These Just Might Be The Best Fitting Fuel Rails On The Market!

[@wayneselman9481]

Damn man those rails are nice. Damn sucks dropping anything down in the engine never ending tail

[@joey4872]

Quick tip Foxbody fans. The Edelbrock fuel rails are also 100% direct bolt-on. No modification is needed. Just follow their directions.🙂

[@WayneG504]

Will they work with trick flow intake?

[@projectsnprogressmike8159]

😂who is cheaper

[@Blown93]

Are they e85 safe?

[@mrh8409]

What is the part number

[@joey4872]

Edelbrock fuel rail part # 3628. 3/8 in NPT

[@tymekiller88]

Your having a night that I just had. You kept your cool tho much respect, seeing someone else having gremlins and not show emotion... how you do it.

[@SlayerStang69]

Oh man, dropped the nut!! I did the same thing only it was a washer down the intake hole for #7. The intake valve was open so it landed on top of the piston! I must say you took it way better then I did man!!

[@BREW2LFOXBODY]

Oh that sucks too 👀😱

[@FORDMAT77]

Fuel rails look good also super clean installed, gives just that little bit more room, Shout out to Anderson Motorsports Can't wait till the next to see what got changed..

[@Glens1965]

My set of these arrived 3 weeks ago. Looking forward to getting them on.

[@ogsuperflygarage]

Awesome realistic video Brother! I appreciate the tips for this installation. It is amazing how crap happens when you are almost done with an install...Thank you for sharing those moments!!

[@Go4BrokeOffroad]

Used these on my 351 truck lower. Worked flawlessly.

[@saleen88-049]

FYI, the incon (remember them?) rails have a 45 degree slant at the driver rail end to avoid all that, but that doesn’t matter with my 351w. I show this in my ‘Fuel System’ video.

[@hanlonmotorsports]

I just want to know how many duck quacks would have been used to filter out the bad words that were said when you dropped the nut in the timing hole, then topped it off with the magnet 😁 lol. Anderson Ford Motorsports FTW!! Can't wait to get a set of these rails for the new car thats coming.

[@paulhudgins5120]

Great tip, sounds like a good upgrade. Man you must be taken a page out of my book, drop a bolt, nut, socket, or something you need, then can,t find where you dropped it, break the magnet trying to find it. That's me every time I work on something.

[@BREW2LFOXBODY]

I know right.. lol it was a bad day

[@nitroustommy]

I have Aeromotive fuel rails and I had to trim the stock distributor a little bit where the lockdown tabs are for the distributor cap so I could turn the distributor more.

[@mike4fo]

Same for me with the aeromotive

[@stevenlamb3971]

Lol I was cleaning my intake last weekend holding the throttle plate open and the dumb red straw popped off the can and right into the plenum. Had to fish that out with a stick and a ball of duck tape.

[@mike4fo]

That’s nice I got aeromotive rails on the fox and they work great but are super tight against the distributor

[@jeffgriffith7003]

On my 2.3 turbo engine, while doing a cam swap, I accidentally dropped one of the camshaft retaining screws down the oil drain back hole in the head. Luckily, I knew it wound up in the oil pan but I had a fresh oil change and decided to stick a bunch of magnets on the pan until the next oil change where are the screw immediately popped right out of the drain undamaged. Lol

[@tarandeiniol3092]

Don't worry bubba I did a new rebuild and priming pump and socket dropped and I pulled instant transmission back out to drop hand to get that damn socket then put it back up and drop it in

[@funkystangs2843]

Those are nice. But going Holley Hi Ram on the 351.🤘😎🤘

[@williamlane6374]

Oops, lol. I e done the same thing with dropping the nut in that Sam hole. Drained my oil in the front, used a camera scope found it and plucked it out, was lucky. I used aeromotive fuel rails and they was very tight and had to space the front out

[@NorthRacing]

That cliff hanger crap ain't funny man😂😂 you did us dirty! Appreciate the content brother just got my 11r top end kit in the mail. Waiting on my systemax intake now

[@curtismccombs2212]

I love that red engine bay 👌

[@vtecbanger3180]

U have a excellent attitude.

