logistics hiccups if it meant we could have more factory lines producing more tanks, even if they had differences (and even then not every difference justified a different designation).

[@paullakowski2509]

Awesome as usual....we're lucky you're still here & functioning ...stay healthy!!! 😁😀🙂

[@krisdewit6389]

A technical question. When you replace the current m1 turbine for a abrams-X ACE egnine, do you create problems with the transmission the abrams has now?

[@tealshift2090]

Pretty sure that would require a whole different transmission. Idont see the way a turbine vs combustion engine works being compatible with the same transmissions.

[@scottzagger]

ACE would be paired with a new hybrid 32 speed transmission. You can’t interchange transmissions meant for diesels and turbines.

[@j.f.fisher5318]

Hybrid is effectively a transmission, and has been used for that purpose since shortly after WW1 though the technology needed to mature.

[@krisdewit6389]

Thank you all for ansering

[@frankgulla2335]

thanks, Nick, for another great video on current military maters, making sense of the press releases and giving us insight to the true "world of tanks."

[@stalkingtiger777]

Until there's a tank in front of me, I take all these announcements with a tablespoon of salt. You never know when Congress decides for new defense budget cuts. Thanks for the update though, breaking it down piece by piece was helpful.

[@jimmiller5600]

Plus the Army has spent almost 30 years spending $BB on "new army vehicle fleet strategy". Cancelled it twice.

[@UmHmm328]

@@jimmiller5600 If you think it's just FCS and then GCV, you've missed ASM from 1990.

[@jimmiller5600]

@@UmHmm328 My gawd, I skipped one. Anytime I laugh until I bleed at the F-35 fiasco somebody mentions the Zumwalt, LCS and Ford. So you're telling me that the Army is 0-3-0, while the Navy is 0-2-1 and the AF is 0-0-1 and therefore the winner with a single tie?

[@UmHmm328]

@jimmiller5600 The Army is minimum 0-3 on just vehicle programs. Comanche, anyone?

[@jimmiller5600]

@@RobertLutece909 But tanks may be way down the priority list. Economic warfare is way more economically successful.

[@Allan_aka_RocKITEman]

Great video, Nick...👍

[@kyee7k]

The question that hasn't been asked is why not start a new program to build a tank from the ground up instead of a major upgrade that has the potential to replace almost everything within the M1 hull?

[@StromBugSlayer]

@@billyparker5974 I agree, and they get cancelled because the Pentagon had completely lost it's ability to control development costs. This way they will lose SOME of their wish list when the costs spiral out of control, but still end up with a (less capable) vehicle.

[@fabiogalletti8616]

find the ForgottenWeapons video about the Fusil Automatique RSC M1917. The French Army fielded that as an upgrade kit from Lebel. You took the lebel, throw it away except the front band and a couple of bits, add the bits to the RCS and, presto, here is a cheap, upgraded rifle way more economical than a brand new rifle. This M1E1 sounds more or less the same: it keep maybe the hull-thub and the return rollers (or the greasepump track tensioning, much to Chieftain disdain), everything else is something new. But is just a budget-reasonable upgrade, not a totally new tank program, in the PR leaflet.

[@ameritoast5174]

@@billyparker5974 I also think they are worried about development time. This would probably much cheaper and faster to implement. If the US gov is worried about a war with China in the next ten years, cutting back on the weight and logistical support needed for an abrams would help ease alot of concerns.

[@History_Coffee]

Former Abrams mechanic and I'd be interested to see what the maintenance is like on an electric vs hydraulic turret system, sounds like it'd be a lot easier than dealing with hydraulic fluid lines. And as to the weight and recovery, we had an m1 aims ed flip upside down in a canal in iraq and sink in the mud. It took 5 m88s and a week to get it out and it tied up damn near a company's worth of personnel. Those extra tons make their presence known and if that tank was an a2 we'd probably have had to thermite it and leave it

[@USS-SNAKE-ISLAND]

Damn. Bridge collapse under it? (I hope the crew got out! My great uncle died in Korea that way, bridge collapsed and his Sherman ended up upside down in a river.)

