Driving My NASCAR Inspired F100 to LAS VEGAS! Will it Survive?

CHECK OUT HEATSHIELD PRODUCTS HERE!
www.heatshieldproducts.com/
-
GRAB YOUR F100 MERCH HERE!
SHOP NOW: www.nineoninespeedcompany.com
-
FOLLOW ME ON INSTAGRAM!
@thecraig909
@carrnagge
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
Check out these Classic Uploads!
-Open Headers High School's Reaction!
• Open Headers High Scho...
-Pulling A Rare Jeep From The Weeds!
• Pulling A Rare Jeep Fr...
-My F100 NASCAR Conversion Is FINISHED!
• My F100 NASCAR Convers...
-My F100 SHUTS DOWN AN IMPORT MEET!!! CRAZY FIRE
• My F100 SHUTS DOWN AN ...
-We Found a RARE SVT SUPERCHARGER In The JUNKYARD! Best Junkyard Find Yet!
• We Found a RARE SVT SU...

[@bdtaylor1979]

Next tutorial should be how to install a decal without there being 100 air bubbles 😂

[@Fahrenheit_Motorsports]

Quickly becoming one of my favorite automotive channels. 👍🏽👍🏽

[@alani2071]

This was a really fun video to ride along with. As an old gearhead, this is really cool!

[@pinstripingbybear.]

@6:42 dude from years of experience with header gaskets PROBLEMS buy two sets of Mr Gaskets collector gaskets, put two on each side and run Orange RVT on front and back side and the middle of the gaskets and clamp them in... I went 3 years on that setup on long tub headers on a small block Chevy running 600+ HP... If it's the heads leaking run the Orange RVT ON BOTH SIDES!!! it works man

[@bobmanzi7712]

Great stuff thanks. Merry Christmas. Happy New Year from me and mine to you and yours.

[@GrandPitoVic]

Brother, that truck sounds so friggin good. I love that truck. Cheers brother. That is one bad azz build

[@gregh6794]

What an awesome trip . Thanks for sharing , love it :)

[@jcnpresser]

My car has 3 bolt long tube header collectors and the collector someone has made at an exhaust shop, but it is a straight piece with a bubble in it, so it slips into the header, and the 3 bolt flange squeezes up to the header with no gasket. The bolts come loose sometimes, but it still doesn’t leak. It’s freaking awesome. Like there was only 2 bolts there when I first got the car and it wasn’t leaking. I think the pipe going into the headers collector needs to fit kinda tight.

[@jackperry9369]

The truck build is badass Love the content would love to go on a drag and drive type of event thanks for the content

[@SpyroRoar]

Gotta love all those Chevys 😍

[@austincooper566]

Keep killing Craig! Been watching for years. Congrats on almost 200,000 sbs buddy

[@chevelle19721]

My brown 67 chevelle @8:39 😆 did some donuts in the dirt at the tank/64 statue after check in lol

[@RichMartinIuhhuthy]

Great to hear you finished your degree. Keep doing what you are doing with vehicle.

[@edcadlick2650]

Craig have a Merry Christmas, all the best in 24.☃️👍🇨🇦

[@snipesjackson630]

Super cool video.

[@campervanbug7658]

Merry Christmas creg

[@JW-ot5zq]

Man this was dope. When the Black Widow guys pulled up that shit looked cool

[@conmancollins1176]

Awesome vid

[@bretmadsen8483]

That was my red 68 camaro when you mentioned nice cars getting driven with brake dust…ha, it’s my hooptie and have over 40k miles since I bought it in 2014. Definitely not babied and been on multiple other power tours. Like you said, route was nothing crazy but still fun event

[@alanbustamante21]

Yeeeeeeeecraaaaig🔥🔥🔥

[@normanrsaldana4371]

Noticed you foxbody on Hagerty evolution of the mustang platform. Merry Christmas to ya guy's.

[@josephbeebe6873]

Bad ass video

[@Viktorrhansen]

Awesome trip even tho we didnt make it on time any days hehe!

[@gugaemarga8052]

Saudaçoes do brasil meu amigo tenho uma f100 86 tambem estou restaurando

[@Maximusfoisey]

Are you going to be at power tour this year with solmen

[@Jsmith9619]

Cool application of the sponsors sticker....Im sure they will be proud.

[@javierflores6312]

He should race toms refurb mustang

[@chevroletbelair1]

Heatshieldproducts really work and it affordable. I have sparkplugboots from them that are touching the headers and they have only a discolor on this place but isn't burned thru

[@devin4369]

Almost at 200K

[@acemancj7164]

2 years ago today I bought my 71 f100 after getting hooked on Craig’s videos

[@just4giggles-ex5ne]

💥WOW💥 you actually filmed some Chevys, glad everything is rad or super rad.

[@ltsgarage7898]

What is done to you motor. Like heads, compression, cam? I love the sound of it.

[@Samthemule2003]

Skeet skeet YYYYEEEEEETT

[@glenryan6569]

Was a little nervous when the 55 Chevy LS passed you I thought you were going to try to keep up that would have ended badly for the little Ford.

[@kgray59]

Time for some vbands on those headers now lol

[@kmnremtp]

Was that an s10 blazer behind you in the intro?!

