Grand power Stribog SP9A3S. Wats new?

[@christopheryap8542]

Solid review brother. I just bought the SP9A3s and I've watched a ton of video reviews on this platform but none of them was as good as your's was at addressing my concerns regarding reliability and also my curiousity between shooter perceived differences with the Stribog SP9A1 vs SP9A3s. Keep up the good work and thank you for this awesome content!

[@URBNGRWR]

I’m seriously considering getting one of these. How do you feel about this piece a few months later?

[@RenegadeNate]

Got mine, took it to the range and tested it like you did. I had some weak ejections with 115-grain but not with 124-grain. However, I just installed the HB Industries short stroke buffer (and other HB parts), so we'll see if that fixes it. I love it!!

[@amandasturino8194]

And I wonder if the issue your having when shooting prone is due to the mag pushing against the ejector-the mag rests against it. It’s on the side held in with the two small screws. When mine was loose I had a lrbho activation with rounds in the mag running an A3 tactical lower. Once I tightened and blue loctited the screws zero issues FYI hope it helps.

[@31Nigel]

Really superb video: great quality, great information. Way to test it as no one else has so far! THANK YOU for taking the time and care. And you had it right with "STREE-bog," which is the Slovakian pronunciation . Ultimately, we can pronounce it however we like--I choose the Slovakian "ee" sound. My SP9A3S has about 300 rounds through it with only 1 easy-to-clear malfunction so far, and that happened when someone else was shooting it, so I don't know if it just didn't like them or what (haha); could just be the break-in period. I've used the curved 30-rounders and the straight 20-rounders, by the way. Other than that one, this is one super-smooth, super-fun, super-accurate, and SUPER-compact gun, and just a joy to hold. Everything I'd hoped for and more. Popped a red dot on and I'm off to the races.

[@OwnerOfOwn]

Production quality is great man, worth the 20 hours.

[@RenegadeNate]

My SP9A3S arrives Thursday! I already have the SP9A1 and love it. It has run flawlessly with straight mags and suppressed. But I wanted the smaller version.

[@anesnurkic1469]

Where did you order from? I have one comin in aswell the wait is killin me

[@RenegadeNate]

@@anesnurkic1469 Modern M Defense out of Texas online. At the time, they had the best price ($1,150 with collapsible PDW brace). DK Firearms also had ot for under $1,200 with free shipping.

[@loganconnors2388]

I can not find one of these in stock anywhere!

[@billytube325]

@@loganconnors2388 Atlantic firearms

[@theeoarsman921]

@@loganconnors2388 Still looking?

[@SquirrelsLiveMusic]

HBI makes a bigger bolt release for the OG lower.

[@RenegadeNate]

And it's definitely one of the best upgrades you can make!

[@joeflowers9084]

Scrolled to comments to tell him this.

[@leonelcarbonero1853]

In january I bought my 223 Rem 7.5 inch Brigade firearms Ar15 and in 20 April my 9mm Striborg sp9a3s

[@rickalexander2801]

Very informative regarding your prone test. Good review.

[@monkeycbrown]

Interesting, I'll check out the prone issue on my spa3. I have both straight and curved mags.

[@kaig453]

I can’t fault a gun for having hiccups when the magazine is being rested on the ground. I would prefer to have no issues regardless, but I’ve always been taught that resting magazines on the ground or bench when shooting can induce issues.

[@Mitsurugi2424]

You can, and people should. Modern tactical firearms should not have this issue, especially at that price point. Similar firearms that cost as much or less do not have this issue.

[@Blindside337]

Excellent observation no one else has pointed out. Everyone who hates on the Bog seems to be involved with B&T or HK/affilates...ironic I guess. Hah. Also that they didn't catch the ejection angle, mag movement or scarring and do the math. I will note that ETS Scorpion mag used here are the most notorious for loose tolerances that I have found in my AR9 New frontier Armory lower builds. Also the most fragile if dropped. Their high cap clear mags look so good but the A3 Tactical/Lingle lowers as well as my S9 AR lowers were designed off of the original scorpion mags and the ets fits loose with some wobble. A solution if you want to see how capable a Bog is before getting a Scorpion lower or invested in non OE Scorpion mags or modding I did mark the base of the mag well on both, ran a couple layers of gorilla tape maybe 1/16 of an inch higher than the mark "the ETS clear which gave problems & a couple bog curved mags which have never given issue but as with yours would slide up under pressure causing friction...so the tape gives a little resistance thus giving me a tight fitting mag & eliminating the possibility of over reach & has a little elasticity that helps a mag firmly click in and click out via mag release push. I would have modified the ets with a soldering gun to it's locking points but the plastic is so prone to cracks that this method actually made me feel better in the event I dropped it etc. Ive had cracks to ETS on the bottom after dropping a full mag "had repaired by plastic welding with a soldering iron and then was using the Gorilla tape on the bases for protection when I used the above method and also had to plastic weld one that had overreached causing marring/a crack down from the feed lip when it was caught by my AR9 BCG while running a heavy spring/buffer vs my hydraulic setup. Just noting a workaround & a few things that could inspire others or help if ever stuck in a situation needing to field repair, a heated knife could even be used to repair plastic damage in the field perhaps by using some shavings off of the same part to essentially solder a crack/chip or marring problem & lots of new mags are made from plastic, some using better quality than others....but using oem CZ mags is the solution for this problem in any Scorpion lower from what I have seen. On the original Scorp I believe they locked up a bit better and by being looser on the sides allowed for faster mag swaps but other adaptations have proven to give problems.

