🔧 These HIDDEN Nvidia SETTINGS gain upto 25% MORE FPS & Lower INPUT latency! ✅

Use SECRET Nvidia Settings in 2022👍 25% discount code for software: PAN20
Windows 10 Pro OEM Key (16.5$): biitt.ly/KVEYh
Office 2019 Pro Plus Key (45.8$): biitt.ly/Sul3E
Windows 10 pro +Office 2019 (60.1$):biitt.ly/TowHc
Windows 11 Home OEM Key( 21.1$ )：biitt.ly/pbz6f
Thanks for mediamz for sponsoring todays video!
How To Increase fps in any game using the best nvidia control panel settings & hidden nvidia settings - this works on almost all nvidia GTX and RTX cards no matter how high or low end! - offering fps boost for nvidia GPUs in most games for increase fps and less fps stuttering
Lets try for 5000+ Likes! 👍 For this Extremely helpful tutorial?! Do your part and hit "Like" now! Lag Fix + FPS Drop fix included! and feel free to suggest more & Subscribe! ✔️
This video will teach you how to setup and use the hidden nvidia settings and options to increase fps in pc games and best nvidia control settings 2022, for GPU fps boost, stuttering pc, fps boost all in this video! GPU settings / best Graphics card settings also teaching you how to properly setup G-SYNC or fixed refresh for YOUR use case in windows 10 & windows 11, fix fps stutter in all games using nvidia control panel and nvidia profile inspector - featuring the, best nvidia control panel settings for gaming in 2022 and nvidia settings 2022
#increasefps #optimizefps #windows11key
🔽 All links to follow along with this video are below 🔽
📌 Patreon - / panjno
📍 Prefer Shorter Content? 📍
Check out the 2nd channel! Same content, cut down into small bite size videos
Panj2 Here: kzbin.info/door/FnS...
🔗🔹Tools, Software and configs to use!🔹🔗
▫️ Nvidia GPU Drivers: www.geforce.com/drivers
▫️ Nvidia Profile Inspector: github.com/Orbmu2k/nvidiaProf...
▫️ MSIutility: forums.guru3d.com/threads/win...
▶️Other extremely helpful & Effective Optimization guides to follow ▶️
🔸 How To CLEAN Install GPU drivers for major FPS boosts & fix fps stuttering!
• 🔧 You NEED to be insta...
🔸 How To CLEAR ALL Cache in windows 10, 8, 7!
• 🔧 How to CLEAR All Cac...
🔸 How To Clear UPTO 30GB+ Diskspace Quickly & Easily!
• 🔧 How to FREE Up More ...
🔸 Ultimate Guide to Improve Performance in windows 10
• 🔧 How to Optimize Wind...
🔸 Ultimate GPU Overclocking Guide:
• 🔧 How To Overclock You...
🔸 nVidia Geforce Best Settings Guide:
• 🔧 How to Optimize Nvid...
🔸 AMD/Radeon Best Settings Guide:
• 🔧 How to Optimize AMD ...
🔸 Ultimate GPU Overclocking Guide:
• 🔧 How To Overclock You...
🔸 Ultimate Guide to Improve Performance in windows 10
• 🔧 How to Optimize Wind...
🔸 nVidia Geforce Best Settings Guide:
• 🔧 How to Optimize Nvid...
🔸 AMD/Radeon Best Settings Guide:
• 🔧 How to Optimize AMD ...
Timecodes:
0:00 - Intro (What performance gains can be had?)
1:05 - Setting up Nvidia Control panel settings (G-sync on OR off)
2:32 - Quick Performance boost in nvidia control panel
5:12 - Getting Nvidia Profile inspector (to use hidden settings)
5:42 - Setting up Nvidia Profile inspector HIDDEN settings
8:15 - How to FORCE Resizable BAR on ANY GAME (RTX GPUs only)
11:16 - Quick Optimization to LOWER input latency (ALL GPUs)
12:23 - Benchmarks (Before & After in 4 Games)
13:45 - Outro
Disclaimer:
Due to factors beyond the control of Panjno/Panjnotutorials, I cannot guarantee against improper use or unauthorized modifications of this information. Panjno / Panjnotutorials assumes no liability for property damage or loss of data as a result of any of the information contained in this video. Use this information at your own risk. Due to factors beyond the control of Panjno, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, programs, or from the information contained in this video is the sole responsibility of the user and not Panjno.

[@heytheregamers8721]

Thanks again for including benchmarks at the end !!

[@ccnt89]

Im a long time gamer. Gaming since 1985. I must say these settings are great and Although I have tweaked Nvidia Inspector I didn’t know about the other settings. Well done sir 👏

[@rocha1001]

can you share ur inspector profile sir?

[@EricTheBroBean]

Maybe some good tips but, could you please ellaborate what some of the settings actually do when changing them, and why you are changing them?

[@EricTheBroBean]

Sorry my question is: In nvidia control panel i set maximum performance on power management mode on games, should i do the same with wcm and explorer? Or should i set them to the same setting i use globally, which is optimal power?

[@axelanderson2030]

Most of them do little to nothing. For example, disabling force p2 cuda states only applies to cuda compute workloads, and do not effect gaming in the slightest. All you need to do is fresh install Nvidia drivers, set prefer maximum performance and bloat windows if you really want to get more (an extremely marginal amount) performance. The best way to improve FPS is by turning down settings or overclocking. If you have a laptop or a PC more than 6 months old you might also want to clean out the dust. laptops get too hot already, and when a CPU or gpu gets too hot, it slows itself down to avoid burning up. Therefore, making sure your rig doesnt get too hot will actually make an effect

[@EricTheBroBean]

@@axelanderson2030 Yup i know all that but thanks for the tip anyway:) I was more looking for a quick technical explanation when changing some of the advanced setting. My rig is overclocked on a OC card with no bloatware, backgroundservices, and a set of regedits and performance adjustments i usually do when configuring my pc. But some changes you make can cause instability if you blindly follow a performanceguide and you've already made your own adjustments. What overrides what, what depends on what and so on..

