2013-2018 Nissan Altima Valve Cover Gasket Replacement [2.5L QR25DE]

[@zaldyc5047]

Did this back in August when i noticed oil in one of my cylinders. I followed the instructions just as you explained and it went smoothly with no hiccups. I appreciate your detailed videos a ton. Keep up the Great work!

[@TheOriginalBeeCee]

Thanks for the comment man! Glad it went smoothly 👍👍

[@saludparatodos1837]

@@TheOriginalBeeCee The best, best, best video I have ever seen, thank you very much for your explanation

[@westsammvan]

Just followed your video to make this repair on my kid's Altima saving him (and me) around $500. There's more work to do on this thing so keep these great videos coming!

[@TheOriginalBeeCee]

Great to hear! Appreciate the comment!!

[@sc5015]

Man that is one seriously clean engine for over 200k!! I'd be ok with dropping my lunch sammy on it and still eat it! People do not understand how regular oil changes and air filter changes are for engine health. I change the oil in my 2.5 every 3k (conventional) and air filter every 6 months ( about 9 to 12k miles). Just FYI on valve covers - There is a very common issue with aftermarket valve covers for the 2.5l, they don't seal well, and some have clearance issues where valvetrain components will actually contact the plastic inner shield of the valve cover. Only use OEM Nissan valve covers! If your valve cover is not sealing well the 2.5 will begin to ingest oil. That begins to foul plugs, contaminate/stick piston rings with burnt oil sludge, and also pollute the catalytic converter causing emission issues. How do you know if your losing oil? Check the dipstick a few times between oil changes. Oil consumption is not normal for the 2.5, I dont care what you read. If the 2.5 is drinking any oil there is a problem with the PCV, valve cover, or the engine (but rarely). Look for leaks around the cover occasionally and if you see oil, deal with it right away. Pull the PCV hose and if it is dripping oil, you have a valve cover leak. If your 2.5 is drinking oil and its not obvious, pull the spark coils and see if the wells have oil in them, thats a typical failure point. Oil consumption will lead to a damaged engine or emission system. If you have a valve cover oil leak, deal with it right away and only use OEM valve covers. Gret video!

[@TheOriginalBeeCee]

Definitely agree man! Thats exactly why I went with the OE Nissan Cover. And I agree, these 2.5s really aren’t oil burners like their bigger VQ brother.

[@nvicente79]

Great tutorial and we appreciate you helping the community. Your instructions are so simple to follow. Thank you 🙏🏼

[@TheOriginalBeeCee]

Thank you man, definitely appreciate your comment and support 🙏🙏

[@jeremydickert2607]

Was debating whether to do this myself. After watching your video, i definitely am now. Top notch video. Thanks.

[@TheOriginalBeeCee]

Awesome glad to hear. Appreciate the comment! Good luck on the job 🤙🤙

[@glenndallinger4596]

Love the Altima content... I decided to remove the "beauty cover" after noticing that the '23 Altima does not come with one. Now that it's off, I need to take a close look to see if the valve cover is leaking at all. I have a 2016 with 76,000 miles so I think I'm good for now.... also glad to find out where the PCV hose and valve is in case it needs to be replaced. thanks again for all of these Altima videos!

[@TheOriginalBeeCee]

Hey Glenn! Appreciate the comment! I would think your VCG is probably A-ok considering this 2014 lasted until 200K. But never hurts to check! But i always try to have the camera ready anytime I have to do some work on the Altima 👍

[@SM-un7ob]

Did this 4 days ago. Everything went just as you explained. Great help.

[@TheOriginalBeeCee]

Awesome glad to hear!!

[@matthewmyers4900]

1st off, THANKS! This video gave me the confidence to tackle this job. was able to do the job in about 2-3hours. Love how thorough you are. Just earned a sub! Keep up the great work!

[@TheOriginalBeeCee]

Thanks for the comment! I appreciate it! Glad you were able to get it done!

[@brianpeters8917]

Got bored and decided to watch a “how-to” video and I have to say you could teach auto repair to a 5 y/o excellent work.

[@TheOriginalBeeCee]

Lol I appreciate it man! Thank you 🙏

[@123renfroe52]

Very easy to follow your instructions! Great video!

[@TheOriginalBeeCee]

Appreciate the comment 🙏

[@jesuscontreras1200]

Best replacement video I’ve seen so helpful and thorough!

