CANT ADJUST YOUR CARB? IN MOST CASES YES YOU CAN!!

[@rodneyerdmann1545]

Thanks to the EPA for that one! Great tip on removing that plug!!!

[@KensSmallEngineRepair]

Good info Jeremy. They try to outsmart us but we figure it out!!!

[@thomasunderwood6933]

Learn something new. Never knew there was any adjustments on those type of carburetors. Thanks for the info. Will make my work lot easier.

[@MartinCurtis-y9h]

Thank you, despite reading my tillers manual it didn't describe any of this, after watching your video I had my machine running perfectly, previously the engine just died as soon as I turned the revs up.

[@motoman5023]

Thanks for the drill bit tip we are always pissed at those carbs when the special tool won't get it out

[@marknye51.thefixitguy]

Great video...thanks

[@hotajax]

Hope you don't mind my French, but GREAT FUCKIN' JOB!!!! All the detail you'd ever want. Thanks a lot.

[@applehead252]

Much easier than I’ve seen others doing! Awesome!!!

[@mayapadilla3858]

You are one bad man your info is really awesome

[@thisisyourcaptainspeaking2259]

Great idea, thanks for sharing!

[@tamipen9819]

I don't have Much to say, about what I know I must say is a big big thank you for showing me those hidden screws 👍🏾

[@MrRippinonyou]

Thankyou bro best bit of info ever !

[@harryberry474]

This looks like the best way to remove those plugs Thank You for showing!

[@jukeman57]

Your tip using the drill bit work flawlessly. Very easy. I do recommend taking the carb off and to remove the primer pump. It’s just easier to manage and you are less likely to melt any plastic parts. Thanks man.

[@adnacraigo6590]

Interesting that you and donyboy both covered these hidden adjustment screws the same day. I would not have known about these otherwise. I don't think he mentioned Walbro though.

[@danoakley6538]

Yup I saw Sony boy's video earlier. He had a special tool but mower medic showed us another way if you don't have a tool.

[@philliphall5198]

It’s great news

[@wallyallyn5473]

Thank you my friend I have a couple carburetors that I need to do that with very informative

[@nashguy207]

This must be carburetor adjust class Friday Your the 2nd channel I have seen a video about this today!!

[@harryberry474]

My 20+ year old SM2100 had 2 adjustment screws the were marked as such color coded too and easily reached at the top of carb, change is not always for the better.

[@randi740]

Great job my man!

[@hphillips7425]

Good information. Now I have to figure out what carb my FS 55 stihl has. This video will probably take a trip to the garage with me. Thanks

[@RaleysSmallEngines]

Great job as always

[@philliphall5198]

Merry Christmas from West Texas

[@chrisyerp174]

This was golden thank you

[@ncrdisabled]

Donny boy had this tip earler .

[@juangil-xq9ng]

MUY BUEN VIDEO...ME ESTAN AYUDANDO MUCHO....APRECIO MUCHO MAS SU AYUDA....GRACIAS

[@DCS026]

Excellent tip

[@monkeydoctorofthelostworld7468]

I do basically the same thing, but I use a precision screw driver, but I like the drill bit trick better, so I'll try that the next time one of these honery little buggers comes in. Thanks for the tip!

[@timidater4803]

I used the extractor that came in my cheap hipa carb adjustment tool kit, but if they strip out your method does work!

[@crabshack122]

Great tip. Thanks

[@stevennowak7081]

AWESOME

[@johnmckeron3663]

Great info 😊

[@finis.conner]

Hi! I think that could be good idea to use a very small heated threading tool to extract the plastic, because can take the plastic better due to the teeth. Sorry for my english! I have a very cheap walbro and cant fix it. That's because I found your video. Kind Regards.

[@dclawnmaintenanceandsnowre4099]

Donny-boy posted the same thing this morning

[@THEMOWERMEDIC1]

No, my video is totally different.

[@dclawnmaintenanceandsnowre4099]

@@THEMOWERMEDIC1 what was different

[@THEMOWERMEDIC1]

🙄

[@sundial6919]

@@dclawnmaintenanceandsnowre4099 the good tech Dony boy used a specialty tool from Stihl to remove the plugs , so Mower Medic offers a quicker solution if you have a torch and drill bit close at hand , especially if only 1 time thing but for less handy folks the Stihl tool is easier even tho expense and trouble chasing it down .

[@THEMOWERMEDIC1]

@@sundial6919 I have the stihl tool but it ever works right

[@LostMountainRestoration]

Nice, thanks.

[@mattaitchey4917]

you do not need to get it red hot. hits it with the blowtorch until its white lol.. love it

[@miguelayalajimenez8721]

Gracias desde PR

[@kevinhaley6776]

I use a small drill bit and a small wood screw

[@richardshook8645]

Thanks, great info!

[@Photostudioww]

2020 srm 225 i already had to change the carb and spark plug. Bought a Stihl fs56 to see what its about and its not comfortable like the 225. Next season im getting another spark plug carb 😂.

[@eddiereyna1155]

Thanks hombre

[@THEMOWERMEDIC1]

mouy welcome vato

[@Kevinrichardsonministries]

Big Ol' Fat Thumbs Up Bud... !! Amazing Tip...

[@akesvensson509]

Thanks!

[@Elon_Trump]

Awesome thanks

[@edgell3]

Thank. You👍

[@josh33025]

The more you know⭐⭐⭐

[@twobeer3316]

If you don't have heat don't worry, I was able to drill into the plastic plug and pull it out.

[@clintstevenson1214]

do those style of carbs for 4 stroke engines have 2 adjustments as well? like for husqvarna weed eaters. Thanks! Great video

[@chrisyerp174]

mine did ss470 bc509 CUB CADET did both are 4 stroke

[@mgomez5606]

TY for tip MM1.

[@gilpicard6024]

AWSOME

[@Doc-Cole_Trickle-of-Chainsaws]

Hello MM1, On some of the older Stihl equipment they used a carburetor with one adjustment screw. What is your thoughts on this style carburetor and have you had any trouble adjusting them? Thank You 4 the info and entertainment!

[@heathwilson2572]

The mower medic 1 what do you think about Walbro carburetor all my Echo equipment have Walbro carburetor and one echo have Zama carburetor

[@THEMOWERMEDIC1]

Borh good

[@BRWfilms]

I cant get my wall bero style carb to return properly anymore Do you have a vid showing assembly of that side (low speed side) where the flap and spring connect plate sits on top of that then the throttle cable connects to piece on top of that. If this makes any sense

[@moc6897]

... that's the way ...

[@bowhunter10167]

Sweet

[@crazyhorseracing6130]

How are you suppose to adjust them off the engine?? Once installed you won't be able to get to those screws... Just curious??? Thanks for the videos!!

[@THEMOWERMEDIC1]

Sure u can

[@crazyhorseracing6130]

@@THEMOWERMEDIC1 Good to know!! Thanks again 😀

[@nancysmith9487]

Thumbs up

[@LoudByNature02]

God

[@loborobertson7212]

👍👍

[@markcaldwell3978]

Sell me that junk MS362 you scrapped in the last video.

[@doglegjake6788]

i wonder how al gore adjust his carburetors ?

[@downeastoutdoors8713]

Damn 69 thumbs up… good deal

[@budgillett9627]

👍👍👍👍👍👍👍👍👍👍👍👍👍

[@youknowme8693]

yall lame af telling all tricks for small engines code between techs.