[@axelanderson2030]

@@EricTheBroBean Most of these do nothing

[@griffin1366]

People want short / tell me what to do videos, not lengthy videos... There was one guy that did full Windows guides for gaming etc. and explained every single little detail but his videos were 2-4 hours long and most of the comments were people complaining about the length, but then others praising it as well.

[@Heisenburg999]

i love when you upload so i can apply all these tweaks to my system and get a nice performance increase thank you panjno

[@lenwe5530]

Thank you Chris. I really appreciate it and that was exactly what I was trying to do. No fuss and helping people get on with what they need

[@WarpRulez]

NOTE: If you set the "Power management mode" setting in the Nvidia panel to "prefer maximum performance", the clockrate of your GPU will never go down, even on idle, and your GPU will consume significantly more power at all times, even when you are just on the desktop doing nothing. For example, my RTX card consumes over 90W at minimum at all times if the setting is "prefer maximum performance". If I set it to "normal" then it consumes less than 20W when nothing particularly heavy is being displayed. As a side consequence the PC was running hotter than usual as well, which made fans spin faster, increasing noise. If you change these settings you should monitor your GPU power consumption (especially when you are not running any graphical programs), and make a decision on whether the significantly increased power consumption is something you want to afford.

[@jedenzet]

True. Use "Max Performance" only for specific aplications like games.

[@WarpRulez]

@@jedenzet Do you have any evidence that the GPU is slower in games when using the "power management mode" setting?

[@WarpRulez]

@@chy.0190 There isn't what, exactly? And what makes no difference, and to what?

[@GregoryShtevensh]

I found this isnt the case with the 2070 super, but is the case with the RTX 4080. The 2070 super would clock down even on max power settings. With the 4080 I need "Normal" power settings in NVCP and Balanced power settings in windows (as opposed to High performance)

[@IchigoMait]

In some games optimal or adaptive will bork the game fps, because the game when unpaused will act like it's idling, and the gpu will go into idle mode, but is fixed with prefer maximum performance mode. Try it with Warriors Orochi 4.

[@kennethruiz3263]

This video is 8 months old, pre 22h2 update. The section where you add the explorer application and dwm application can no longer be changed as it always reverts back to nvidia recommended settings, even if you set the global settings to performance mode. Windows has locked out the ability to change this setting apparently.

[@InternalxHD]

Wrong, still works fine after after 22h2 Although 21h2 is still the best windows

[@derisathartfelt5293]

Absolute legend, this video not only got saved underneath my guides tab. It got me to subscribe. My 3060, was chugging on cyber punk at 40 frames, 1080p. And now it's at a locked 60. Running on high graphics with RTX off thank you. My thousand mods in Skyrim is even better. Allowing me to increase my LOD without losing performance

[@redbloodedamerican2346]

Wow I get better than that with a 1660 ti. But on FS22 I have to run low settings and can only stay at around 30 fps without jumping all over the place.

[@InnerHacking]

Even with a GTX1050ti and a 60hz 1080p monitor I notice something is different after going through these settings. Games are definitely more snappy, I guess the input lag is lower. I didn't have any GSYNC option to select on my Nvidia control panel and that discouraged me from the start, but I found it on the Nvidia Profile Inspector and did what's recommended. I can't disable Vsync either or else I start seeing jarred lines with my 60hz monitor and that's awful, I was also discouraged because of that but I went for Vsync enabled at Fast setting instead. Thanks for this video, it helped and now you're on my GOAT list after I went through your other video too!

[@xenaisu]

That's because if you don't have a G-SYNC monitor it will not show you that option. Thankfully you stuck to the end of the video.

[@2bussy]

g-sync doesn't cause input lag my dude, that's kind of the entire point of having a VRR monitor. as long as your framerate stays beneath your refresh rate, you'll never experience the typical v-sync input lag. I have an ASUS VG248QG and g-sync has changed my life.

[@oxfordking]

HUGE thanks! Great Video brotha! Seriously, The REBAR Setting alone was pure gold. Thank you!

[@Shehzada-e-tharki]

Your tweak actually works & not only my PC has become snappy but I'm also getting higher fps. Thanks!!!

[@majorgear1021]

If you don't have "monitor technology" in 3D settings, you may need to enable it in your monitor settings. For my Samsung G49, I had to enable "adaptive sync" in the Game tab before "monitor technology" appeared in the control panel.

[@y_zass]

This is such a true statement! It pains me to think of all the people running FreeSync/Gsync monitors but don't even know enough about the technology to make sure that it is actually enabled. I don't think it was on by default on my monitor either, I have the Monoprice DM 27" 1440p 180hz (165hz w/ Adaptive Sync) IGZO-IPS. If I hadn't enabled it in my monitor settings and then in the Nvidia control panel, it would not be working. It is also a 10-bit monitor and the Nvidia control panel (resolution settings) default to 8-bit, I had to change it manually. Another miss by many, a lot of people out there running 10-bit panels at 8-bit. Not as big as deal as not enabling Gsync/Freesync but still...

[@-bizzle]

Does enabling g sync cause higher input latency though? Specially controllers?

[@tobeeras]

Where to find this option in monitor settings?

[@nicholascher960]

@@y_zass some monitors will tell you on display if you simply press a button lol

[@scroogemcduck3003]

After making these changes i was getting some screen tearing with gsync enabled on elden ring, I've changed back the vsync in nvidia inspector to on and it's nice and smooth again. Cheers

[@andersfiltenborgjensen1266]

I also noticed some screen tearing, with vsync off, i have set mine to fast because, if i just set it to ON, i get 138fps, 6fps lower then my 144hz monitor, i also changed Vsync tear control to Adaptive, inside the profile inspector, it seems like i get a little higher fps that way..

[@vladshad0w882]

If you’re using Gsync the key is to have vsync enabled and low latency mode set to ultra in the nvidia settings with vsync disabled in-game.

