All House Framing EXPLAINED...In Just 12 MINUTES! (House Construction/Framing Members)

[@grindordie3336]

People do not understand how much value is here. 12 minutes of great value. Well written and good editing. Thank you.

[@TheHonestCarpenter]

Thank you! 🙏

[@realemonful]

@@TheHonestCarpenter I hope you don't work in construction, at least not without supervision!

[@ronmit-p5g]

i knew everything said in this video by the time i was 8yo ....

[@eleashaeatman]

Yes! This was a great video!

[@will9556]

I'm a construction manager for a large residential builder for almost 30 years. You nailed it!!! I'm going to make this video "homework" to all my clients so they can understand what I am telling them at the pre drywall walkthrough. Well done. Best of all you kept it very easy to understand and under 15 minutes. Any longer you start to lose your audience.

[@carltonbauer2779]

"Homework" is important. Question: do you know if there is a computer-based 'framing simulator' I could practice with, that may even show the load vectors?

[@greyarea805]

Omg that'd be so awesome!

[@ned1915]

This is what most people just want is to be educated on their surroundings.

[@atigerclaw]

"You nailed it!!!" Yes... Framers do that. A lot. 😜

[@artemaung5274]

@@carltonbauer2779 working on it right now. I couldn't find anything like it, wanted to practice, so I figured, it's not that hard to create a simple VR demo where you can assemble walls with plates, studs, headers, etc I can sort of already do it for myself in 3D software just to play around with framing layouts, but it gets too involved for non-technical person so creating a simply easy to use sim is a goal for me.

[@josequintero5532]

You need to be an instructor at a local community college or trade school. Your video is so easy to follow and I know I’ve benefited a lot from watching this 12 minute video. Please keep ‘em coming!

[@poppinthatcootchie6796]

We're both now graduates of KZbin university

[@michaelpontiac7467]

I was thinking the same thing a I watched the video. It is an art to be able to explain something in its most simplest of terms. Well done.

[@g-man5809]

I believe he is where he should be....Teaching us, hopfully getting rewarded from his channels popularity; cracking books is/was a chapter in my life now it's hands on, no time to, pay to park and get graded from a book worm.

[@smpoinde]

Seriously! As a public school teacher, we are wasting young minds and doing damage to our future as good tradespeople are hard to find

[@josefrees]

In my opinion the biggest hurdle for the layman when looking at skilled trades is the jargon or trade words. This video is a good translator for what you know or think to what they a professional is talking about.

[@anabanana5143]

I never usually comment on YT videos but man oh man did you do a fantastic job! You taught me things that my lecturer would've taken 3 hours to explain. Your videos are highly appreciated, thanks man!

[@TheHonestCarpenter]

Thanks for watching, Ana! 🙂

[@anabanana5143]

@@TrueRandomization architecture

[@BjornHansen314]

@Ana Banana 3 hrs would be better

[@underwaterdive1]

I love see the best house make millionaire money work this 👏 free life working guess must muscles 💪

[@kennethhanes5438]

I’m Australian and outside of small terminology differences used this was truely universal explanation only thing that a major difference between australia and America is almost every house uses trusses and concrete tile or colourbond/ metal sheeting so you’d never sheet a roof I’ve seen 1 house with bitumen shingles

[@colinwhitfield8627]

THIS IS LIKE FINDING THE ROSETTA STONE. THANK YOU!!!

[@TheHonestCarpenter]

You’re welcome, Colin!

[@Robot007]

Believe me, Rosetta stone has many mistakes. The honest carpenter is much more accurate. :)

[@gregarmstrong6077]

@@Robot007 The original rosetta stone or the language learning software? I feel like you're not on the same page.

[@snafubar5491]

Yeahhhhh......nope. Maybe if said Rosetta Stone was shattered, mixed up, and missing some important parts and someone came long put the pieces together in 12 minutes and did the Pigeon Dance (strut around, puff out chest, poop all over everything).....lol. Not gonna learn 'All' about framing a house in 12 minutes, and is dishonest to claim it. Especially when not mentioning some very important things any good experienced carpenter would know about.

[@rchydrozz751]

My dad was a building contractor. First started as a licensed electrician to then buildings. I worked with him when he needed me, and a few years out of high school, until I had an offer come along in the automotive industry. I still lived close by and was there when he needed me. In between building homes, we would trim out others. With the exposed framing he would show me the mistakes others had made. Easy to correct ones we made, some major ones we couldnt continue until corrected. It was good to be taught the right way, and then be shown what others had done wrong. That brings home what you are taught and why you do something a certain way. My father had a good reputation. He knew the building codes. You'd be surprised the ones that dont have a clue, and see what they can get away with. The city wanting him to be a building inspector. He told me he refused, because he made way more as a contractor. Those days were some of the happiest days of my life. I still love the smell of cutting lumber. Its funny how your mind works. I can smell the cutting wood, and be instantly taken back.

[@CallMeStermii]

Love this. I’m about to graduate electrical eng. my dad knows how to do virtually anything. Unfortunately it took my until my late teens to start learning the trades from him, but better late than never. Best wishes.

[@John-Andretti]

@@CallMeStermii Late teens? Man I wish! I am learning in my early - Mid 20s. I’m learning from my mothers long time boyfriend a Custom home builder

[@gary19222]

Good stuff man!!

[@devnull5098]

I'm not a carpenter. I only built two things out of wood my entire life: a dog house out of wood pallets, with a sheet metal roof. And a large chicken coop that had 8' walls, and a sheet metal roof, all sitting on concrete blocks, and withstood two storms with winds in excess of 60mph. It's not likely that I will ever be in a situation again where I can work with lumber, the smell of cut wood definitely takes me back. Even the smell of cut firewood brings back very fond memories.

[@SunHandsMrak]

100% jobsite smells are like a time capsule

[@D3DGalaxy]

I’ve been doing framing for about 6 months. And I knew what he was talking about the whole video so I feel proud that I’ve been learning lol

[@dumtree3727]

I did framing over the summer and feel the same way

[@halloweenjunkie740]

How is it? Starting my framing job soon.

[@halloweenjunkie740]

@Clayton's Riot I'm starting out pretty low because I'm learning from scratch with zero experience, but I will make more over time if I'm good at it

[@arnoldduran4953]

@Clayton's Riot I met this one kid and his Dad on a new job site i started working on. I applied for a laboror position as I had minor experience doing several things. Even though the son was like 7 years younger than me - he was like 21 at the time, that kid showed me alot, and so did his dad. If it wasnt for them i probably would not have lasted the 3 months i was there for.

[@nookbandit]

Been doing it for 33 years, it’s a great career.

[@Bane5393]

Best explanation I've ever seen on YT. Great video 💯💪🏾

[@charlescater2u]

General Contractor, Contractor, Carpenter here; Your videos & explanations are Superior! Your ability to explain in such simple terms demonstrates your extensive understanding/knowledge of your subjects. It's refreshing to see someone else with passion & a sincere desire to help & share their knowledge with others.

