I was taught that what you call an "under stud" is a "Jack Stud". Jack studs hold the beam, and King studs are the studs that run the full length. Also a "relief teacher" is a "substitute teacher".
@ashlynnknight43872 жыл бұрын
in the north island a jack stud is between the lintel and the top plate, under stud is under the lintel and a doubling stud doubles next to the under stud and runs full length
@f.demascio18572 жыл бұрын
What he 🔺️ (Andrew) said. Cheers from the not so United States.
@krazzygranny70322 жыл бұрын
@@ashlynnknight4387 in the US we generally call them King and Jack, Jack is the support under the header, Lintel, etc King is beside the header, lintel etc
@sawdustsplinterz65092 жыл бұрын
"Trimmer" stud in Canada, Ontario at least... some say Jack stud due to American influence!
@dhammer56452 жыл бұрын
@@sawdustsplinterz6509 Southern Ontario, Canada here I call them cripples.
@PerkinsBuilderBrothers2 жыл бұрын
Building on mountain sides “ain’t “easy :-) Love the chute
@sniperfi45322 жыл бұрын
One of the things I love about your channel Scott is the diversity of the sites you work on and the characters you work with. It’s not very common to find a content creator showcasing what it’s like to work in the confines of an apartment to working on the side of a hill. Love your work and look forward to more videos!
@sebmstudio16972 жыл бұрын
As a woodworker and someone who has built his own home and garage, I find it very inspiring to watch you work. I've picked up many tricks that I intend to put to good use when I build a home addition in August. Thanks for sharing all of this knowledge with us Scott, your channel is one of the best out there!
@alii3032 жыл бұрын
Im a builder from Ireland. so relaxing watching u work while i have finished my days work
@luke89522 жыл бұрын
Here in Canada (Maybe the US too) a full length stud is called a king stud, the stud that the header or lintel sits on is called the jack stud, and the studs that the window sill sits on are called the cripples. Never heard of understud or relief stud.
@dylannewlands61222 жыл бұрын
Jack stud the most comon term in nz as well
@BlackPete...2 жыл бұрын
Scott, over here in Golden Bay, we call an understud "a length of bamboo". A jack stud is called "a couple of bits of manuka" and a sheet of gib is called "a few bits of ply and a hole stuffed with newspaper". The more you know...
@terrytopliss95062 жыл бұрын
Chris sounds a decent chap Scott,the project looks interesting. Thanks for the latest exciting episode.👍👍
@nickjackson85552 жыл бұрын
He is , I grew up next door to him
@terryclarke83002 жыл бұрын
In the U.S. we use inches and fractions like you use mm. For example that measurement would be 45 1/4 inch. The smallest tick mark is 1/16th of an inch and each linger mark is double the smaller mark.
@olexanderknysh2 жыл бұрын
Hi Scott, you guys are doing really good job. I appreciate attention to the detail and the way you are making sure everything fits together nicely. I live in US in Washington state and have to tell you it’s hard to find people with same deduction to quality. Everything comes down to the lowest price and rush, rush, rush… Same goes commercial and residential. And especially with all the construction boom going on, it’s doesn’t look like things will improve in quality department. At least via KZbin I can enjoy quality and know that there is places where that matters. Keep it up good work guys.
@totallynottrademarked52792 жыл бұрын
Problem in the US is people are addicted to cheap prices. If you charge what you need to to cover the actual time to do most things right you end up twice as high as your competition on pricing or you take twice as long on the schedule.
@OzziePete12 жыл бұрын
When I watch your videos, Scott, I think of my Late Dad who was an old school carpenter. Dad unfortunately died in 1985, but he would have loved watching videos showing the latest gear, like the laser lines & the electric planer. Dad used to do a LOT of manual planing & had quite a selection of planers. I'm not a tradie, but can appreciate the advances made for the workers with these machines. Must stop a lot of muscle fatigue? I saw how much it took out of Dad, hammering and sawing manually. He had to retire early but died only 8 months later.
