Hyundai i30 Start to Finish Head Unit Installation

[@bodebank8545]

Amazing! I used this video to fit my head unit and restore the factory USB-AUX module. Everything worked fine and I feel like a professional now because of you. Thanks

[@Seedyrom247]

Fantastic job! Really helps me for my son’s car for a stereo and dash cam install. I wasn’t sure how it all hung together as I’ve never seen so few screws holding the trim together. It really is just a bunch of plastic clipped together. I should have pulled harder … except for that A-pillar long-nose plier trick. That was a blessing. Appreciate the close up of what is going on there. Cheers.

[@simonsundo3338]

Hi mate. Where can I find the video you said of the wires process/setup Cheers

[@jacobjackson7992]

Easy guide to follow.. thanks! Have you got a link to the USB retention cable?

[@bendavis8700]

Can i get a parts list? radio, wire harness, back up camera. I have a 2015 Hyundai Elantra G2 head unit looks exactly like the one you put in. I did this same conversion for my other car - nissan and found a great video on youtube that gave a full parts list. I purchased all of it and installed no problem.

[@verbatim1144]

Great video. One of the best and most thorough I've seen

[@maxbearass2178]

Hi, if the i30 already has an existing reverse camera will it plug into the after market pioneer unit as I’m going with the same unit and all?

[@fioufiou971]

I have the same question. Do you try to change tour head unite?

[@davidgeorgecheu4615]

Do you have one with a reverse camera installation as well? Thanks Mate!

[@robbiexiong3508]

Im looking to replace my 2016 Elantra gt radio for android. Where do i grab the steering wheel control harness?

[@NeilJones-q1b]

Just ordered head unit and fitting kit, is it plug and play or will I have to solder wires??

[@jrmilt]

Thanks for the steering control setup @11:14 was driving me mad trying to get controls to work

[@xJI00]

Nice video. I coincidentally did my camera today, same way. All those videos by DIYers running the cable under the airbag and other DIYers blindly following is cringeworthy. Good until you have an accident. What is the maximum head unit screen size you can run with that facia ?

[@myriamannxx]

Oh my goooodness! I have just completely f#%^ my factory radio. My son put coins in where the CDs go & silly me tried using a knife to get them out. Which then resulted in the radio shutting off 😭 this video helped A LOT! Can I be a pain and ask if installing a new head unit interfere with the sound system? Thanks!

[@TheFittingBay]

Lisa Pritchard Hello! Sorry to hear about the factory radio. Do you mean sound system as in aftermarket components or just the genuine system?

[@sergioclemente9]

Is there any way to install a digital cluster on the i30 ?

[@matthewastley8655]

Hi Can I have the instructions for using a interface for steering wheel controls thanks My head unit is a Blaupunkt car multimedia Dakota BP800

[@Dubs2]

Are you running a cable to the back of the car for the camera because it didn't have one and now does? My 2015 i30 does have a camera so I'm assuming i just need to connect the cable that is already there.

[@TheFittingBay]

Will need a reverse camera retention part :)

[@Dubs2]

@@TheFittingBay great, thanks mate

[@rileywillis6072]

Great video thanks mate, just a quick question, do you disconnect the battery before you start any of this?

[@TheFittingBay]

You can, but do not need to.

[@rileywillis6072]

@@TheFittingBay thanks mate, did it today with great success. Thanks for the video, incredibly helpful

[@StephanieMcCabe87]

Hi there I have a reverse camera in my 2015 i30 and the new head unit isn’t showing any video connection when I reverse, any tips??

[@jessecopley6991]

Hey Mate. Great video. Can you retain reversing camera that’s already in the Hyandai?

[@xJI00]

Whatever head unit you choose must support the existing camera.

[@batresluis]

DO YOU HAVA A VIDEO ABOUT INSTALLATION OF AUTO LIGHT CONTROL SENSOR FOR HYUNAI I30 2016?

[@AccessoriesZone]

hey mate , i just came to watch video because of thumbnail / it was showing new i30

[@TheFittingBay]

Oops

[@marilouancheta9847]

How much to change including unit?

[@123kfk123]

Hi, could you tell me where I can find a radio frame like the one you use in this video?

[@dhigas5528]

the website doesn’t alow to order, it says “find a store” but i live in the US

[@imswic]

Video of reverse camera install??

[@leaffan89]

First timer here but can you link to the video to setup the loom? thank you

[@TheFittingBay]

Hi mate! To hard wire the loom?

[@LazyKatze]

@@TheFittingBay is this needed because the loom was not plug and play or is it always needed? Might be the term "hard wire" that is confusing me.