[@ausdemo749]

absolutely amazing differnce in load times and response times, subbed,belled and well earned tyvm

[@maltebay8135]

My computer says it has ReBar enabled but when i look in the inspector I cannot find F00FF or the other ones even with the magnifier on

[@MohamadJarkas84]

I have seen many videos, but honestly you are the best ever… keep it up 👏🏽

[@m.abdullahejaz3730]

About 4 years ago i used to watch your videos to get the extra juice out of my gtx 660 by tweaking it, it was a founders edition. i also overlocked it by watching your video. It lasted me 2 whole years and i bought it used. Such good days, from fallout 4 to AC odyssey, i played every dream game on it. Those days are gone now

[@Axxxel_in_Harlem]

What happened to it?

[@theultimatechadd3930]

What happened to it

[@ShinGio]

Feel like the benchmarks could've been better. Since we're looking for more FPS testing them on popular multiplayer games such as Warzone, Valorant, and playing a actual match on Apex would be a good start to understanding how these optimizations would help in real use cases. Would also be nice to see the performance difference of the GTX 1060 since that's usually the main card most users have according to steam and have that alongside with the 3080Ti you have so we get a sense of how much of a difference each generation gets. Overall good video

[@-The-Golden-God-]

Shhh don't point out obvious stuff like that, just click the affiliate links

[@navox933]

No, since Benchmarks are made for test and provide way more reliable data. Just take the delta and you roughly have your answer.

[@ShinGio]

@@navox933 training mode on apex isn't a reliable benchmark.

[@infinite7620]

I use a gtx 970m and based on my optimizations, including this guides modifications to my nvidia settings, I am getting a solid 200-300 fps. My input latency has lowered significantly . My frames have boosted very significantly. Using high low high very high on CSgo, 8x antialiasing at 1920x1080 res. Overall I am quite pleased after perm disabling gsync and vsync on my pc. Previously I was at a steady 120fps and not nearly as reactive interms of input as I am currently, after using this guide. My pc overall is an alienware 15 r2 (2015-2016) and it feels like it’s running like a full sized desktop.also, this isn’t my first go at optimizing my pc. I’ve tried almost everything for 6 months on a consistent basis on the notion of researching and looking for a way to be operating at maximum performance. This is also the day, where I am locking in my settings for good. If you have a much more powerful system than I have, you will be exceptionally pleased with this gsync vsync global disablement. Hope this helps understand the impact of the guide here boys!(and girls)

[@fullclip_nz]

Hi, i currently run a rtx 1060 6gb, upgrading to a 3080 in the next week, if you remind me ill link you the difference.... currently i get a stable capped 105 fps in apex, un capped it goes up and down 40fps on top of that

[@iNicholasY]

This helped me alot I have 2gb graphics card on warzone I was having 30-40 fps now since I've done these settings I'm having between 46-60fps now thanks alot bro

[@Avarthas]

Dude you gave me 10 to 16% fps improvement for free. This isn't just your average clickbait "make your pc faster" channel, but many of your videos did wonders for me. Really appreciate it! Cheers

[@griffin1366]

Oh no

[@Yinzzy656]

also prob have your energy bill more $

[@yeetman9025]

Hey Nice Video Panjno! Btw Panjno , Can you Do Apex Season 12 Optimization Guide maybe? Thanks in Advance Man! :D

[@rando_bacon]

Wow great job! I had no idea there was an Nvidia profile management program you could DL to further customize your settings.

[@peakyblinder7821]

Panjo you are GOAT, i just gain 20% on my RTX2060 in FPS, and i dont know is it because of these new settings, but my latency drop about 10-15%. Thank you, thank you, thank you.

[@_xewo_9856]

Excellent optimization but there is one thing that is avoidable ... the "global setting" power mode leave it in "normal" otherwise you will have the GPU with fixed clocks at maximum and an exaggerated consumption on the desktop ... take the programs one by one (the ones you use) in my case Cod Warzone and Apex and give it "Maximum Performance"

[@melih.ozturk]

bro you for cod pre-rendered frames 1 or 3d application using?

[@_xewo_9856]

@@melih.ozturk prerender 1 for all app

[@melih.ozturk]

@@_xewo_9856 dude, is this setting the same as low latency in nvidia control panel? I use it as "off" there?

[@oliizagamer]

Do you have a source for this info? Would like some 2nd opinions before trying :) Also i dont have "Normal" as an option, only Adaptive, Maximum Performance , Consistent and Optimal Power.

[@andersfiltenborgjensen1266]

I have set the global power mode back to normal, but my clock speed still runs high all the time, i thnk its the msi utility v3 there are making it do that, but now it wont give me permisson to enter the MSI utilityv3 or v2.. I dont know what to do??

[@amirclev8213]

Thank you for the video, it's very useful. At 09:10 you accidentally changed the Memory Allocation Policy option to Intergraph ISSD.

[@1DeleterX1]

This is great, my FPS now are stable and fluid 70-95fps in my 10 years old PC in World of tanks (low settings) (GTX 750ti 2gb GDDR5 - AMD Phenom 2 X6 1055T) before this guide my game was 95-140fps but sometimes freezes or loses WHUGE fps from nowhere and sometimes looked weird and took some time to recover the fps, now its looks better and and more fluis animation and explotions, thanks. Sorry for my average english.

[@cannanabis4555]

i am suprised how smooth some games running now, i didnt have fps problem in 1080p (gtx 1660 TI, i5 10600k) but after this guide(only power is set to optimal usage), all tested games work much smoother, even in nfs heat car is more responsive at higher speeds, wonderfull guide, and be blessed bro, thank you.

[@thq4941]

No other tips sorry. As feedback though followed a number of your previous videos and got great results with an i7 8700k and a RTX 3070 so I wasn't expecting anything much for CSGO. I was wrong though feels way more responsive, less input lag I guess as well as 20 - 30 more FPS. Thank you. 1440p 144Hz.

[@JacovanRensburg]

Awesome tutorial, I definitely gained about 20FPS on my 1080Ti. Thank you

[@kryptopcgamer589]

Lol!

