How To Animate Your Monster In Rec Room | CV2 Tutorial

[@PatrickGTV]

This was so helpful! I was really confused. Thank you for making this tutorial! 👍👍👍

[@theRCLman]

Np thanks for watching:)

[@road-vr]

@@theRCLmanmake a 2024 version

[@just-a-guy30]

Just noting, to make a proper walk cycle you want to put a frame in between the frame where your monster moves and make it so he is raising on of their legs while the other leg slides so it straight, and then you want to do the same but the opposite and when your monster is moving back to the original frame. Hope this helps

[@Pixelgun780]

This helped me so much thank you, now I am trying to make a game with my friend and I have watched lots of your vids and liked all of them thank you

[@theRCLman]

glad they are helping thanks for watching :)

[@SusDoctor]

_"Roblox cube monster"_

[@theRCLman]

Oof

[@matthewmedina8573]

@@theRCLman and now it’s named barry

[@russianguy9731]

@@matthewmedina8573 il name it bob

[@IcyPossum]

@@russianguy9731 yea me too.

[@mandybisson1280]

@theRCLman

[@MadMan_-ho9ib]

If only you posted this a couple hours earlier. Would've helped with my mech. Still helpful tho considering I'm not great at using the animation gizmo

[@theRCLman]

thanks for watching :)

[@eecaps]

i found a good speed, 0.09 makes the monster go fast but slow enough for you to outrun it by running

[@theRCLman]

good to know

[@LitoMike]

nice

[@LitoMike]

i do 0.4 cuz in my opinion its just right for an insanely hard entity

[@interactive251]

Thanks so much for these videos! These are gonna help me and my friends a lot

[@theRCLman]

glad they helped thanks for watching :)

[@mintburger2221]

im making a game with you tutorial videos, i love you man!

[@theRCLman]

Glad to help, thanks for watch :)

[@nicolette1598]

🤭😳 okay so u guys actually are making this within the game insane lmfao. I use cinema 4d & Unity for work and it’s a lot easier lmdao. Like the amount of grit and patience you’d have to do this is just ridiculous but bravo guys I’m impressed!

[@theRCLman]

they are making rec room studios which allows you to create in unity and bring it in, should be much more comfortable

[@Ower2525]

i am waiting for this so long! Thanks!

[@theRCLman]

Hope it helps :)

[@Galaxyuniverse15]

Thank you for this video I was looking for an hour until I found this you made my day thank you so much this is very helpful thanks for the awesome video!

[@theRCLman]

glad i helps thanks for watching :)

[@THEZENLEADER]

I mean, Barry slick tho he walking around like when it’s finally the weekend 😅

[@theRCLman]

barry(scottish accent)

[@silly..sausage]

tip (i haven’t animated yet.) if you want to make small bugs, just use 1 block as a leg

[@theRCLman]

word, thanks 🥰

[@jackohq350]

Once again a perfect video

[@theRCLman]

thanks man :)

[@GMONEY-n8g]

Man bro RCLman helps me with everything man thank you

[@theRCLman]

glad it helped, thanks for watching :)

[@GMONEY-n8g]

@@theRCLman yep and keep up the Super super super super super super super super good work

[@DB_RR]

I already knew how to do it but I’m clicking anyways

[@Speculant]

Ahhhhh! You know, you can select some shapes ointment the object, then hit the 3 dots and then press, „centre pivot on selection“ and it changes the pivot point

[@Speculant]

Oh wait nevermind, just, you could’ve used glamrock Freddy.