[@TheOriginalBeeCee]

Thank you! I appreciate the comment!!

[@davidshirley7439]

Great video. Well laid out and gave me confidence to get it done. Appreciate you helping us all.

[@TheOriginalBeeCee]

Awesome! Thank you for the comment 🙏🙏

[@Radlife26]

Thank you for this video. I changed out my motor mount at the same time. I didn’t end up snapping one of my valve cover bolts lol, but I will be drilling it out tomorrow.

[@TheOriginalBeeCee]

Ahh that sucks. Good luck with the drill out 👍👍

[@TheGaryNinja]

Great video again! Love how detailed it is. Just wondering if you have any tutorials on replacing the 2 thermostats on this car. I have a 2013 and looking to do it myself. Thanks again for sharing your knowledge! Your car is very clean for 205k!

[@TheOriginalBeeCee]

Thanks man..I definitely appreciate it! 🙏 But no, i do not currently. I just do jobs on this car as issues arise, of course. So if it ever comes up on this car, or if someone brings me another Altima with the issue, I would definitely be happy to do a video on it!

[@TheGaryNinja]

@@TheOriginalBeeCee Nice! Does that mean your thermostats have lasted 205k? I probably wouldn't have to change mine this early if that's the case :)

[@TheOriginalBeeCee]

@@TheGaryNinja yessir still original at 205K! For something like that, I would say if it ain’t broke, don’t fix it!

[@Rmata1993]

Im interested in knowing where that 2nd thermostat is located. I see the one right on top, but not the other.

[@angelarobey8904]

Thank you so much!!! By watching your video, I was able to do it by myself😃 on my 2014 Nissan Altima save over 1k in cost. I ordered parts from Amazon since I was changing the gasket I went ahead and changed spark plugs and coils too.

[@TheOriginalBeeCee]

Awesome! Glad to hear! I appreciate the comment!

[@kimjohn2k6]

Hey brother great video my only problem bolt 3 & 7 snapped 😢 any tips to remove and where to find replacements🤦🏻‍♂️

[@TheOriginalBeeCee]

Sorry to hear man. Do some research on tap & die sets. Thats what you need to drill out the old and re-thread for the new bolts. Not fun but doable with some time & patience!

[@123renfroe52]

Great instructional video! Great job also!

[@TheOriginalBeeCee]

Appreciate it! Thank you for the comment!

[@tedmayes679]

Thanks for your detailed video, saved me a bundle. Great instructions. You are very appreciated.

[@TheOriginalBeeCee]

Thanks for the comment! I appreciate it!

[@carsonlundeen1533]

Ive gotta do this whole process tomorrow... wish me luck

[@TheOriginalBeeCee]

@@carsonlundeen1533 good luck let me know how it goes!

[@carsonlundeen1533]

@@TheOriginalBeeCee Parts got delayed by a couple weeks but I'll comment when i do! Thanks again for all the helpful information. After watching you I feel a hell of a lot more confident.

[@TheOriginalBeeCee]

Great to hear! 🙏 and definitely, let me know!

[@eltobas1]

Great video, but I didn’t realize you were saying inches per pound for torque specs and not feet per pound. I ended up breaking a bolt off, and spent some time extracting it. Lesson learned, but I still saved plenty of money, just lost time.

[@TheOriginalBeeCee]

Sorry to hear man. Thats why I not only say the torque spec, but also include it in text….as you can see in 37:59. Gotta pay attention to those small details! Lol. Glad to hear you got it extracted though 👍

[@albertojhernandez169]

Great video. I'm doing this plus the motor mount Monday. Thanks

[@TheOriginalBeeCee]

Nice, good luck with the job! Appreciate the comment

[@venkatgudipoovu3132]

I just finished, thanks for your help.🙏🙏🙏

[@TheOriginalBeeCee]

Awesome, good to hear🙏🙏🙏

[@johnm7556]

Thanks for the caliper slide pin info!!

[@TheOriginalBeeCee]

No problem 👍👍

[@fernandoduarte9584]

Thanks for video, but where did u get the cover gasket ?