[@HOEA-WAKA]

Yes agree

[@ryanvenhorst8135]

I have been teaching architecture for 19 years and I'm always using pictures and lecture to describe the framing members in residential construction. While I love to hear myself talk, I know that I can only hold the students' attention for so long with my stories (experiences) of time in the construction trade and how each of the members function. This will be my new video for communicating these pieces. THANK YOU! (and my students will unknowingly appreciate it too :) )

[@ifeanyijosephjonathan2389]

How can I be your student, from Nigeria?

[@ajcardenas8691]

Hi I'm 15 years old from Texas and Im interested in architecture , is their any way I can hear your experiences and advice

[@Lilbuddi1958]

God bless you!

[@petermgruhn]

I worry that it's a little too fast for the noobs. And a couple places where the photos didn't match the diagrams or weren't quite clear. If you know what's happening, it's a fun whirlwind tour. If you don't already know... Is it that useful?

[@loganpreskar9209]

I learned more watching this video then I did at my construction, trades class in high school the entire year

[@donb8447]

Now I have a 12 1/2 minute tutorial I can have laborers/young carpenters watch so were all on the same page! Thank you!!

[@clayclaps3002]

Are you a teacher or owner of a company?

[@AC.Prince]

Don, that's a great idea, just got find someone who wants to work , that's hard in my area

[@swagmonster7]

You hiring?

[@danielsterling4918]

Young finish carpenter and glazier here in Florida. It's definitely important to know this stuff if you work construction, even if your trade isn't rough carpentry

[@sweetray1860]

@@AC.Prince pay enough and you will.

[@jakewood1930]

I've been trying to get my builders license for months now and have never found such an in depth, clear, well developed explanation to such a big building topic. Awesome - thank you

[@cameronbachman8161]

You're going for a builder's license with no experience? Jesus christ

[@paulpray5394]

Didn't know you needed a license

[@FC0BCA7E7A]

@@cameronbachman8161 what is wrong with that? That’s like being turned down for a job out of college because you have “no experience”. Your comment is the dumbest comment I’ve ever read.

[@arthas640]

@@paulpray5394 varies by area but in many places general contractors license is like an endorsement on top of a business license. Some places you have to pass a test.

[@kaomatic]

as an electrician who wants to build my own home one day, i now realize i know nothing about framing haha

[@Jmoneysmoothboy]

You do the framing and I'll do the electrical so it can fall down AND burn down

[@mariogatica2363]

Is an electrician joke ??

[@DarkVoxels]

same situation :D a lot of electricians wanna build it seems!

[@marcsheldon6512]

When in doubt add another stud...you cannot overbuilding! I always put in two jacks and two kings on all windows a doors...triples on overhead garage doors

[@davegordon6943]

@@marcsheldon6512 hell yeah me too. 5'10" rough opening for a front door and since it's less than 6 ft one jack and stud is fine for allot of builders. If I'm pissed at the old lady and want to slam the door I want it to slam haha. I agree, overkill when in doubt. Like my corners extra strong too.

[@blaster-zy7xx]

I helped my Dad build their house when I was in college. I didn't know anything about building a house then. He just showed us each step and we repeated it. After that, I knew all these terms except the special names of the vertical studs around a window frame. Very good overview. I wish we had KZbin back in the day to give us a good primer. Later I finished my own basement including framing, wiring, plumbing , dry walling, paining , trimming, etc. People would ask how I learned all this stuff. I said, "from my Dad, but it wasn't like a had a choice at the time." Now I'm really glad I learned to do this stuff, even though I don't do it for a living.

[@charlesg7926]

Jack stud and king stud 👌

[@blaster-zy7xx]

@@charlesg7926 Is there a queen stud and a 10 stud to make it a flush?

[@wingerrrrrrrrr]

@@blaster-zy7xxthose are used only in bathrooms to support the toilet-

[@blaster-zy7xx]

@chris falkenberg I am the passenger And I ride, and I ride I ride through the city's backsides I see the stars come out of the sky Yeah, the bright and hollow sky You know it looks so good tonight I am the passenger I stay under glass I look through my window so bright I see the stars come out tonight I see the bright and hollow sky Over the city's ripped backsides And everything looks good tonight.

[@blaster-zy7xx]

@chris falkenberg Gozer the travelor, He will come in one of the prechosen forms. During the rectification of the Vuldrana, The Travelor came as a large moving TOR! Then during the third reconciliation with the last of the mectrican suplicants , they chose a new form, that of a giant SLOR! That zuklu knew what it was like to be roasted in the depths of the Slor that day I can tell you.

[@ericblair6046]

Thanks for this great video. I framed houses for a few years when I was (much, much) younger, and while the work was hard and the hours were long, it was some of the most satisfying work I've ever done. Just incredibly gratifying to BUILD something that you knew would still be around after you were gone. Honest work. Nothing like it.

[@marksmith8421]

Same here pal

[@notbrando2271]

I currently work at a truss and framing fabrication center building roof trusses, I just work the other end of your field still satisfying tho

[@marksmith8421]

My brother n I n very close friends built homes all our life my grandfather was a contractor my father was a contractor I was a contractor we wrote our names on every home on the rafters mostly n it is extremely hard work long hours n low pay but u r right very gratifying I miss it but still have all the knowledge I'm a disabled veteran thank u for replying God bless

[@fukkitful]

@@marksmith8421 Yes, its rewarding having something to show for a hard, hot as fuck, day of working.

[@analyticalhabitrails9857]

GOD bless you sir. We need honest men now, yall are shining gems highly sought out for!!

[@almy-qy1lf]

I'm a computer guy with close to zero knowledge on carpentry and house building, but I've always been amazed at construction work. It's long been a hidden fantasy of my geek self to build houses. Your videos are inspiring.

[@Heyemeyohsts]

I was a computer guy turned house framer

[@Jack-vm1fg]

​@@Heyemeyohsts I am currently a computer guy who wants to know more. How did you make the switch and was it worth it?

[@Heyemeyohsts]

@@Jack-vm1fg I asked my boss if I could go part time. And then I got a part time carpentry job. Eventually I went full time. And then I started a framing company after a few years. It was worth it in the long run. In the short run, it was a lot less money. However, keeping my sanity was well worth it

[@Gr8Incarnate]

Even if you don't work in construction, it's always good to have basic knowledge and even try stuff. There are many things you can do yourself without having to pay someone.

[@JackKirbyFan]

The only frustration I have is that you don't have more views and subscribers. You are a natural teacher and it's clear you put a lot of time into this. I love watching your videos every single week. Thanks!

[@dodopson3211]

He sure is, I'm subscribed too and the only wood I've ever cut were tree branches during pruning.

[@MrCaveman74]

AGREED!!

