What Is the Himalayan Noise? • Let’s Pull it Down..! | TheSmoaks Vlog_2227

  Рет қаралды 8,133

TheSmoaksVlogs

TheSmoaksVlogs

Күн бұрын

Пікірлер: 32
@bennymanfrost
@bennymanfrost Жыл бұрын
You absolutely nailed it! I took the lower pivot out and the noise was still there. Watched your video and you were right on! You saved me a ton of work because all I did was loosen the swing arm axle nut and it’s exactly what you said. She absolutely just went free and the noise was gone and the suspension is working normally again! Thank you very much!
@chrismills4213
@chrismills4213 3 жыл бұрын
Oh ya another day in the Smoak shop….just love these videos, you learn so much. Thanks man 👍
@TheSmoaksVlogs
@TheSmoaksVlogs 3 жыл бұрын
Thanks so much Chris for always being here, it's very much appreciated sir!!
@sonderbens
@sonderbens 2 жыл бұрын
I had the same problem, put it all back together and tension it up until it starts to bind and then back it off till its free. I think the factory recommends something like 72Nm which is crazy tight, I think from memory i ended up with about 40Nm. Problem solved and the nut has never come loose.
@chrisc9376
@chrisc9376 Жыл бұрын
Mine was the swing arm bolt, too tight, took it all apart re greased and put back together not so tight 😂
@aviewfromthesaddle4160
@aviewfromthesaddle4160 Жыл бұрын
I would put money on it (quite a lot of money!) that the central spacer in the swingarm pivot is about 1mm too short. Chinese whispers perhaps, but I have heard through the grapevine it's a known issue in RE that was quietly fixed during production. I took mine out (2022 BS6 model) and measured it all up, and sure enough, the combined spacer and bearing races length was shorter than the swingarm tube length and I had galling on the dust covers where they were distorting. Yes, you can get away with slackening the swingarm pivot but, but that's not the answer. A washer to shim out the central spacer, to make the combined spacer length longer than the swingarm pivot tube is the real fix. Now mine is torqued up and the swingarm pivots freely with no noise.
@TJRohyans
@TJRohyans 3 жыл бұрын
“She’s bound up.” Probably not getting enough fiber! Lol! Y’all have a great day. Peace and love.
@fullmoon2614
@fullmoon2614 3 жыл бұрын
CI, cycle investigator. You are good man. We should get ready cause Winter is here. You guys endure. Spring is not that far off, although it will seem like it. Stay safe, warm, and dry. And again, YOU DA MAN!!!!
@TheSmoaksVlogs
@TheSmoaksVlogs 3 жыл бұрын
Thank you very much Cedric!!
@ACE-or8bo
@ACE-or8bo 3 жыл бұрын
i agree it was over on torque specs
@banditnev
@banditnev 3 жыл бұрын
The Royal Enfield mystery tour!
@la_old_salt2241
@la_old_salt2241 3 жыл бұрын
Bummer about poor Himi, but you'll get her sorted out Shawn. Look forward to mail call. God bless, Rob
@TheSmoaksVlogs
@TheSmoaksVlogs 3 жыл бұрын
Thanks Rob!!
@johnnybuckner6955
@johnnybuckner6955 3 жыл бұрын
Great vlog. Very informative. Thank you
@aBluegrassPicker
@aBluegrassPicker 3 жыл бұрын
Great video. I love this stuff.
@TheSmoaksVlogs
@TheSmoaksVlogs 3 жыл бұрын
Thanks for watching Tom!!
@gustwowheeling7337
@gustwowheeling7337 3 жыл бұрын
Creaking like a cheap motel room bed. Good stuff Smoak's!
@TheSmoaksVlogs
@TheSmoaksVlogs 3 жыл бұрын
Pretty much! Lol Thanks Gus!!
@stephenward8550
@stephenward8550 3 жыл бұрын
My guess is over tensioned pivot bolt...
@DEANO914
@DEANO914 3 жыл бұрын
Hey Shawn and Kelly! It’s getting cold outside!! Get your butts back in the house, I miss seeing my patch in the background!😁 On another note, Shawn, did you see Casey has a couple new videos out? I’ve missed that dude!! He is an amazing person! Hope you and Kelly have a Wonderful Christmas!!!
@williammcmanus2841
@williammcmanus2841 2 жыл бұрын
Mine is doing the same thing. Could I loosen the nut and tighten to proper work spec or will I have to take it apart completely?
@wallmaker84
@wallmaker84 2 жыл бұрын
Mine too. Is It sufficient to re Torque to proper specs?
@francois-thomastremblay2592
@francois-thomastremblay2592 2 жыл бұрын
Hey man, same problem, did you try to just retorque the bolt to proper spec?
@nnervous
@nnervous 3 жыл бұрын
Warranty work?
@TheSmoaksVlogs
@TheSmoaksVlogs 3 жыл бұрын
Yeah, if I wanted to, but I'm not taking the time to deal with all that... Thanks!!
@ohdirtracer
@ohdirtracer 3 жыл бұрын
I know your missing that shop lift 😁
@TheSmoaksVlogs
@TheSmoaksVlogs 3 жыл бұрын
I'll get one at some point, would be nice!! Thanks!!
@jeffhennings6015
@jeffhennings6015 3 жыл бұрын
No warranty on that puppy 😬🤔
@TheSmoaksVlogs
@TheSmoaksVlogs 3 жыл бұрын
Oh yeah..! But I don't mess with that unless it's something serious. Not having anyone touch one of my bikes when I can do it myself, even if I have to purchase parts. Thanks Jeff!!
@PeterSmith-or3pq
@PeterSmith-or3pq 3 жыл бұрын
57 nm is max . 40 nm min ., looked way over torqued
@GopherChoker.
@GopherChoker. 3 жыл бұрын
👍👍
@russcoaus2043
@russcoaus2043 3 жыл бұрын
😎💯🍻✌️
Out & Ready for Teardown!! • R1250GS Motor Job! | TheSmoaks Vlog_3326
27:48
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
SUSPENSION LINKAGE QUICK MAINTENANCE - ROYAL ENFIELD HIMALAYAN
15:10
ON TWO WHEELS BEN
Рет қаралды 8 М.
I Scraped the Entire Steam Catalog, Here’s the Data
11:29
Newbie Indie Game Dev
Рет қаралды 579 М.
Fixing Europe's Borders (And Making Everyone Upset)
15:21
General Knowledge
Рет қаралды 317 М.
Is Buying a PETABYTE on Ebay Stupid?
18:13
Linus Tech Tips
Рет қаралды 1,7 МЛН
Python laid waste to my C++!
17:18
Sheafification of G
Рет қаралды 153 М.
Definitive Guide to Buying a Mac mini (and NOT wasting money)
17:56
Pete Matheson
Рет қаралды 176 М.
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН