There's Zero Valve Lash on my Holden 308 - Wrong Pushrods?

  Рет қаралды 747

Stace on Wheels

Stace on Wheels

Күн бұрын

Пікірлер: 20
@LoBelly
@LoBelly 3 ай бұрын
Hi Stace - thanks for your video I think pre-buying pushrods is a bit of a lesson that everyone has to learn it is much better to wait until you can put everything together and then measure the length you need Can I suggest that you set the adjusters on the rockers to the middle of their range and then use the mid-lift method to get the correct push rod length Good luck - have fun will look forward to your next video 👍👍
@staceonwheels
@staceonwheels 3 ай бұрын
Thank you, and yes, what a lesson. The pushrods came as part of my cam kit, which was supposed to save a bit of money, but now costs more! 😂 Yep, I ended up setting the adjusters mid way to get a better pushrod length... then there's the trick of how to measure a pushrod's length...
@Shanes_Shed
@Shanes_Shed 3 ай бұрын
Expert knife flick😂
@staceonwheels
@staceonwheels 3 ай бұрын
🤣🤣🤣
@westaussie3346
@westaussie3346 2 ай бұрын
Great videos. Try putting the lifters in a container of oil and leave overnight and they will prime
@staceonwheels
@staceonwheels 2 ай бұрын
Thank you! I had left them in oil for longer than that, but it seems maybe they'll only truly prime with oil pressure? Not to worry, I'll soak them all for a week, likely, before final assembly.
@index6738
@index6738 Ай бұрын
Recall Holden head valve seat grinds sat valves at different heights. Very obvious when place straight edge over tips valve stems. Other influences push rod travel reground cam, shaved head and block mating surfaces.
@staceonwheels
@staceonwheels Ай бұрын
Good info thanks. I had the intake seats cleaned up and the exhaust seats are new for unleaded. And did the straight edge trick. I reckon it's a combo of the rest you mentioned.
@stevencrane2053
@stevencrane2053 4 ай бұрын
Thank you 👍
@stevencrane2053
@stevencrane2053 4 ай бұрын
Keep up the great work 👍 👏 💪 👌
@staceonwheels
@staceonwheels 4 ай бұрын
Lots of chances to learn things I never expected, on account of the little problems along the way. Fun, though.
@stevencrane2053
@stevencrane2053 4 ай бұрын
@@staceonwheels I'm going to put a 253 in my HG kingswood ute .
@staceonwheels
@staceonwheels 4 ай бұрын
Noice. Are you rebuilding it yourself?
@stevencrane2053
@stevencrane2053 4 ай бұрын
@staceonwheels I might just put the v8 in and hope it's OK. The ute is getting a complete makeover, which I'll be doing all the work myself.
@staceonwheels
@staceonwheels 4 ай бұрын
Enjoy and good luck with your 253.
@captainolaf
@captainolaf 3 ай бұрын
im a newbie but was wondering if the valve seat made the extra play "? say if there was a variation in depth taken during valve grind?
@staceonwheels
@staceonwheels 3 ай бұрын
That's certainly a factor. The valve seats were professionally machined, with new valves, so the valve stems could be sitting higher and tipping the rocker arms more over the pushrods, giving less freeplay... 🤔
@captainolaf
@captainolaf 3 ай бұрын
@@staceonwheels cheers im finding your vids helpful as i start my rebuild on an early 253
@SuperSpannerX1
@SuperSpannerX1 4 ай бұрын
Stace Why Do I Get The Feeling You Have Inherited A Mix-Match Engine And That's Why Nothing Works ???
@staceonwheels
@staceonwheels 4 ай бұрын
Very interesting idea... it was running before I started messing with it! Personally I feel like it's just small variabilities in each component, adding up rather than cancelling each other out.
replace valve stem seals - with cylinder head on
10:04
Kevin Scott
Рет қаралды 561 М.
Увеличили моцареллу для @Lorenzo.bagnati
00:48
Кушать Хочу
Рет қаралды 8 МЛН
Players vs Pitch 🤯
00:26
LE FOOT EN VIDÉO
Рет қаралды 134 МЛН
The IMPOSSIBLE Puzzle..
00:55
Stokes Twins
Рет қаралды 169 МЛН
Long Nails 💅🏻 #shorts
00:50
Mr DegrEE
Рет қаралды 14 МЛН
Everything about Engine Valves
13:01
How a Car Works
Рет қаралды 311 М.
HOW TO REBORE AND HONE AN ENGINE BLOCK *Step By Step*
25:14
George Austers
Рет қаралды 31 М.
Zero Valve Lash Solved! New Pushrods & Shims For My Holden 308
12:50
Stace on Wheels
Рет қаралды 2,8 М.
RENAULT 5 GT TURBO - Engine Rebuild 3 - Head, Cam, Timing
11:30
Renault5Rebuild
Рет қаралды 1 М.
Update on the Holden 308 and Piston-Valve Clearance Check
7:06
Stace on Wheels
Рет қаралды 1,5 М.
How to tell if you have wrong valve clearance
9:53
The AbJ Garage
Рет қаралды 39 М.
Which Carburettor is best for the Holden 308 Street car???
12:41
Changing a Faulty Temperature Sensor on a Ducati SuperSport 939
10:31
Разгон кибертрака до 100 км/ч #shorts
0:38
auto_shorts_everyday
Рет қаралды 920 М.
😯ПЕРЕКУП ПРОДАЕТ АВТО!
0:18
АВТОПУЛЬС
Рет қаралды 3,3 МЛН
ВЕЛОРЕМОНТНАЯ СТАНЦИЯ ☠️
0:19
Леха МАК
Рет қаралды 3,6 МЛН