[@TheOriginalBeeCee]

www.coulterpartscenter.com/?gad_source=1&gclid=CjwKCAjwhIS0BhBqEiwADAUhc7p-xYsrlDgB8zvGIIbzvuBnG-en5JByUcaM-N9lvkvh5BLALyB9hBoCDhIQAvD_BwE

[@RalphZenitram]

There is a Nissan bulletin related to the orange color PCV valve, I have replaced mine as my fuel consumption was too high, Nissan recommend replacing it. Nissan Bulletin 11810-6N202 Defective PN 11810-1KC0A New Nissan PN is 11810-EA200

[@TheOriginalBeeCee]

Awesome info! Thanks for sharing 👍👍

[@cristianmayorga7735]

Should the negative battery terminal be taking off or this could be done with the battery on?

[@TheOriginalBeeCee]

you can do it with it still on

[@israeliracheta9725]

Hey what kind of Mobil1 oil did they use on that 2.5, it looks awesome.

[@TheOriginalBeeCee]

Appreciate it! Maintained by yours truly since day 1 with Mobil 1 synthetic 0w-20: www.walmart.com/ip/Mobil-1-Advanced-Fuel-Economy-Full-Synthetic-Motor-Oil-0W-20-5-Quart/17034374?wmlspartner=wlpa&selectedSellerId=0&wl13=1742&gclsrc=aw.ds&adid=2222222227817034374_117755028669_12420145346&wl0=&wl1=g&wl2=m&wl3=501107745824&wl4=pla-394283752452&wl5=9053084&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=local&wl12=17034374&veh=sem_LIA&gclsrc=aw.ds&gad_source=1&gbraid=0AAAAADmfBIo1NvdwXDUgqqcL0ZpQwvQIC&gclid=CjwKCAjwxY-3BhAuEiwAu7Y6syQjVscNqpiclHqzhIjWMOA1JAY6iulrKGCQMJ7cV055IqWQa23OGRoCNsgQAvD_BwE ….not just the oil, but it being changed religiously every 5k on the money yielded that outcome as well. Always done on time, never missed a change 🤙

[@israeliracheta9725]

Thanks a lot man, I love your videos. I have done all my own work following your how to’s.

[@TheOriginalBeeCee]

Awesome man glad to hear 🙏

[@josephvera277]

Awesome video! What torque wrench are you using for those 36,37 and 70 increments?

[@TheOriginalBeeCee]

Any inch pound torque spec outlined in the video I utilized a 3/8 inch pound torque wrench….& any foot pound torque spec outlined in the video I utilized a 1/2 foot pound torque wrench.

[@mack606]

Buddy you earned yourself a new subscriber damn fine job damn fine job

[@TheOriginalBeeCee]

Appreciate it man! 🙏🙏

[@altonjones7696]

Great Video, I am definitely not a mechanic. but your video gave me the confidence to tackle this job. Not as easy as you make it look. Question - just out of curiosity did you wait 24 hrs before driving? My permatax sealant said to wait 24hrs before driving? Just wanted to know if it is safe to drive before 24hrs.

[@TheOriginalBeeCee]

I appreciate the comment! I used & pretty much always use Permatex The Right Stuff for most applications, and it’s supposedly good after 90 minutes. Ive had vehicles driven a few hours after on various applications and be fine, but typically i do like to wait a day if I can.

[@TheHobbyistChannel]

These valve covers are MIA for OEM these days. I blame your great video 😂😂😂.

[@TheOriginalBeeCee]

😂😂

[@TheHobbyistChannel]

Jk aside, appreciate the thorough vid, trying to keep mine going to 200k at 116 and have to change the valve cover and strut mount (upper) and both you covered great. Going to go with aftermarket, dealership had back order for 3 months. Next do front struts/shocks !!

[@TheOriginalBeeCee]

🙏🙏🙏🙏

[@bilalalsorchy5058]

Hi man thanks for fhis hard jab nice and clean ? I have nisan sentra 2019 . I was opened one plug spark befor and see some oil in and i get it back so right now i decided reslove this problem so what i do change valve cover gasket and rocker cover bring new one and spark plug tube seals i don't know what i buy valve cover or rocker cover or plug tube seals ?? i think it is different on altima if you know about that advise me pls

[@TheOriginalBeeCee]

Just plug in your year/model in @ www.coulterpartscenter.com …and search accordingly and you will find anything you need.