[@ico9750]

It would be very interesting to see an Abrams with an Armata-ish looking modernisation. Longer nose and all.

[@andrewreynolds4949]

There’s a lot of details in the Armata that are somewhat lacking, but the overall concept was solid if extremely ambitious for Russian defense industry capabilities

[@tambarlas5248]

Am I the only one that read this as "... Amish looking modernisation"?

[@andrewreynolds4949]

@@tambarlas5248 That's an 'interesting' image!

[@maplearrow1842]

@@tambarlas5248a tank that has wooden wheels, is towed by horses and fires cannon balls 😂

[@faithnfire4769]

@@tambarlas5248 Flintstone drive system comes standard

[@youngrhop]

For weight not mentioned - Suspension : High-hardness-steel torsion bars to ISU = 2-3 Tons - Tracks : Steel --> Rubber = 1-2 Tons

[@nemisous83]

AbramsX honestly seems like the most logical choice however the Army needs to decide if they want to go to a fully unmanned turret or a manned turret. The former seems more sensible since it would reduce the most weight. Also more weight could be shaved off if they replace the interior of the turret which is optionally manned with more systems or delete it entirely and save more weight.

[@anonymous-ml8sl]

Keep in mind AbramsX was a technology demonstrator so whatever the army gets would likely look drastically different. AbramsX was essentially “hey look what we can do if you anted us to”. As for unmanned turrets, from someone who has talked to German soldiers, and 2CR guys with dragoons I’ve heard nothing but hate for them, the ability to have direct access to the gun and the tc to be able to pop his head out and look around from what I’ve heard outweighs the advantages. This is all conjecture but I personally believe we will see something with an auto loader, as robotics have sky rocketed in the past 5 years in capability.

[@grgr105]

@@anonymous-ml8sl The thing with unmannned turrets and the crew comforts was already known before they were adopted in the various militaries. The goal of unmanned turrets is to make the vehicle safer, something which soldiers in general service generally don't notice, as they aren't shot at with HEAT shells that impact their turret. The fact that with unmanned turrets you can completely isolate the crew from anything explosive is incredible, if you care about the lives of your soldiers. And I as a German generally have heard nice things about the Puma. The soldiers may often complain about it, but the complaints I hear are less about the unmanned turret and more general vehicle design. Complaints I hear are mostly about the small turret magazine (you need to reload after 200 30mm rounds), overengineering and over-complication, plus bad training about how to repair the vehicles.

[@nemisous83]

@@anonymous-ml8sl well autoloaders have never really been complex it's just a simple ramming arm however the MGS made it needlessly complex. Having access to the gun is largely unnecessary because if there was an issue that required the crew to open up the autoloader in combat it's more likely they would simply break contact and RTB for repairs than waste time trying to manually load the gun. However the main reason the commander would want to stick his head out of his hatch is to guide the driver but AbramsX has a back up camera so the crew has full situational awareness. Both M1 TTB and T-14 were well received by their test crews and there isn't any mention of the commander feeling he was blind or didn't have good vision. But people have been debating this for decades with things like gunners auxiliary sights which most modern designs of the 21st century have since deleted.

[@centurion1945]

​@@nemisous83there's a lot more in terms of situational awareness you get from having the TC with their head out the turrent, than just easier reversing. Having full use of your peripheral vision, as well you're other senses (sound, smell, feel do in fact subtly inform a TC's awareness of the surroundings) there's a reason why a TC today is very rarely fully "buttoned up" in the turret, they'll have their head out the hatch more often than not. I would he very surprised if the Army goes for an unmanned turret. Going to an autoloader and 3 man crew seems more likely, although that would also necessitate larger changes in a tank units MTOE, as the Army also currently seems to regard 4 crewmen to be the minimum for reliable field maintenance and watch, plus many tanks will at times be a crew man down due to illness, injury, leave, training needs, etc. Chieftain has been a big advocate for mirroring French armor formations which attach full time dismounts riding in trucks to the formation, who aid in repair, keeping watch, and other field duties.