@TheSmartWoodshop2 жыл бұрын
Hey Scott. I really enjoyed this one. Trimmers for wall framing and jacks for roof framing. What is the PINK wood? I have never seen pink framing lumber. I am guessing it is treated. Treaded in the US is green. Keep the videos coming. Chris and I are deep into our fixer with a lot more to come. Ron😎🤙
@runforrestrun19652 жыл бұрын
Ron, yes the pink here means it’s treated timber and usually has various ink stamps on it indicating its treatment grade etc. (“H4” or 5 suitable for in ground placement (posts), H1-2 suitable for interior (I think). By the way, interior wall lining here is called “Gib” plasterboard, it’s become a generic term for it as it is made from one main company in NZ and everyone simply says gib nowadays. Currently a major shortage of it, with wait times all over the country. Hey, i love my paulk table, been so handy, thank you for such a brill design.👍
@jacobmackenzie24012 жыл бұрын
He has a whole video explaining the pink wood. Search for Scott brown pink timber. 🙂
@ScottBrownCarpentry2 жыл бұрын
Hi Ron, pretty much what Kerry said. The pink stuff is our minimum treatment level, used for interior framing. Green stuff is for exterior use and wet areas. Colour-coded so we don't get them mixed up lol
@TheSmartWoodshop2 жыл бұрын
@@ScottBrownCarpentry I like it. Makes framing more fun😎🤙
@jeffmiller97782 жыл бұрын
@@jacobmackenzie2401 yeah, and don't search for Scott Pink brown timber - that's a whole 'nother channel 😀😀
@Kelvallontan2 жыл бұрын
It's great to see you on your jobsite again. I do like your home and garage reno videos, but I'm glad you don't focus exclusively on them. It is a real plus to watch you working in different conditions and with different "constraints" (sorry, I think I lack the right term here). I guess it's good to have both. I'm glad also to see you are starting to get a few jobs down there. Restarting from scratch and getting known in your area is a slow process. Keep it up.
@Dreadlock12272 жыл бұрын
Love your videos, I’m a builder in the states, but I spent 2 years working in Australia, your channel makes me miss it a lot down there. I’m thinking more and more about taking off to New Zealand sometime soon! In really miss the lifestyle and quality of life down there. Cheers man! 🤙
@DiHandley2 жыл бұрын
Hi Scott. Measuring and cutting accurately is obviously a very important part of your job. I wonder if at some stage you wouldn’t mind sharing with us some of the rules/ways that you manage to consistently achieve the accuracy required. You always seem to cut perfectly on the first go. For example the first cut you did in this video was perfect. It would take me several goes sneaking up on the length required. Cheers.
@liam67812 жыл бұрын
mm
@samthesr20man2 жыл бұрын
Measure twice cut once
@dezstepz24272 жыл бұрын
I think the more you build the better you get at it. I wasn't the best when I first began but after a few weeks I was bang on with every cut.
@nix123ism2 жыл бұрын
I used to cut aluminium extrusion for my job and it required pretty accurate cuts with a standard site drop,slide saw, what I used to do is use my thumb to raise the blade guard, without the saw running of course.... close 1 eye and align my head so I was directly in front of the blade, and move my head till i was looking exactly down the side of the blade that was going to be the cut side , line it up with the pencil mark line on the extrusion I wanted to cut, let go of the guard and then cut, worked within 1mm.....
@NOZZASLOADEDED2 жыл бұрын
@@liam6781 😂
@ulrichminky94952 жыл бұрын
Nelson in British Columbia Canada is rather similar. It is a very hilly town with Kootenay lake at the bottom. Roughly 300 meters difference from the lake shore to the upper parts of the city.
@amiscauich2 жыл бұрын
Cheers from San Francisco. Glad to see you building again Scott. & Chris is a cool dude.
@99andrianmonk2 жыл бұрын
Glad you're back to work. Always pick up a trick or new term (under stud) that will come in handy. Looking forward to your home reno; I'm sure it will be fantastic.
@meestahwah2 жыл бұрын
In the US, we call them cripple studs (that hold the header) and king studs (that go all the way to the top plate). Fun to see you on an off-site project again.
@Oxblood19872 жыл бұрын
A cripple is for the middle of an opening, either a header up, or from sillplate up to the sill of window etc. The "understud" or "reliever" would be a jack stud. en.wikipedia.org/wiki/File%3AWallPanelDiagram.svg
@galvanizedgnome2 жыл бұрын
I like to call them midget studs.
