How not to disassemble Nikon d5100 camera

I crashed Nikon mirror photo camera and decided to repair it on my own using teardown manual found on iFixit. But it has huge mistake that make me angry: I disassembled matrix unit and dust came inside. I'd cleaned it using special matrix cleaning kit and isopropanol. It was the hardest repairing I ever done.
Buy tools: ali.pub/4spc54
Navajo Night by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/

[@devikapresents8744]

Best backing track of an instructional video I have ever heard!

[@acpck]

Thanks for uploading the video! It was of such great help as I needed to replace the broken SD Card door. Without your video I would have certainly break a fitting, as some of the screws are really well hidden! Thanks once again! 👍

[@schnizzyfizz7832]

SD card latch broken here. Snapped in two. Got a replacement one. This helped clear up how to get access and replace it. Thanks!

[@pccrit2171]

Good video. Now i know what to open to clean some fungus I got behind the first sensor lens.

[@muhammadbasir83]

I have 1 spot dust in between filter and sensor . It’s really annoying when I took small aperture photos.

[@arpadpetres1164]

Thanks for uploading. You often cover it with your hands the disassembly, maybee you sould change the camera angle.

[@vkjnrokis]

It helped me how to change keypad, thanks

[@homemadediy3515]

You can shoot the detailed video to remove the nikon d5100 shutter, I need it

[@Fubo777]

My d5100 has some kind of red-ish stain in the viewfinder (likely caused by moisture), my guess is it's on the pentamirror. Do I have to open the whole camera to clean it? I've tried checking everything I can access without major disassembly (mirror, the filter top of the mirror, and the surface behind it).

[@poojitha1798]

Well done

[@sspicture6840]

Tnks more ,and ,how to material and where canteri or citi pls

[@WingMan1]

Do you know how to change the viewfinder lens? Do I have to take it apart?

[@brightsidehindi2713]

nice video

[@vasimphotographers8015]

I want to learn this work, where and how to do it please tell me

[@engin834]

Hi there, Thanks for the video. I was wondering what temperature is your soldering iron is set to, my one goes up to 400C although it won't melt the solder?

[@KonstantinSachkov]

It depends on soldering iron power and quality (and price). 250-300°C is enough for most cases.

[@dn7321]

Hello. I had a Nikon D5100. When I try to take a picture, the auto focus lens mechanism turns left and right slowly (not normal) to focus an object. I just charge the camera battery pack fully. Could anyone tell me what wrong with that auto focus mechanism? Should I open this camera and apply some (a little) of grease into the mechanism auto focus? Thank you everyone.

[@KonstantinSachkov]

Check and clean lens-camera contacts firstly. Then check camera with another lens.

[@thegreatujo]

quite an adventure :))

[@SatyaNagenderGuthula]

HI My D5100, had crash, it has 3 feet fall on wooden floor, Since then Live view screen is dark and the pics are also dark, Lens is fine, View from view finder is good, Display is good, I think the CCD sensor is gone bad or some thing is loose inside with the fall. any suggestions ( I am ok with disassembling mobile phones so I can handle disassembly)

[@KonstantinSachkov]

Switch on live view, take out the lens and see if the CCD is covered by a damaged shutter.

[@SatyaNagenderGuthula]

@@KonstantinSachkov As soon as I turn to remove lens, LV mode is turning off, same happens when I turn off the camera.

[@KonstantinSachkov]

@@SatyaNagenderGuthula try using matrix cleaning in menu.

[@SatyaNagenderGuthula]

@@KonstantinSachkov this the video of my camera kzbin.info/www/bejne/b3Kle2Z3btd8fsU I have tried Clean sensor from the menu.

[@50shadesofblack93]

Brother how much for repair dslr motor?

[@KonstantinSachkov]

I don't know

[@alexandrossotiropoulos5621]

Open heart surgery is less difficult

[@user-fp2po3wl6w]

Страшно смотреть на это количество винтов и расположения массы деталей. Спасибо за видео, причём подробное и в хорошем качестве, да ещё и с предостережением!

[@KonstantinSachkov]

На деле не так всё страшно 😉

[@user-fp2po3wl6w]

@@KonstantinSachkov да, уже починил) Действительно не страшно. Единственное, не стал заморачиваться с винтиками и вкручивал их не в "родные" места. И после сборки осталось 5 лишних винтиков) Но главное - камера работает.

[@KonstantinSachkov]

@@user-fp2po3wl6w 5 - это сильно. Ну там явно болтики с запасом накрутили 😁

[@sanjeevprajapati4180]

Hello ji

[@azimby.]

на что снимал данный ролик?

[@KonstantinSachkov]

На телефон

[@sonofcong]

These need to be edited. Long video for little use. And you never show how you actually fix anything.

[@VinodPatel-hp6ms]

Mobil number sir ji