[@rdCORE]

Just went through a whole hour figuring out how to convert from mbr to gpt, so i can enable rebar. managed it in the end without having to reinstall OS :)

[@fullclip_nz]

nice video, only thing i add extra is rivatuner for frame rate timing, particulary on apex legends. found my average stable frame rate in game, then capped riva tuner at that rate - what does is give you stable frame rate timing. ie. its better to have 100 frames consistently than have an uncapped frame rate that constantly jumps from say 100 to 130. For aiming purposes

[@Panjno]

Hidden Nvidia Settings & Optimizations for IMPROVING FPS upto 25% & Lowering INPUT LAG! Let me know what games you will be trying these out on and what your results are - and if you have any other tips/settings to try!

[@M7_MD1]

Hey panj there is no Prefer maximum performance 4:05 , there's only NVIDIA recommended and Use Global setting which is prefer maximum performance but when I click it and hit apply it reverts back to NVIDIA recommended please help.

[@brawlstars-ss6rw]

@@M7_MD1 yea i got the same result

[@M7_MD1]

@@brawlstars-ss6rw I'm guessing its because that he's on windows 11.

[@riadazemi2005]

@@brawlstars-ss6rw i have the option i dont know why you dont have it

[@ADYNLYFTS]

@@M7_MD1 im on windows 11 and im having the same issue

[@tr4ck3r19]

Would've loved to see the benchmark part using the 1060 instead of the 3080Ti.

[@privatbruker5905]

1060 who still uses that? thats probly older then 99% of his viewers....

[@tr4ck3r19]

@@privatbruker5905 I said that to actually see the difference it makes for low budget gpus, and according to steam; the 1060 is till the most popular GPU to date. So yea the majority of gamers still use that card. :)

[@xiao.100rl7]

@@tr4ck3r19 i have a 1050 ti but i get 400-600 stable so im chilling

[@tr4ck3r19]

@@xiao.100rl7 Enjoy gaming my budd, as long as the card fits your needs enjoy it, that's all that matters

[@0ctober561]

@@privatbruker5905 surprisingly a lot of ppl do have a 1060-1080ti

[@thatdoofus4529]

Changing the power level of Explorer was actually genius. I thought of it a few times but never knew how to do it.

[@indiaarmy8689]

back in and recently got soft soft again, it felt strange and i had previously just taught myself the software. Finding your videos is helping

[@boobax85]

Thank you for your tips, some were kinda new for me (force resize bar, didnt try it yet on PUBG, typically a game with some heavy frame drops in late game...). Besides, I wanted to know if you experienced, with softwares like "latencyMon", how much latency your PC get with the "option" selected on "Kernel mode". I can not get rid of 12ms of global latency generated by the Nvidia drivers and windows Kernel ... (win 11 pro, 3080ti, 10900k, Asus Formula XII) except when I run some very specific softwares locking my global system latency to 1 or 0.5 ms. Anyway, concerning tips and more. What are your insights about the registery edit between FSE (full screen exclusive) vs FSO (Full screen optimized) in different kind of games ? I've noticed a considerable smoother, inputlag free, experience while gaming as well as some FPS gained in certain titles in FSE (which isnt the default mode on win 10/11 since the 20H2 patch or earlier, FSO has been pushed and forced on our computers). You can also force the FSE by just right clicking on the game "exe" file > properties > compatibility tab > then check the box "disable optimization of full screen ...". Basically turning FSO off, you are forcing your game to run in FSE which is the old fashioned REAL full screen mode GPU output TO Monitor directly, without getting handled and manage by the WMD windows process allocating ressources to your games and other process (that is the principle of FSO, the game is in a "fake" full screen mode, in order to integrate and manage better many overlays and other processes while you are running a game). This is the choice between hardcore gaming with a single monitor, w/o overlays, and minimum processes to play with the highest fps and fastest responses times in competitive games ! A second PC is needed to do the rest then : streaming, monitoring, webcam, obs, streamdeck etc ... Sorry for the long post and thank you again @Panjno

[@thomasknight-wagener6630]

if you have a good rtx card you can use the onboard gpu encoder to stream on the same pc with no downside

[@boobax85]

@@thomasknight-wagener6630 I do, 3080Ti FTW3 ultra, I stream since 2014... So i've tried all the codec/preset existing on the planet so far... and believe me, when you stream competitively with your GPU in Nvenc, you instantly feel an input lag and some frame loss, far from dramatic but very perceptible for people like me ... Especially with a 270 hz monitor, any stutter, flicker or input lag is felt as if the mouse is getting delayed because of a weight (my perception... My wife doesnt feel anything for instance). If you stream for casual games or even without a perfectionist mindset, you can indeed use your GPU as a encoder, most of ppl do, but most of comeptitve or pro players are using a streaming PC for this purpose, relaesing the Main PC from every heavy tasks as much as possible, letting it run in maximum performance, while the second PC, is handling the rest (OBS, monitoring, Cam etc, Chrome, chat, Java etc ...)

[@Globespy]

Running Global NVCP power at 'Prefer maximum performance' is awful advice - it will cause the GPU to constantly run at full boost clock speed even when not gaming. No need for max boost browsing websites or explorer windows. More heat, GPU fans constantly running for absolutely no reason - leave at 'normal' and change to 'prefer max performance' per game/app profile.

[@laurosalvatore8900]

Idk what are you talking about, I have that setting enabled and my GPU keeps running at minimum power unless I open a game.

[@poko60]

He said you can either keep it at optimal or max performance. In PC's it hardly matters because heat and power issues are nonexistent.

[@ronniecantiga5629]

@Globespy my advice is learn how to read.

[@accuretti]

Don't know if anyone already mentioned this, but the RBAR settings have been renamed to "rBar - Feature", "rBar - Options" and "rBar - Size Limit" under the "COMMON" section.

[@cwj7253]

thanks for this

[@leneanderthalien]

this is a damn fast explanation, very hard to follow for a non english talking guy like me (did learn a bit english on internet...)...But after testing from the settings on Fallout 76, the performance improvement is realy impressive, my system is 10 years old: Windows 10, i7 860 overclocked to 3,5Ghz, 8Go RAM,graphic card Nvidia GTX980 6Go, 1Go Velociraptor: tank you for your expertise!

