How to make and use a Leather Quick draw Knife Case

This quick draw Knife case goes to the winner of my 700 subscriber contest the winner was "gsrgopedrider247" and the hatchet case's went to blade1234jj and smallgameslayer Thanks for watching and please subscribe .

[@dford459]

Where would I find the pattern for this sheath, I'd like to try and make one. Great videos by the way!

[@jenkins1979]

Love your design thank you for video

[@rockwool2117]

lol the mule deer hanging was great.subscribed

[@xxIVANxx13]

that looks really cool i'm gonna give it a try!!

[@douglasreid9]

Love it

[@mperkins754]

thumbs up from me.cool as heck

[@thomasrichmond7989]

Great video too by the way!!

[@ferellocoazteca]

That was a lot of good, thank you.

[@weaglem2002]

That was great Video, thank you very much, im drawing up a design to try and make this myself. :)

[@xxIVANxx13]

really like this vid, subbed

[@lwilliamsrdr]

I gave you this idea!!! Thanks!

[@siegeandspike]

Nice video, thanks.

[@LuCaSiZaWzOm]

Nice dear

[@jerielyork1985]

Thank you you're clear explainable to what you've done and what to do except for one thing where do you get the pattern from thank you

[@thetimetohunt]

Yes it is . It is a awesome Knife . Thanks for watching .

[@ccasey101372]

Love to get one

[@1030brad]

man, thats really neat. Be a great hobby to pass some time while you are not hunting, fishing, or working.

[@thetimetohunt]

@lwilliamsrdr Man i had no clue what one was tell you told me . so I sat down and came up with my own . I made about 5 of them before I could get it to work . you can get those nylon spacers at just about any hardware store . That was the hardest thing to come up with . I was not sure what type of material to use for the blade to ride on . But they make cutting boards out of it . so i think it will work just fine.

[@thetimetohunt]

Na man i got that deer with a 32 Winchester Special . Them swivel Knifes are about 10 to 30 dollars . It just makes it easy to cut and levees a nice edge . Thanks for watching and good luck. Tyler

[@thetimetohunt]

Yes I do . I'm asking $ 40.00 + shipping . They take me 3 - 4 days to make . Thanks for watching and take care

[@sebasopg15]

where do you guys order the nylon washers and chicago screws from?

[@carlosramayo9221]

Buenisimo m gusta es ojala pudiara hacerla como aprendis

[@weaglem2002]

the swivel knife is not mat to cut threw leather, its made to cut designs into the leather, if you are looking to actually cut the leather use a utility knife or some heavy shears, if you get the leather wet (case it) makes it soft and easier to cut/work with

[@SW-Video]

Where do you get the nylon washer used so it doesn't dull the knife? Do you make them yourself or can they be ordered from somewhere.

[@Kiowagoodfella]

Where do you get the nylon washers ?

[@leebarker4207]

Many people have asked for a template how do you determine the shape and holes I have a Case xx that is just about 3/4 shorter than a buck 110 I want yo make one blade is 3 1/5 and overall is 8 1/4 thickness 7/16 help please thanks

[@GSRGOPEDRIDER247]

Where can I get the materials? Im looking for that same hard leather you used and I'm having troubles finding it

[@jackrabbitslim66]

Do you make the sheaths for people who ask for them, or do you just show how thet are done If you sell them how much?

[@thomasrichmond7989]

Where can I get a copy of the pattern you use for the Leather Quick draw knife case? Working over in S. Korea and would like to try n make one. Please let me know if you can help me out.

[@thetimetohunt]

@lwilliamsrdr Man I'm so sorry I could not remember who told me . You should have entered my Give away or at least said something since then . I would have said where I got the suggestion from in the video . Once again i'm so sorry . But I have to ask did this video help you out . It sure was fun making . Thanks for watching Tyler Bates

[@graceminifarm]

Where do you buy the leather like that?

[@dannyfowler2405]

do you produce a pattern for this sheath?

[@quentinjackson3778]

Great video do you have a copy of that pattern or where can I get the pattern from

[@TheLushie]

I'm with several of the other fellas - how did you arrive at the template? GREAT idea and implementation, but you went a bit fast for an utter newbie like me.