[@buddyg1408]

Because he doesn't know what he is talking about

[@markcole3600]

@@buddyg1408 Explain?

[@capecodder04]

​@@markcole3600 He can't explain because he's a troll. I'm 60 and I've been in the building and remodeling trades since I was 13 years old and I have a Bachelor of Science degree from Wentworth Institute of Technology located in Boston Massachusetts in building construction technology and I watched this video out of curiosity and I see no problems with anything he said.

[@fatdoctor007]

As a complete ignoramist starting a remodel, you not only stated the essential need for your video at the beginning, but did a GREAT JOB TEACHING! Thank you.

[@13612]

36 year commerical carpenter here, you did a good job for explaining to folks. You'd be surprised at how many "commerical carpenters" don't know a lot of these, much less how to take advantage of a speed square or lay out a set of stringers with a rafter square. Good job for home owners or those wanting to know some basic stuff!

[@blaster-zy7xx]

Laying out stair stringers and getting it right is alot more tricky than it appears at first. I don't think anyone ever did it that didn't mess one up.

[@gmburzynski68]

Your comment made me smile,, put a steel stud guy in a wood framed house they would be lost!! Stair stringers,, need rise and run measurements and number of steps to come up with the proper dimensions. I remember those days!! Stair day(s) and cutting a roof were my favorite days. How many people can use a rafter square for common rafters. Or do the step downs for hip/valley jacks? I am stuck in the commercial world as a GC, I miss the days of constantly brushing off sawdust

[@mozerdude8102]

I’m with you Greg, I’m a retired carpenter and commercial carpenters thought they were the shit but they couldn’t frame a house let alone build a set of stairs or cut a conventional roof, hopefully new generations of people will want to learn a respectable trade if college doesn’t seem like that’s something is for them.

[@13612]

@@mozerdude8102 Not all of us "commercial carpenters" are lacking the skills to do as you mention. Far from the contrary for some and far more skilled than the typical "wood butchers" that I have had come to work for me outside of knowing some basic principals of layout...yeah there are a lot of cocky folks on both sides of the fence for sure....don't discredit the other side of the carpentry trade...it shows you are no different than what you put down.

[@mozerdude8102]

@@13612 again your using the term “wood butchers “ like your something better proving my point you think your better!

[@shannonflynn8180]

I cannot thank you enough! Studying for my NCIDQ exams and you broke down a chapter that took me 3 hours to try and fully understand into 12 minutes. Bravo. Thank you!!! "And the Academy Award goes to.... "

[@TheHonestCarpenter]

That’s great to hear, Shannon! I’m going to make a very extended version a🥲of this as an online course. Two hours explaining, in a general way, how houses are built. 🙂

[@_K_W]

As a guy having a house built currently this was by far the most informative thing I’ve seen in a while. Some old terms and new.

[@GyprockGypsy]

I'm a 6th year steel stud commercial framer and lathesman who recently moved from the big city to the countryside, and this video was exactly what I needed. The only thing I would add is that a Knee-wall is also often called a Pony-wall. Thank you very much for another great video.

[@concerned_2023]

@@mind_of_A Liability.

[@michaelvollrath3192]

@@mind_of_A Additionally, commercial walls are often framed with metal studs instead of wood.

[@alexfair6653]

@@mind_of_A What Michael said below is a large difference between the two types. And quite common practice for a commercial building is concrete (sometimes lightweight concrete) slabs on multiple floors with large steel columns, girders and beams as the main framing, this is usually done by a steel erector contractor. Then a separate contractor comes in and puts up all the interior framing with is usually aluminum since it is lighter(wood can add a lot of weight on very tall buildings), always straight, in some locations metal framing can meet stricter fire code due to it being metal instead of wood, also aluminum framing can be cheaper than wood framing in long term, and it can have a longer life span than wood framing for large buildings due to being metal instead of wood. Now you can also often see apartments or some hotels which do wood framing. (Source: me as a commercial construction inspector for 8 years). Here is a link for basic on commercial vs residential construction. www.cdmg.com/building-faqs/commercial-versus-residential-construction

[@drrexol]

I have done a little metal framing working out of the union.. Metal framing is one of the most complicated parts of carpentry Once i worked on a balcony shaped like a football about 75 ' in the middle.

[@DaleFrazellNewConstruction]

Steel studs/metal beams/metal doors/fire retardant materials vs. wood@@mind_of_A

[@juniorsosa3237]

As an electrician, I’m happy to say I feel familiar with most of these terms… all thanks to construction managers teaching me while wiring houses. The more you know about trades that go before and after you, the better quality you can offer. I love making trade partners job easier.

[@TheHonestCarpenter]

That’s how I felt as a carpenter, Junior. You have conversations with the other subs that you just can’t get anywhere else 🙂

[@Dontexxr]

As an hvac tech on doing install I second this....

[@dionh70]

I do handyman stuff when the big contracts are few and far between at my day job. I knew about half of these terms and functions, so I'm extremely glad that I watched this video. I learned as a young guy that there's ALWAYS something else to learn, and an intelligent person is always on the lookout to grab extra knowledge.

[@herculydia]

I've been framing and building for over 45 years and worked simultaneously as a city inspector. This video is clear, accurate and easy to follow. Thank you for helping out those who are framing and those who hire or purchase homes and additions.

[@RubicksProductions]

Let me say, as a home owner, that the fact that you're continuing to educate yourself is a great and something I wish many more inspectors practiced.

[@herculydia]

@@RubicksProductions doing the right thing helps everyone down the line.

[@joefranks4235]

I took wood shop when I was in high school in the 70's. We were taught the "old way" regarding framing. One of our final projects was to build small scale homes using the building technics we were taught during the year. We were allowed to add any additional items to our homes. Some of us added lighting, and of course for me the outside appearance of the home was important. So I gave the fireplace a brick techtured look. Needless to say we got an "A" on our home, as well as the other groups. The shop teacher held a raffle and each group pulled a ticket number out of a hat to see who won the house to take home. Bummer, I didn't win ours, but it was a fun project. I used those technics when I did update construction on my parents' home years ago. I wish I would have gone into the trades, but at that time it was difficult to get into apprentice programs. Now, they can't find enough people for them.

[@KLP99]

Hey Joe, we're about the same age! I graduated in 1973, as did my trophy wife. 🤠 Where I lived the cool crowd went to the university, not the trade school in the area. I'm happy to report the guys who opted for the trade school (not because they couldn't get accepted into college) are the ones who retired a decade or more ago as successful business owners. The rest of us are either barely retired or still working. And not in the field of their college degrees.

[@bbtg]

Giddy up

[@maldor56]

It’s not even that they can’t find people it’s that people won’t just stand their while their supervisor screams at them. We had a 22 year old walk off and quit last week. No notice or anything. I’m in my 40s now so I’m too old to do that but boy I wish…

[@Endorfen2011]

As a contractor of 35+ years I must say this is an excellent and compact break down of most homes. Thanks

[@lisaweigand524]

Thank you for sharing! I love knowing I can spend 12 minutes learning about something I previously knew nothing about. Time well spent!

