HEC-RAS Basics Part 2 of 8: Creating a 1D geometry file in RAS Mapper

  Рет қаралды 263,003

The RAS Solution

The RAS Solution

Күн бұрын

Пікірлер: 183
@sdad75
@sdad75 4 жыл бұрын
One of the best tutorial for HEC RAS on youtube. Much appreciation for your work.
@umeraltaf2567
@umeraltaf2567 Жыл бұрын
from where did he get manning values?
@ankitpaul2428
@ankitpaul2428 4 жыл бұрын
Really useful, and very well explained, I like the pace of communication particularly, it does not make the video boring and maintains interest. Thanks again :)
@sanatanart544
@sanatanart544 4 жыл бұрын
I am going to start my project using Hec Ras . Have you completed your project? What was your project topic?? Plzz reply
@Shayner38
@Shayner38 3 жыл бұрын
Is there a solution to the Unsteady flow Flow hydro graph not creating the time intervals correctly thus causing the data to plot wrong? For example my intervals are set to 10 minutes but it counts 00:10, 00:20 , 1:30, 1:40, 1:50, 1:00, 1:10.....
@TheRASSolution
@TheRASSolution 2 жыл бұрын
Never heard of this Shayne- I would delete the unsteady flow file and start fresh. If it persists let me know. -Ben
@kellenkromm6947
@kellenkromm6947 2 жыл бұрын
Same issue here in 6.0.0
@carolyang3329
@carolyang3329 2 жыл бұрын
Great tutorial. Also, if anyone else is having this issue, at first my Edit Manning's n or k values window was only allowing me to edit n#1. I clicked on the "Reduce to L Ch R" button above the table and was able to edit n#2 and n#3. Maybe this is something that changed as the default between versions of HEC-RAS.
@pratik123pratik123
@pratik123pratik123 Жыл бұрын
Really helpful
@mahdisadri8314
@mahdisadri8314 10 ай бұрын
thank you , was really helpful
@bell_khalo
@bell_khalo 4 ай бұрын
Thank you for this
@haridhungel8657
@haridhungel8657 5 жыл бұрын
Hi, Chris Goodell recommend me to watch your videos and it’s great. Thank you so much for making such a great informative video and keep making these kinds of detailed video for new learners.
@philgryz9172
@philgryz9172 5 жыл бұрын
Hair did you go to YSU.? I did as well.
@jasonwilk4473
@jasonwilk4473 3 жыл бұрын
Hi there, thanks so much for the video! You mention around 5:45 that you can define horizontally varying roughness from a .shp file. I cannot figure out how to apply manning's n data in this format to 1D cross sections. After researching it seems like land cover / manning's shapefiles can only be used for 2D modeling. Is this true? Thanks so much for the help!
@TheRASSolution
@TheRASSolution 3 жыл бұрын
You are correct. But in the new beta release of version 6.0 you can now apply n values to cross sections from shape files. I haven’t tried it yet though.
@jasonwilk4473
@jasonwilk4473 3 жыл бұрын
@@TheRASSolution Thanks so much for the feedback. I have downloaded the beta and am trying with no success yet, but I'll report back if I am able to figure it out. Do you know if 6.0 will allow users to apply polygon shapefiles of obstructions to cross sections as well? Thank you so much for the help and all of the content. Subscribed!
@TheRASSolution
@TheRASSolution 3 жыл бұрын
@@jasonwilk4473 about obstructions, I don’t think so.
@JALAJDARPAN
@JALAJDARPAN 3 жыл бұрын
@@TheRASSolution Sir these are already there in Tuflow.unfortunately that's comercial software
@ZKYBill
@ZKYBill 3 жыл бұрын
@@jasonwilk4473 Hi Jason, I have ran into the same problem. I am using 6.0. After creating the geometry file, section that suppose to display manning's n values are grey-ed out. The manning's n and k value table also only shows n#1. an additional n value column was found in the cross section editor. Please let me know if you have found any solution. Thanks.
@khylayly7579
@khylayly7579 6 жыл бұрын
This is exactly what I was looking for. Alway Enjoy ur video and webinar, can't wait for the 2nd part of the bridge and culvert webinar.