[@theRCLman]

thanks man

[@official-K1NG]

Actually god teir helpful 😁 been looking for a video like this and found it and it deliverd tyyy so much

[@theRCLman]

glad it helped :) thansk for watching

[@TriGGaBoyCed]

Thanks for this video 👍

[@theRCLman]

thanks for watching :)

[@di3go_frmsa]

What I did for the jumscare is i wacht the video you made then I use the walking monter you made then I use a cv1 trigger volume and use a respawn point then it plays the jumscare seat and that how I did it but it’s kinda broken😞

[@theRCLman]

so iwas really trying to get it to work for this vid but it was also not working, luckily a friend showed me a cool new way so we don't have to attach a cv1 zone just a cv2

[@Double-health]

Hey I got a question. So if you make an animation with the motion chip then how are you supposed to make it move, pls make a tutorial about it. I been looking for hour and hours

[@theRCLman]

Make a cube and make the cube tollow you, then clamp the animation gizmo to the cube, what ever is attached to the animation gizmo ahould follow as long as its playing

[@Double-health]

I think I already tried that

[@Double-health]

Probably it’s just frozen or something

[@Double-health]

Wait

[@Double-health]

When I make the cube follow me with the other pieces do the other pieces with physical?

[@ssefe3271]

It’s like a genie but with my comments 🤣😂🥲🙂🙃

[@theRCLman]

:) thanks for watching, once enough ppl send me comments about the same thing i try to do them

[@gachacx9811]

Could you remake the how to make a bot follow up cuz I looked at your old video and it did not work

[@theRCLman]

idk if you watch v3 or v4 but this is the most recent one kzbin.info/www/bejne/rKLPm42MpKyKo5o also heres the long version if you need more help kzbin.info/www/bejne/hIaVmZKQhLCBicU

[@woodland2854]

Hi RCL Also it’s been a while so I though I’d say hi! (Also great tutorial!)

[@theRCLman]

Hello, thanks for watching:)

[@Niscoe]

Yes i have ben waiting for soooo long

[@theRCLman]

Srry it took so long wish i coukd Express the garbage fire this whole thing was / is

[@abaier82]

When I try to center the pivot, it doesn't pop up. I think thus is because the arm is made up of at least 15 circles. Does that make it impossible?

[@theRCLman]

Hmmmmm try selecting all the circles that make up the arm

[@abaier82]

@@theRCLman I just didn't center it first. I hope it'll still work

[@Germanrobot250]

This helps to much and thx very very much i love youre vids bro and have a nice life youre in my heart and thx very much accepting friend bro❤

[@theRCLman]

thanks for watching :)

[@-SunnyVR-]

This was an amazing tutorial! 👍

[@theRCLman]

thanks for watching glad you enjoyed :)

[@flamethedude4300]

So I was making a pet shiba inu that follows you around, Everything works, but when i try to hook up the animation it flips the shiba so his head is pointing down and moves it about a meter away.

[@theRCLman]

hmmmm unfortunatly i think you gonna have to hook the animation gizmo up then animate it

[@flamethedude4300]

@theRCLman Nevermind, I figured it out! I just had to go on the animation gizmo and change his location from there. Thanks, though!

[@CoolPenguin11]

For flying ones how do you make the wings go up and down without a rest delay on the wings cause when I tried it with a flying creature it worked but the wings were flapping weird

[@theRCLman]

my guess is durring animation add in a fram where it just stays still

[@hellooo-l8f]

thank u homie

[@theRCLman]

thanks for watching :)

[@1cozmo1]

Hey I'm still trying to figure out how to make a running and walking thing with cv1 but it's pretty bad because I used a look at gizmo to Move pistons to the player. But the problem is the look at gizmo glitches out if you get to close. It makes the monster I made look up and I don't know how to fix it

[@theRCLman]

It seems you have to turn off the look at when it catches the player

[@1cozmo1]

@@theRCLman but the problem is since it's cv1 there's a trigger volume when you enter it adds speed to the monster if you are to far tho it makes the monster look up

[@theRCLman]

@@1cozmo1 hopefully the newest vid i did will make the kill animations work better

[@BobbyBrownmc]

Yo man i was looking at ur profile in rec room (im not a stalker) and i saw we had so many mutuals its crazy about the amount of mutuals we have

[@theRCLman]

I accept all friend requests pretty much

[@smellymonkey7480]

when i attach the role after i put the arrow thing into it all it does is look at me it does not follow

[@theRCLman]

do you have modify with circuits on? do you hear an error noise?