@Ngsclark2 жыл бұрын
Finally some proper Dewalt cordless tools on your channel!! 😂 Thanks for making such great content Scott and hello from a low volt / IT installer in Michigan!
@kirkk55992 жыл бұрын
"Something something fraction", 😅 laughed so hard at that because in Canada here even though we're a metric nation most residential builders use imperial and only commercial use metric for measuring.
@stupot_642 жыл бұрын
I'm in the UK and use both. Measurements will be like 3ft 5in + 2mm. That's the advantage of having both imperial and metric measurements on our tapes.
@stupot_642 жыл бұрын
@@cmmartti If you mean you cannot use both edges you are correct as one edge is imperial and the other is metric. However I've never really had a problem with this. I have not really used tape measures with measurements on the top and bottom, but I can see the advantage.
@robkirkham88732 жыл бұрын
At 33 in the UK I never really used imperial when measuring and use metric only tapes with the only exception being doors, internal doors will always be in inches in my mind, so much so I keep a ln imperial tape in the glove box for measuring up for doors.
@stupot_642 жыл бұрын
@@cmmartti I'm an industrial sparks so I'm mainly measuring for tray or containment. For my purposes an Imperial/Metric tape measure suits me fine.
@Woodementary2 жыл бұрын
Thank you Scott Brown! Sharing your life with the world is not easy. I appreciate your positive energy and creativity.
@flightographist2 жыл бұрын
Jack stud, plate to header, some call them trimmers; opposed to king which goes plate to plate.
@bryanbutterfoss46062 жыл бұрын
Another great episode. I like on the east coast of the US. We call them jack studs or trimmers. It’s funny the different terminologies in different parts of the country and world. Keep up the good work!
@gabrielescairo78222 жыл бұрын
Could the Brazilian Barbosa just give up
@roadie31242 жыл бұрын
I was interested in what's been done to stop water flowing down the hill under the main part of the house and flooding the basement. Our house is built on the side of a hill too, except ours is in Nelson Bay, NSW, AUS and not Nelson NZ. It's a pole house, so it's a bit more open. We had similar flood prevention, but probably not quite as extensive as the one in the video. We got some water ingress in a big rain event (over 200mm in a few hours and just under 500mm for three days) in March 2021.
@dontworryaboutit922 жыл бұрын
In southern California I learned an under stud was called a trimmer (what the trim or architrave is eventually nailed to) The studs that go above a door or under a window are cripple studs and a reliever is the player that takes over for the starting pitcher in baseball.
@ALAPINO2 жыл бұрын
I've been an amateur electronics tinkerer my whole life and almost every flat form Li-Ion pack has swelled after 2 - 3 years, and even sooner if used in adverse conditions like over discharge, high draw or just poor manufacture. 18650 are incredibly stable and reliable when produced with good Q&A by the main players. I have decade old battery packs from teal and red and others that are still chugging along at various diminished capacities. Most cylindrical form factor cells are just more robust, if less space efficient because of their metallic tube case. I guess I'm saying, I'm certainly not going to be early adopting them any time soon, but I'm happy yellow is pushing through with it. I hope it works out because they are way lighter than 18650 and 21700 and I'm not getting any younger.
@mitchellsichter2 жыл бұрын
Not even carpentry or woodworking inclined but I just love your videos and channel. So relaxing and inspiring and informative.
@heartwormskillcats83572 жыл бұрын
The adventures of Scott Brown. It's a wonderful adventure watching his videos.
@borisreid30532 жыл бұрын
Regarding living on the mountain.... I once lived in apartment on 5th floor in a 10 stories building. The entrance from the street to the building was between 4th and 5th floor. Only because it was so steep. And the parking was on the ground level, 5.5 stories below.
@arajalali2 жыл бұрын
I love it that you are back at work and it was a total surprise that I saw you and Chris working. Been following him on IG mostly because he's into Dewalt :) And your reliever is called a "substitute" or just "sub" in the US.
@NOZZASLOADEDED2 жыл бұрын
Dewalt FTW. So hard to say no to their line
@EricJacobson19902 жыл бұрын
We call Under Studs (first time ive heard that or Relievers) Cripples here in British Columbia. I understand that Larry Haun, and probably many other Americans, called the combination of the full length Stud and Cripple Stud a King Stud. Ive always liked that term, but it doesn't get used up here at all from my experience.