@chrisstewart1168
@chrisstewart1168 5 жыл бұрын
That was really good. So much info compressed into a short course. Thank you.
@carlosdeandres4998
@carlosdeandres4998 Жыл бұрын
Incredibly helpful, thanks
@nmsabuj9701
@nmsabuj9701 5 жыл бұрын
Excellent tutorial for the GIS modelers. Thanks for sharing...
@eosmusic9872
@eosmusic9872 5 жыл бұрын
much appreciated, this is making it much easier to jump back into using this
@TheBureki
@TheBureki 4 жыл бұрын
Thank you for helping me complete my thesis!
@galinalabaznova4227
@galinalabaznova4227 2 жыл бұрын
Great presentation! Much appreciation for your work!
@jheadley635
@jheadley635 Жыл бұрын
For the Normal Depth slope calculation, should I go from the river beginning to end in a straight line? Or should I follow the meandering of the river?
@gracegarcia3051
@gracegarcia3051 4 жыл бұрын
Thank you. I like your tutorials very much.
@michellekan1753
@michellekan1753 3 жыл бұрын
I can’t find the tab for google satellite when I wants to change the google transparency, can you tell me where did drag it from?
@rutujabhalerao1213
@rutujabhalerao1213 Ай бұрын
hello sir. Why you have perform rating curve on road?
@hikikomorihachiman7491
@hikikomorihachiman7491 7 ай бұрын
Awesome as always
@sindbad203
@sindbad203 2 жыл бұрын
Thank you Krey!
@j-sylmatiling4764
@j-sylmatiling4764 8 ай бұрын
Hi, where do I get the roughness area for that table you've inserted.
@kirstencowley2651
@kirstencowley2651 Жыл бұрын
Hi I'm working in the later version of Hec-Ras and I don't have a drop down menu from my new geometry box. It just say 18 empty layers. can someone help with this?
@_parikshit_kumar_
@_parikshit_kumar_ 3 жыл бұрын
Error loading image from from file in map layers of RAS Mapper. A red dot on Google satellite. How to remove this error?
@xiangyuan1995
@xiangyuan1995 3 жыл бұрын
please help! does anybody know why on the left hand side of my RAS Mapper, "Rivers", "Cross Sections", "Storage Areas", "2D Flow Areas", "Pump Stations", "BC Lines", "Manning's n", "infiltration", "Percent Impervious" are not able to be edited? the colors of those options are all grey, and when I tried to make edition of "Rivers", RAS Mapper just stopped working, urgent, please let me know if you know why, please!
@umeraltaf2567
@umeraltaf2567 Жыл бұрын
Please suggest me from where to get manning values?
@fibortan9481
@fibortan9481 3 жыл бұрын
Very clear tutorials! Thank you sir.
@aftabahmed435
@aftabahmed435 2 жыл бұрын
Great videos and very helpful. I have a question here. How did you put Mannings n value in n# 02 and N3# 03, those are uneditable here with me. And, n# 01 value is -9999. Kindly guide... thanks in advance
@Raj-ym7vd
@Raj-ym7vd 2 жыл бұрын
did you get the solution because i faced same problem
@nuncapierdaslafe
@nuncapierdaslafe 5 жыл бұрын
Its very usual finding empty spaces between two water bodies (as two wave fronts or separation of flow) in HEC RAS 2D, but in fact this doesnt happen in the reality. What would you consider as the mistake or how to solve it?
@apeesharma2373
@apeesharma2373 Жыл бұрын
Nice tutorial. But I am confused that how could we measure slope value for normal depth in downstream???? how you put 0.001??
@jonsina-hi8fx
@jonsina-hi8fx Жыл бұрын
Hi, I wanna say U - thank U very much for your presentation. But I've some problems. Can U help me? When I'm gonna "Compute" my results - I've these ---- "HDF_ERROR trying to close HDF output file: HDF5-DIAG: Error detected in HDF5 (1.8.11) thread 0: #000: ..\..\src\H5T.c line 1761 in H5Tclose(): not a datatype major: Invalid arguments to routine minor: Inappropriate type
@oluwakayodethompson219
@oluwakayodethompson219 2 жыл бұрын
Great presentation, just the tutorial video i'm looking for. But i'm curious as to if there's a way to export river reach from AutoCad file obtained from surveyors to Hec Ras. I'll look forward to your timely response. Thanks
@pranavsingh5672
@pranavsingh5672 3 жыл бұрын
sir in RAS mapper in map layers my google satellite view is not showing i tried so many times please tell me how it is possible to see that.