[@VexTroviser]

When I try to edit the Animation gizmo it doesn't work please help.

[@Puluga]

He just liked 5e comment and never respond💀

[@Sortl_]

My friend making a game and when i asked "did you gonna watch RCLmans tutorial" hims pov: no. **runs**

[@theRCLman]

lol :)

[@anti_IGOR]

How do I add wall collision my monster while having the animation gizmo still running?

[@theRCLman]

I have a video about adding wall collision,see if u can find, adding animation is the same

[@anti_IGOR]

@@theRCLman I’ve seen the video before and used it but usually the animation never works with the wall collision.

[@SONTHFC_EDITX7]

Idea: Make a video of a tutorial about monster fitting through a large door (Like when they don’t fit and they hold the top of the door duck or crouch a little bit down and pass thru)

[@theRCLman]

Omg yes but honestly not even sure how to start lol

[@Scre1mingcat]

Like in the backrooms level 1? I’m talking about the backrooms all seeing

[@SONTHFC_EDITX7]

@@Scre1mingcat yeah I’m making a backrooms game based on all seeing

[@THEZENLEADER]

I think I know how to do that 🤔

[@LitoMike]

trigger zone that starts an animation?

[@simplystatic69]

this is very off topic but how do i connect multiple pins to the stop pin on the animation?

[@theRCLman]

I d ou nt think you can directly but you can hook each stoping trigger to the inputs of a combinator the put the combinator output to the stop, that will let you have 3 th8ngs to trigger a stop

[@JrTp3rm]

for some reason when I wired the monster to the look at it would not allow the animation to move it

[@theRCLman]

hmmm is the animation on>?

[@JrTp3rm]

@@theRCLman yes but it glitches because gizmo is holding it in place

[@MailmanVR]

Hey @therlman did they change the animation gizmo whenever I wire it to anything it selects it and its really pissing me off

[@theRCLman]

they broke it on last update hope they fix in the next

[@MailmanVR]

@@theRCLman yeah

[@JumpOnIt-THX]

Could you do I video on how to make a normal animation and a chase animation, please

[@theRCLman]

in this vid: kzbin.info/www/bejne/d2XElYR-fLSbrMk we have it switch between walking and killing animation you can use the same method to switch between walking and chasing

[@simplystatic69]

THANK YOU

[@theRCLman]

Np:)

[@berrymansir]

Do you know how to make the ai from the ignited Freddy game?

[@theRCLman]

This whole series of videos is leading to that however its gonna take some timee

[@berrymansir]

@@theRCLman Thanks!

[@Keoni_catt]

TYSMMMMMM🎉🎉🎉🎉

[@theRCLman]

glad it helped thanks for watching :)

[@hamishtubbie9096]

theRCLman im wondering if you can try to do a CV2 Tutorial on a wall detecting AI?

[@theRCLman]

I've got an idea to make it work justvgot to test

[@wagnerarias2731]

When do you think the poppy playtime jumps are will be released?

[@theRCLman]

its the next video, sometime nexgt week, working on script now:)

[@theRCLman]

I have run into an issue hopefully it can be solved

[@firzty]

I’ve been having way to much trouble with this so I’ve been making an ability and I have this animation but I’m not sure how to make the animation play where their right hand is I’ve been having so much trouble I’ve been looking for help on the rec room discord but no luck so I’ve come here hoping for help if you see this please help I’ve been trying for about a week now

[@theRCLman]

So it seems you want an animation to follow your hand, idk if you can set position of an animation controller or animation gizmo, if you can i imagine thats how you would do it, get a 30hz constantly setting position of animation controller to you hand position then treating the animation controller as you habd animated the things you want around the animation controller, seema interesting might do video to see if works, no guarantees