[@anonymous-ml8sl]

@@grgr105 sure it may protect the crew… but I’d much rather be able to access my gun and get it up if it malfunctions to engage the enemy rather than climb out to fix the damn thing. But I’m bises as hell since I’m a brad guy. As for German troops complaining, I got the privilege to watch a puma gunnery and I noticed that the gun malfunctioned multiple times and they had to expose themselves in order to fix it. After talking with the crew afterwards he went on to complain about how every time the gun malfunctions he has to be exposed. Now all cannons like this malfunction the difference is in my Bradley I’m protected inside my vehicle and have complete and easy access to my gun to get it back in the fight asap. That’s just my experience and two cents on it

[@recce8619]

Some top class armour waffle from Chieftain, making a lot of sense.

[@kenibnanak5554]

Interesting. I suspect the war in Ukraine is making many weapons designers go back to their drawing board. Coping with drones and things like a Lancet missile have to be high on the list.

[@sir_vix]

I don't know about that. Is a lancet or any other conventional loitering munition (which is to say, not using an exotic mode of attack) substantially different than, say, an atgm with a top-attack profile? At least from the perspective of the designer, who isn't necessarily having to account for the secondary factors of drone delivered weapons (such as the moral impact of pervasive, airborne individually directed explosive devices). It seems they have much the same requirements as they had before - how to keep the explosions going out of the tank rather than into it. If anything, they could improve in Ukraine by doubling down - being more armoured/protected and having more powerful guns/munitions, since they have proved most viable at stand-off ranges acting like massive sniper rifles. Now if you were talking about strategists and planners, or even designers working on other categories of systems, your point stands more confidently.

[@p_serdiuk]

​@@sir_vix Top attack is at least somewhat predictable, but consider that FPV kamikaze drones can impact literally anywhere on the tank at any angle. That could be important. Otherwise, tanks now need to have some EW and radio surveillance tools built in IMO, as well as their own drones.

[@kenibnanak5554]

@@sir_vix I think Lancets and Vikhr missiles or similar long ranged ATGM systems are a major threat any system designer needs to think about. Certainly as you say keeping the explosion outside the tank is desirable. Also desirable is some way of knocking them down before they reach the tank. I think it is just a matter of time before we start seeing large flocks of networked anti vehicle (or anti air) drones with an AI controller drone somewhere in the middle or edge of the swarm selecting targets based on heat signature or other detection methods. No on the ground human controller, independent once launched until the fuel is expended..

[@dm1i]

The only way to protect a tank nowadays is the APS. And it should be a new APS, current version of Trophy is not sufficient enough.

[@fabiogalletti8616]

not sure. I'm pretty confident that an anti-drone/loiter ammo WAS on the drawing board from long ago. The russian aggression to Ukraine is finally ringing the bell. Armies need the budget to take that thing from floating around drawing boards and prototypes into a real system fielded on every tank, and as soon as possible.

[@ThorandSharon]

Informative and interesting as always! Thanks for posting another great video.

[@chrisbacon3071]

Abrams X = test bed demonstrator. simplest way of putting it.

[@Articulate99]

Always interesting, thank you.

[@CobraDBlade]

While I'm sure they've thought about it already, I'm wondering why if they are looking at service past 2040 and are already looking at the cost of retooling production for significantly redesigned components, are they not looking into a clean-sheet design that puts forth everything we have learned about MBT design and expected capability? Surely a design from the 2020s would be more relevant on the 2050 battlefield than a remake of a design from the 1970s?

[@andrewreynolds4949]

My guess is this prospective M1A3 is a middle ground between a short term, less expensive SEP v4 package and a long term, much more expensive totally new platform. The Abrams hull is still solid, so as long as everything can still fit inside (and there aren’t any signs yet that it can’t, as long as the internal systems are replaced as he describes) there’s not much advantage in designing a new hull, with the time and cost that would require. Even if they replace the turret with something completely new most of the hull will still be pretty much the same

[@Skorpychan]

Because if they start trying to build a new tank, it'll be ready for the 2050 battlefield in 2070 or so.

[@dennis2376]

Thank you.

[@Jay-ln1co]

The more things change, the more they stay the same.

[@UmHmm328]

Things haven't changed that much either.

