🔥 Drywall partition ▶︎ How to Build a metal framed wall (70mm profiles) PLADUR

▶︎▶︎ How to Install Metal Stud Framing 👉How To Install DRYWALL🔻
• ▶︎▶︎ How to Install Me...
Studs and channels for interior
Its composition is galvanized steel type DX51D and galvanized Z140 or Z275 that make up the framework of the load-bearing structure of partitions, cladding, shelves, shelves and drawers. The C-shaped profile that is installed in a vertical position and that fits inside the channel is called a stud. The U-shaped channels constitute the horizontal element that is fixed to the floor at the top and bottom. Both profiles have a knurled aspect that ensures the fit. The uprights have notches or H-shaped openings in their soul that facilitate the passage of installations, for example electricity, plumbing...
There are several sizes but the most used are the 48mm and 70mm uprights and channels.
The uprights, despite the fact that when we work we use the name 48 or 70, one thing to know is that they always have a millimeter less than the channel so that they fit well inside it. For example, the 48 is 46.8mm wide and the 70 is 68.8mm.
These profiles are also used for mounting ceilings, especially when you don't have many options to hang from the floor.
Plasterboard plates:
These plates are composed of a plaster core with additives and covered on both sides with a sheet of cellulose. Its manufacture is carried out through a continuous lamination process and according to the standard.
They have a visible face depending on the type of plate you need, it can be cream, green, pink, blue, yellow that allows any final finish. The hidden face usually has a brownish hue. To facilitate the treatment of joints, the longitudinal edges are tapered. The transverse edges are cut. But there is also a type of plate on the market that has all the sharpened edges.

[@toliadis]

Great job...perfect analysis

[@targetedfordeath359]

Wow metal walls, never ever seen that before. This whole dreyewall thing is amazon !!

[@masp441]

Thanks man. The music was excellent.

[@cleversonbassetto200]

Fantastica demonstração abraços aqui do Brasil

[@jankojankovicjankov9720]

Nice work!

[@ernestogarciagarcia9708]

MAGNIFICO ERES UN ARTISTAAAAA

[@cotuonghaianhem695]

Vách ngăn thạch cao ▶ ︎ Cách xây tường khung kim loại (cấu hình 70mm) PLADUR rất tuyệt vời 👍👍👍

[@savadious]

This was great. Thanks !

[@boabmarlee]

Great idea for using off cuts in internal corners. Saving materials and money. Proper job 👍

[@rogeliolopezescobar2298]

Solo nesita pinsas para cortar metal tornillos para metal y una broca para haser los agugeros en El Piso depende donde bas a ser la pared Madera o Cemento

[@bigbrodens5758]

thank you for your sharing..so amazing..

[@FelipeTorres-gd3gi]

Excelente trabajo 👍🏻

[@xhonixhoni4044]

Super job .

[@kuldude9211]

Thank you. I want to know if it can hold a barn door upto around 25 kg.

[@eileenconnelly8563]

Do you crimp the metal frame and if so then do you need to secure with screws? Thank you

[@dabilethquintero6637]

Exelente trabajo

[@mkfmkf3625]

Thank you so much ❤

[@jorgecastell1848]

Hola Cristian, porqie en agunos casos usaste tornillos, la gran mayoria los remachaste. El sistema es bueno ? Gracias por favor esperare tu respuesta

[@ivanildocoelho5481]

Excelente demonstração ,eu gostaria também fazer quais as ferramentas eu devocomprar. Obrigado

[@mrrsnaconstruction2770]

Very good 😊

[@konradkopiec4193]

Thanks for sharing your tricks how to make job way easier.

[@xlite0060]

Руки золотые у этого мастера

[@mohammadzahed6363]

Good work thanks

[@antoineborg1327]

hi it's good to make the tiles with it for the bathroom? Thankyou.

[@josephharris3529]

nice job well done

[@everymust]

멋지네. 최고다. wow No.1 !!!

[@winlotto54]

Awesome

[@eusebiomamacjr.3025]

@TheMadManofDRYWALL what is the name of the black rubber tape you used?

[@vasiazadov4052]

Просекателем просекать нужно два раза, перегородки собираются с двойным гипсокартоном в два слоя, у стены нужно было ставить профиль тоже.