[@rogervandenboogaard7160]

Hi there. I have a 2015 i30 gd2 SR. (with sat nav but no apple CarPlay). Will this unit work with the inbuilt reverse camera?

[@TheFittingBay]

Sure will with a retention harness

[@asnail100]

Hey mate, just wondering with the antenna connection how come you didn't need to use the antenna adapter? Planning on doing a future install of the Pioneer DMH Z5350BT into my i30 in the next month or so. Cheers!

[@TheFittingBay]

Sunil Sebastian Hey mate! Just because this car did not have a vehicle specific antenna plug. It just had the universal plug which will plug directly into all units. The power antenna wire on the harness should still be connected however! When the adapter is listed I recommend getting it, even though this particular car did not need it doesn’t necessarily mean all i30s will be that way :)

[@asnail100]

@@TheFittingBayAwesome thanks very much for this, the aerpro site lists two adaptors, should I get both to make sure I'm covered depending on the connection I have? Also in terms of the power antenna wire, I'm getting the aerpro APP9PIO8 (when I type in my car details) which I think doesn't require any soldering, so it's just a matter of plugging into the Hyundai side and then into the headunit? Thanks so much :)

[@TheFittingBay]

@@asnail100 Yep that is right! All plug and play with this setup :). APA47 should be the correct one. The APA64 is for a different purpose :)

[@declancrab6091]

@@TheFittingBay pool

[@albandhamo]

Hi. Pls i need some help.I have an i30 year 2012. I have tried to change the language from Korean to English but it seems that on the steering while screen there is not an option for changing the language even in the board screen. Is there anything what i can do about that how to change it? Thanks in advance.

[@rhiiiixo]

Great video. Super informative - thank you!!

[@stevea3923]

Good video, very thorough. I've got a Z6350bt to install. Can you use the original reverse camera with this radio as I've read the car radio needs to be the Nav model which mine isn't?

[@LazyKatze]

How would one know which size head unit will fit the facia frame? (for hyundai I30 2016 GD)

[@np061]

Hey Mate ..just a query If you buy iso harness adapter..then do you still need to solder the wire or the harness will do?? Thanks

[@TheFittingBay]

James Paudel If you buy step 1 and 2 you do not need to solder :)

[@np061]

@@TheFittingBay thanks mate

[@mibberz1]

can you install any 2din setup in this?

[@ArmanKhan-dv5jc]

Hey bro I have Hyundai i30 2015 but I can’t connect Bluetooth it says ( Bluetooth not ready please wait ) any idea?

[@TheFittingBay]

Hmm try to delete al devices on factory system then try again

[@LazyKatze]

Great video, one of the most thorough and clear one I have seen. Do you know if there are Android auto infotainment system that goes on top of the dashboard, I guess replacing the original dashboard top. I would love to upgrade my i30 but I feel like having the screen in center panel is to low I would rather have it further up so that I don't need to take my eyes off the road when following the navigation and just need to a glance at it

[@missgracie91]

Hey! thanks heaps for the vid, I'm getting more confident with the idea of attempting this - I'm keen on the PIONEER dmh‑z6350bt I'm looking at the USB retention - aerpro has given me two options - the one closest to what looks like you used (APHYUSB4) but it has one black and one red wire - where am I supposed to plug these in to? the other option is the APHYUSB6 which looks more plug and play - but would I lose AUX function with that?

[@TheFittingBay]

Hey man. If your USB port is the same as the video you’ll need the APHYUSB4. However it’s been revised now and is 100% plug and play :) worst case you get the old model upon ordering and they’re just illumination and ground

[@missgracie91]

@@TheFittingBay thanks mate! ill try my luck!

[@neilpretorius191]

How much for that complete system

[@brianclarke3574]

Hi is there a link for the stereo

[@BaysickM8]

Hey, do I have to ground my pioneer 5350? VZ commodore. I have the aerpro kit.

[@TheFittingBay]

BaysickM8 black wire should go to ground yes and park brake wire can also go to ground if you want to

[@BaysickM8]

@@TheFittingBay do you know where abouts to ground it as most of the interior is plastic and hard to fine a bolt connected to the chassis

[@TheFittingBay]

BaysickM8 you’ll have to extend it drivers side or passenger side and find a bolt

[@missgracie91]

Hey! So I've got step 1 and step 2 from aerpro connecting my hyundai i30 to a pioneer DMH-Z6350BT. Still a bit confused with park brake and vss. Both looms have the park brake and vss wires free (with connectors) but i can follow the step 1 side to the swc module. On the patch lead side of the swc module there's extra ground wires... does this mean I can connect the green-green and pink-pink between both harnesses and it will bypass/ground them?