[@juzonya7245]

There was a lot of information to fit into a small time frame. I do agree that it was hard to follow. It wasn't possible for me to play it in the background and follow along as he talks about the optimizations. Instead, I was constantly pausing--taking it step by step. Nonetheless, I think it offered great information and was worth going through the hassle

[@lucamatteobarbieri2493]

Back in the day I used to open a command terminal at boot instead of the win user logon screen (by switching a few files and suspending some processes). Than I would start games and tools from the terminal. It gived me a good 25% framerate boost, compared from starting games after logging in. There are legal and security problems doing anyways, so I wont advise it or give any specific info. Just so you know it is doable and effective.

[@M3PH11]

in windows 7 you could replace the accessibilty options tool on the logon screen (the executable for it) with a copy of cmd.exe and then just click the accessibilty options icon and voila, instant commnd prompt.

[@lucamatteobarbieri2493]

@@M3PH11 yeah but afaik you cannot do it within the running windows system: To do it you must boot from another windows installation, or a live cd, or a Linux distro etc.(to be allowed to swap files)

[@lucamatteobarbieri2493]

there are also processes of windows you can suspend to avoid slowdowns

[@M3PH11]

@@lucamatteobarbieri2493 I actually did it on a live system once and only once

[@jamessimmons8352]

Question... Are these changes applicable to VR Headset users, or just Display monitors. Just want to confirm before I try any of these changes. I'm tuning for VR performance at the moment.

[@dawnbreakerii204]

Outstanding, never seen any video with these kinds of optimizations, you also were very quick, and very straightforward with instructions and details, thank you.

[@4MENOO]

Thanks bro finally someone who isn't posting malware or fake stuff, you deserve my subscribe!

[@jenusi001]

There is a new Option for rBAR in the common section in the NVIDIA Profile Inspector, you'll have to enable rBAR - Feature, rBAR - Options and rBAR - Size Limit to the one with the most games.

[@nicchang427]

thanks for the heads up on that! When i go to the "unknown" section, F00BA, F00BB, and F00FF do not show. Any idea why that might be and/or know how I might be able to get those options to show so I can change them?

[@jenusi001]

@@nicchang427 It isn't in the unknown section, it's in the section called: "common". For the rest, just follow what I said in my other comment.

[@nicchang427]

@@jenusi001 well I'm in profile inspector right now and in the "common section the F00B settings aren't there and in the "unknown" section they aren't there either. I found the rebar settings though

[@jenusi001]

@@nicchang427 Follow the Main Comment: You'll have to enable rBAR - Feature, rBAR - Options and rBAR - Size Limit to the one with the most games.

[@nicchang427]

@@jenusi001 but I already have and I still don't get anything

[@zombieassaultteam7619]

Straitened out my problem with artifacts. Looks great gaming at 4k 60 fps. Thanks panjno

[@Panjno]

lovely! - what game was artifacting?

[@abelmusic9355]

Answer the man, im curious too..

[@Faebyte]

ANSWER

[@Bonusdadnr1]

Hey! Thx for the video,ive applied the settings and my rog gtx 1080 runs super smooth in all game now 😀

[@_shxdow_1]

I love you panjno 💙 tysmmmm for making these vids

[@chungisyoung4good]

Most of that performance gain is probably just turning on rebar. Hard to say if any of those tweaks really did anything. Would like to see another test where rebar is out of the equation, either being on at all times or off completely.

[@lucal7756]

Indeed. Most of the things suggested (especially Explorer, WDM etc... at the beginning) are useless placebo users shouldn't mess with. The only thing that really makes sense in this video is forcing Rebar (for some games only) boost. In general, hidden NVPI settings instead can effectively be used to remove stuttering and improve smoothness with some unoptimized games with hitches and the like (especially Unity or UE4 buggy games...), not to increase fps, but this is another story and must be set per game. I've fixed many known to be (micro)stuttering for everybody and now running smoothly with some custom tweaks from NVPI.

[@theflower2567]

@@lucal7756 what is NVPI settings?

[@markjacobs1086]

The power settings definitely give unnecessary high clocks on the GPU when idling together with more noise from the cooling (and screentearing if you previously used G-sync/Freesync) 🤡

[@M3PH11]

By the end of the video, if you were paying attention you would have noticed that he has a 5900X and 1060 3GB. He is so GPU limited he could set the MSI priority to infinity and probably get a 0.1% gain. The problem is you do that on a normal person rig that is a few years old and not GPU limited, it's gonna do the opposite and do a lot more than 0.1% damage to your performance. Also most of the settings are available in the regular NVCP, so downloading all this unknown trid party crap is a waste of time. Turning off G-sync isn;t that much of an issue if you have a computer that can easily pump out enough frames to satisfy a static refresh rate screen.

[@blacknemesy]

@@M3PH11 G-Sync or any VRR option provides a more constant experience in ANY SITUATION otherwise the constant change in responsiveness is a problem on it's own followed by screen tearing due to monitor and gpu starting to mix and mismatch frame, waiting for the frame to fully render prevents another from rendering halfway through the first to prevent tearing. The gains came from ReBar and disabling anisotropic filtering(which makes everything look like a low res texture).

[@JuvieeG]

Your videos are goated ever since I got my 3080 I’ve been watching all your videos on optimizing and they work so good . Keep at it fam

[@krisallen6730]

Great vid, also watched your smooth FPS video. Which should I do first the tips in this video then the FPS cap video or the other way around

[@Smile-eq9vk]

I love it, thank you so much for this!

[@NotSweetland]

When applying maximum performance for power management mode it doesn’t stick on either thing.

[@tg-s9061]

Same here

[@Nahres]

same for me aswell

[@MrCrunch215]

Here’s what to do change the setting then just exit out the control panel…. It’s gonna say do u wish to apply the changes u made click yes! After that restart ur pc then open the control panel up and it should be changed

[@Nahres]

@@MrCrunch215 thank you buddy this worked

[@NotSweetland]

@@MrCrunch215 TY that worked lol restarted it after I did it but never went back to check lol just checked it’s it’s on prefer maximum

[@MavVvius]

You should warn people about OC'ed cards. Actually CUDA P2 States Off will slightly push clocks higher, for me it was 200Mhz on memory clock and that made my card (2060 super) unstable

[@melih.ozturk]

Bro i have rtx 2070 armor my gpu overclocked, What should I do with this setting? no problem now?