[@user-ul3hu6os6g]

два слоя, скажешь то же, только зайдёшь куда ни будь где вас местных умников нету и нате вам вы уже здесь, полный писдец, да создайте вы уже свой интернет и сидите там умничайте друг перед другом.

[@sinyandanso9552]

Good job

[@amarildoamarildo7325]

Super, 👍

[@giuseppeterzulli9176]

Sei un grande

[@carlosrodriguezcerro9875]

Como hacer tabiques cuando el techo no es plano y tienes un techo a dos aguas , pq en ningun sitio de youtube veo esa situacion y no es tan rara.Gracias

[@francisconascimento8813]

Top em parabéns...👍👍👍👍

[@tavovalencia]

Hola, cómo se llama el producto, que aplicaste sobre las barras de metal (que va sobre el concreto?) la cinta negra? y cuál es el propósito? Y por que a veces usas tornillos y a veces crimpadora? gracias de antemano.

[@mohammedrazaesmail6934]

what thickness of gypsum board was used? and what was that material you kept in between the gypsum walls

[@eduardodanaojr.7537]

Hi sir what is the name of the tools that you are using to make a hole on the metal studs?Thank you

[@edua72LIBERO]

Ciao molto esaustivo il video che hai fatto, pero comunque devo chiederti una informazione? Se mi permeti, come hai fatto per fissare al pavimento i profili a terra e soffitto, cosa hai utilizzato? Poi se hai un pavimento in marmo e non vorresti rovinarlo (buccandolo) cosa useresti? Grazie.

[@giuseppefaia6496]

Devi usare il nastro biadesivo per attaccare la guida al pavimento se non vuoi bucare

[@saddamsorder3114]

Very easy work,

[@muniramani]

why some parts you used screws and some crimpers to attach the metal stud?

[@alvaroalcaraz9505]

Esta muy bien tu video cuales son las herramientas que utilizas para que puedas hacer una nueva pared

[@kadirkaracga6911]

Merhabalar kolay gelsin. Kullandığınız pense,perçin,yada zımba aletinin ismini bana yazarımız. Ben o aleti yıllar önce Rusya'da görmüştüm. Ama hiç biyerde bulamadım. Nasıl temin edebilirim acaba. teşekkürler

[@rika26202]

Qué tipo de broca utilizas para el piso?

[@ramcasty]

Hi there, just wanna know where can we buy that yellow tool for metal stud puncher? Tnx

[@jasperzro2860]

Good 👍 job

[@DecorHannan]

you are talented

[@marcelogarrido5164]

Excelente genio de contru

[@ingynetcolombia]

Gracias por el video, que broca usas para perforar el suelo y concreto y que tornillo se usa para fijar el riel en sobre concreto?

[@jorgebonetrodriguez3022]

La broca irá a corde al tornillo y taco que vayas a gastar

[@rogeliolopezescobar2298]

Puedes usar cualquiera broca siempre y cuando sea para concreto

[@LuisRichardPazlopez]

Y que tornillo usaste para fijar el riel al concreto

[@vivekr8988]

Very nice super

[@ODINs_80TV]

Was hast Du für eine Crimperzange benutzt?

[@rigobertovalenzuela4446]

Hola muy buen trabajo, una pregunta de que medida es el metal que usas?

[@TheMadManofDRYWALL]

Hola yo suelo usar el de 70mm para tabiques.

[@joelpajuyo2334]

What is the name of the tools that you use for gripping pls.not the revits gun. The orher one.thanks

[@singhgarry2358]

Good helper

[@marklevin79]

Ciao! The screws at the wall are 6 or 8 millimeters diameter? Which lenght?

[@autox7612]

The skeleton look likes its a very thin metal. May i know, is it strong enough?

[@genaropinanezbarreto423]

muito bom show gostei ,so q nos aqui em brasil usamos os montantes cada 60 cmt por que ???

[@TheMadManofDRYWALL]

Muchísimas gracias ☺️ Aquí usamos tanto cada 40cm como cada 60cm depende de lo que pida el arquitecto o dueño de la vivienda.