[@bilalalsorchy5058]

@@TheOriginalBeeCee i open this site it is good every thing is there i put model and a year and i put i space search . Valve cover gasket if buy this reslove oil leaking on spark plug ! Or need another thing to buy ??

[@bilalalsorchy5058]

@@TheOriginalBeeCee if you search for valve cover gasket for sentra and altima is loock diferent in altima just framework in sentra have in medal circles you think this stop leak on plug or need change seals tube too?

[@fareedahmed9199]

Excellent video dude! Thank you for step by step guidance. Could you please share the parts links if you got it online. I have a 15 Altima 2.5 S that has 160k miles. I do see oil building up on my valve cover so it probably needs to be changed. I hope I do a clean job like you did!

[@TheOriginalBeeCee]

I appreciate the comment man! Thank you 🙏 but I usually buy all my OEM Nissan parts from: Www.coulterpartscenter.com

[@agimqerimi2564]

Yesterday I put new spark plugs on my Nissan Altima 2016 and after the mechanic started taking out the old one the second one on passenger side he noticed some oils around old spark plugs other three on dry condition he recommended it to replace the valve cover do u think I should be doing this to prevent eny misfire in the near future what's your opinion reply to me please

[@TheOriginalBeeCee]

Yes you definitely want to replace the valve cover/gasket sooner than later

[@rickymarlley6570]

My guy I found oil inside my tube do I need to change it or just clean it

[@TheOriginalBeeCee]

Definitely need to change it man. Cleaning it will only probably help for few trips then it will be right back to being filled with oil.

[@melvinsmith3020]

Do you clean the oil out of the spark plug area if oil got in side it

[@TheOriginalBeeCee]

Yeaaa most definitely want to clean out as much possible. Take some rolled up paper towels and try to get it all out

[@PeterNiu]

Watched for 30 mts and pause, hit like button🎉 let me brush teeth first

[@TheOriginalBeeCee]

Brush emmmm

[@adams6798]

Great video and great explanations however your torques were not is spec. Once you put an extension on a torque wrench the specs change based on the length of a extension. Basically the torque is reduced. We use a certain formula for that adjustment.

[@TheOriginalBeeCee]

agradetools.com/torque-wrench-myth-busted/

[@TheOriginalBeeCee]

kzbin.info/www/bejne/qoO1aml_gayCiLc More proof that its an irrelevant myth. ✌️

[@lucianogallo5918]

How you got this engine so clean?

[@TheOriginalBeeCee]

Lol i detail 😉

[@carljenkins5092]

Wonder if it’s the same CVT after 200 k. Mine has around 70on it. All your videos are very informative. Thanks for posting it.

[@TheOriginalBeeCee]

I appreciate the comment man! But yessir original 2014 CVT currently sitting @ 206K!

[@sc5015]

You should have the CVT serviced every 60k, BeeCee Built has a great video on it - kzbin.info/www/bejne/kH_FeGOtiZaeeJI If you dont trust yourself, have it done at a Nissan dealer. It costs about $199.99 and you are guaranteed they will use Nissan OEM CVT fluid. I trust a local quick oil change place Ive been going to for 20 years now, but I would NEVER allow them to touch the CVT. Even buying the fluid aftermarket will cost some 80 to 100, so the dealer only gets 100 which is fair for the labor and disposal.

[@TheOriginalBeeCee]

@@sc5015 my man, that is me..and my video 😂

[@sc5015]

@@TheOriginalBeeCee oh I know, and probably the best video on KZbin on how to get it done. Seriously.

[@TheOriginalBeeCee]

@@sc5015 I definitely appreciate that man!

[@MilkHoney-i8w]

If I get a little debris in under gasket area will I have to get it oil change?

[@TheOriginalBeeCee]

Not quite sure what you’re asking here. Like you literally got debris under the gasket itself? Because if that’s the case, then its not gonna seal correctly. Or did you get debris in the head itself because it was opened & exposed from cover being off?

[@MilkHoney-i8w]

@@TheOriginalBeeCee debris in head from cover being off. Very small amount and the debris is tiny specs.

[@TheOriginalBeeCee]

@@MilkHoney-i8w personally i would try to get out as much as possible manually by wiping it out by hand with a microfiber/shop towel. Take your time and do as much as possible. If it’s a decent amount and you cant get to it all….i would pour a few quarts of oil in the head, with drain-plug open…and basically rinse/flush all of it out…and let it run out immediately. IMO tho there shouldn’t be a lot…and it should be manageable by wiping up and cleaning out by hand. Usually if i get any small amount of debris in head when doing a cover its accessible and easily removable by hand.