@alexjohnson37742 жыл бұрын
Larry Haun is awesome. In America I call the stud that sits under the beam/ header and on top of the sill a trimmer, and anything under that a cripple
@devonwainstein91882 жыл бұрын
No. A full stud alongside headers is a king. The one holding the header is a liner/trimmer and the studs under windows such are cripples or jacks
@samsboringchannel2 жыл бұрын
I can get right behind this new dynamic. I've followed Chris for a while on insta and definitely has the right attributes to be one of us haha. Didn't know he had a YT channel though so getting behind that as we speak. Chur!
@andrewf75552 жыл бұрын
Quite a topic really... More commonly called Jack stud or trimmer stud. Then there are common and king studs,but hey if on the tools we all know what you are talking about. Nogs or dwangs ,but the real test when framing is getting them the correct hieght and position first time. Thanks Mr Brown & Co
@ovi10132 жыл бұрын
In the US we say 3 feet 6 inches as an example the tape measures have 12 inches marked on every foot and it’s easy to say .. we also can say inches like 235 inches .. and if it’s to the Edith’s or 16’s You can say 10feet 3 and 3/8s
@salagrama-siladasi48722 жыл бұрын
I hope we can see the finished apartment here once it's complete, Scott. Thanks for taking us with you. P.S. In the USA, a teacher who fills in for the teacher is called a Substitute Teacher. :) 🙏
@WeddingDJBusiness2 жыл бұрын
Enjoy the home/garage renos but this was great to see you on other jobs - you explain things precisely . Editing is pro level and music. Maybe you could go next level and get a series on TV. Just pat yourself on the back and Jess too -
@wilsmuts2 жыл бұрын
really enjoying the time lapse build with chill music. it's a vibe!
@soy_farm2 жыл бұрын
That thing about the reliever was verfy intersting! I´m a young architect from Chile, and it would be great to see more content about parts of framing and what do you call those parts. I've learned a lot with your chanel, keep it up!
@JakMang2 жыл бұрын
In the US West a reliever teacher is a substitute teacher. Reliever is used as a replacement pitcher in the later stages of Baseball game. English is so flexible
@suzylee162 жыл бұрын
Just here for Jess cameos and to see if I might show up in the background of your scenery footage… so glad you’ve moved to town! Following your renovations closely while we embark on our own just around the corner 🤙
@williampepper24232 жыл бұрын
Hey Scott, if your looking into new timber joinery. Highly recommend joinery made to the jmf 4211 standard. I used to make it. Far superior thermally and insures you get standard, tested product. Cheers
@jlm087422 жыл бұрын
in NJ we call the king stud the one that runs all the way from top to bottom (shoe) plate (nailed to side of header), jack studs (or trimmers) are the ones that are under the header down to bottom plate. openings over 4 feet get double jack studs.
@killazftw2 жыл бұрын
Here in the states the technical term is jack stud with the king stud being the one next to it, but most people in Iowa call them trimmers
@jasonald712 жыл бұрын
Jack's and Kings when I worked in California, jack being the understud. Not really used in the UK as stud work isnt often structural. Nice to see the kind of work I used to do in San Fransisco, seems like a similar timber frame system and more interesting for a carpenter than UK work I reckon. Keep up the great videos.👍
@hammercity9052 жыл бұрын
In Canada our Dewalt batteries are 20V and 60V I think they are the same and just round up
@C_C_SEA2 жыл бұрын
Your 🇳🇿 (south island) "reliever" we call "jack stud" here in the 🇺🇸 residential construction ("builder") trade.
@johnfitzpatrick24692 жыл бұрын
G,day Scott Brown Carpentry from Sydney Australia. Great to see you back wearing your nail bag!!! And back on site. HOT TOPICS The Building Codes Board of Australia has only recently (12 months) using the NCC (National construction code, residential provisions) address the issue of building condensation. As you know, elimination of mould and airborne pathogens creates a healthy living space for the occupants. * This can be generated from surface ground water as well as rain ingress. In the same, natural lighting and ventilation during all seasons of the year is also very important, as has been recognised by past building design. Tool talk I really like the lights now being incorporated around the drill chuck: makes the job easier. Safety is number one: on site 🌏🇦🇺
@lawncharir2 жыл бұрын
Not to sound like an inches apologist, but doing carpentry with fractional has a few perks: It's really easy to do basic math with fractions. What's half of 9/16? 9/32. Double it, 9/8, or 1 1/8. It's like using metric but with no odd numbers. It's nice that our messy weights and measures occasionally work well for something.