[@antoniobatres3283]

Sabe instalar pero te falta mucho detalle muy importante por ejemplo nunca se instala la hoja en los dos las lados iguales porque en el futuro hay muchos problemas pared de fuego Siempre aparecen grietas Muchas gracias

[@ShoebKhan-nv1hc]

nice

[@pirateph4799]

Very nice ☺️☺️☺️❤️❤️❤️

[@boris5377]

Nice

[@X_PREDATORsoftairTEAM]

Fantastico wow bellissimo lavoro ❤

[@ubiratanoliveira692]

Poderia comentar ou postar um link de onde adquirir o alicate usado no vídeo, que parece um ponteador!?

[@1971dave]

stud crimping tool, eBay, amazon,,, £15 £20,,

[@pranotostb]

Good

[@remziyesavrun5320]

Aferin 👏

[@sadbuttrue8smylyf263]

Sir what kind of screw you been used in concrete? Thank you

[@jameier11]

Tap con

[@marcharris1976]

What is that tool you’re using?? I need one of those!

[@luissalcedoespinoza4474]

no encuentro que quede bien anclado , que tipo de tornillos es el que utilizan, por favor

[@kermitefrog64]

Thank you for the video. I had a question on the tool that was used for punching a hole into the metal and the contact points. Is that used for a pilot hole for the screws?

[@gavinhay6627]

It's a stud crimper. it joins the 2 pieces together. m.kzbin.info/www/bejne/qX6we3ahq7R4jrs

[@gerdsenior6976]

same question here, what is the name of that TOOL which looks like a Rivetter??

[@gavinhay6627]

@@gerdsenior6976 see my reply above.

[@infin8one]

@@gavinhay6627 Do you care to repost please? I don't see your comment on the tool used to punch out the screw holes.

[@gavinhay6627]

@@infin8one Stud crimper. It punches through and crimps, joining the 2 pieces. No need for screws. kzbin.info/www/bejne/qX6we3ahq7R4jrs

[@beratsoydan7764]

güzel iş çıkardın tebrikler

[@TheMadManofDRYWALL]

Thank you very much ☺️

[@ginger3715]

Chiedo. È possibile fare la stessa cosa pur non avendo esperienza o è complicato ?

[@Lejeuneintermittent]

Salut tres belle realisation Apparemment on a pas le droit de percer les poutrelles mais tu les a percés? Grave ou pas? J'ai la même configuration que toi je peux les percés alors?

[@TheMadManofDRYWALL]

Depende del país porque cada uno tiene sus normas aki se puede taladrar y ten por seguro que no la divilita. Aunque para la pared si vas al bloque es suficiente.

[@laurentg7056]

Salut, en France c'est interdit car s'il y a de nombreux trous il y a un risque d'amorce de fissures. De plus, si au perçage on atteint la ferraille, cette ferraille risque d'être à l'air libre et même minime, ça peut rouiller, donc risque de gonflement de la ferraille dans la poutre en béton, donc éclatement. Une fixation plus sérieuse serait dans le cas de plafond suspendu: l'utilisation d'agrafes spécifiques qui se coincent entre les poutrelles et les hourdis. Pour les cloisons: coller les rails sur les parpaings ou hourdis, ou bien des chevilles à frapper dans les hourdis. Mais voilà, lorsqu'on veut aller vite, faire des économies, il se passe ce que l'on voit sur cette vidéo.

[@vicentemartinlechugajimene2867]

vigas reticuladas. ¿Como obtienen las medidas. que cargan soportan. tienes una tabla que relaciones longitud, ancho, carga, tipo de perfil o parante?

[@joachim4811]

Super 👍👏👌💪🤗🕊️❤️🕊️✋🤠

[@edinsonvargastordecilla3513]

Buenas noches parsero q pena con usted me puede decir como concigo esa pinta en Amazon gracias

[@killuaHunter]

at 4:32 leave room for the dry wall ti fit.or about 1.5-2 cm

[@carlolongobardo5680]

Mi permetto di dare dei piccoli consigli : Il taglio finale della lastra di cartongesso dopo spezzato sarebbe meglio effettuarla dall'interno. Poi la guida applicata sulla parete dove c'è la roccia non si comprende come è stata fissata. IO avrei avvitato una striscia di cartongesso dietro la guida ed usato della colla specifica per consolidarla al muro di pietre e quando trascorso il tempo di essiccazione per essere consolidata l'avrei tassellata. Comunque ottima lavoro ;-)

[@foodelity6091]

Double layer boards or single?