[@MilkHoney-i8w]

@@TheOriginalBeeCee I put the cover on yesterday. I know it’s not much or any. But I’m just being paranoid. Do you know what type of oil to use? Really appreciate your help

[@TheOriginalBeeCee]

I prefer 0w-20 mobil 1 personally!

[@MilkHoney-i8w]

What brake cleaner did you use?

[@TheOriginalBeeCee]

I just use any cheap brake cleaner i can get my hands on. Typically Walmart brand. Doesn’t matter, all works.

[@seps26dave]

What is the cost for a job like this found oil in one of the holes after i removed one of my coils. Have a bad back at the moment so i cant do much rn

[@TheOriginalBeeCee]

Hard to say, I’m sure you’ll find a variety of prices. I would probably say roughly $500 though at a shop

[@rigo5454]

where did you get hose instructions from (3:05) was it alldata

[@TheOriginalBeeCee]

From Nissan’s FSM

[@melvinsmith3020]

So I got my valve cover today but it didn’t come with the orange rings but it’s not a ome valve cover also does that matter or do I gotta wait another week for a new valve cover

[@TheOriginalBeeCee]

As long as the cover has the spark plug grommets built into it and you have a VCG you will be fine. Should have PCV built in as well, if not you’re going to have to transfer the old one over.

[@melvinsmith3020]

@@TheOriginalBeeCee thanks 🙏🏽

[@TheOriginalBeeCee]

@@melvinsmith3020 🙏🙏

[@cannybuildit8794]

Do you have a link to where you ordered your new valve cover?

[@TheOriginalBeeCee]

I purchased it from www.coulterpartscenter.com/?gclid=Cj0KCQiAtaOtBhCwARIsAN_x-3LXihyTNoKo3AjEXd1x6TvVNOLQ2UKMesYH0aWr8ZfxZpfXa3WWKB8aAreCEALw_wcB

[@FunnyRandomz4U]

What should I do if there is oil in the cylinders?

[@TheOriginalBeeCee]

You want to get out as much possible, but you don’t have to kill yourself doing it. Roll shop towels up into roughly the size of the cylinder holes and dab them in there. Once you have all you can get out from dabbing, put a new clean one rolled up in and spin it around in there with some pressure. After that, if you have air or an air compressor can, you can put air straw in cylinder with a shop towel around it, and blow out anything remaining. Then you can pull plug. I would replace the spark plugs while you’re already in there as well, as they will need it from the oil exposure.

[@devinmoore9877]

Just found oil in all four cylinders when going to change plugs suggest value cover replacement for 13 Nissan Altima 2.5sl ?

[@TheOriginalBeeCee]

Yupp need new valve cover.

[@devinmoore9877]

Okay gotcha going to look into the parts now see

[@TheOriginalBeeCee]

Check out: www.coulterpartscenter.com/?gad_source=1&gclid=Cj0KCQiAxOauBhCaARIsAEbUSQQVIWYAvKaL_0kVhbwbX8C_V08X6dCG5LdPzsYqvia6zBZmSS_OCIcaAqvQEALw_wcB …search by vin

[@foxbodystang8587]

Would the valve cover from an American built rogue to a korean assembled rogue be any different?

[@TheOriginalBeeCee]

First off, love your name lol. I recently picked up an ‘87 t-top, introduction video to the build is on the channel if you’re interested! But valve covers should be the same man! You can always verify with Rockauto as well by searching year/make/model!

[@foxbodystang8587]

@@TheOriginalBeeCee Thanks man, I'll check out that fox video. Unfortunately, due to strick California emission laws I had to sell my Fox.

[@TheOriginalBeeCee]

Damn man, sorry to hear. Cali is so OD. Beautiful state, thee WORST laws.

[@mack606]

Do you have a video on the infamous power steering noise when you turn the wheel left or right and it goes away when the wheel is straight they say this is normal but I don’t believe so

[@TheOriginalBeeCee]

Surprisingly it actually is normal. As long we aren’t talking about some crazy whining..that would more than likely be from low fluid. The power steering in the cars is electric. So what you’re hearing is actually the “zinging” from the electric motor. This car was purchased brand new in 2014 by my GF, and it made that noise since the day she brought it home.