[@Jansporter2]

As someone from the Philippines, I have always been fascinated by American stick framed houses. Our houses are typically built with either poured or block concrete. I was always curious but never found a simple video explaining what all the pieces are for. Loved the vid!

[@tealkerberus748]

I'd love to see a tute like this on how to build concrete block housing. How do you get it to acceptable insulation, and what do you have to do to make it waterproof? I'd trust concrete blocks to last a lot longer than stick frame, but it has to be good to live in too.

[@daniel1970ification]

Or nippa !

[@ErikB605]

@@tealkerberus748 Autoclaved aerated concrete at twice the thickness of a woodframe house provides comparable insulation. The advantage is that you have a lot more thermal mass letting you store the the cool temperatures of the night in your walls which is probably quite nice in a hot country like the philippines.

[@tealkerberus748]

@@ErikB605 Thank you. I'm unconvinced about thermal mass in a hot climate - if it heats up and stays hot that gets unpleasant fast. In a high diurnal shift climate, so with hot days and cold nights, thermal mass performs brilliantly. And I'm looking for a building system for a cool mild climate - almost always too cool to be comfortable, but rarely if ever freezing. So it's different again.

[@ErikB605]

@@tealkerberus748 wseas.us/e-library/conferences/2012/Paris/DEEE/DEEE-20.pdf Besides Insulation and Thermal Mass you might want to consider the other side of the energybudget. If you live in higher latitudes overhangs will provide shade in summer but will let the sun in during winter. Windows with low energy transmittance in the south will limit heating through the sun midday and windows with high energy transmittance in east and west will give your house some free heating. I would recommend you read "The Passivhaus Handbook" by Cotterell, J.

[@williamjenkins9]

I love this work…. I can’t get it out of my system …. Fun , actually, and rewarding …. and I lived through so many innovations to the technology

[@CLCinflorida]

Hello THC, This is a fantastic "Framing Explained Video"... My Husband passed away from Cancer and left the upstairs unfinished, There are no Stairs, Windows, and only a few pieces of the Plywood Floor down... This has been very helpful... 👍♥️🤗

[@TheHonestCarpenter]

You’re welcome, CLC! I’m sorry to hear that, but I definitely wanted to do this video for folks in situations like yours. It helps to demystify the process a bit, and show that the fundamentals of framing are really pretty simple. Good luck with any work going forward!

[@CLCinflorida]

@@TheHonestCarpenter It really does supply an understanding in knowing what needs to be achieved to construct a Sound Structure, and I really appreciate this Video, Thank You 😉👍♥️

[@domm6589]

It's nice to eventually see someone that knows what they're talking about!

[@sathapalani]

This is an extraordinarily well put together video. As a home owner who has done extensive structural renovations, I understand how important it is for home owners to get a good understanding of the basics of how a house is put together. Really appreciate your sharing this

[@cojim]

When I was an architecture student way back in the 1960s, we were required to take a shop class in which we learned to use basic woodworking tools to cut lumber down to tiny fractions to create framing members, such as 1/4-inch x1/2-inch studs, which we then assembled into a scale model of a fully framed house -- plates, studs, joists, rafters, etc. While it may have seemed like playing with Lincoln logs as a kid at the time, it was an invaluable lesson for designing houses, apartments, and small wood-framed commercial structures, as well as understanding the real work as it developed in the field. Probably not as good as working on a construction site during summer vacations, but it sure helped us to avoid designing things that couldn't be built by the average carpenter in the field. Plus we could communicate with the workers using the proper terminology and not look like the complete idiots they seemed to think all fledgling architects were.

[@Trapperjohn1000]

My dad has been a residential building contractor for 20 years. I just started my business last year and I’m learning so much. Thanks for this video.

[@James-jq5fq]

I'm a house painter . I've always been around construction but never really knew all the terminology for what I was painting! Thanks for the great video . I love the trades and hard work we all put into it . Y'all be careful and do wear ear and eye and head protection!!! God bless !

[@luisamador7777]

That's right safety first. You never know when it's your turn wear your helmets lol

[@MapleBar777]

I framed for a little over two years (basically the lead framer’s cut man). This was a good refresher. 👍 Edit: like 14 years ago so I’ve forgotten some things 🙃

[@Jmoneysmoothboy]

I like how building a house is extremely complicated but it pretty much comes down to using a chop saw and a circular saw a bunch of times then nailing everything together

[@stephenhiggins8744]

I framed houses for over dozen years and built homes for 2- 1/2 decades. What you're describing is how we used to build a house back then. All studs, joists, rafters, all called sticks, are lined up from the concrete base/foundation, to the roof structure, or rafters. It always seamed obvious that should be how to make the structure as strong as it could be with these materials, but after 15 years of retirement, I helped a friend build his home and I joined him after the frame was completed and passed the inspections with flying colors. The framer in his area, was considered to be of the best in the area. One of the first things I noticed was there wasn't a single jack stud in any of the windows or doors. The jack studs are there to hold the headers in place and allow for the weight from above it, to be dispersed to the stick component below it. I was told that the jack studs aren't necessarily anymore, and alls I could say, is there not needed any less either. There were several other things I wouldn't have allowed, had t been my house, but I didn't want to argue an issue that my friend insisted was correct. I'm just wondering when he'll get enough of a snow load that his windows and doors will start showing a problem?

[@louisliu5638]

EXC. point about "not needed any less"; I'm in BC Canada and we've gone to 2x6 exterior walls and even 2x8 for a 1.5 story open wall facing south on a relatively small house build. We ALSO have gone to earthquake anchors (look like a large galvanized shoe horn) in corners on townhouse builds (really popular in BC). Even in rare earthquake areas. The same with all the tech. But I watch with incredulity the cheap builds allowed in windy, tornado alley and earthquake prone areas in the USA. What?? Meanwhile we're shuttering our lumber mills and keep getting the softwood lumber issue banged up by US interests. The sure aren't US consumer interests! You would think the USA would want all the lumber it could get.

[@jobacuda4472]

@@louisliu5638 Cheap builds and expensive builds all go flying during a tornado.

[@yahusha4life]

See why retired still don't mean not needed 😉. Sorry u friend didn't value your opinion but I do 😊

[@stephenhiggins8744]

@@yahusha4life thanks

[@stephenhiggins8744]

@jobacuda4472 not many tornadoes in Pennsylvania

[@Mo-Though]

I know nothing about framing, but after watching your video, I feel like I could actually carry a conversation about it now….very informative… even though I am no expert by any means your video had so much detail and made me want to learn about carpentry in general. Thank you.

[@harryl7946]

I watch so much about building and the terminology used - my head expands when I learn something new. Now I need a larger hat 🎩

[@matta.5363]

Very informative! Thanks for posting this. Also, ppl should know that roof trusses are indeed stronger, but with trusses you loose the attic storage space that you get with rafters.