[@fitnessbuddytv6530]

What tool you used bro

[@r.c.850]

I never knew you can use the stud crimping tool for that.... so witch is better crimping the metal or a put an screw ?

[@timclark3914]

Screw the bottom and punch the top to allow movement.

[@lawrencemaitland]

Do you need to use plugs for the screws??

[@mdb1j4z17]

Yes

[@romainjeanjude7696]

comment appel cet matériel en forme de pince que vous utilisez ?

[@MrZachiled2000]

請問那把鉗子叫什麼名字呢？哪裡買得到？（那兩片金屬固定在一起的那把鉗子）謝謝

[@user-de8qh8lm5k]

Cual seria el precio aproximado para hacer esta habitacion ?

[@tonyjamel5229]

What did you use to fix the stud to the top plate?

[@1Swahealy1]

Exactly what I was thinking I shoot the track to the ceiling and floor with a proper nailgun. It looks like he's just put drywall screws into concrete a big no no. Awful workmanship tbh

[@zbyszekkowalski6173]

Na stykach narożnikowych profile powinny mieć odstęp na grubość plyty

[@giovannyleyton5247]

Muy bonito te felicito. Pero las laminas no se instalan de esa manera, con el tiempo son los problemas con las grietas. También otro detalle importante. Cuando se forra se tama en cuenta que arriba del buque no queden pegas que la lámina que se instala que cubra las partes de arriba del cargador. Muy si caballero gracias por tu video y te insto a que sigas adelante.👌

[@agusm20856]

What is the name of that puncher locker?

[@thomaswiemann9459]

nice safety shoes

[@mollylovly12]

Mantap bosqu

[@celsoruizdiaz]

Capo maestro

[@condeperez1925]

Como se llama la pinza que usas para unir los parantes con los perfiles solera?

[@wbaldoramirez1512]

Se llama en ingles stud criper en ingles localicela bajo ese nombre en youtube no se en español

[@user-td5ob7yu9p]

Два основных недостатка в этой стене. 1) пространство между стен не заполнено звукоизоляцией. Например минераловатной. 2) нужно с перехлестом класть поверху ещё по одному листу гипса с каждой стороны. Для прочности и звукоизоляциии.

[@VadimKirilchuk]

Ещё виброразвязки нет, профили к полу и потолку надо через сшитый ппэ или вибростек.

[@user-td5ob7yu9p]

@@VadimKirilchuk я вроде видел, на один профиль приклеивал.

[@GGG-rx7df]

так это же армяшка в жопе деревяшка делал,что вы от армянойда хотите?

[@user-td5ob7yu9p]

андрюша...тебя в детстве Армяне обижали? Савочек не давали, куличики разбивали? Сходи к психологу.

[@vanyabestman6008]

Хх еще на потолке вроде как в блок не присверливаются.. (ну в наших краях)

[@leobardobarcenas5281]

Cual es la funcion de esas pinsas

[@decor684]

Tooop

[@akub4046]

Can anyone tell me what material he put inside wall?..fiber?

[@corradomagrimoreno9758]

Las láminas siempre se deben colocar por la acostadas por cuestión de resistencia y trabadas para que trabajen como debe ser, los parantes por esa altura deben ir a 61 cm porque de la forma y distancia que los coloca está gastando material de forma innecesaria

[@jeffreyloftus3617]

Why do the concrete blocks at 4-27 appear to be not sitting on the concrete beam

[@mrt8694]

Because they are L shaped

[@user-cat299]

какой профиль использовали подробно можно?

[@JoseGarcia-jn8xy]

Qué tal funciona esa erramienta para unir los metales ?

[@TheMadManofDRYWALL]

Para trasdosados y tabiques interiores es perfecta. En techos no la uso prefiero usar tornillos.

[@adissss4466]

A gdzie Pianka przyklejona do profili?

[@enviosinterdimencionales8612]

you must be a proud dad.