@DiscoFang2 жыл бұрын
NZ building code standards 3604 specifically calls a jack-stud supporting a lintel a "doubling stud." (eg: Fig 8.5 and Fig 8.12)
@home-space2 жыл бұрын
Jack studs here in Wellington. Think that is what it is referred to in nzs3604. Guess it is a bit like dwangs and noggins
@rorymakesstuff2 жыл бұрын
Only discovered recently what dwangs are, apparently it’s mainly used here in Scotland, could explain the South Island link!
@DomingoDeSantaClara2 жыл бұрын
I always assumed everyone in NZ said dwangs,never knew it was different in the North Island,I come from Dunedin which has very strong Scottish roots although I didn't realise it was from the Scots,I think noggins is used in England?
@GeorgeBoltz2 жыл бұрын
In the 3604 NZ building code, those studs are actually labelled as 'double up' studs. That technically is the correct terminology. The more you know - *taps head*
@samt56632 жыл бұрын
Why was the waterproofing not installed before making the storage platform? Surely that's gonna be a regret.
@johntyson89322 жыл бұрын
I was brought up just outside of Christchurch in the South Island and had always known them as dwangs. I left there long ago and haven't heard that term for a long time.
@katrinabell76842 жыл бұрын
So good to see you building again Scott!😎🎉love your videos. Keep up the good work.😎
@margaretdagger67842 жыл бұрын
And good to see more power tools becoming smaller. Women or people with small hands find it difficult ( I do) to use a lot of the baulky power tools.
@MB.192 жыл бұрын
Love the back at work vid Scott, it definitely seems like Chris would be good to collab with.
@1LOXLEY52 жыл бұрын
😂😂 “…. and something fractions” Love the imperial conversion
@zarvwhitford3682 жыл бұрын
Awesome bonus that you're working with Chris the Dewalt demon! Two of my favourite NZ carpenters I learn so much from, leeeeeshgoooo!!!!
@jaimiemclennan59992 жыл бұрын
Feels totally weird watching you work at someone else's job!! Keep up the good work though and I can't wait to see all the house Reno updates 😀
@deroobj2 жыл бұрын
American translation: Reliever is a new pitcher in baseball - and we call that a Jack stud
@philalach33062 жыл бұрын
I call that a Jack Stud too - and yet I'm a builder taught in the same home town as Scott. Go figure?
@RegularVeteran2 жыл бұрын
the simple scratch on the top of the board you were about to sand was a learning lesson for me. you're awesome!
@RegularVeteran2 жыл бұрын
we call our reliever teachers - substitute teachers over here in America.
@Tyro2072 жыл бұрын
Hey Scott and Jess. I’m glad you guys didn’t get affected by the flooding. Someone should introduce Square Space to Dewalt (Stanley Black & Decker ANZ) people might enjoy their website just as much as your videos 🤔
@jaredgreen53052 жыл бұрын
What you call 'Understud', we call 'Jamb Stub' in Australia, and Jack Studs are the studs installed under window to frame out the wall.
@osjproductions58562 жыл бұрын
From what I can tell, the dewalt powerstack battery is 1.7Ah compared to 5Ah of the larger XR. The power output might be similar though it won't charge for as long.
@theyard69582 жыл бұрын
Its good seeing you getting after it again. I bet it feel good as well.
@josephlee73252 жыл бұрын
What you call under stud in the US we call a jack stud or trim stud or even a trimmer
@antsbantsb84302 жыл бұрын
fantastic, good fellas, both industry leaders, fantastic!
@austinengelking81582 жыл бұрын
Good to see you back out working on projects
@zachz27942 жыл бұрын
Thanks for your videos. I really enjoy watching them while taking a lunch break. Good things! -Zach in SWFL
@12ladi2 жыл бұрын
Scott u should lay dump corse membrane between the 2 by 4 and concrete to prevent the moisture to the studs atherwise all studs will get ruten I few years
@chakko98052 жыл бұрын
Reliever is a pain reliever to me, and a under stud is called a jack stud or a trimmer here Washington State USA
@OhClearly2 жыл бұрын
In the US we call those Jack Studs. Its very interesting to see the different terminology between US and New Zealand!