[@firzty]

@@theRCLman I’ll try this thank you if it works I’m not doubting your work after I’ve seen your videos but anything is possible

[@MailmanVR]

hey @therlman yet another problem lol,my monster does look at me and play the animation however it doesnt move :(

[@theRCLman]

hmmm make sure that the cube and the monsters parts all have modify with circuits enabled

[@MailmanVR]

@@theRCLman they do im pretty sure ill double check

[@MailmanVR]

@@theRCLman nope

[@MailmanVR]

All of them are good

[@dontforgettolike7127]

Finding out about the pivot point after building my entire dog was gut wrenching. I wish you could move the pivot point instead of the object to line it up :(

[@theRCLman]

you can but only in 1 way you can select all objects then a little menu pops up that says center pivot on selection but unfortunatly thats all

[@PurpleBoyVR]

Can you make a tut of a monster that can’t walk through walls

[@theRCLman]

I think.i found a way to do it but it still needs to be tested

[@eecaps]

this will take patience, but make a map, then get invisible collision, and align them with the walls, then config all the invis collisions, set them so it collides with players, but doesnt collide with objects, then configure all the walls, and make them all decoration

[@simplystatic69]

do i have to add the “e” tag to all the objects?

[@theRCLman]

No e only has to be on the original follow cube

[@simplystatic69]

@@theRCLman ok thanks and i didn’t add the animation yet but when it follows me, it turns upside down..

[@theRCLman]

@@simplystatic69 idk if you saw but before you attach the monster, make it follow you for a second so when you attach its right side up

[@simplystatic69]

@@theRCLman oh that makes a lot of sense, thanks a lot

[@simplystatic69]

it works divinely now

[@VenyxIGuess]

Also to make it nicer use smooth

[@theRCLman]

^smart person above

[@Polvo1223]

Hey RCL when are you going to make a discord server?

[@theRCLman]

already done, go to my channel page and at the top right there is invite

[@Polvo1223]

I can't see it cuz I'm on mobile

[@Polvo1223]

Can you type the link instead?

[@theRCLman]

@@Polvo1223 omg i must have removed im srrry its in the video description lol discord.gg/seeNZbyKZb

[@idk_Meow]

Yeah can you help with the poppy playtime jump scare because when I play backroomallseeing I see the poppy playtime jump scare cv2 I think that is cv2

[@theRCLman]

Working on it someone just showed me a way to kinda solve the issue i was having we just need to see how consistent it is

[@idk_Meow]

@@theRCLman ok

[@blrecyt]

I Did Everything But The AI Goes In The Ground Like FULLY In The Ground,Is There A Way To Fix It?

[@theRCLman]

Is the object set to physical?

[@blrecyt]

Nope.

[@blrecyt]

Also The Reason It Goes In The Ground Is The Animation Gizmo Cuz When I Turn It On And The Body Parts For My Monster Are Clamped To The Gold Part On The Look At Gizmo It Just Goes In The Ground

[@blrecyt]

@@theRCLman I FIXED IT! Don’t Clamp The Parts Of The Monster Only Clamp The Animation Gizmo But If It Flys The Get The Body Parts Of The Monster And Put The Monster On The Ground.And That’s It.

[@idk_Meow]

Hi if I didn’t know how to animate this will help but I know how to animate kinda good 👍

[@theRCLman]

I guess it was more for the specific instructions to hook it up to the follow player theing from the last video

[@zzzzzzzz4237]

hey i followed every step you did and he isn’t moving is there anyway way u can help?

[@theRCLman]

Make sure modify with circuits is on, also animation must be on for it to actually move

[@zzzzzzzz4237]

@@theRCLman the modify with circuits is on and how do know if animation is on?