[@MavVvius]

@@melih.ozturk Just leave this option "On", that's what i did :)

[@melih.ozturk]

@@MavVvius I have no problem with it turned off, should I still leave it on because you are gpu oc?

[@MavVvius]

@@melih.ozturk Leave it "On" then if u have no issues, you'll know for future when something begin to happen

[@melih.ozturk]

@@MavVvius I started getting crashes very often in pubg, like I will turn it on for this setting

[@creepybeat]

it really worked here, games are running smooth now ! Thank you !

[@PEAC3FU1WARRI0R]

Hey @Panjno hope you're having a solid week, appreciate this new video... However I was wondering if it would be possible to do a triple monitor Nvidia Surround settings video to get 120hz+ on all 3 144+ monitors??

[@M3PH11]

At higher resolutions the driver limits the frame rate due to things like memory restrictions and core clock and the monitor default refresh rate. If you look up the maximum possible resolution for your card it will also tell you the maximum Hz it can refresh that at. Now, If the resolution can be refreshed higher than the default you screen can do it (so say your 144hz screen defaults to 60hz but the gpu can refresh the resolution at 75hz) you will only get 60 as an option. Now you can kind of bypass this by disabling v-sync and then making sure you montior is set to the refresh rate you want but again you will be limited by what the machine can physically do.

[@PEAC3FU1WARRI0R]

@M3PH I appreciate you, I knew this from my decades of PC work, but it was because I ay the time was a 32in MSI 165hz and 2 24s @144hz.... I figured it would drop the 32 to 144hz and give me 144hz across all 3 but it didn't because the monitor models were different, like a week after doing this comment I bought another 24in and now surround does the 144hz on all monitors. However, for streaming purposes since my TV is the only screen I have that does true 240hz, I decided to drop down to 120 as it's divisible by 60 which helps the encoder process the video way cleaner on stream... But I appreciate your comment, I'm sure it'll help someone out 💯✊🏽

[@brezimenkobrezprezimenko2131]

Why we cant see benchmarks for 1060, which would be more interesting..

[@ShinsoXDD]

Hi when i do the DLDSR setting the game looks amazing but the mouse feels weird like its get slowed :/ is there any fix or way for this ?

[@GamerLux69]

Great Video Mahn!

[@grantechsweng5268]

thanks for tuning my low-end gaming system for DCS.

[@irvintang2751]

Can you do a system optimization guide for elden ring? The game stutters a lot, crash during online play and frame drops when using night maiden’s mist on a small group of enemies.

[@markjacobs1086]

There's nothing you can do, DX12 & Vulkan titles ignore most of the driver settings (which is usually beneficial if correctly used by developers, if done improperly stuttering & such is the outcome).

[@juahnhachi4901]

Hi Panjo. thank you for posting another fps boost tutorial. I've been following your FPS boost tutorials and it really helps. I just want to ask which is better for me, G-sync off or on. I have i5 7th gen and my gpu is gtx 1060 6gb. I currently having 60-80 fps while playing warzone with NIS on. thanks again!

[@Panjno]

I would turn ON g-sync for you, your fps is on the lower side and the game should feel more smooth afterwards. What refresh rate is your monitor?

[@juahnhachi4901]

@@Panjno it's 144hz. thanks bro!

[@leptir1]

@@Panjno ????????????????????????????? bro what

[@fullclip_nz]

the whole point of gsync is when your average fps is lower than your refresh rate, it bridges the gap so to speak, i literally have the same card and same monitor hz, and freesync works for me better on than off

[@truthfilterforyoutube8218]

@@Panjno Hey Buddy.... great Vid... I've used your tips before. I am attempting to " Tune" my new build....11900K z590 hero MoBo and an EVGA FTW Ultra 3090.....when using the Nvidia inspector ( having followed the " Non Global" method) and tuning in Microsoft Flight simulator and saving the settings.... do I need to keep the inspector open when flying or do I need to just save the settings and close it and forget it ??? IE{ set it once and it will always work closed ??

[@robingaming441]

This video is very helpful :)

[@licketysplit2575]

Amazing vid, really hlped inprove my FPS and gaming experience. One thing i would like to reverse but unsure how or if its related, When in game playing i usually watch twitch / you tube on second monitor, that now stutters and freezes very often

[@richardmacdonald2915]

Hello panjno. Do these optimizations work on a gaming laptop? In the past I have noticed a few changes that I couldn't make due to not having the options that pc users have? Any help would be greatly appreciated.

[@richardmacdonald2915]

Does anybody know the answer to this? Massive FPS drop since the bee warzone update so looking to do some of these

[@rahimsvoice]

@@richardmacdonald2915 Same here. The only thing I'm worried about is temperatures being higher ...

[@ardabozkr9546]

Makes worse for my gaming laptop so I reverted to the original settings

[@all_night_long_]

You have no idea how much this helped. I used to get 300 fps in my favorite game and now im getting anywhere from 600 - 1500 this is actually crazy. thank you man, you made my whole week.

[@Yes-sw8gh]

Nobody needs those framerates, not even 300 fps, it will burn out your videocard so much faster than just running it slightly above your monitors refresh rate.

[@Rimmer666]

I had 500fipps in all games and now I have at least 1000fupps! Best ever bruh!!!

[@antious]

Awesome video, thank you!

