These Hyper Tough 12v Cordless Ratchets Caught Me By A BIG SURPRISE!

#tools #mechanic #walmart
A Review of The Hyper Tough Cordless Ratchets From WALMART!
A Good Bang For the Buck !
IF You Enjoyed this video, then LIKE, comment, & Subscribe to keep up with my daily Content and Vlogs! 💪🏾🔧
Music Credits: @ogpandabeats7135 ​

[@EzTechJoe]

What's Up Guys!! CHECK OUT THE UPDATED REVIEW HERE!👇🏾 kzbin.info/www/bejne/gYepYax4ZdeDqM0

[@johnnyray34]

This tool does the job that it is meant for nothing extra. That's why I have the shorter one in my toolbox and I love it .Keeps me from having carpal tunnel problems!

[@johnnywishbone932]

These videos are cool and funny in a way. People tend to think the big brands are making tools for you when in reality they are making profits for the shareholders. Most of the tools have the same design and materials. The big brands do a bit more QC but they still have warranty issues. Most mechanics will make a nice bank off some cheap tools and if they break just repeat and now you have extra batteries for the next tool. We think price over quality and companies get our money every time. I love seeing videos like this! They save me money! I am not fancy! I am cheap and if I can DIY for less thanks for the tip on some cool tools Bro!

[@EzTechJoe]

Appreciate it man! I definitely agree!. I did an update on these ratchets a few weeks back to let you guys know how they held up through time! 👇🏾 kzbin.info/www/bejne/gYepYax4ZdeDqM0

[@Lyle-1999]

For $89 bucks, that is a steal. Nice video. I got the brushless impact driver as well and really like them all so far. The extended reach is my favorite.

[@EzTechJoe]

Thanks I appreciate that! Yeah I think I'm going to invest in Hyper tough impact drivers for some around the house use. No complaints so far!

[@Brysonandmason320]

@@EzTechJoe i use the brushless impact and the drill at work i use the impact for lower covers for oil changes and air boxes and i use the drill for cleaning stuff with a wire wheel

[@EzTechJoe]

@@Brysonandmason320 that's dope!

[@johnmarks1258]

I have one and I love it. It’s crazy. It’s so cheap because it does not look or feel cheap at all it works just like the expensive ones

[@EzTechJoe]

Yes sirrrr! Totally agree

[@alcerz984]

People fail to realize all these ratchets an batteries are made in china even milwaukee.

[@csl9495]

I was taking out a master cylinder in an older car and I was having difficulty because it was too tight in there. After struggling a bit I just went to the store to buy this extended rachet and bam! Easy

[@georgebonney90]

I only real hyper tough tools i have are pry bars and they're made in the USA

[@mrcokez1]

Hyper tough been stepping up lately along with hart

[@EzTechJoe]

For sure. Here's an updated review on them that just dropped today 👇🏾 kzbin.info/www/bejne/gYepYax4ZdeDqM0

[@eastcoastken]

I bought the cheapest Milwaukee version on sale, just the regular M12 and its done great. Dont need the high end ones working in an autobody setting.

[@kendalgee5808]

Is it variable speed trigger control? People complain the $100 AC delco extended reach doesn't have variable control, that is their only complaint. If it is variable control, then its better than the AC Delco. NM. Just saw it on the box when u showed it, it is variable control. Cool beans ! Thanks for the video review .

[@EzTechJoe]

No doubt man!! Glad it could help!

[@podlfksduesfe2539]

Great video ! Your videos are very inspiring . I am deciding I don’t want to be a Starbucks soy boy barista anymore

[@jamesgamerguy3]

how did you end up liking the long neck version so far? ive been wanting to get a long reach for a while

[@EzTechJoe]

I like them both. The long neck for sure to get up in hard to reach areas. I'll be doing an update within the next few weeks!

[@miguelsalazar3239]

Got both... for the price, you can't complaint. Hope they last for a few years.

[@venividivici6418]

Thanks for the review. Which of the 2 do you find yourself using more? The short neck or the long neck?

[@EzTechJoe]

They are quite even depending on what job I'm doing. But more over the extended reach

[@EzTechJoe]

I have an updated review going more into it later on this week

[@venividivici6418]

@@EzTechJoe nice, thanks for letting me know.

[@brandonespinoza6839]

Bought the kit got it for 84 online does your long reach make a popping noise on the inside when you tilt it up and down

[@EzTechJoe]

No mines have worked fine. I use mine every single day. And have dropped it and everything. I also clean it and take care of it also. Is it to late for your warranty? Maybe you can replace it.

[@grier6191]

Like to see a update on these ratchets after some good use.

[@EzTechJoe]

No doubt! It's coming soon!