[@TheFittingBay]

VSS wire can be connected to the pink output from module. Park brake wire just ground it other wise your life will be a living hell trying to use CarPlay without being stopped

[@richardharrod]

@@TheFittingBay I had exactly the same question. Thanks for the great vid. What would you suggest grounding this wire to? I have the aerpro looms on both sides and hoping to not have to solder anything!

[@vx255]

Hey mate, awesome video that'll certainly help me next week when I attempt a Pioneer 5350 install on the same type of car. Quick question, I'm using all the aerpro bits, I have ordered the video retention harness, was the integration with the factory reverse camera plug n play?

[@TheFittingBay]

It is! But not on this car as we added an aftermarket camera :)

[@LazyKatze]

@@TheFittingBay what after market camera would you recommend, seems like jungle? Also that video for the installation of the camera would be nice 😊 cheers

[@Healingwith.hollyy]

heya! great video - thanks! I have this exact model car, what size radio is needed to fit? is it 7 inch? :)

[@xJI00]

6.8 seems to be the standard. If you have a factory satnav the after market 6.8 will be slightly smaller as the factory satnav is quite large.

[@Healingwith.hollyy]

@@xJI00 thank you!!

[@MrTerryTurtle]

hi mate if i get one installed will it affect my new car warratty

[@TheFittingBay]

MrTerryTurtle Hi mate! Definitely not 😊

[@batresluis]

How about ir my i30 has a mic already?

[@TheFittingBay]

Not used when replacing the system :)

[@smartwaynovix]

Awesome work mate. 100% you saved me breaking something when popping the trim. I do have a query: Have you ever installed the Sonly AX-5000 in a Hyundai i30 2014? I'm getting odd behaviour with the steering wheel controls. They sometimes detect as a different button. Might work for 30min then start to play up. I have replaced the CHHY9C module and now the head unit. I also just switched Dip Switch 4 to off on the steering wheel control. Just wondering if you have done any installs and hit the same problems? Not sure of this is a compatibility issue.

[@TheFittingBay]

Hey mate! Thank you. Try going into settings > steering wheel control > custom and then set them individually. You might also need to try this process with other dip switch settings. I’ve seen it before and this is the solution As the unit will now hold memory for swc learning

[@smartwaynovix]

@@TheFittingBay Thanks for the quick reply. I should have mentioned that I used the custom setting for steering wheel controls on the head unit. I had two scenarios when programming the controls: 2 buttons were detected as the same when attempting to program OR they would all program to the respective buttons with no buttons detecting as the same, then part way in the trip some buttons would change to other functions. I will see how it goes with the dip switch changed as per Aerpro recommendations for newer Sony Radios. Aerpro didn't have detailed specs on each dip switch. I only found that they had Dips when reading details on the patch lead APSONYPL. Thought they might put that info on the CHHY9C. Thanks again and keep up the good work.

[@awsumjames93]

Hey can you give me the details for the USB cable and which harness you used to keep steering wheel controls

[@TheFittingBay]

James North Hi mate just jump on www.aerpro.com and put the vehicle details in (drop down menu) and all the parts will be there.

[@avishubhee6293]

Hi, I live in in Ireland i was looking to order a head unit but I cannot find it would you be able to direct me where i can buy it, thanks.

[@TheFittingBay]

The pioneer unit?

[@brettpeek65]

Mate fantastic video. Thank you. Just installed the Pioneer 5350 into the wife’s i30. All went well using aerpro harness except for the one video retention. All wired correctly I believe, image appears when engaging reverse, BUT as soon as the car moves backwards the image goes black. When I stop the image appears again. Any suggestions would be very helpful Cheers

[@brandonstephens2809]

Sick content 🙌🏾

[@mewc4463]

Best video, great job

[@IanRBryce]

What is a head unit??

[@AccessoriesZone]

where you located?

[@TheFittingBay]

Accessories Zone Melbourne, Victoria.

[@maverickmace9100]

I wish mine was a manual.

[@Blaeven]

You're showing the wrong i30 in your thumbnail... I came here looking for a guide for a 2018 model

[@majorshaker]

Please change the thumbnail. The car in the picture is newet model than the one in the video

[@heribor6245]

Why you are sooo cute?

[@Ghotra121]

Clickbait for new i30

[@tomilipin]

Thumbs down for the misleading thumbnail :(