[@Bowfinger6383]

thank you. I least I won't spend money on a tool that won't do what I want it to. I would like to be able to make a die, so I can stamp or 'click' out the yoke

[@chrisvaello5838]

Where did you get your pattern

[@lwilliamsrdr]

I have yet to even think about making it, do you have designs for this or did you just make them up?

[@ediblegreens1]

Will that Rivet Dull the blade?

[@davidwatson9698]

not real familiar with this form of communication but if you could maybe possibly share how you made the pattern or template for that sheath man I'd share it cuz I'd love to make it for the couple buck knives I have thanks man for sharing your video

[@thetimetohunt]

Man i got mine at Ace hardware . But you can find them at any hardware store. Thanks for watching .

[@cobra.3886]

Sweet holster. do you sell them?

[@thetimetohunt]

@mperkins754 Thank you very much . I try hard to make videos I think people would like.

[@thetimetohunt]

@Jared432432 Yes I was. Troop 223 out of Rifle , Colorado. I did not learn this in the boy scouts . I learned every thing About leather from Dave at Tandy leathers in Nashville ,TN

[@thetimetohunt]

No it wont because the Blade rides on a nylon washer just like a cutting board . Thanks for watching .

[@carlosramayo9221]

Quisiera hacerlo las medidas son de acuerdo ala navaja si?

[@thetimetohunt]

@YOYOBOY666999 Thank you very much . That is nice to hear sometimes . I try hard to make videos people will understand and Like . It takes some time and hard work but I get a kick out of comments like yours. Thanks again Tyler From the timetohunt

[@HarperTn_423]

How much would u sell em for?

[@douglasreid9]

If a person won’t one how much and who to order

[@TheRemington270]

How did you make the templet if you don't mind me asking

[@Machito89]

Can I buy a pattern from you I really want to make my own instead of buying one I would appreciate it it's for a buck 110

[@antoniodeoliveira1849]

Do you have a template available

[@davidwatson9698]

Hey brother , I watched you the quick draw sheath and would to make a couple myself . Can you tell me how you made the template , pattern for it .

[@thetimetohunt]

I made the pattern myself . Took me about five or six times before I finally got it right . The best advice I can give you is just take it slow with a lot of construction paper until you figure out a good pattern

[@thetimetohunt]

Man you cant find a pattern any where . It took me 3 or 4 time to get it right . Just try it out . good luck and thanks for watching

[@lwilliamsrdr]

By designs I mean like PDF plans or something like that.

[@ctrichell]

Do you sell these?

[@brandonpaul8868]

Great video. I would like to make one for myself. Can you trace out a pattern on a piece of paper and email it to me.

[@davidcorral8380]

Do you have a template for your quick draw I’m handicap and I’m just starting out this hobby for myself not for sale to anyone I probably will make one for both my boys before I pass on to greener pastures so is it possible to send me a template or email me your specs I don’t have much money thanks to Uncle Sam lol but I could send some money to you if this would spark an interest in sending me. Anyways thank you david

[@glamb691]

Just a suggestion why don’t you have the pattern and parts list drawn up on a pdf charge $20.00 for PDF those that wants to make there own they’ll pay the & $20 for the PDF and you’ll make more money than your making now! If not someone will buy for $40 and reverse engineer it and make it off the PDF.?

[@thetimetohunt]

@dharper1647 I'm asking $40.00 each . I can custom make them as well with your name or business logos . I can make them just about any color . Thanks for watching my video I hope you enjoyed it . Tyler Bates

[@thetimetohunt]

@05091101 Hey man i'm sorry but they don't sell patterns . I made this one my self I had to make 5 or 6 of them before it would work . Keep trying and good luck .

[@catchndreams]

Blade rides on metal rivet. not good. leather isn't thick enough

[@catchndreams]

Catchndreams has been using a tephlon washer since 1968. Get your stories straight.

[@davidwatson9698]

Not real familiar with this form of

[@davidcorral8380]

Do you have a template for your quick draw I’m handicap and I’m just starting out this hobby for myself not for sale to anyone I probably will make one for both my boys before I pass on to greener pastures so is it possible to send me a template or email me your specs I don’t have much money thanks to Uncle Sam lol but I could send some money to you if this would spark an interest in sending me. Anyways thank you david