[@r.j.macready5620]

Very good video. Thanks for helping me decide.

[@TexasShotz]

HB industries has a good bolt release for it the lips are significantly longer and wider ... MUCH easier to actuate.. only like $50 bucks ... just so you know.. they got a great charging handle as well folds outta the way ... anyway there's my PSA for the day...

[@rosshall8067]

I really enjoyed this video. It was fun to watch all the way through :)

[@streamylc]

Dope video man.... and what an interesting "quirk" to come across... props

[@defteo4370]

Really good video! Thanks!

[@eagleyedye2070]

HBI makes the extended bolt release

[@eddy870]

Nice video. Do more bro! Do a live once in a while with a superchat too.

[@TheRitualChannel]

great video, thank you for sharing that information

[@arturb5152]

i like the honest review 🙂 thumbs up 😁

[@fpav4049]

My A3s had 2 casings fall into the trigger out of 60 rounds fired. I will put the Buffer from HBI which should take care of that problem,,, I hope.

[@AllTheDips]

Did it help?

[@escotavo5049]

Dope vid looking into the s bog

[@USMC4Life23502]

I gotta say this, if I have to go into a prone position while utilizing a firearm of this nomenclature " sub gun," then something has drastically gone wrong, with the mission. a firearm like this is typically used while assalting and / or in a CQB environment. In any case, I have never in my time in service found myself in such a predicament. This is a non issue as far as I am concerned. I get it, you create content. I suggest using the proper tool for the situation you intend to work in. If that includes going prone, then I would suggest something with a bipod. Where your not inducing malfunctions. No one that I know of are using an MP5, MAC10, UZI, APC 9K or MCXK in such a manner.

[@agoogleuser2369]

Nice! Subbed!

[@ToddVoght]

I was thinking merkin. 🤣

[@loganconnors2388]

Just curious has anybody else been taught never to rest their gun on the magazine while firing any gun?

[@skipjackdiver4297]

We did so with the M16 prone in basic training. No problems there

[@kristyrodgers9052]

AK guy proceeds to laugh😂

[@10oner]

@@skipjackdiver4297ur drill sergeants failed u. Pog

[@gavinwoolf6574]

What’s that fire grip you got on the A1?

[@amandasturino8194]

Thank you very much for the review. I currently have a SP9A1. Looking at a full size A3 and this one the A3S along with MP5 clones. Never shot either A3 or an MP5. For the money the A3 seems like a bargain. What’s the recoil difference between the A3S and regular A3? Would you buy the A3S again ? Any help is appreciated!

[@RenegadeNate]

Between my SP9A1 and SP9A3, the recoil difference is definitely noticeable. I don't have the regular-size SP9A3 to compare to the S, but I imagine they're pretty much the same. My S was very soft shooting (softer than my CMMG Banshee and on par with my Sig MPX 4.5").

[@amandasturino8194]

How is the range with the shorter barrel?

[@RenegadeNate]

@@amandasturino8194 juat as good! Shot 50 yards no problem.

[@heavyartillery9633]

I wanted the s version but I’m not sure if I Shld go with the 8” don’t want it to feel too small. What’s ur take on the matter

[@alfredzig2035]

11:30 That was a nasty malfunction

[@deadmangreedo]

Hey fam I been following you on IG for a minute now! Great to see you on KZbin. If you have a B&T sub gun could you try the prone position to see if you have those issues as well?

[@5.56hero5]

What hand stop you using on there?

[@theeoarsman921]

Where does the Scorpion lower come from?

[@r.j.macready5620]

Lingle or At3 tactical

[@TheWizzding]

who shoots PCCs prone?

[@PrimaryArmsOptics]

Anyone trying to hit something small further out

[@SuperPRO4LIFE]

Needs more finger hands lol.