[@Operator8282]

War. War never changes...

[@StephenAgneta]

Fantastic video thank you.

[@WeirdSeagul]

When the design is finalised does it become M1A3 or retain the E

[@UmHmm328]

M1A3 has been a designation that's been mentioned for ~35 yrs. Operation Turtle

[@jarink1]

I believe it switches to A when it is adopted as a "standard".

[@ARCNA442]

It becomes the M1A3 or the M1A2 something or other like how the M4A3E3 officially became the M4A3(76)W HVSS when it was accepted.

[@hlynkacg9529]

In theory E is experimental A is accepted for service, but it's been a while since the army actually abided by its official naming conventions

[@Ally5141]

It should be M1A3

[@fredorman2429]

The Chieftain makes the murky clear.

[@thralldumehammer]

If an engineer could design something that was easy to work on, I would actually be impressed. I used to be a mechanic.

[@bleachorange]

Sometimes the things they come up with are stupid. Also, sometimes, the things they come up with satisfy a last minute design change by a board member or general who desperately needs X feature to really make the product go. But having several engineer friends, its often a matter of the design environment. If they want something simple and easy to work on, thats actually not too hard. its usually when they also want cutting edge technology and have a complicated decision making apparatus or regulations to comply with that things can go sideways. But you also see successes by various companies as well, and usually these have engineering teams with their eye on the ball and their management is in vision lockstep with them on the main design principals. defense (vs civilian firms) usually has an issue with this since most civilian products are internally developed from needs to market whereas you often have multiple different bodies that have design input on military hardware (design firm, pentagon, politicians, at a minimum).

[@louisgordon4388]

If it's easy to work on, it's probably less effective. All design is a compromise, for something to be simple it often has to sacrifice something else.

[@garyswift9347]

thanks yet again

[@janwitts2688]

One of the easiest ways of reducing logistics issues is to upgrade the entire service and immediate reserve fleet to the same spec..

[@iivin4233]

These videos always generate a large amount of questions.

[@UmHmm328]

A lot of the “new” things for an MBT were being developed since the 80s Heavy Force Modernization plan. Can someone make a decision? Show some guts!!

[@luis9308]

In the 80's, Abrams endured a big loss against the Brazilian Osório, which was just better. Politics aside, when I look at certain Abrams characteristics these days, it feels outdated, or perhaps it's me that doesn't understand in fully the modern doctrine the mechanized vehicles are enforced to. And the weight case is very sounding, based on what Glenn Dean has said recently. Seems to be some guys out there may produce things that doesn't need to be high tech to deal with the Abrams. That's my two cents, and I'm sorry for whatever thing I may get wrong. Any clarification will be appreciated.

[@voltaire1296]

@@luis9308hello Val

[@shittinontheceiling3474]

​@@luis9308I'd say that indecisiveness isn't the only huge hurdle: the other main "problem" with the Abrams is that it was developed in an age where drones (especially cheap ones) weren't really a thing and many now avaiable technology weren't present: much like 4th gen fighters you can upgrade the system for a long time and actually make it much better than the original version, but after a while you just NEED a new base, as a starting platform can only take so much

[@Michael-wo6ld]

Well, it turns out that when the only peer power in the world implodes and you switch focus to counterinsurgency, MBTs stop being such a priority upgrade.

[@luis9308]

@@shittinontheceiling3474 Makes sense. It's really due time to change. This E-version is interesting. Since the base of the tank proved to be a good hit, rebuild it from there. It's a good approach to do, considering how much of the old and heavy tech now has been replaced by things that are the size of a hand, or way smaller (an smartphone and it's own components).

[@GenMaj_Knight]

Do you have a chart of different weights of Abrams models by configuration?

[@kamikazetsunami9137]

Notice me senpai!

[@TheChieftainsHatch]

Greetings, grasshopper

[@GG-jm6gi]

thanks for the vid!