[@nateg5915]

Many Houses over century old were build with rafters still standing today. Theres no questioning the strength of rafters.. The only reason trusses are popular like any new thing in construction is that it saves time in the building process and we all know time is money. Otherwise as a homeowner rafters over trusses all day everyday

[@Clambelly]

Trusses can be designed / built to create vaulted ceilings and bonus rooms in attic space with negligible loss of interior useable space.

[@crookstonable]

Thank you for publishing this excellent content. This is one of the most informative construction teaching videos that I have ever come across on KZbin!

[@TheHonestCarpenter]

You’re welcome, Matthew! Thanks for the positive feedback 😄

[@coloradomountainman8659]

I've been building custom homes for over half a century and have seen a lot of changes in the industry. This video is extremely spot on, and sure, I could add in some comments and point out some improper building practices, but I'll hold my tongue as what you presented was spot on and earns you an A++ in my book. Oddly enough, as I near 70 years of age, I still find myself loving the work, especially the framing, though I must admit I do not much care for heights anymore.

[@TheHonestCarpenter]

Thank you, Colorado! 🙏

[@Randor10]

I have been modeling my retirement home using SketchUp. Every time I get an update from the architect I put it into the model. We’ve finalized the plans and I’m now modeling it from the ground up, stud by stud. Every time I get to a new piece of construction, I.e. foundation, flooring etc, I research how a carpenter would be building it and incorporate that into the model. It’s a lot of work, considering most of it will be hidden, but I sure am learning a lot about construction techniques. Thank you for all the information provided in this video.

[@cj3988]

Thank you for this, the people I work with aren’t the teacher type.

[@TheHonestCarpenter]

You’re welcome, CJ! I grew up on job sites-it can be hard to get information out of people sometimes. Just keep plugging away at it. The big picture will start coming together real soon 👍

[@ace88bf]

Most lead framers aren't. The industry just becomes a dick swinging contest of a bunch of guys who think they're the best, lol.

[@t0mmych0ng46]

Yes sir

[@TimAwolz]

@@ace88bf right? And now we have a complete lack of educated kids in the industry. I sub as a carpenter for a B/K remodel dept in a heating, plumbing & A/C company and their co-op students are the worst - so lost. The student electricians can't wire a 3-gang box, plumbers can't always get hot & cold correct, all drag their feet and show zero initiative. It's a constant mess that I've actually become a fantastic drywall finisher because of the repairs they make me do - I'm a tile guy/cabinet installer/finish work by trade. From constant hands in their pockets to hands wrapped around a phone, they don't have an interest to learn but love to throw the title of "electrician" or whatever around to their friends.

[@ninji5226]

I recently bought one of those "do all in a home" books to get the knowledge you just dropped on us and I wish I would have seen this first because that book sucks and I could have saved 14 bucks. Quick, simple, and to the point....respect and subbed!!!!

[@K4R3N]

Always youtube first! EVERY TOPIC

[@DarianDT]

Very good knowledge. I wish I could do this kind of work. My uncle is a contractor and he can build an entire house from the ground up. Every time I asked him to teach me, he told me to go to college and work at an office job. He thinks his job is for people who couldn't go to college. An office job is not my passion.

[@calbert1735]

Great video and fantastic presentation and knowledge and communication. Your library of content should be required viewing for all trade schools. And for every homeowner. I can't understand why you don't have a billion subscribers by now. Keep being an inspiration and a role model for all people.

[@ItsAsparageese]

Very well said. This guy isn't just a really knowledgeable carpenter, but also an fantastically gifted teacher. He organizes and explains the content so well that it's a masterclass in well-constructed video education. Love everything about this channel.

[@doubledanzaXX]

I learn so much carpenter terminology from this channel, I think my father in-law will be impressed when I use the correct name for each part of any project we build. 😁

[@IVORY123100]

Depends where you live . I have heard certain framing members called " Bird boxes , backbones , jugs , pork chops .king rafters , fly rafters , cripplers etc .

[@tealkerberus748]

@@IVORY123100 It'd be fascinating to have someone map where different terms are used for various members of a stick frame house around the world. What my dad called a jack stud I've heard American builders call a crippled stud, but around here a crippled stud is one that is cut partly through to straighten a bow. And so we go on.

[@audreywy1743]

Great video. I've always done the majority of my home improvements, less major electrical, plumbing and structural issues. When I've called a contractor out for a quote, 90% of the time the contractor will talk down to me or out bid himself. The contractors that I have hired have all always said, most contractors don't like the clients understanding the scope of the job because that will typically indicate a micro managing client. They also say, those are the contractors you don't want anyways because they do subpar work and don't want to get caught. They say it's very rare to have female clients that has construction knowledge and that is probably the main issue for me. Oh well, I'll continue to learn and improve my skills. Thank you for another great video.

[@cw9790]

That's exactly why I learn all of this. I'm glad to know there are other people like me out there.

[@michaelcifarelli94]

Yes, I agree. I consider myself a pretty advanced DIYer as I've tackled many jobs that even most other DIYers would hire a contractor for. And I suppose it's for the reasons mentioned above that contractors don't seem to like to deal with me. The few times I have dealt with them I've noticed that once I start talking in their language and show my knowledge they get skiddish and/or don't show up. I guess I know too much and I'm not good at playing dumb. Maybe they're afraid I'll be too on top of them and won't let them do it their way or whatever.Don't get me wrong, I'm sure there are many great contractors out there, but this has just been my experience.

[@davidgibson9781]

Oh wow 👏👏👏. Funny how you "professional diyer's" call contractors out to your homes to begin with. I bet you guys are the type to call plumbers/hvac/electricians out to your homes to diagnose stuff you can't figure out just to complain about their prices or do the job they helped you figure out. You should be proud.

[@davidgibson9781]

Usually my customers that have the most difficult and costly issues are ones who bought homes from "professional diyer's" who thought they knew how to save a few bucks. Some things should just be left to licensed professionals.

[@michaelcifarelli94]

Typical anti-DIY sentiment on here. What's the matter - not enough customers who don't know which end of the hammer to swing that DIYers threaten your business somehow? Like I said before, I'm sure there are some great contractors out there, and then there are some with attitudes.

[@user-Army11Bro]

I work for a company in Tucson Arizona and learning all the time on building and framing.

[@ButtersH]

This was a great explanation of framing terminology, especially for a first timer like me! I'm looking to build my own tiny house on a trailer someday, and this really helps me understand all that framing jargon I see in those other DIYs. Good job and thank you so much!

[@RO-gc6sb]

You have explained my new job as a framer so perfectly... The guys on job sites already , unless they're good at teaching on the go, don't really have time to teach new guys like myself all the basics, so I find myself learning slower than I'd like, and slowing them down as a result. This is the first video of yours that I've seen, but it's worth hitting that subscribe button. Thanks so much!! You have pretty much secured me a good career... with a quick 10 minutes of advice.