[@ThaSilentOne420]

Thanks for the awesome shirt Brew2l and AMY

[@BREW2LFOXBODY]

You’re welcome I’m glad you finally got it ✊

[@six50motors]

I had same issues I had to grind lower distributor cap

[@brokentoolgarage]

Good job! Yeah, I pulled a novice mistake this last weekend too 🙃

[@BREW2LFOXBODY]

It sucks when it happens…. 😢

[@brokentoolgarage]

@@BREW2LFOXBODY Absolutely.

[@89gt5.0]

Needs a B31 now.👍

[@79beans347]

I see a cam swap coming for the retro so that it will chop harder. Tell me Im wrong 🤣

[@ValentinoMustangs]

My mechanic tried to install stock fuel rails on my speedpro intake and it would not fit. I ended up ordering the speedpro fuel rails so hopefully that solves the problem..🙏

[@AlleyAuto]

I have problems with the msd distributor, trick flow rails and Edelbrock intake. Rubs the distributor the same way.

[@joefrick1335]

Does any company make fuel rails that the injector holes are straight and have the factory regulator location? I have not been able to find any.

[@kstiubhard7058]

Fuel lines rubbing are definitely a concern.

[@awesomearizona-dino]

So are the aftermarket distributors smaller diameter?? (stock replacement type) if so, which brands?? Thanks

[@Fishbowl5.0]

That damn rabbit got you too! Careful in that hole...it can get deep

[@BREW2LFOXBODY]

I know right… 😜

[@elementl1166]

Sounds like a new cam is going in lol

[@ernestsmith4725]

I've been eyeballing those, but I'm afraid I'll need a bigger feed than -6an. Sorry about your luck! Sounds about like mine. Good reason for a camshaft upgrade though. 😉

[@AndersonMotorsports]

The rails have -8an openings, he is using -6an adapters

[@TheQwiksn95]

Bbrc fuel rails work great if u need bigger

[@nothanks81]

@@TheQwiksn95 That or 5 mins with a Sheet metal brake to bend the brackets on almost any generic rails...

[@justinbunch3879]

What kind of spark plug wires are those?

[@dustinhastings1824]

That is a really nice set of fuel rails hate you lost your nut brother haha

[@crazyhorseracing6130]

Question?? If you swap to a carb setup do you have to change your distributor?? Thanks for the videos!!

[@79beans347]

Nope 👍

[@jamesgeorge4874]

@@79beans347 what controls the timing advance on a pcm controlled distributor, with no pcm ?

[@pimpovic2]

Bro, I was so worried about your TPS sensor and what happened last time you messed with your throttle body, but this is way worse. I don't think pulling your timing cover will get you access to anything but the chain. You'll be lucky to find it at that little space right front of the oil pan. If you want access to that cam gear I'm afraid you're pulling that engine out. Man, fingers crossed for you 🤞

[@BREW2LFOXBODY]

I got it actually.. I was a bit worried though lol

[@pimpovic2]

@@BREW2LFOXBODY both parts? That's great. I would have had a prayer circle going lol

[@BREW2LFOXBODY]

@@pimpovic2 I was ready to pull my hair out. But yes we got both out

[@jasonhastings5538]

Should have _ _ swapped it!!!🤣🤣🤣 Man ive lost a may nuts and washers and end up just pulling the pan off!!! What a pain in the 🐴🐴🐴

[@BREW2LFOXBODY]

I got lucky this time

[@89notch]

#rabbit hole with that cover off lol

[@phide01]

Where are you located?

[@bama_5.051]

Yeah I like the look of them rails Ill have to check them out. Damn brew2l was Andrew distracting you from your work? Lol

[@shawngoff8290]

Is there anyone makes adapter for stock foxbody fuel lines to AN fittings?

[@AndersonMotorsports]

We use Fore Innovations adapters from the factory hardlines to AN fittings at the springlock connectors

[@shawngoff8290]

@@AndersonMotorsports that’s what I need I’ll take a gander at y’all’s website

[@jcnpresser]

You need you a bore scope with a , never mind lol. 😂 that sucks dude!

[@MrC2j2]

What brand rails, either can’t hear you clearly stating the brand nor can’t find in comments

[@Kevv9x]

On instagram