@swatikulkarni6585
@swatikulkarni6585 2 жыл бұрын
Sir how you are downloading the terrain? Which format is that and is there any requirement that hec ras must have that terrain in that?
@hannahmaesubang1892
@hannahmaesubang1892 3 жыл бұрын
Hi, just wanted to ask what will happen to the cross sections lines if there are junctions? Thanks in advance :)
@Chi8RachelB
@Chi8RachelB 3 жыл бұрын
Hi, thank you for your presentation. I get this error message when I run my unsteady simulation: Performing Unsteady Flow Simulation HEC-RAS 6.1 September +STOP! Error in the time window. HDF_ERROR trying to close HDF output file: HDF5-DIAG: Error detected in HDF5 (1.8.11) thread 0: #000: ..\..\src\H5T.c line 1761 in H5Tclose(): not a datatype major: Invalid arguments to routine minor: Inappropriate type Error starting unsteady simulation - Stopping compute process Does anyone know how to solve it? Thank you very much
@alexfirstov6361
@alexfirstov6361 2 жыл бұрын
Hi, please help me. When calculating, the following error appears Performing Unstable Flow Simulation HEC-RAS 5.0.7 March 2019 +STOP! Error in the time window. HDF_ERROR trying to close HDF output file: HDF5-DIAG: Error detected in HDF5 (1.8.11) thread 0: Error starting unsteady simulation - Stopping compute process Computations Summary Computation Task Time(hh:mm:ss) Completing Geometry(64)
@infraplanhydrauliclaborato4108
@infraplanhydrauliclaborato4108 2 жыл бұрын
Amazing work, Thank you!!
@sigitriswanto344
@sigitriswanto344 3 жыл бұрын
Hi The RAS Solution, can i get a video or exsample of hec racs drainage with pump, please?
@adrianacalderon7418
@adrianacalderon7418 5 жыл бұрын
What are these n values that you are adding to the table in Mannings values?
@TheRASSolution
@TheRASSolution 4 жыл бұрын
These are just typical values. The HEC-RAS user manual includes tables with suggested values for different land covers.
@milenasouza2536
@milenasouza2536 4 жыл бұрын
congratulations! a useful and simple video!
@5alekm3aya1
@5alekm3aya1 3 жыл бұрын
how can i get a map and can you send this map in vedio to me pls .. thnks
@kevingalarza1675
@kevingalarza1675 10 ай бұрын
how do i create the cross seccion without draw?
@moussamara8806
@moussamara8806 Жыл бұрын
Hello everyone, I have 2 questions... 1- Is it possible to do 1D Ras Mapper modeling using rain as input data in HEC-RAS...? 2- Is it possible to use the Curve Number (CN) in 1D/2D modeling in HEC-RAS...? If you have any documents or videos, please share them with me... THANKS🙏
@ปรณัฐบุญหมั่น
@ปรณัฐบุญหมั่น 3 жыл бұрын
I’m can not open a Google map on the Map layer
@rustanjayceeflores5841
@rustanjayceeflores5841 4 жыл бұрын
very helpful video. sir can i use my rainfall data to project the velocity,flow and water discharge.. and also where did you get the data you put in the flow hydrograph looking forward for your response
@siminakhlaghi5466
@siminakhlaghi5466 4 жыл бұрын
Hi, when I complete geometry and check error , this error is appear: "left bank station point is different than the bank line intersection( >1%) Or another error is "left reach length not defined , right reach length not defined" whilst all of geometry elements are defined. Help me please
@pathanazaz3471
@pathanazaz3471 4 жыл бұрын
Hello sir, when I added DEM (Alaska satellite or Cartosat-1) in to RAS mapper when it creat, it shows the negative elevation..what should i do?
