FOLLOW ME ON INSTAGRAM! @thecraig909 @carrnagge - SEND ME STUFF! (If you want) TheCraig909 P.O. Box 362 Ramona, Ca 92065 - Music by Carbon Citizen
Пікірлер: 235
@young119843 жыл бұрын
I would have had to grab that old grill shell for wall art if nothing else
@wyohotrods3 жыл бұрын
The grill in the bed of that pickup was from a 60s dodge.
@albertgaspar6273 жыл бұрын
just about to post that...
@davidhenson33723 жыл бұрын
66 dodge
@franciscomonroy4084 Жыл бұрын
@@albertgaspar627😮
@trentontaylor54473 жыл бұрын
Those beams you bent with a torch are now super fragile!!! You’re only supposed to cold bend I beams on these old fords.
@purplemonte13 жыл бұрын
Was going to say same thing!!
@GreenDragonPainting3 жыл бұрын
Man this made me want to throw my sandwich on the floor and head to the junkyard 🤣
@WhyBeNick3 жыл бұрын
You guys might already be planning on it, but I would definitely plate those beams. They're beefy, but they do bend if you really beat on them without reinforcement.
@braedengraham22683 жыл бұрын
I’m in high school as well and I’ve got a lifted ‘71 f100 on 35’s with a built 352, cammed up, open headers, 850 Holley carb which is being rebuilt by my girlfriend’s dad at the moment but besides that it runs great. It’s awesome to see another high schooler that wants to build something instead of waiting for mommy and daddy to find one..... Love the truck man
@andystreets46603 жыл бұрын
I have been using the new edge mustang v6 t5s in my last couple of builds. The 3.8 bellhousing bolts directly to a small block. You have to use a truck flywheel, clutch, and starter but other than that it works good.
@FordFanatic8653 жыл бұрын
Best part of the day is when I get the notification that Craig posted a video 🤟🏼
@pinstripingbybear.3 жыл бұрын
@6:30 thats a dodge truck grille like a 60tys power wagon grille
@samthelegoman39903 жыл бұрын
The ground or the floor?
@mromatic172 жыл бұрын
That is a good idea craig when i start restoring my daily driver 1994 f150 ill go and collect the vin tags off of junked ford trucks. you are right that they can’t even be restored cuz once the truck is junked they delete the vin off the record and its the only tangiable.
@spencersand27543 жыл бұрын
I want all those old ford pickups 😍
@wbrandes66263 жыл бұрын
Yall should get me them headers for Christmas😂 I need them for my 460
@physkogamer71393 жыл бұрын
18:32 I NEED THAT BUMPER. I need that front bumper for my 75. That looks like its in such good shape
@ClassicGBodyGarage3 жыл бұрын
No rust anywhere! Damn you boys are lucky to live where ever you are.
@charleswoodbury3883 жыл бұрын
Good find can't wait to see what you do with it
@backyardmechanicrestoratio69583 жыл бұрын
11:50 that car would be a clean drag car build ngl makes me wish i had the money and lived in the states sometimes
@abelvillalobos78523 жыл бұрын
D100 65-67 grill!!
@foxhillhomestead34443 жыл бұрын
I'm a huge square body chevy guy but I love galaxy fords and really like your f100. Really enjoy your content.
@beardedscrapper5383 жыл бұрын
That truck is sick.
@AncientAir Жыл бұрын
My favorite place to scrap for rarity’s… PYP West. Used to be named LKQ.
@fullsendsornosends11763 жыл бұрын
If i gota dotsun it would probably have a v8 in it... the rotsun mk2
@michaelmogan47083 жыл бұрын
Grill is from a 65.5 to 67 dodge truck. Remember the pie pan lights. Ugly grills.
@kennethporst4359 Жыл бұрын
We need more people saving these GEMS uuuhhh🤕🥺
@Z3CHYD3 жыл бұрын
Man I need to get to my local big junkyard now lol
@dk8320023 жыл бұрын
It's because the gm t5 doesn't have a spot for a trans mount because the body uses the torque arm
@dominicbrinas54663 жыл бұрын
I just picked apart that red and white bullnose the other week 😂
@ameliaalvarado52653 жыл бұрын
What pick a part is this
@dominicbrinas54663 жыл бұрын
@@ameliaalvarado5265 its in Chula Vista
@thisyoutubechannel3107 Жыл бұрын
Craig I'm willing to bet that dually had a banks power pack or something like that.
@jcfireman22153 жыл бұрын
That first rate porosity in that weld on the spring perches.
@andrewstevenson51553 жыл бұрын
yes i love the 240z and my 280z i would definitely watch videos on that. and on another note why are your junk yards so good cant find anything old in my yards its usually all new cars :(
@danielheartsill42693 жыл бұрын
I wouldn't put money on it either but the grill looks like a Dodge van from the sixties. It didn't stay in the camera for long and didn't get to see the whole thing, but my guess is Dodge.
@mikeobrien37443 жыл бұрын
Dodge truck/van grill. 1966-677 dish headlights. Popular style, don't ask me why.
@Robrt323 жыл бұрын
I wish we had yards like that around here. Everything pre 90’s has been hauled to the crusher.