[@theRCLman]

@@zzzzzzzz4237 is the red number 0 or 1

[@zzzzzzzz4237]

@@theRCLman i’m not sure how to check

[@zzzzzzzz4237]

@@theRCLman i actually just realized something i was commenting on the wrong vid i meant to comment on the how to make it follow you one that u made😂

[@fredtheguy7015]

Is this possible to do without pivot points? Because I'm recreating Bear in rec room and one of the monsters is a box with legs

[@theRCLman]

yes its just harder to do in my opinion

[@victorcardenasmel3733]

Can we use your follow invention to our public maps

[@theRCLman]

Sure :)

[@Gu1t4rf0rl1fe]

Hey rcl joe mama guy here i need help remember when you said the moster can be used as a pet well it kinda just floats in the air more like on the ground how do i fix this

[@theRCLman]

in the last follow video there is a part about keeping it a constant height do that but you have to change the y number until you get it on the floor

[@Gu1t4rf0rl1fe]

Yes when I did it its just floating in the sky and cannot go up or down what do I do

[@Gu1t4rf0rl1fe]

Even when I set it to 1 or 2 or 3

[@theRCLman]

When you change the number it changes the height correct? lowering the number till it gets to the floor

[@royal_bunnie3383]

Why am i just now seeing this !!!! Lol btw this is royalBunnie 😊

[@theRCLman]

hello, hopefully the collection system worked for you, i think i made it over complicated but it works at least

[@Pineapple.gtag1]

Every time I click "add role" my monster works, but it is stuck moving sideways. Is there anyway to fix it?

[@leo-mk1cg]

ur the best

[@theRCLman]

Thanks for watching:)

[@leo-mk1cg]

@@theRCLman i need help 😭, when i connect the monster to the thing it goes well it follows you but it keeps tilting to where the top of the head is at the front

[@leo-mk1cg]

wait o think ive fixed it

[@leo-mk1cg]

nevermind 😭

[@iice6816]

How can i make the monster damage u ?

[@theRCLman]

i believe that is a combatant damage chip or ai damege chip not sure

[@MasonGamache]

Thank for the help! but is there any way to make it faster

[@theRCLman]

The animation or the monster, for the monster change the blue number on the vector gadget, for the animation you kust change the times on each keyframe

[@MasonGamache]

@@theRCLman monster, thank you so so so so so so much it really helps!

[@MFVRRTHEGOAT]

How do u conect ut to ur monster

[@theRCLman]

attach your animation to an object that is following the player via a clamp

[@Stuck-ear4]

Can you make it change the animation

[@theRCLman]

I will show you a new way to change animation in my next video :)

[@MrBusdriver1300r]

Can you make a video on how to make a ai get anger

[@theRCLman]

angrier how?

[@anthonygraham4592]

@@theRCLman I think he means a trigger volume at a certain distance for it to get angry

[@theRCLman]

You would need to hook up an if chip,and use like an less thank chip. If distance between monster and player is less than some number then activate monster

[@RuDOOMerMusic]

блин, братан, реально спасибо, каждый раз помогаешь)

[@theRCLman]

рад помочь, спасибо за просмотр :)

[@Vest.21]

@@theRCLman WTH-

[@theRCLman]

@@Vest.21 google translate

[@Mig1_910]

Can u please tell me what I’m doing wrong? Once I have wired all parts of the body to the gizmo, and press slow role, instead of walking he goes sideways and flys?

[@theRCLman]

I think you need to add role then remove the role, then reposition the monster then add role

[@Mig1_910]

@@theRCLman ok thanks!, btw, how do u make the monsters make noise? I’m only new and just learning so I do need some help.

[@theRCLman]

You need to attach a sampler or audio player to the look at also

[@godzillafan5977]

OK we have walking animation what about running animation

[@Pixelgun780]

The following gizmo will not attach to my monster

[@theRCLman]

hmmmm

[@Iamlitarllykira]

center pivot points is not showing up for me

[@theRCLman]

Are you editing the shape?

[@wafflesrverygood]

Mine broke when i saved :(

[@Vest.21]

How to make a slide?