[@grugbug4313]

Solid! Top KEK! Peace be with you

[@napstericious]

Thank you for such a detailed and helpful video. I have a question regarding something that has been bothering me for a while. Do you know why does Dota 2 CPU and GPU usage stay bellow 60%? I've tested it on several PCs and it's all the same, regardless of me optimizing those PCs or not. For example I have Ryzen 5 3600 and GTX1070 Strix OC, 16GB 3200MHz CL16 and my CPU never goes above 40% usage and GPU never goes above 60-65%. To make it worse, CPU usually hovers around 30-35% and GPU around 45-55%. I've been getting the same FPS with Ryzen 7 1700 and GTX1050Ti and with this PC. What's up with that? Also, both of my CPU and GPU are regularly cleaned, the entire system actually is being cleaned twice a week. I have 5 Arctic P12 fans in a good airflow case. I'm using Western Digital SN750 Black 3500mbps nvme, however my monitor is an AOC 60hz ips. FPS ranges from 100 to 190 but usually is around 120-140. I've tried discovering what might cause this and didn't have any luck. I really hope you'll see this comment and hopefully discover what the issue is. I'm planning on getting a 144hz monitor so fixing this would mean a lot. Thank you in advance and once again thank you for your videos as always. :) Cheers

[@ericwasgehtsiedasan1800]

Have you tried changing the dota.exe process to 'High'? Maybe worth a shot if you haven't tried it

[@napstericious]

@@ericwasgehtsiedasan1800 Actually yes I have and it didn't change a thing. This is why I find it quite bizarre.

[@thegmoneyd7388]

The game just probably isn't very optimized. Developers do this alot with games that aren't that demanding to run. If people are already getting really good fps they don't see the need to make the game run at 300fps for most people instead of 200.

[@jzuany]

same here

[@patrickprafke4894]

I have 1. Make sure your power settings in windows is set to performance. Learned the hard way. Very noticeable difference.

[@charleshorseman55]

Most people who complain about choppy performance/sound artifacts in youtube 4k generally are 1. have their windows power settings NOT set to performance 2. are on laptops, where their windows power settings default to battery saving.

[@newtgingrich1712]

I go to my power settings and click high performance restart the computer and it goes back to balanced . Any ideas on why ? Does it have something to do with administrator settings ?

[@EnvyAlphaGaming]

I actually did this and benefited running at actual 4K 3840x2160 on warzone I used to get average 121 fps, when I did this I now am at 160-170 hardly any fps drops, when I play at 2160x1440 I get 200 plus, when before I was stuck at 150-160 this definitely worked big time

[@Alex-uh6bw]

Bro im gonna sub. You're amazing!

[@jamesclips5472]

Hey Panjno, how come you have settings such as monitor technology and power management mode and other settings that dont appear on my pc. I have a 3070 and am on the latest drivers. I see other people having them just not me. Do you know why?

[@messinator1621]

same with me but I think its cuz hes on windows 11

[@yeah5162]

No, im on windows 10 and i have 1060 and they are shown to me idk....

[@jamesclips5472]

@Flowy @Messinator it's just I've seen people with extra options on windows 10 then what I have. It's weird cause like following optimisations from like fr33thy he has options that aren't shown to me as well and he's on Windows 10 u til recently

[@habibdeleonbanos8196]

I guess you need a G-Sync compatible monitor. Mine is FreeSync and I do not have the option.

[@maciejweber4256]

Whenever I change the "Power Management mode" setting for either exploler, or the DWM, it reversts to its original setting everytim I hit "apply"... any ideas? It must be said that my only other option besides "Nvidia recommended" in the drop down against this setting is "use global (prefer maximum performance)"...

[@rayadelaide3096]

Try decreasing resolution -apply.. then set everything at desired level then apply

[@porcelain4261]

@@rayadelaide3096 Thank you so much! It works!!!

[@rayadelaide3096]

@@porcelain4261 yea buddy

[@amarigamingallday]

@@rayadelaide3096 What do you mean decreasing resolution?

[@i-wish-i-was-afk]

Wizardry, thanks for sharing. The change to explorer was noticed instantly

[@MrZathura95]

Instead of ''Just trust me bro'' approach, you could explain what these options do because I can assure you some of these actions WILL wear out the components affected unnecesarly while pc is idle.

[@ytaccxd4586]

High quality video as usual, thanks. By the way, I saw that disabling cpu 0 can boost fps

[@TheJustifier17]

in some games

[@grimgar8573]

is this recommended for gaming laptops ?

[@Miilo]

running a 3070ti and with these settings i got 15-20 more fps in minecraft with shaders on. cannot be happier with the results.

[@dananjayachathuranga7113]

This is working perfectly. Im lowend pc user playing apex with 8 gb rqm and i3 3rd gen processr. This is increase +25 fps. This is only one video which i got some results.

[@domas6057]

thank you so much man, your videos are the only reason i'm still able to enjoy gaming nowadays and im not over exaggerating

[@pontfolid]

You can say exaggerating and get the same point across as saying over exaggerating. That’s what the word exaggerate is for

[@domas6057]

@@elyzium not really, without optimizing my pc i get around 80-100 fps and i can feel that my game isnt running smoothly, after applying all those settings i get 144 consistently, and since im using a 144hz monitor theres a huge difference

[@sepimomane5158]

went from 60 fps to 40-50 fps, thank you so much bro !

[@TheOperationHastings]

Thats whats gonna happen when ytube removed dislikes

[@phabran]

Same here.

[@LatoBl0win]

🔥 new to da scene vids been coming in clutch

[@Dancer-ms3me]

The G-Sync was the clincher in all this, where I disabled it. That pushed my FPS in game from 160 to 275. ...of course the other settings had a factor in it too.

[@tennesseesmokies5066]

Should these settings be stacked on top of the other settings from previous videos? Like image scaling. I just purchased an 3070 ti and I want to have all the settings adjusted accordingly. I have my settings set up now for a 1650. Upgraded to a 3070 ti

[@jimmyhicks5926]

good to c a local up in here i live in Gburg in the Smokies right next to the park

[@tennesseesmokies5066]

@@jimmyhicks5926 Im actually located in West TN North of Memphis. Tennessee Smokies was the name of my sons travel ball team

[@jimmyhicks5926]

Vision 3070ti is what GPU I have and it is a beast I love it

[@tennesseesmokies5066]

Sweet. I have the zotac gaming 3070ti holo amp edition

[@painsin1954]

Power management mode switches back to “Nvidia recommended” every time I change it

[@MrCrunch215]

Here’s what to do change the setting then just exit out the control panel…. It’s gonna say do u wish to apply the changes u made click yes! After that restart ur pc then open the control panel up and it should be changed

[@painsin1954]

@@MrCrunch215 thank you man

[@leonardbell3609]

Thank you for this informative and educational video!