@codyreynolds63333 жыл бұрын
Buy that grill insert on the black truck and I'll buy it from u I need bolth sides if they are good and find me a ashtray lol I like original stuff
@trevordevins10423 жыл бұрын
Get that 460!!!!
@giftdcam84723 жыл бұрын
That camaro was a world class.. I’m glad you called the guy lol
@texjake33 жыл бұрын
Dude, I need those headers off that blue Camaro. I need them for my Vortec heads. I'll pay you to shipped to me in Texas!
@jeromewieland55 Жыл бұрын
Shorty headers make about 2hp over a set of manifolds. I’d find a good set of long tubes because it’s not worth the money or time to do a set of shorties on anything.
@taylorward42053 жыл бұрын
Got that same KING hat 👌
@tommyhall3503 жыл бұрын
If you get a chance to look up maple motors Henderson bill TN look at the 64 ford white it is for sale go to u tube check it. Out you will like it very nice
@chevylandt.v3 жыл бұрын
Oh dang my Friday just got better. Is that white dentside grille good looking for both iner and outer for a 73 -77 f100.
@joey6119 Жыл бұрын
That truck is begging for a stroker 351 Windsor 408 or 427 sweet maybe 396 or 8 I don't remember
@farmerjordan19 Жыл бұрын
Okay if your looking for a world class t5 the only car I know of that came with it is the svo and fun fact it's a 4 cylinder everything else came stock with a regular t5
@GearlessChris10 ай бұрын
A Datsun would be cool.
@jesseduke6943 жыл бұрын
Bad move cutting the side wall of them tires. Were they a set of 4? Even if not they were a set of 2. Not sure about in California but were im at that was a usable tire for a few miles anyway. I have brand new set of mud tires for my truck I use only to go to the mud runs. The other 11 months of the yr I buy cheap used tires like those & there good enuf to burn up showing off by smoking your tires for your buddys or flying up & down the gravel roads all over the county just out being a terror. Its alot cheaper than buying new mud tires every yr. You could have cut the valve stem.
@maxpain19473 жыл бұрын
When you were in home boys garage, i thought you were still in the junk yard.
@ericdolan21303 жыл бұрын
23:51: Not busting balls, but those welds are NOT good(I'm an AWS Certified Welder and Welding Inspector). Way too much porosity and undercut. With that, usually comes lack of penetration. When you re-do the brackets, keep a couple of things in mind. If you are using flux core, you drag the wire (You slag, you drag), like stick. If you are using bare wire with a gas, push the wire. Pony up for some name brand wire (Lincoln L56 is my personal favorite). Believe me, it makes a huge difference. Make sure you have ALL of the crap off there. Don't buy the crap that you can "Burn it out", you can't. It just ends up in the weld sub-surface. Heat should be set for the tubing thickness of the axle. Wash it into the bracket if it is a bit hot for the thinner material. I've been following for a while, and I'd hate like hell to see all that hard work come to an abrupt end because one of the brackets tore off the axle housing during a spirited burnout or hard shift!
@Thecraig9093 жыл бұрын
It was welded with inner shield from a welding rig and not by me because it was super last minute. I’m aware of the porosity and it will be clean the next time around.
@huevigarage3 жыл бұрын
Datsun with a vh45 Infiniti engine and a z32 trans. Sounds like a fun car. Or a inline 6 turbo. Get one
3 жыл бұрын
17:03 Hope you can buy and save that Datsun 280Z.
@backyardmechanicrestoratio69583 жыл бұрын
Buy the studebaker that thing would make a clean rat rod
@talesofanasphaltjockey3 жыл бұрын
240/260 Z's are da bomb ... DO IT !!!!
@jesusfilberto33443 жыл бұрын
for How much will a standard transmission cost for a Camaro 8 cyl. Like the blue Camaro
@mromatic172 жыл бұрын
@thecraig909 were your front I beam axles bent? Is that whay you had to heat it up with a torch and bend it with a jack?
@LKRS1113 жыл бұрын
Thermoquad is a Mopar carb & Quadrajet is Gm .
@alecfromminnenowhere20893 жыл бұрын
Is the roof rust caused by vehicles in close proximity to the ocean and the saline moisture? I've seen that in Florida, but Florida has a lot more humidity.
@jth1987leb3 жыл бұрын
Dick move slicing the tires. How do you know what someone may or may not use. And that’s damaging the junkyards goods. Then you’re super careful taking off the build plate.
@gymbob793 жыл бұрын
I don’t feel alone anymore!! My Dana 60 is 16 spline too 👎🏻 ‘76 f250
@sirkdopsah1081 Жыл бұрын
Datsun❤ Keep and build the 6
@timothyperreault33303 жыл бұрын
Maybe you could have him bend your front axle to correct the camber
@theroaringbigblockchannel12943 жыл бұрын
Why would you stab those tires I love those tires
@dk8320023 жыл бұрын
My buddy is building a fiero with an awd wrx sti drivetrain
@michaelclark49823 жыл бұрын
The grill is out of a 66 to 67 dodge pickup its called a pie plate.
@darrellroeters49513 жыл бұрын
Eye blinker
@gasratzcustoms3 жыл бұрын
Good times!!!!