[@bjgabriel101]

@@EzTechJoestill working?

[@EzTechJoe]

@@bjgabriel101 yupp they still work. Although I have upgraded since then, these have done great. kzbin.info/www/bejne/gYepYax4ZdeDqM0si=CIrPYW2uR1RZuimY

[@kencooley5589]

Can you give a follow up review when these have some use on them? Every review I see of these ratchets, they are perfectly clean and not used at all. Im not proud my tools are dirty, but I would like to see what you think after using them on a few jobs. How is the battery life? Do you notice the power or speed get bad quickly (meaning the battery loses umph when not fresh) How is the charge time?

[@EzTechJoe]

That's actually coming up pretty soon!

[@trailman20]

​@@EzTechJoehave ya put that video out yet?

[@EzTechJoe]

@@trailman20 sure did. Here it is here! kzbin.info/www/bejne/gYepYax4ZdeDqM0si=f2Bv8pMgJWa86QP0

[@BADD400]

Good video. I just subscribed to your channel.

[@EzTechJoe]

Thanks! I enjoy making these videos for yall! I appreciate it💯

[@FAMOUSSLICKRICK]

Good review Sir. I have been wanting to buy one this Hyper Tough Cordless Ratchet and a an extra 2.0ah battery. I have seen a lot of positive reviews. I was wondering sir if you could please help me and let me know if the head of the ratchet is smaller than an average 3/8 drive ratchet head? 🇺🇸

[@EzTechJoe]

Appreciate that man and no doubt. I can mostly definitely do that. Stay tuned I'll be doing that for you soon

[@FAMOUSSLICKRICK]

Oh thank you sir for your reply and helping me. I would love to see it. I am holding off ordering till your review. I pray that this cordless ratchet head is smaller and thinner than the normal 3/8 ratchet heads are. Make it better for tight quarters, without using a flimsy 1/4 cordless ratchets. Thank you again sir for helping me. You are awesome!!! 🇺🇸

[@EzTechJoe]

@FAMOUS SLICK RICK no doubt man. I got you!

[@williamcarnero9595]

Is it single or variable speed trigger?

[@EzTechJoe]

It's a variable speed trigger!

[@WithGrant]

Hey Joe, I'd like to sponsor the channel...where could I reach out to you about that? Love the content man!

[@EzTechJoe]

Hey thanks! And I appreciate that. You can reach me at my email. It's available on my "About" page

[@philliphall5198]

What I need for the small engine I do every day

[@EzTechJoe]

I've used them every day since i got them to. Very useful. I use them both

[@paultrimble9390]

What's going on Mr EZ Tech Joe. Hyper tough stuff is so so . My experience with them. Some things great for the price some not so great and some just junk at any price. But as we all know you get that with all the brands. Yes guys n gals snap on is no different they have some junk to. But it's always over priced for sure. Like u say 89.bucks.for two extended reach to not bad if it just a decent tools. 180$ get u a 4 pack. 2 of each that's price of one bare tool from big names and not enough for few of biggest brands bare tool so yeah. But as I say got older hyper tough 20 volt saw zaw and it's not enough battery to do to many cuts. With bigger Battery amp hour wise might do bettery. Good video I'll be checking ur channel out I like it. Well stay safe from ur ole hillbilly buddy.

[@somethingtrulyhorrifying]

I got the 20v angle grinder and that thing wouldn't even cut a empty soda can without stopping the blade. The ratchet seems promising though, think I'll pick one up this week and do the timing belt on my truck. Hoping it will at least hold up to some occasional diy use.

[@donaldstepp4850]

They should come with 2, 10mm lol

[@johns9888]

Like to see compared to Hercules!!!

[@EzTechJoe]

Me as well man. That's a great idea

[@coIey]

How are these holding up joe ?

[@EzTechJoe]

I have an Updated review dropping about them soon. It's some pros and cons. But not a disappointment

[@coIey]

@@EzTechJoe i need to invest into a 12v platform. I run makita impacts but the makita cordless ratchet looks uncomfortable. I wanna get into the milwaukee 12v stuff, but damn near $300 for tool only!

[@HawkeyeMobileAutoRepair]

I have been loving the AC delco 12v ratchets from amazon, plenty of power and speed for about $100 a piece with a battery or 2 included depending on the sale. However, since seeing these I have become increasingly interested in picking these up if the AC Delco's give up. Eh, or maybe the HF offerings. Hard to beat going in to a physical store for parts/warranty. Torque Test channel has some information on how all these different things compare out of the box. If only there was a fair way to test the wear over time these poor abused things experience to know the strongest- longest lasting for the $. Cause who knows, maybe that $300 bare tool will literally last a lifetime, and the $100 will break after 5 years, or the opposite, or who knows. lol