[@mack606]

@@TheOriginalBeeCee I never heard it until a few weeks ago. I did a power steering flush and replaced it with the proper fluid and level is on point and that’s when I noticed the sound that everyone is talking about and says that is normal I’m thinking it might be air in the line somewhere

[@TheOriginalBeeCee]

Ahh got ya. Maybe you do have a slight whine or something then. If it only appeared after you messed with the fluid, then i would tend to agree with you and think there might be possibly air in system. I would double check fluid level…if level is good….take PS Res. Cap off, and turn the wheel slowly all the way one way & let it sit for 3 seconds, then turn it the other way and let it sit for 3 seconds, and keep repeating that. It should help bump out any air in the system and help “bleed” it.

[@mack606]

@@TheOriginalBeeCee yes i was going to bleed the system again this weekend because the fluid definitely needed changing with fresh fluid a lot of ppl say including you that they heard the same sound the day of purchasing a Nissan and others didn’t hear it until later on down the line but I definitely have that infamous sound y’all talk about. But I appreciate the feedback and I’m a new subscriber if you have a detailed video of a water pump replacement on this vehicle I definitely would like to review the steps for future reference. Thanks for your help

[@TheOriginalBeeCee]

No doubt man. Good luck with it 👍 as far as water pump, I haven’t done one on these cars yet. I only do jobs as they arise or if I have someone bring me the specific job. But if i ever have the opportunity too ill definitely be making a video for it!

[@gustavoportillo8755]

How do you locate the Service repair manuals and torque specs? I tried google for the pdf version but they charge on some websites.

[@TheOriginalBeeCee]

Check out www.nicoclub.com

[@gustavoportillo8755]

@@TheOriginalBeeCee Do you by any chance remember the topic or title in that forum ? I'm looking for the Rocker Cover removal/ Engine gasket cover/ etc.. to look up the torque specs

[@carlosmaravilla1662]

Can I use a wire brush to clean it around it?

[@TheOriginalBeeCee]

You can….just do not use a hard aggressive one. Use a soft one in moderation carefully

[@JavierGaray-v1x]

Need a engine cover like this. Where can I order it ?

[@TheOriginalBeeCee]

I got this one from coulterpartscenter.com

[@morphodox3594]

do i need to change the oil after replacing the valve cover

[@TheOriginalBeeCee]

No, doing an oil change isnt a must. But if you happened to get debris in there somehow while doing the job…then yes i would do it!

[@BuddahGamess]

Not sure if I’ll get an answer but I’ll try anyways lol what website do you use to order your OEM Nissan Parts?

[@TheOriginalBeeCee]

Coulterpartscenter.com

[@BuddahGamess]

@@TheOriginalBeeCee awesome thank you! Love the videos and how clear and in depth they are!

[@TheOriginalBeeCee]

@@BuddahGamess thanks man! I appreciate the comment 🙏🙏🙏

[@eduardoguerrero7969]

Very.. very good video, thank you!! 👍👍🙏🙏

[@TheOriginalBeeCee]

🙏🙏🙏 appreciate the comment!

[@andreaparedes-yb5ms]

Good video. Very specific

[@TheOriginalBeeCee]

Thank you! Appreciate your comment 👍

[@TGODxRaid]

Thank you!

[@TheOriginalBeeCee]

🙏🙏🙏

[@Hydroner]

Good job on the video. Very informative! Tackling this in the morning.

[@TheOriginalBeeCee]

Awesome! Glad it helped. Hopefully job went smoothly.

[@dzone67]

Do you happen to know the torque specs for the engine mount in the bottom itself? Need to change that and this is the closest tutorial to that 😓

[@TheOriginalBeeCee]

Yesssir the 3 mounting bolts are all 30 Ft. LBS.

[@dzone67]

@@TheOriginalBeeCee Thank you!

[@TheOriginalBeeCee]

@@dzone67 🙏🙏

[@fist82]

Hey what's that rubber part called at 5:48? My car was making noises idling and I checked to see what it was and that rubber part is cracked and separated from the bolt.

[@fist82]

Never mind I just heard you say the name lol. They are out of stock of that part at Rock Auto. Do you know where else I can buy it?