[@rafaelvazquez7465]

Congrats on the degree. Spend some serious time in the engineering departments of the companies that support you so you can see differences from school to real life and keep stretching that engineering muscle even of you don’t do it for a living.

[@2koolchris291]

I am very happy because I found a 5.0 high output motor from a 91 Lincoln mark seven that I am going to use in my 73 mercury cougar XR seven project for 300 bucks

[@jeffcomer8317]

Congratulations on the degree

[@Backwoods_870]

GOOD TO SEE THE TRUCK GETTING TO STRETCH IT'S LEGS...

[@ltsgarage7898]

Do you still have the Twin i Beam in the front end??? I need to get my rear end lowered. I’ve installed 95 Jaguar front suspension. I have a basic 4 link set up. For the rear end. I need to narrow the housing so I can get 10 inch wide wheels under the rear end…

[@almost-heaven]

Where did you get your head liner from

[@Upstages]

At 20:00, is the lighting making the wheels look like they’re wobbling?

[@Jsmith9619]

Whats up with constant weird upshift rev matching? Not needed.

[@MarkoLaurentOnline]

Shaweeeetttt

[@jimmy9186]

more vids on the foxbody!!!

[@kevinhawley962]

have u guys melted any plug wires on those trucks?

[@justinfahnestock5067]

Merry Christmas. But I wanted to say Franklin's truck needs more power.

[@gibhamracing37]

Would love to know what ole boy did you end up in the cuffs 😂

[@nono-oz4gv]

god damn it now i wanna play fh5 lol

[@robertmercer5759]

I'll take the red maverick on the trailer,

[@hunterpruitt9310]

is it possible if you could let us know where you got your steering wheel

[@domenicmuscolo]

Did this truck ever hit the dyno? I want to see it

[@captainschannel9331]

👍😎

[@Sneaky_n55]

So your the truck that raced me lol 😅

[@PrincessTS01]

did you at least drive on the F1 road?

[@BadDrugsRGud]

Even if the video was 1hour long id still watch it

[@conmancollins1176]

Move to FL

[@ryanmcclendon3309]

Tach? Most of your views come from people who rely on you not using your tach.💥💨🔥😅

[@leonrdopercivalli6164]

What is the name of the song of the minute? 0:18 0:24

[@TylerDuysen]

"imagine putting 65 bucks in your tank every 4 hrs" also craig in his 500hp small block carburated truck revving it every 5 sec and letting off etc lol yalls gas prices is wack but so is your state and its leaders so your driving is the reason for using 65 bucks every 4 hrs loved the video merry christmas craig

[@2nickles647]

More like $10🎉0.00 every 200 miles. My daughter big 3/4 ton 8.1 liter drinks gas like a tanker

[@TylerDuysen]

@@2nickles647 my 5.2lefi gets 26mpg on a great day 23.4mpg average even with a damn stupid 4 speed upgrading to a zf5 or zf6 soon hopefully

[@jonathanabeld2326]

The thumbnail picture completely sums up owning a bumbside f100 nothing lines up even when you completely try too

[@diesel42099]

Where is the bull nose ford at

[@rustysnook7467]

When you're on power tour you're supposed to stop and help people that's part of the

[@Oldobsfordsusa94]

You can thank your governor for that all the taxes and regulations and so called import emissions taxes. Have a homeless person pump your gas that's up too in California. But good video 😊

[@speedyg2577]

The stance of your truck reminds me of a baby walking around with a full droopy diaper. I think it is the rear tire being so far up in the fender. But the fender arches look different front to back. IDK just looks like the rear could be raised an inch or two to look right. But that's just me liking a little rake, whether it's done by taller tires in the rear or the rear of the truck being higher in the rear and not just level.

[@Ezekiellife]

In Ohio every four hours I have to put $60 in gas in my truck

[@Oldobsfordsusa94]

You got a screwed up governor 2

[@Oldobsfordsusa94]

274$ a gallon in Florida today

[@Oldobsfordsusa94]

Who's Florida's governor?

[@acerobinson2066]

Most of the fuel prices in Wyoming are $2.22

[@Cowboys-garage]

We got 3.50 in ny

[@glenryan6569]

Filled up in Toronto today 1.46 a litre. 4.5 litres per gallon so about 7.25 Canadian dollars per gallon. So its 5.46 American dollars per gallon, you got it made.

[@Oldobsfordsusa94]

274$ in Florida today. Last week 253$

[@Oldobsfordsusa94]

​@glenryan6569 thank Justin Trudeau for that. That's what happens when you have a French Canadian running the country

[@salledrab283]

@@glenryan6569 there is 3.78 liters in 1 gallon

[@bryanunion5110]

Might be the minority here because i love black widows. I don’t think the sound fits the truck it’s too corvette sounding. I think their venom series would fit much better. But awesome build otherwise 👍🏾👍🏾

[@gearhead6493]

I dig your videos . I can’t wait until the 64 comes back. You should stop reving your truck like a 10th grader though. 🤣🤮

[@racer193wr]

Beside your all from California im not sure how any motorhead or car guy can even stand living there.. kinda like Canada where im from im having a hard time remembering why i stilll want to live here..

[@user-uy4yn5nc7y]

That black Chevelle is what dreams are made of 🥲

[@donaldwilliams2270]

400M WILL RUN FOR 70,000 MILES WITH LOW OIL PRESSURE !!!