[@cash3450]

Insane video results were better then I could have ever imagined

[@GholaTleilaxu]

Why would you want the _Power management mode_ set to *Prefer maximum performance* for _explorer.exe_ and _dwm.exe_ (Desktop Windows Manager)?

[@ronniecantiga5629]

I know right those two are not even games nor 2d programs 😂😂 no wonder why this guy got so much hate because most of he's tweak are relevent.

[@JollygreenFullSteam]

Just applied the recommendations from the video and my CPU temps went from 28 degrees Celsius IDLE to 55! I did not make any other changes except for wagt was mentioned in the video.

[@lnbabz]

Wow really??? What system are you running?

[@Panjno]

This really shouldnt be the case as nothing we cover in this video should adjust this, however you could change your power management mode back to what it was

[@JollygreenFullSteam]

@Panjno I don't know why it's doing that, I've had no other issues with any of your videos but this one I followed to a T and resulted in crazy high Idle temps. I reset the NVIDIA panel back to stock settings and the issue went away.

[@toostronk934]

@@JollygreenFullSteam prolly prefer maxium perfomance makes your cpu go full mhz at all times

[@poko60]

It's probably something to do with the prefer maximum performance settings. Do everything he says but instead of max performance, let your PC optimally decide power Also check if your intel card (if you have a inbuilt processor gpu) is not set on high performance only mode in the intel graphics panel

[@young_ese1365]

This video saved me I thought something was wrong with my pc

[@xXDarthBagginsXx]

Still rocking a 1080Ti, so always trying to squeeze all I can out of it - still clocks to 2100Mhz on the Core too 🤘(Only use MSI Afterburner for my GPU OC's). But I forgot about the NV Tool (Other than the basic Control Panel), thanks for these tips.

[@VinnyUnion]

My STRIX 1080 is btching at unstable 2012Mhz. 750 power supply gold i believe. I wonder. Whetever it is the power supply for the volts flunctuating while in that overclock.

[@konkelkent]

Same here, im actually impressed on how good of a card it still is, usually when a card is this many years old the performance just goes downhill, but this card still shines. makes it so much more worth the money.

[@GregoryShtevensh]

Thirsty card though. A 4060 would be better performance and cheaper to run now. But still, if you're not concerned about heat and power, than it will do the job. Either way its still a good midrange option even today

[@burakmovie]

I can't change any settings in the Nvidia Control Panel for the windows explorer.exe or the DWM.exe. All of the options are grey. I opened Nvidia Control Panel from "open as administrator" too. Any idea what the problem is?

[@chinacat4u2]

i have the same issue . i have a dual card setup in my laptop . I added explorer.exe to windows setting to use the better gpu . Even after that settings are still greyed out in nvidia.

[@ventoyyyy]

probably because of integrated gpu

[@neomonreasid]

Same as mine too. Try to do the settings like in the video but it greyed out

[@zechtt2735]

@@neomonreasid already found a fix? its the same as mine

[@neomonreasid]

@@zechtt2735 nope

[@Grandhouse]

In Power management mode i only have two options to choose: "recommended from NVIDIA" and "Use global settings" How do i get the other two options "optimal power" and "prefer maximum performance"?

[@jayrjayrjayrjayr8650]

Do you need to do this on top of your performance videos before? Your previous videos helped a lot on warzone. Thanks

[@RAMROD1847]

Amazing guide. Just had to make a tweek. I need vsync enabled because I get terrible screen tearing. I set it to fast and not rdr2 runs like a dream. Thanks.

[@resColts]

When comes to input lag the key thing is constant frametime you get this from fps cap. Disagree with disabling gsync somewhat. If your running 120Hz and can do fps cap of 116fps and its constant its going to be smoother/lower latency than averaging 120-200fps especially if 99% fps falls below Hz. Also if you can get 116fps constant to be lower than 90% gpu usage, its lower latency than 99% constant. If you can maintain above refresh rate fps at all times then I would disable gsync with some key things met like 99%fps is also above refresh rate, cap fps for constant frametime and try to achieve 90% usage or lower unless fps is 300+ (latency is low enough past 300) at all times or If game supports nvidia reflex then fps cap doesn't matter that much if at all. But absolute smoothest and lowest input lag will be constant frametime as the delay will always be the same.

[@melih.ozturk]

My friend can you help me for PUBG. The fps in this game is very choppy and inconsistent. You get 250-300. You can get 80-100 at the time of battle. In-game FPS capping doesn't work very well. what do you recommend. ( My PC speecs RTX 2070 Armor OC, i5 9600k 4.9 OC, Ram 16 GB 3333 MHz OC.) @resColts

[@jakeman025]

@@melih.ozturk I would definitely use g sync then. I play cod and the fluxes are the same in that game to. I got a 360hz Alienware with the g sync processor in it and playing on that with g sync felt way better than my 240hz on fixed refresh.

[@melih.ozturk]

@@jakeman025 Is your monitor not IPS? How do you think the response time compared to a TN panel?

[@jakeman025]

@@melih.ozturk I had the top TN panel before going to 360 IPS. The input lag and the response time both smash the top of the line TN now. Even with the g sync it’s still faster than the TN but way smoother. The only thing is you can’t adjust the colors as much but the IPS colors are already superior.

[@melih.ozturk]

@@jakeman025 i can't decide between benq xl2546k and alienware

[@Grievous-]

Overall a great video, but I don't see the point of showing us benchmarks when using a completely different GPU compared to the one you were making all the changes for (the 1060)....unless the changes you made had no significant bearing on the changed settings for the 1060 ? 🤔 For that reason I cannot recommend these changes to anyone.

[@michaellorenson2997]

Excellent, thanks!

[@alerivsm]

works perfectly, thank you