[@JakeTheTankmaster]

Hope to god it'll called M1A3

[@DefinitelyNotEmma]

M1A2E3 would be funny

[@sIightIybored]

@@DefinitelyNotEmma Give it a while and they'd have the M1A2E3V4

[@DefinitelyNotEmma]

@@sIightIybored A worthy opponent to the Leopard 2A10V5 Ausf. G (130mm) and T-90UBMV

[@tealshift2090]

@@DefinitelyNotEmma Please dont bloody encourage them or give them any ideas.

[@tealshift2090]

If they choose to follow the army nomenclature system the E stands for experimental modification version, then after it is approved it would get an A number as those mean its Successive approved modifications (A1, A2, A3, etc.)

[@gilevi]

Love the random drip pan under the track

[@cordellmohawk8408]

Future tank needs be able to hover over mines and a rail gun

[@k53847]

The other issue with the Abrams is that, for reasons I don't understand, the weight and the bridge rating diverge dramatically above 70 tons. So a SEPV3 with FP kit, APS and ballast weights 81.43 tons but needs a 104 Military Load Classification bridge. Which is why the MLC of new bridging the army is buying seems so absurdly high.

[@mikes.4136]

Fiber optic would be a better replacement for hydraulic controls. It’s more resilient than electric and lighter still.

[@mbr5742]

We are talking about Motors rapidly moving a multi ton armoured box

[@alpacaofthemountain8760]

Great video!

[@steveturner3999]

Alright guys over 300 watching but only 11 thumbs up! Hit the button!

[@germen343]

No

[@petesheppard1709]

I've hit the like button, then it apparently blanked out when I clicked away from the video. I've started double-checking.

[@Hugh.Gilbert]

83 Tons? The British Army reckons that is a rookie number!

[@Waltham1892]

The Chieftain is standing in front of the American response to the T-14. The armor is made of depleted Vibranium, the gun will penetrate 6000mm of RHA at 1.3 parsecs and we are going to build 12.000 of them. See Russian fanboys, two can play this game.

[@misterjones7248]

Win!

[@Marin3r101]

The absolute lamest comment I have seen in some time. That is the "win".

[@melgross]

Fiber optics isn’t the same as copper. So it depends on what they would be swapping. Fiber is good for communications, but I highly doubt they would have over a ton of copper just for communications. Most of that would be for power, and for that, you can’t substitute fiber.

[@UmHmm328]

Not even a new MBT fresh start. More Abrams leftovers. Just a newer microwave. Horrific.

[@DefinitelyNotEmma]

Why is that bad? There is no need for a completely new MBT

[@UmHmm328]

@DefinitelyNotEmma But apparently, there's a need for a completely new partner vehicle for the MBT, the XM30. 30+ yrs of MBT inertia

[@zeitgeistx5239]

@@DefinitelyNotEmmathere is because the Abrams is so obese. If your designing a new turret then your are already half way to a new tank design.

[@tinman3586]

I mean, technically the WWII-era M26 Pershing was the basis for all our medium/MBT designs until the Abrams. Tanks designs, like the tanks themselves last much longer than that of fighter planes.

[@jebise1126]

@@zeitgeistx5239 maybe this time new turret and in 20 years new hull...

[@brabblemaster401]

IDK why they wouldnt add a lightweight 30mm on top. Combat in Ukraine has shown that Lancet drones and quad copters are doing some damage. Now if you could slave in the gun to the same radar as the APS you have a better defense against them over the 50 cal. But depending on the APS used it could be irrelevant if the APS is designed to defeat drones as well. AD assets mobile with the formation are good and needed but im unsure if they could provide the coverage one terrain feature back to defeat said threats.

[@rohesilmnelohe]

10:35 that subtle burn on Moskva❤

[@KenshiImmortalWolf]

This is neat to hear, someone who translates military PR into civilian speak and focus not only what is said but what Isn't. But the idea of the E3 being a complete gutting of the Abrams makes sense, the advantage is that older Abrams can be gutted and refitted so production can focus on the new components while the older ones can be recycled while keeping the tanks in active service.

[@Track_Tension]

"Why is this being done now?" The US federal government has no budget limit until 01 Jan 2025.

[@illogicerr3769]

I absolutely love the look of the tank Chieftain is standing in front of. Don't know anything about it other than it looks great.