@s.m.asaduzzamanreshad575
@s.m.asaduzzamanreshad575 5 жыл бұрын
my software doesn't compute! it says no station elevation data in error .........need help
@BorneanHeadHunter
@BorneanHeadHunter 5 жыл бұрын
Best tutorial so far in youtube. thanks. please upload workflows integration guide for 1D and 2D QGIS and HECRAS? thanks.
@riapedrita
@riapedrita 3 жыл бұрын
Would also like to learn about different workflow with QGIS, Freecad etc
@catmemecollector
@catmemecollector 6 ай бұрын
Thanks for sharing!
@benedictebatunta9487
@benedictebatunta9487 4 жыл бұрын
Hello thanks for this video. But i have a issue when it comes to the processing of the unsteady flow analysis. Apparently "the time series data ends before the end of simulation" that is the message that i am still getting. If you have an idea of how to solve this please let me know.
@hec-ras2dm853
@hec-ras2dm853 4 жыл бұрын
Hello, please send me your model i will help in this my email is designnetwork87@gmail.com
@ganeshmaddikeri
@ganeshmaddikeri 3 жыл бұрын
Hello, I am new HEC RAC. Please share simple tutorial to know flow rate and dept variation along channel length time for rectangle flow channel. Can we see effect of air flow above channel on flow property ( flow rate and depth ) using HEC RAS?
@rudrakshigogoi8493
@rudrakshigogoi8493 4 жыл бұрын
I am using hecras for dhansiri watershed. On what basis does hecras simulate the data for future prediction of events. I have discharge data for present time. Can I predict future events using the same.
@rohi7597
@rohi7597 3 жыл бұрын
Use HEC HMS tool
@erlinpasa2567
@erlinpasa2567 5 жыл бұрын
How's you got the map format hdf? Please share that link
@TheRASSolution
@TheRASSolution 5 жыл бұрын
Generally the terrain will be in tif, asc, flt, or similar format. It typically would not be provided as an hdf file. In RAS Mapper, you would click on Terrains, then select Create New Terrain, add the file, and choose a name for the hdf file that RAS Mapper will convert to.
@georgebariamis2002
@georgebariamis2002 4 жыл бұрын
Great tutorial ! Thank you so much !
@gajelaswkwk8903
@gajelaswkwk8903 5 жыл бұрын
Hello. i have problem for dam break analysis in HEC RAS 5.0.7. when I will do the computation the warning appears "water surface tolerance outside of range [0.0000001 to 0,006]" and "storage area tolerance outside of range [0.0000001 to 0,06]" so, what I need to improve? please help me. thanks
@TheRASSolution
@TheRASSolution 5 жыл бұрын
Sounds like instabilities in the model. I usually start by reducing the time step, but there could be other issues going on. If you are still having issues feel free to contact me through www.surfacewater.biz/contact/
@mahamatissa5547
@mahamatissa5547 4 жыл бұрын
Good evening how to have the data of the grounds and the projections. Thank you
@Desmondofosuanim
@Desmondofosuanim 3 жыл бұрын
kzbin.info/www/bejne/eIbNd5KDfMirj7M
@anupalbaruah3654
@anupalbaruah3654 3 жыл бұрын
hI, I need to know about the RIparian vegetation simulation module in HEC RAS.iI am not able to find it. Is it integrated within HEC-RAS1D or we need to download it
@rohi7597
@rohi7597 3 жыл бұрын
You need to add Manning's land cover shp file layer
@antonios5572
@antonios5572 4 жыл бұрын
Hi Krey, little question, what to do if my DTM data not match the WMS basemap? I've a offset for about 140m. It isn't a real problem, but it bother me a lot
@Aldoodgrgr
@Aldoodgrgr 6 жыл бұрын
realy helpful video , thank you a lot for this, god bless you.
@robertbillings7006
@robertbillings7006 6 жыл бұрын
Great video - thanks for posting. I'm a "geoRAS" guy just learning RAS Mapper. I would like to see more basic RAS Mapper videos . How about tying existing RAS files to new segments of RAS files from RAS Mapper.
