Thetford toilet flush not working

[@margaretmayo5804]

Many thanks 🙏. You solved the problem 🎉 We are just about to go away and had thought that we would be going without a working toilet 😢

[@KipsterED]

That’s exactly what was wrong with mine! Thank you a thousand times over. This is the only video on KZbin I could find actually showing somebody fixing this.

[@coltoncook2498]

Literally same thing! Jammed pump! You sir are an absolute saint!

[@josechapman7611]

Thankyou very much this enabled me o fix my toilet .it was as you said the pump was jammed .

[@clivehaylett8034]

Extremely clear guidance and very useful it solved the problem which was sticking circular valve once freed works perfectly thank you so much

[@kezandmuzadventures7359]

Thanks Gerard, looks like I'll be tackling that this weekend :)

[@user-pp3ps2ms6w]

Super grateful for this video, thank you!

[@ericj8844]

Great video thanks. I had some corrosion on the fuse and motor was jammed. Your tips fixed the problem! When trying to get the pump out I thought I had broken the connection into the bowl... the outlet fixed to the end if the pipe snaps into place with an orange. Pulling the nozzle out through the reservoir made getting pump putters easy. Thanks again.

[@ericj8844]

Orange = o ring Putters = out Sorry about those... combination of fat fingers and auto correct!!

[@jamesappleyard8928]

thanks for t omce again he video, fixed our problem although i pulled the outlet out took about 3 minutes to re-install, once again thank you saved me a repair bill.

[@stephendouglas1911]

Thanks mate. I'd also just like to add that you make sure the hose is seated back properly up the top otherwise your flush will spray upwards right out of the bowl like it did to me 😂

[@TeresaHewson-ls1vq]

Thank you so much for your video. It fixed our problem. 😊

[@nanwithaplan]

thanks, clear and concise explanation...big help. Cheers

[@bassman866]

Great advice, thanks.

[@pipedoctorplumbing]

Thank you so much!!

[@CaseyReed-g6w]

Absolute legend!🙏

[@heatherforrester777]

Thanks for your explanation. My fuse simply has an E stamped on it. What rating does the flush require?

[@heatherforrester777]

OMG - I'm so stupid - E=3!!

[@janinebutler3474]

Thanks for the video. It helped me understand how to get to the pump and how to eliminate issues. My pump will not turn off once the main circuit switch is turned on. Any advise?

[@GerardHand]

Sometimes this is caused by the circuit board getting wet. Recommend only travelling with flush tank half to 3 quarters full.

[@lynettebronca5328]

Hi, when i look into my tank there is like a black flangey looking thing and i cant get the pump past it. Did yours have this?

[@GerardHand]

No my tank did not. Surely that must be removable because I would say that that would be the only way to access the pump.

[@ericj8844]

Nozzle into bowl snaps out... sounds like ypu crack the pipe but it then pulls out makes it really easy. Thought I'd broken the lot but no!!!