@Greatday683 жыл бұрын
that's not the VIN tag. it's the warranty tag/
@williamsanders4683 жыл бұрын
Those beams are huge. That’s what she said
@keepitsolidkeepitreal28773 жыл бұрын
Thecraig909 Hey I’m in Cali BayArea visit Pick N Pull which one do you guys go to what state what county being looking for Ford Bronco’s Ford Mustangs
@leewinter62673 жыл бұрын
The headers, Those are part of the Banks Powersport system!!
@wolfeyford84493 жыл бұрын
Haven't seen you do a burnout yet this year guys
@jeremyrios4333 жыл бұрын
Dude what's up with the holes in those welds? Try running less stick out on the wire like 3/16 😁
@ryanhallahan28173 жыл бұрын
The grille is an early 60s dodge d100
@joshuahartford93293 жыл бұрын
The grille was from a dodge sweptline pickup
@redrooster70163 жыл бұрын
How much was the t5 from the junkyard??
@communismman14713 жыл бұрын
Are the tail lights on that studebaker horizontal or vertical
@mathewdostal21803 жыл бұрын
Bro I have a 1970 f250 bump side and I need to add taller springs and bend my I beams. Could you hook up a Ford Brother up with the measurements for the jig you built? I’m not in California Desert racing or anything just trying to get my old shitbox taller so I can bomb it through the woods here
@j-port88183 жыл бұрын
Hope you grabbed the drain plug for that t5. It was literally laying on the ground next to it.
@Thecraig9093 жыл бұрын
I did
@keithjanikula49143 жыл бұрын
Isn't there a difference between gas and diesel turbos? I didn't think they were interchangeable.
@lucusc40023 жыл бұрын
I wish junkyards were like this in Canada or at least in my area we do not have the abundance of parts and cars you guys have.
@timedwards82253 жыл бұрын
I like that body style of the Datsun
@edcar87133 жыл бұрын
I took a shot everything you said world class, I just woke up after 24 hours. (TRUE STORY) My buddy text me and challenged me and I died! I drank a whole bottle of jack Daniel's in 30 minutes
@JT-il3fe3 жыл бұрын
Dude loved the video but if you say the floor one more time when talking about the ground I’m going to pull my hair out 😂 there’s no floor in a junkyard🤯
@harrisonhunter75123 жыл бұрын
Great video mate, Datsun 280zx would be a cool car for a project .
@devonnile79783 жыл бұрын
i have a 70 f100 and i need new grill inserts and all i can find is 69s and 71-72s
@foxbodiesforever92343 жыл бұрын
The dimple bearing cup your talking about will have the word Timken on it that will tell you it is a world class
@PlymouthOwner3 жыл бұрын
What about the crown vic at 23:04!?!?
@shawnburton68393 жыл бұрын
What junk yard is that. Need that grill
@scottm-nc94513 жыл бұрын
Not sure how I came to this video but glad I did... 😊 new sub 😊 In yard 1 was a teal green Ford escort 92 - 99. ... how can I contact this yard I have my mom's 95 Mercury Tracer ( escort same thing) ..looking for hard to find parts. ...
@theatcman373 жыл бұрын
U should get a 280z or something there really cool
@mv31293 жыл бұрын
Would be nice if you tell your subscribers which wrecking yards you guys go to.
@jerryduffel30173 жыл бұрын
That was a Dodge grill in the back of that Ford pickup
@whatchu_talkin_john_willis3 жыл бұрын
supposedly the t5 from the new edge v6 cars is the strongest of the factory t5's
@quentonsmith60853 жыл бұрын
Auto?
@WhyBeNick3 жыл бұрын
Yep, easily the best way to find good WC T5s in my area. Foxes are all beyond stripped, but the NE v6s are generally intact.
@dno57793 жыл бұрын
JonathanW has a video on those 5 speeds.
@OtisENGINEuity3 жыл бұрын
As someone that had a 95 Bronco for 6 years I can tell you the TTB split Dana 44 is shit on the street. It may be great at high speed out in the desert with upgraded components, but stock it SUCKS! They follow every little grove in the highway, they bump steer like crazy, they try to turn on their own when you let off the gas.. I will say though it is hilarious to turn off O/D and floor it and watch the hood lift like 2 feet and then drop when you let off just because the weight transfer unloads the front suspension and lets it droop.
@brianadams4292 жыл бұрын
My 94 Bronco when i bought it from a friend, at intersections where pavement changed highth at the curb would wander if you didn't put in counter steer. Well i replaced the smoked draglinks/tie rods. The worn out worm gear in the steering box was the major part of that issue. When replaced the steering box, no more wacky slack. Old box i could move the steering wheel from close to 10 to 2 with no tire movement.
@ajm13903 жыл бұрын
The grill is off of a 55 dodge truck
@DawsonDodgeW1503 жыл бұрын
Bro I would really like those door off that 79 dodge but I live in Georgia
@dawaynetrobaugh35782 жыл бұрын
Studabaker is no longer for sale.
@dakotaman40853 жыл бұрын
SoCal....most cars nowadays are SMOG forced junk....