@scholarphd4049
@scholarphd4049 5 жыл бұрын
Thank you for the informative tutorial. I repeated the tutorial with HEC-RAS 5.0.7 several times, each time at the end when I Compute I get this answer: " Time series data ends before the end of simulation" Kindly guide me where am I going wrong..
@MrWebon
@MrWebon 5 жыл бұрын
Your simulation time should be the same as your flow hydrograph data
@TheRASSolution
@TheRASSolution 4 жыл бұрын
You can add zeros to any blank cells in the time series hydrograph data (or just add one zero at the beginning and end of the blank cells and use "Interpolate vales" button to add the rest. Even if there is no flow, you'll need to specifically add a zero to any ordinate that falls within the simulation window.
@beauthetford7608
@beauthetford7608 2 жыл бұрын
Thank you so much for that!
@204-wre-chukkaangelina7
@204-wre-chukkaangelina7 3 жыл бұрын
Do we need to give boundary conditions for 1D unsteady flow?
@JALAJDARPAN
@JALAJDARPAN 2 жыл бұрын
yes it's mandatory
@ngoanhtufns6956
@ngoanhtufns6956 3 жыл бұрын
Perfect. Thanks!
@s.m.asaduzzamanreshad575
@s.m.asaduzzamanreshad575 4 жыл бұрын
Thank you,sir,for your video.what will I do when I have lots of tributaries?
@rodrigoperdigao9074
@rodrigoperdigao9074 4 жыл бұрын
Thanks for the video! It helped me!
@tranhuuhuyqytlmn
@tranhuuhuyqytlmn 4 жыл бұрын
I did every step exactly as the instruction but when I finished, there was no data for each cross-section. Could someone explain why?. I used DEM 90m to created the terrain. Thank you
@LUMIGOCHA
@LUMIGOCHA 4 жыл бұрын
For a width as long as that, you would need corss-sections longer than 90 m. A section with length below 90m would be just a line, and couldn't be able to form the intend geometry. It would be better to use a more refine DEM, such as ALOS PALSAR (12 m), free to download, so you can define a better section.
@neilapolonio3727
@neilapolonio3727 2 жыл бұрын
Hi, I would like to know where you can access or download the projection file needed which was stated in the early minutes of the video, I would really appreciate it if you can give few words or link because currently I'm following your simulation for our Thesis. Thank you very much
@TheRASSolution
@TheRASSolution 2 жыл бұрын
Some additional background on projections, including resources for downloading projection files, is included here: kzbin.info/www/bejne/eIbNd5KDfMirj7M
@md.abusayed6249
@md.abusayed6249 3 жыл бұрын
1. What will happen if the two rivers meet at junction point ? 2. if one river leaves from the main river ? or Additional flows add on the channel or some flows leaves from the main channel ? If anyone can please help me
@germainebas4494
@germainebas4494 3 жыл бұрын
thanks for the video! i have completed my step 1! Do you have any 1D-2D coupled model please?
@hend72able
@hend72able 4 жыл бұрын
how can I get HEC-RAS?
@karalissotiris1474
@karalissotiris1474 Жыл бұрын
great video! to the point..
@hyacinthmelloza9146
@hyacinthmelloza9146 3 жыл бұрын
Hi Sir. May I ask for help. Where can I input the value for Tidal?
@JALAJDARPAN
@JALAJDARPAN 3 жыл бұрын
tidal gauges(Stage hydrograph) are generally applied for the downstream boundary
@irpanch
@irpanch 6 жыл бұрын
Halo Sir, Is there some function/tools like "Edit Vertex" after we creating a geometry file in RAS Mapper? for example, if we want to adjust the bank line that we just created, maybe it's too long or too short and we want to move it just to a specific location. I only found "Edit Feature" tools, and it moves all the line that we just created.
@irpanch
@irpanch 6 жыл бұрын
Ok. Thank you, tested and worked.
@TheRASSolution
@TheRASSolution 5 жыл бұрын
Be sure to select the editing tool then double click on the feature to make changes.
@dunkinh
@dunkinh 4 жыл бұрын
It seems that after we edit the lines (flow path, or bank lines), the newly edited information or data can not be passed along back to the geometry file. Example, after editing bank lines, the left/right bank stations in XS edit window do not get updated to the new bank line position/station.