[@shatoyancy9102]

That’s too bad. Part of getting paid more to be a lead is making sure everyone on the crew learns how things need to be done and should always take time to make the team better for it.

[@dont.ripfuller6587]

Ive been there in other fields, its hard for some people that know their field well to figure out the stuff that is very obvious to them after years and years but not obvious necessarily to someone fresh. Sometimes these little perceptions can cause a block in understanding a whole section of the field and create a lot of fustrstion between the jerk lead and the numb skull new guy. But then you have that moment that unlocks the matrix and youre just like "ohhhh so thats why this has to be like this so that that will be set to do that and not be in a bind from getting this ...." You get the idea... Takeaways- always keep trying, do what you can do the best that you can, ask questions and ignore other people's irritation at you not knowing everything. Most of us would like to work with a clone that already knows what we want done and how we would do it, without saying, getting mad about not having that is on them, not you.

[@kollandersen5694]

Ethan, thank you for your work producing quality educational videos. You are a gifted carpenter and an equally gifted teacher. As a retired fire fighter I have studied building construction for years and I appreciate your direct and honest approach to building construction and other topics associated with home repair and carpentry!! Keep up the good work!!

[@TheHonestCarpenter]

Thank you, Koll! Always happy to hear from first responders! I’ll keep the videos coming-thank you for the support 😄

[@User_2026_]

Maan!! Iam a new comer to Canada. I have 14 years experience in concrete building and need to learn about wooden house framing. That was really the most useful content to me. much greetings!

[@BluTrollPro]

This videos great, I'm a structural engineer from Scotland, hoping to move to the US sometime over the next couple of years. I've followed your videos from a practical hobbyist standpoint for a while now, this though was absolutely fantastic, I've designed timber framed buildings for the best part of 5 years now, it's really interesting to see how they do it in other countries though, particularly the different terms used for the same components.

[@pacadet]

Hope you get your chance to come out here, we'd love to have you.

[@Stuarttombros]

Loved this I did some framing on a small crew but didn't have much experience before that. It was cool to be able to recognize most of the stuff you talked about, and to get detailed explanations about the reasons behind why the journeyman had us build things the way he did.

[@EuropaMan]

Extremely well presented Ethan with great graphics to back everything up. Very helpful even for us old-timers who think they know everything about construction!

[@user-pm5pu-Gladys]

I do handyman stuff when the big contracts are few and far between at my day job. I knew about half of these terms and functions, so I'm extremely glad that I watched this video. I learned as a young guy that there's ALWAYS something else to learn, and an intelligent person is always on the lookout to grab extra knowledge.

[@micl078]

As an hvac installer this helped a lot. If possible a video on what can be cut or bored through and how much would be helpful. New installs sometimes require this and it’d help to know and understand how much can be cut/bored/trimmed.

[@maclnmacln]

in my area round bored holes through studs, floor joists, etc the diameter of the hole can be no more than 40% of the board you are drilling through. In. 2x4 the hole couldn't be bigger than 1.4 inches. Notches can not exceed 25% of the bored. 2x4 notch couldn't be bigger than .875 inches. That's the code for my county.

[@arthendrickson4860]

Thanks for explaining that detail. Next video suggestion: inside/outside corner framing explaining the detail like the stud pack.

[@TheHonestCarpenter]

You’re welcome, Art! I definitely want to tackle corner framing soon. I’ll try to cover California corners, 4-studs, 2-studs...the whole arrangement!

[@HeirloomBuilders]

Agreed. Here’s one about outside corners...kzbin.info/www/bejne/qWbQpoWVl6-FnZo

[@QuincyMalik]

I'm studying to be a certified home inspector and this has really helped me understand the basics when it comes to framing and what defects to look for . My current teacher did not explain it as good as you . I am thankful for you taking time out to educate us all . THANK YOU !

[@scottpodgorski4102]

Ya, most home inspectors should be required to work in the trades before getting certified. Most have no clue what they're looking at if its not in a book.

[@simpleman283]

@@scottpodgorski4102 They can look at a book & still not know what's going on. Most of them remind me of what we used to call "Stupivisor".

[@jwm6314]

@@simpleman283 Every home inspector would be too old to climb a ladder if they had to be experts in every trade. It would take a lifetime.

[@simpleman283]

@@jwm6314 lol

[@scottpodgorski4102]

@@jwm6314 noone said expert.

[@shopart1488]

I would say you did a perfect job describing framing. It’s one of my pet peeves everyone calling every piece of lumber a stud. I gotta say I did not miss any of the correct lingo. Great job on the video.

[@rescuedmx3717]

Another great video! Being a Firefighter you become (or should anyway!) very familiar with building construction! This is a great, quick breakdown of some very important parts of framing for sure! Honest C...you’ve done it again!💪🏼👊🏼

[@rickyellis242]

Been inspecting homes for almost 20 years with a construction background. This video was very well thought out & informative. Would love to send this to all the Realtors & clients who I inspect for in the future. Would make my inspection summary so much easier for them to understand the concepts behind my report. Great video, I enjoy your passion.

[@nraynaud]

I am French, and the difference is really interesting. We have access to and use the same general rules of mechanics (basically use triangles everywhere, and you really have a rectangle brace the diagonals), but the results in the detail of how a house is built is just crazy.

[@jraaccounts]

are there any videos showing the details of how houses are typically built in france? i'm very curious about the difference(s). i thought that wood framing is far less common in europe and especially france than it is here, which would in itself result in big differences - am i wrong about that? anyway, if you have any links to videos about common french house building methods, i'd love to watch them.

[@nraynaud]

@@jraaccounts maybe you could have a look at this: kzbin.info/www/bejne/ZoeVmWqHgsdmnsU it's typical, the guy is making the gables "livable" because the country lacks space to expand houses, he uses plaster board over a steel skeleton, and he has to use a ridiculously high R value insulation under the roof by law.

[@ACoustaDC]

I am just a diy'er and i have a friend that was working a new home doing low voltage install. Most exterior walls were up but inside it was just framed. It was amazing to see vents and fixtures and to be able to tell where bath, closets and laundry room would be. How the stove was going to be vented. It was quite remarkable as this was a 4000 sq foot home with turrets and a grand entryway. Everyone should have that opportunity and check this type of thing out. It helps understand how a home is made when you start working on your own home.

[@Audey]

I'm an apprentice electrician, and I've been looking for a video just like for a while now. So handy to actually know the names of framing elements so I can stop saying things like "We need to drill up through that big board above the other slanty one so we can run our wires over to that spot with all the short stubby boards"

[@internet_internet]

I like your description better

[@twowongs8266]

Great video! I'm a designer from Australia and although many of the terms and obviously the metric system used here, are different, the video shows in pictures what most people need to know in terms of structure and the build process. A good 'beginners guide' for the average consumer, well done :)

[@tonyhammer3588]

I already knew these terms due to my father owning a construction company but it’s a GREAT review for this old man. Thank you. New subscriber.