[@TheChieftainsHatch]

M1 TTB

[@ThinkingFingers]

I'm just kinda excited to see what they come up with. In my lifetime the U.S. hasn't rolled out a new MBT, and while this is still an Abrams I think it will be fun to see.

[@KabodaOfficial]

13:17 Haha, that got a good chuckle out of me!

[@saltykrug]

I can appreciate the weight and cost saving of switching from copper to fibre optics. It would make all sub systems faster as well because of the quicker electronic "talking" to one another. As old as the Abrams is, it is high time they did a ground up change as opposed to the long string of add ons. I can't imagine a long list of bolt on upgrades is the most efficient way of doing things especially when redundant communication devices have to be installed. I think E3 is really the way to go.

[@yebois_8036]

great content as always, i had not thought about all the ways you could reduce the wight of a tank without reducing capabilities by removing and replacing outdated systems.

[@echoredfour]

Great update

[@sleepygryph]

When you need enough upgrades you could design a whole new tank. It makes sense they not only get a new tank but spin-off they can use to upgrade existing ones. The defense industrial base is not just an American thing, several countries that are upgrading their air force internally rather than buying from the US in order to maintain their ability to produce an air force. I just can't get behind the "reduced" logistics foot print. It'll will ultimately reduce the capability of the tank. The other problem I already foresee since we already have it with our planes and other weapons systems is contractor only maintenance. There will be a lot more items on the tank that require it to be in depot and worked on by a contractor or pulled by a contractor and sent to a central location to be worked on by more contractors. It is a system only feasible in a peacetime army with equipment not intended for sustained combat. Worse is that now that it is official, there is nothing the Pentagon hates more than spending money on stuff on it's way out. In the next few fiscal years you'll see them cut the funding for maintenance and upgrades to the current tanks because the new one is "just around the corner" and spending money on the legacy systems is just throwing it away. So we'll be seeing a drop in readiness.

[@Lonewolfmike]

I have been shaking my head when I see people saying the Abrams X is the new Abrams when it isn't. The maker of the Demonstrator, I repeat Demonstrator, GDLS said that the Army will like some things and not like others. It is NOT the replacement for the current Abrams.

[@cdburner5911]

Here is my dream list. Switch to hydro-pneumatic, which shrinks the chassis ~4" by removing torsion bars, also allows squatting and leaning of tank. Switch to 3 man tank (0 man turret), smaller, lighter turret. Light weight gun. New diesel, with hybrid power system, coupled with all electric turret controls, which should help thermal signature. Hardkill APS, because ATGM is probably the biggest threat on a modern battlefield, lets be honest. Maybe rubber tracks? Not convinced they would work for a MBT weight vehicle, but it would be worth testing, as the benefits are pretty good. And an idea I have had for a while, a 20-30mm remote weapon system. If it had distance fused rounds, with a dual fuse mode, one for radial frag pattern, one for forward cone pattern, it would DRAMATICALLY improve utility of a tank in urban and trench settings. Laze a trench line, add 1m, sweep the top with frag rounds, job done. Or over a wall, or on a roof, or through a window. Use the forward cone frag pattern to clear vegetation, or swiss cheese light armor, or even blind enemy tanks by destroying optics. Also, if it piggybacked off of the APS radar (or had its own) it could easily pull double duty as an anti-drone weapon, or maybe even a backup APS if it was fast enough. For a no-man turret, I think we have sufficiently advanced cameras that its now reasonable to think that with several pan/tilt/zoom and several fixed cameras, the 3 men in the hull would have similar situational awareness that a manned turret would, and maintain some redundancy. Plus a non-manned turret would take up a lot less internal volume, and save a huge amount of weight in armor. This should also help improve crew suitability, as any top down attack is more likely to aim dead center and there won't be any crew there.

[@randymagnum143]

13:18 sounds about right. But, good news for Lima?

[@stevevernon1978]

at least TWICE in this video, the (auto-generated?) captions have transformed "They aren't saying" into "They are insane" which is a HELL OF A BIG CHANGE... I don't know if Nick can fix this, but it definitely needs fixed if possible.