[@TheOriginalBeeCee]

@@fist82 you can get them at any local parts store, Autozone, advance, etc. but looks to me like rockauto has all options in stock, i would say get the Anchor mount: www.rockauto.com/en/catalog/nissan,2014,altima,2.5l+l4,3305930,engine,torque+strut+mount,5556

[@fist82]

@@TheOriginalBeeCee I have the 2016 model and the part is all black and they are out of stock on that one. Will the Anchor one work as well, I am paranoid that if I did all that work taking that stuff off and it doesn't fit lmao

[@TheOriginalBeeCee]

@@fist82 lol yea they do have that black style one. I’m not 100 percent, but really the 13-15 & the 16-18 are all the same shit. And they still have the 9444 Anchor mount listed for the 2016, which is the same part # for the 2014. So they still have that mount as applicable to your car…they just also have the black style ones in addition listed for your year as well (the out of stock ones). Just from experience and considering Rockauto lists the 9444 for the 2016, I see no reason why it wouldn’t work in my opinion.

[@jeffreycloonan8539]

Yes I have a 17 Altima bought from a rental car company took to dealer to have a transmission service done at 68000 miles problem I'm having is that if the temperature is 25 or less car has to warm up for 20 minutes if not car just revs up and slips summer time it's fine can't figure it out

[@TheOriginalBeeCee]

That’s a new one on me man. But out of curiosity, were you having this problem prior to the dealer transmission service @ 68k, or just after?

[@jeffreycloonan8539]

@@TheOriginalBeeCee no happened month after I got it when it was 20 degrees out car juy revved up wouldn't go over 30 did it once first year did it 3 time's last dealership did a spill and fill only replacing 4 quarts of fluid still doing it so I just let idle for 20 minutes if it's pretty cold did buy the filters for it and gasket going to do a complete change when weather warms up got all the parts that you had on your link

[@TheOriginalBeeCee]

@@jeffreycloonan8539 got ya. very interesting man. I would maybe see if you can pull any trouble codes from the transmission module. Some decent scanners & OBDII Bluetooth Dongles/App can read transmission trouble codes. Some can also read live data too. Might be worth looking into it, might just reveal an underlying issue that you weren’t aware of.

[@bluemoon3050]

What's the link for the twerk specs?

[@TheOriginalBeeCee]

The twerk specs, aye? 😆

[@rairai5516]

17 in lbs what is it in ft lbs...im about to set it at 17 ft lbs

[@TheOriginalBeeCee]

You must wanna break a bolt lol. You need an inch pound torque wrench for 17 inch lbs.

[@adams6798]

How many hours R&R?

[@TheOriginalBeeCee]

I am not sure what “R&R” means lol

[@adams6798]

@@TheOriginalBeeCee Remove & replace

[@TheOriginalBeeCee]

@@adams6798 ahh i should of figured that out lol. But it probably took me about 4 hours if i had to guess. But keep in mind i recorded the whole job so that nearly doubles the time frame lol

[@fist82]

I just replaced the Hydraulic mount and I set the torque for the mounting bracket nut to hold it in at 76 ft pounds and it broke off. Can't find another stud anywhere.

[@Rmata1993]

Thanks for the detailed instructions! Definitely hard to find. First video that popped up and your legit af!! #KZbinCerifiedMechanic

[@TheOriginalBeeCee]

Lol thanks man! Definitely appreciate the comment!

[@ashersilver7388]

Do 2012 nissan sentra

[@Followerofchrist2091]

My valve cover gasket started leaking at 90-95k.. ! Just hit 100k

[@TheOriginalBeeCee]

Thats about more on par with most vehicles lifespan of a cover gasket. I was surprised this one lasted over 200k

[@Followerofchrist2091]

@@TheOriginalBeeCee Yeah that is very interesting

[@johnjohnson916]

❤awesome

[@TheOriginalBeeCee]

Appreciate it!! 🙏

[@amadeomoable]

Nissan has the worst DIY vehicles...my family will never ever own another Nissan car...

[@TheOriginalBeeCee]

K

[@BlancaNunezMadera]

Thank you SO much for this video. Very detailed and easy to understand! I appreciate you.

[@TheOriginalBeeCee]

I appreciate the comment! Thank you 🙏