[@TheHonestCarpenter]

Thank you, Tony!

[@andyfer7716]

@@TheHonestCarpenter At 5:54 , the header is not sitting on jack studs instead it looks like it nailed to the king studs. Is this OK? I have a window in an unfinished basement that is bowing slightly and I think it is because the header doesn't sit on jackstuds. Trying to figure out if this is a code violation or something and if I need to get it fixed.

[@CatskillOne]

I’ll be honest, I’ve always dreamed about building my own house all by myself but knew nothing about carpentry or construction work. This video humbled me into realizing why you either leave some things to the professionals, or you spend ample time learning all about it before you take on them. It’s crazy how far we’ve come in terms of engineering and streamlining things like house building. Most people buy prebuilt houses and for them the actual building process is background jargons they’d rather not know about. This reminds me of buying a prebuilt PC vs building a computer on your own. Sure you need the necessary resources, knowledge, and a bit of leap of faith; but you end up with something far better, far personal, and often times, far cheaper. I actually wanna get into the whole thing of learning all these to find out for myself if you can actually build your own house all by yourself

[@blaster-zy7xx]

I helped build my Dads house who built small homes when he was young. I can tell you that no matter how much work you think it is, it is much more work than that. Doing "all by yourself" is foolish. It takes a team of people, and even then it is hard work.

[@brandonholmes1424]

What an incredible video, I love how he articulates himself and how concise he is, and makes everything so simple to understand, definitely subscribing and would love some videos on building decks if possible!

[@MarkSmith-js2pu]

Of all the systems needed in a home, I always found the rough carpentry to be the most fascinating. I had the chance years ago to volunteer to be a framing grunt with a master carpenter as the boss of about 10 of us. The guy was a genius as we framed and sheathed a large addition in a mountain cabin over a long weekend. It was satisfying to see the end product.

[@lonhetrick]

I'm an experienced DIYer and I learned that blocking is turned sideways in kitchens and bathrooms. didn't know that. Thanks!!

[@kevinmckenna9601]

THIS is the PERFECT description of building a house and the SKILL SET needed in EVERY respect....I will attach this video to all my clients to educate them on why they should never DO IT THEMSELVES, as well as justify our pricing!!! 😄

[@TheHonestCarpenter]

I’m happy for it to serve that purpose, Kevin 😁

[@jlirving]

Great video thanks 😊 Just started exploring building a new house and wanted to better understand what goes into the construction process. To better understand why it's so expensive and how to manage and cut costs this has been a great help!

[@dunexapa1016]

This might be the single most useful home construction video I have ever watched. You tie every component together simply and logically ... and quickly ... and in an enjoyable way *:)*

[@CrowdFave]

As a new WDO inspector, this video was EXTREMELY helpful. I obtained several great screen shots to help me memorize certain members and all. So much information that was easy to understand. Thank you!

[@bowmanjeff8]

You did Larry Haun proud. :)

[@TheHonestCarpenter]

Thank you, Jeff! That guy is a total legend. I’ve been seeing his face in home building magazines since I was a kid. High praise! 😁

[@allan14492]

Great video Ethan. I learned a lot from this one and everyone of your videos. Keep then coming.

[@PTFPhoto]

That's the code!

[@johngianoulis6968]

Seconded!

[@klmbuilders5385]

The first book I bought when I became a serious contractor was, "The very efficient carpenter" by Larry Haun. The second was, "Running a successful construction company" by David Gerstel.

[@cricklicklers9382]

Excellent! Thank you for such a succinct and week-explained, no fluff video. As a DYI builder, I came away with more confidence as I explain my work/ projects to my friends.

[@Jwii91Fox]

Thank you so much for making this video. I've been around frames just from DIY home fixes... I knew about 70% of what you have shared and I'm very grateful for having a full run down now I have a more complete knowledge of all the framing parts... THANK YOU.

[@ElainaGroos]

My dad was a building contractor. First started as a licensed electrician to then buildings. I worked with him when he needed me, and a few years out of high school, until I had an offer come along in the automotive industry. I still lived close by and was there when he needed me. In between building homes, we would trim out others. With the exposed framing he would show me the mistakes others had made. Easy to correct ones we made, some major ones we couldnt continue until corrected. It was good to be taught the right way, and then be shown what others had done wrong. That brings home what you are taught and why you do something a certain way. My father had a good reputation. He knew the building codes. You'd be surprised the ones that dont have a clue, and see what they can get away with. The city wanting him to be a building inspector. He told me he refused, because he made way more as a contractor. Those days were some of the happiest days of my life. I still love the smell of cutting lumber. Its funny how your mind works. I can smell the cutting wood, and be instantly taken back.

[@nothingmuch2023]

Being bilingual and gaining building skills on two different continents, naming what we're working on has always been a hassle. I will watch this again and again, until I've got the kings and jacks figured out. Thank you, for providing easy to understand content! I love your channel! Now, if you could only do it in Swedish, too...

[@trumpetmaris]

I know exactly what you mean. I am bilingual in German and every time I try to do a home project in Germany I noticed how different their building standards and methods are. It's fascinating but as you say also scary because there is so much more terminology to learn. I actually found a book called a picture dictionary which has all the hand trades in it with detailed pictures of the tools and equipment used in each trade. When I was living in Germany it was an invaluable resource in talking with other tradesmen

[@Jmoneysmoothboy]

If you're looking for a job doing rough framing then yes you should learn all the correct terms so you can communicate properly and so you're not made fun of. Once you get a job rough framing you had better cut that shit out real quick and start hollering for "TEN 2"x6" @ 120" instead. Actually a prime example of the names not being terribly important; A 2"x4" is neither 2" thick nor 4"wide.

[@daleinaz1]

@@Jmoneysmoothboy Once upon a time, 2x4s were green-cut 2 inches by 4 inches, and then dried. This is referred to as "full-dimension" lumber and is needed for repairs in old houses. Over the years, they keep getting permission to green-cut them another 1/8 or 1/16 of an inch smaller every decade or so. I don't know what the green-cut dimensions are now, but after drying, they are about 1 1/2 inches by 3 1/4 inches or so.

[@MM-iy9xu]

My grandparents used double-stud walls. Can you explain this. It was a sound,well-insulated home (we live in earthquake/tornado area).Love the education you are sharing with us!

[@Yukimaru0]

Are you talking about 2 2x4 walls with a small gap in between or a wall with extra studs? Cause the 2 2x4 wall set up with a small gap in the middle gives extra support to what's above it while also acting as a sound insulator. A wall with extra studs in it would just provide more support which also would make sense in an earthquake prone area.