@kkuholski23
@kkuholski23 6 жыл бұрын
Are there any additional videos to help someone new at setting up an area for the first time and getting the correct rainfall number for different years event?
@TheRASSolution
@TheRASSolution 4 жыл бұрын
Rainfall will be specific to each geographic area, and you would need to compile gauge data for your local region from whatever jurisdiction or agency collects the data.
@madhurendramadhukar8
@madhurendramadhukar8 4 жыл бұрын
@The Ras Solution: can you please make one video on Dam backwater analysis?
@giancarlonolledi358
@giancarlonolledi358 4 жыл бұрын
Fantastic! really thanks
@JoyceNAMUGANGA-l9p
@JoyceNAMUGANGA-l9p Жыл бұрын
it's indeed helpful thanks
@bagashendip4794
@bagashendip4794 6 жыл бұрын
Really help my studies, can i know the resolution of your dem for your terrain input? and where did you get the dem file, thank you
@bagashendip4794
@bagashendip4794 6 жыл бұрын
Thank you from Indonesia. I hope there will be dem with high resolution for my country soon. Im still using 30m resolution data from USGS and thats not good enough
@tyeasmin
@tyeasmin 6 жыл бұрын
is it free for Canada digital elevation models too? If so, would you be able to forward the website, please?
@TheRASSolution
@TheRASSolution 5 жыл бұрын
The terrain data in the model comes from the Australian government. Links are included in Workshop 1 document which is available for download at www.surfacewater.biz/workshop/. There are many, many data sources for individual countries. Probably just start by googling "Free DEM data" with the name of the area included in the search.
@retrovintage950
@retrovintage950 4 жыл бұрын
Ras Mapper NOT Opening... ? how
@fcernst
@fcernst 4 жыл бұрын
Great presentation..very helpful! I would like to see a 1D model split into an upstream and downstream reach, then connect a 2D flow area between them... to create one 1D/2D model. Thank you.
@md.abusayed6249
@md.abusayed6249 3 жыл бұрын
If the reaches are more than one then what will happen ?
@rohi7597
@rohi7597 3 жыл бұрын
Add junction point📍
@md.abusayed6249
@md.abusayed6249 3 жыл бұрын
@@rohi7597 can you please send me any video tutorial link to add junctions?
@mohammadhassan8915
@mohammadhassan8915 5 жыл бұрын
wonderful sir ! where can i download the terrain file (.hdf) for my region of interest ..?
@TheRASSolution
@TheRASSolution 4 жыл бұрын
I've added a "prequel" video that outlines the data sources for the files we've used: kzbin.info/www/bejne/eIbNd5KDfMirj7M. Additional data sources include openDEM. NASA, USGS, etc. Every region will have its own repository for elevation data, sometimes requiring payment, sometimes free. Keep in mind you generally won't be able to download hdf format files for the data - the terrain surfaces will usually come in geotif, asc, flt, dem, or similar format. You would then need to create the hdf file in HEC-RAS using those files as a basis.
@marlonsuelto8153
@marlonsuelto8153 3 жыл бұрын
Hello Sir. Do we need to buy the DEM file?
@rohi7597
@rohi7597 3 жыл бұрын
USGS
@amruthvaragani6429
@amruthvaragani6429 4 жыл бұрын
really helpful, Sir after mapping the bank lines, flow lines and while drawing the cross section line it is showing the negative values (like : 0, -0.003, 0, -0.004....) can any one help me with this ??
@JALAJDARPAN
@JALAJDARPAN 3 жыл бұрын
there is wrong projection of .prj file. projection may be degree in that's why you're getting like that.change projections to meters
@mustaphaboukhelifa8052
@mustaphaboukhelifa8052 4 жыл бұрын
Really nice Video and great Job. Is it possible to create multiple cross section with preset spacing and width (as in autocad civil 3d) in ras mapper?
@patrickhumas5127
@patrickhumas5127 5 жыл бұрын
when ı press the ras mapper, ıt's not opened.what is the reason, how can ı open it?
@TheRASSolution
@TheRASSolution 5 жыл бұрын
Generally that's related to a Windows issue, especially if it's 32 bit (RAS Mapper is 64 bit). Be sure to run all windows updates, including .net framework and that will usually solve the problem.