[@theRCLman]

my guess is impulse volume, ill look

[@righx3996]

Why does my guy break whenever I go in a public room?

[@theRCLman]

Hmmmm break how?

[@righx3996]

Why doesn’t my monster move when I press the button? It just looks at me

[@theRCLman]

If you are animating make sure your animation gizmo is on, if its not on it won't follow, change the 0 to1

[@righx3996]

@@theRCLman it might be a problem with the room cuz it works fine when I’m not in my room. Any advice?

[@zocker_meister_111]

​@@righx3996just make a cop and use it there

[@danik9261]

the max frames is 50, Any way to add more ?

[@theRCLman]

not that i know of, i didn't even know there was a limit, you probably have to get a new animation gizmo and make it play just after the 1st one is done

[@danik9261]

@@theRCLman i already have both of my animation gizmos done throughout the whole map. How do i play 1 after another?

[@i_just_craft]

I feel a little dumb asking this question but I did it all and its not following me 😅

[@theRCLman]

Make sure the animation is on and the modify with circuits is on

[@NotEvenFunnyVR]

Can you make ai like ignited Freddy and poppy playtime

[@theRCLman]

I wanted to but i have run into an issue

[@nerdygeek9865]

It’s Coming Soon Y’all!

[@theRCLman]

Lol

[@KaboomEpic]

Yesssss

[@theRCLman]

:)

[@kathybailey1733]

This I understand 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

[@theRCLman]

glad it helped :)

[@tatami58]

Why does it turn upside down why I attach it I need help

[@theRCLman]

You may have your pivot point flipped

[@Cheezlr]

how do i make it go faster

[@theRCLman]

Change the blue numbers

[@Qwerty_Robloxplayer]

Mine don't move it just looks

[@theRCLman]

this video is just for animation not moving or following

[@Tiny_Drummingkid]

What did I do wrong? my person flying to me

[@theRCLman]

hmmmm i guess turn it off while animating

[@i_play_games962]

Where is world space?

[@theRCLman]

Open maker pen go to tools then in top right should see a slider

[@kimberlyphillips2213]

Is bob the god!

[@theRCLman]

Maybe

[@Speed-TV]

I know

[@TKcopYT]

For me there no tumbnail

[@theRCLman]

You right, since my computer died last night i was unable to make thumbnail but i knew people were waiting for this vid so i put it out rather than delay

[@EggoMcWaffle]

i know the guy who made the glamrock freddy lol

[@theRCLman]

Word

[@Aplooloo1]

Barry horror game

[@theRCLman]

ignited barry?

[@Aplooloo1]

No way

[@Sam-ku1cs]

Anybody else having the problem where the look at gizmo is not following you?

[@theRCLman]

do you have the role, is the 0 on the look at changes to a 1? did you set the role on the look at gizmo? its also entirely possible that RR broke it

[@Sam-ku1cs]

@@theRCLman I used the invention for it and it all those are completed I have used the same invention for the other monsters used in our room but we added another room and for some reason it’s not working.

[@kathybailey1733]

👍🏻

[@theRCLman]

:)

[@pond167ferrous8]

First my brother now give me- wait a damn minute didnt u said ur pc Does not work????

[@theRCLman]

OMG My gf did some research and we tried something and it seems to be working now, lets hope it stays that way :)

[@pond167ferrous8]

@@theRCLman YAYAYAYAYAYYAYAYAYAAYAY SAY THIS TO UR gf ur Genius

[@MannyThealpha]

It dosent want to show up

[@theRCLman]

They have since changed it when you try to edit a new menu should come up 😔 n the bottom of your maker pen

[@VenyxIGuess]

I did that before the tutorial was a thing also in the future combined the jumpscare make it stop to play jumpscare then walking and can run and same ai for RCL NPC 4

[@DeanMills141]

I try to use the invention you made but the monster dosent move

[@theRCLman]

save the room first

[@DeanMills141]

@@theRCLman thank you👍