[@MM-iy9xu]

@@Yukimaru0 It sounds like a 2 2x4 set-up.

[@risingdough8078]

This was another great video- a lot of material, simply and clearly explained. As a homeowner who has gone through two new home builds, it would be interesting to see a video on common shortcuts framers take that lead to future structural problems. We've been burnt with a $75K bill to correct issues in one of those homes. (Great town building inspectors, I know...)

[@dragoneyeshatesg00gle76]

the problem is each step of a build can have what you describe. poor footings, poor foundation/Concrete, poor framing, poor roofing, poor siding/watershed, poor insulation/drywall/flooring/finish, poor electricals, poor plumbing, poor drainage etc Every step has to be done correctly. short cuts can be one issue or simply poor application of good products. The key to contractors is to understand the swing of the pendulum the Cheapest bid and the most expensive bids are very likely going to be problems when you get the middle of the road bids and a number of them are in the same ballpark you've likely fallen upon contractors who know what they are doing because the costs are the same for a bid if they are based on blue prints and known quality of materials (prefab counters vs Marble for example) the costs of labor should run pretty much in the same vein (this is the real fluctuating part) The same can be said for How long the Project is estimated to take too quick or too long exposes issues with the contractor most will know X project should take Y time to accomplish barring changes.

[@andrescientos]

@Seek Him with all your heart and you will find Him One should choose not to be polluted by the world and seek righteousness by his own volition and not through fake displays of charity.

[@Zellie1994]

First-time home buyer here: Thanks for the explanations. I like to know the details of what I'm purchasing and this video helped a lot.

[@julietphillips1991]

You always do a fine job explaining stuff!

[@TheHonestCarpenter]

Thank you, Juliet! 😄

[@Leftyone78]

Construction manager here, I approve this message. 👏

[@robbiehiatt9966]

Then you need to get a new job

[@jamesbererton9584]

That was really well done. One question I have struggled with is why we build with pitched roofs for residential but virtually all commercial even smaller buildings use flat roofs. I understand the transfer of load to the walls, but a flat roof seems more efficient and useful.

[@mrcolesenglish1401]

Hi James! There are lots of reasons residential and commercial are typically different. The rolled roofing, rubber, and other materials used on a flat roof save money in a commercial installation, but the roof will need frequent maintenance. In a commercial building, especially one with many retailers in it, the businesses share these fees, limiting the cost. For a homeowner, it’s cheaper to install it really well once, and then never touch it again unless there’s a major issue. In a residential home, most people want a 30-year roof. Flat roofs generally last about 10-15 years. The flat roofs are actually “low slope” roofs that drain toward the middle or the outside, so even they have a little slope to them. Another reason commercial businesses prefer flatter roofs is the option to put large AC units on top - keeping valuable retail space below available. The big risks associated with flatter roofs are a tendency to collapse under snow or standing water, leaking, and constant upkeep. Again, if the purpose of the structure is purely economical, you can offset those issues with profit. If the purpose is residential, it’s just not worth it. Hope this helps!

[@jamesbererton9584]

@@mrcolesenglish1401 That helps. Although I do see flat roofs (2% sloped) even in residential. If designed for the snow load, there is no risk of collapse. Depending on the roofing material the life could be extended. Total life cycle cost should apply to either method. Is there any reason the pitched roof would be cheaper? More surface area and more material doesn't make sense to me.

[@jobacuda4472]

James, it's not a question of if a flat roof will leak. It's only a question of when.

[@jobacuda4472]

@@jamesbererton9584 As to snow loads, flat roof members need to be engineered to a much higher standard than pitched roofs.

[@jamesbererton9584]

@@jobacuda4472 but is the load that much higher and is the material cost of sloped roofs actually more expensive?

[@ellanmaestro2866]

I am a building inspector for 15 years. and I agree that's a great complete video for Entry building terminology 💪💪

[@baller84milw]

Much appreciation for this video! You explain everything so simple without being condescending. Too many old heads on constructions sites keep us younger workers in the blind when we're new and treat us like shit when we ask questions. Thanks again for the video, keep em coming.

[@johnnada1222]

That’s normal in blue collar jobs, some don’t want to teach you too much because then you become a threat to their job, some are just Aholes . Hope you get a good journeyman to teach you.

[@baller84milw]

@@johnnada1222 Facts. You get that vibe really heavy. It was so bad where I was working that they wouldn't even tell me where the oxygen/acetylene tanks were. I'd literally have to go to the division next to us (deep foundations) and ask them for direction.

[@JACk79457]

I am an electrician apprentice, this was really cool to learn as I only knew a few like king stud and joist and rafters! Really love your stuff man. Been thinking carpentry would be fun to learn too.

[@IPursuePeppers-CTH]

what’s electrical apprenticeship like? if you could i’d like to know the process you go through in the beginning, what its like so far etc....

[@thorfriis6284]

In Norway we'll use a layer of solid tar paper as a moisture barrier under the mud sill.

[@EuropaMan]

We used to do here in Canada too, about 30 years ago. :-)

[@tealkerberus748]

In Australia it's a thick plastic sheet. Comes in various widths for different wall thicknesses, and embossed so less of its surface is in contact with either the timber or the concrete.

[@curtiswaters7415]

I'm an electrical apprentice, this video helped me better understand what people are talking about when they refer to structural members. I'd love a video discussing older framing styles, like balloon framing

[@jonrevere7446]

@0:01 yes,it's when someone commits a crime and makes it seem like someone else did it.

[@jr.6976]

Thank you so much for this video!!! It was so hard for me to learn and remember all the names. Cant wait fir the next video!!!

[@dkorwood]

Man, this was perfect timing and so clear! Thanks

[@luisamador7777]

Want me to make it any clearer than that. I see everything he did awesome work make sure you always wear your PPE be save out there.

[@KM-cm1jp]

I work with my brother, and my friends. My brother is the cut man, and I’m the everything else man. I truly love my job, and love working hard. I have been in the trade for a year now, and have learned so much. :D

[@adampulka1986]

I'm taking an architectural building construction class and this was an awesome review video for me. I'll share this with my class. thanks for making it!

[@PC-vx6ko]

I’m glad you mentioned the I-joist knockouts. As an electrician, I really like them. Someone should let all the framers know that they exist so they can line them up so they can be utilized instead of ignored.

[@markharmon4963]

Try to work with a specific framing contractor on a regular basis and build up a mutually beneficial relationship. Communication is rewarding in it's own right. I have clients that like me just because we are and I treat them as colleagues trying to work out problems.

[@dragonmaker1541]

If they are ignored you need to run. Obviously the contractor has no clue about framing.

[@marcellondon443]

We know they are there. We alternate the trus joists to piss you off.

[@PC-vx6ko]

@@marcellondon443 I know we have never been on the same job. You use complete sentences, in English as well. Nice try though.

[@marcellondon443]

@@PC-vx6ko is that supposed to be an insult? Way too subtle.