@nouredinetouati6438
@nouredinetouati6438 5 жыл бұрын
please how to edit manning's value ?
@TheRASSolution
@TheRASSolution 4 жыл бұрын
You can edit Mannings roughness in each cross section individually or use "Tables | Mannings n" in the Geometry Window
@nouredinetouati6438
@nouredinetouati6438 4 жыл бұрын
@@TheRASSolution thank you
@lenonoliiveira
@lenonoliiveira 4 жыл бұрын
Thank you so much!
@sanatanart544
@sanatanart544 4 жыл бұрын
I am going to start my project using Hec Ras. have you completed your project topic? Please help me sir...please
@archanagautam8506
@archanagautam8506 4 жыл бұрын
Plz make video how to make terrain in hdf file and second how to get prj file
@JALAJDARPAN
@JALAJDARPAN 3 жыл бұрын
Hdf file constructs TIN(triangulated network) from the input DEM. i made video on generation of prj. file tutorial .you can check that in my channel
@awelhaji5531
@awelhaji5531 4 жыл бұрын
That was really good. Sir i want to ask you one question how i can simulate river discharge using HEC RAS
@HHHH-ki4uu
@HHHH-ki4uu 9 ай бұрын
Awesome
@kiritokun5082
@kiritokun5082 4 жыл бұрын
Im having ws el error computing unsteady flow pls help
@hec-ras2dm853
@hec-ras2dm853 4 жыл бұрын
Please contact me on my email i will be able to help Designnetwork87@gmail.com
@daoudmannai576
@daoudmannai576 4 жыл бұрын
hi pleas you cane give me site for downloud ras mapper
@salpiseyheng6089
@salpiseyheng6089 5 жыл бұрын
Dear Dr. Krey, I would like to ask you if I have floating house in the river and I want to include them in my model because they also effect to flow. How to do it, Dr.? Thank you.
@rajendrakunwar7984
@rajendrakunwar7984 5 жыл бұрын
great content. really. hope there are some ways i can help you. keep it up and upload other videos too
@biplabbiswas8877
@biplabbiswas8877 4 жыл бұрын
EXCELLENT!
@eyiigamartin300
@eyiigamartin300 5 жыл бұрын
I want to use HEC RAS to do a dam break analysis. any help. otherwise great video
@TheRASSolution
@TheRASSolution 5 жыл бұрын
You could try the free webinar at kzbin.info/www/bejne/n4OmiqCHqLyHjqM or sign up for the upcoming online course at www.surfacewater.biz/online/
@BobBob-qg5cx
@BobBob-qg5cx 5 жыл бұрын
Can you please send me the demo files that you used? thanks
@TheRASSolution
@TheRASSolution 5 жыл бұрын
Links are included in Workshop 1 document which is available for download at www.surfacewater.biz/workshop/.
@jorgealbertobelmontguadarr3563
@jorgealbertobelmontguadarr3563 5 жыл бұрын
Where I can find those files? (.hdf & .prj)
@TheRASSolution
@TheRASSolution 5 жыл бұрын
The first steps and links sre covered in Workshop 1 which is available for download at www.surfacewater.biz/workshop/
HEC-RAS Basics Part 3 of 8: 2D Flow Areas and Refinement Regions
6:35
The RAS Solution
Рет қаралды 109 М.
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
Advanced Modeling 1.2 -  2D Modeling Demonstration
31:08
HEC RAS 6
Рет қаралды 34 М.
Creating a basic HEC-RAS 1D Floodplain Model
32:51
Learn HEC-RAS
Рет қаралды 6 М.
Precipitation model with HEC-RAS 2D
6:59
Ana Juárez Gómez
Рет қаралды 18 М.
HEC-RAS Part 5: Natural River Cross Sections
22:06
Hassan Davani
Рет қаралды 8 М.
Importing USGS Terrain Directly into HEC-RAS Mapper
5:19
Stanford Gibson
Рет қаралды 10 М.
Adding an Internal Structure to a 2D Mesh in HEC-RAS
8:56
Stanford Gibson
Рет қаралды 12 М.
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.