@trevordarby4672 жыл бұрын
Brilliant great to watch here in the uk
@tristanpatterson38432 жыл бұрын
I'm between you both in Wellington and have never heard of understud or reliever stud. We call them trimmers. Under the sill we'd call them jacks. It's dwang too BTW.
@Bolockaye2062 жыл бұрын
Started this huge job a month back and I’ve been doing demo ever since. Seriously ready to get back to building again
@gabrielescairo78222 жыл бұрын
I understand that Scott Brown comes from a line of contractors however he does a great job at doing what he does experimenting with new products and teaching other individuals to update their sub systems
@philclennell9 ай бұрын
Interesting that there are so many timber builds given that most of NZ is at risk from damaging earthquakes. Maybe the timber homes perform better than brick during these natural events.
@phillipbridge50092 жыл бұрын
The power pack battery will probably be more difficult to repack and also I cannot see how the heat can be better dissipated unless they had heat tubes to the outer casing. So harder to repair and shorter lofe if higher heat temps while charging at same amperage.
@f.demascio18572 жыл бұрын
I think they run a heat sink between them which vents to the outside of the pack.
@joehart38262 жыл бұрын
Does anyone rebuild packs anyway...??
@default97402 жыл бұрын
@@joehart3826 maybe in countries where labour is really cheap. In New Zealand, a repack would be at least 80% of a new battery, if possible.
@rerolley2 жыл бұрын
In the US we would call the relief teacher a "substitute" teacher and a reliever is a pitcher in baseball who enters the game to relieve the previous pitcher.
@Joinerjack Жыл бұрын
FROM BEHIND! Love your videos definitely like to see Jess do a garden episode
@more.power.2 жыл бұрын
Scott great episode Nelson is very beautiful and looks like a awesome place to live.
@dakarpsi2 жыл бұрын
What's with the magenta studs? I know in the USA there's one company that makes them slightly water repellent with a magenta paint.
@garymorton9426 Жыл бұрын
H1.2 boron treated timber
@macroxx64762 жыл бұрын
question for the regulars is the wood they use in video fire treated ?
@brucelee33882 жыл бұрын
Comes in pink and blue, one is termite and rot treated, the other is termite only, I think in that order (at least in Australia).
@gjcoop56252 жыл бұрын
No. The pink colouring is to show the pine timber has been treated with boron to prevent borer infestation. The bottom plates of external walls are treated differently in case they get wet.
@WITEBRED1122 жыл бұрын
I was just doing this kinda framing yesterday, we call those boards "trimmers" here.
@robertbamford82662 жыл бұрын
Relief teacher. Aha - “substitute” in the US. Also spelled v-I-c-t-i-m at times. Requires special skills. I still have my 18 volt dewalt recip saw - with a 20 volt adapter. Noticeably more power. (And added bulk not a problem.)
@10soccerismylife2 жыл бұрын
I've heard all sorts of names for that piece. I've heard jack studs, cripple stud now under studs. Nice. Always enjoy watching your videos
@sirjohnman2 жыл бұрын
Don't know how but I was brought up in Scotland using 'dwangs' as well 😅 Never knew it was a NZ thing as well
@tonylittle35082 жыл бұрын
Well large Scottish settlement background in the South Island so I guess that makes some sense.
@arieveloo98082 жыл бұрын
Thanks for this very nice episode we love it!!!
@dack65282 жыл бұрын
@5:11 Get a 3d pen if sanago can do the things e does, I am sure he could fix that lid, well at least put a a coating on to look neat
@nmtbhtp19902 жыл бұрын
Ahh so cool you are working with Chris!
@jstimen19062 жыл бұрын
Where I live in the US we call them king studs (long stud) and a jack stud (the stud supporting the beam).
@Michael-wq8qu2 жыл бұрын
Reliever is known as a Jackstud in Otago and Southland.
@MichaelArthur4eva2 жыл бұрын
Definitely learning some good skills from you Scott as a serial DIYer
@craigchristensen60822 жыл бұрын
From the South Island of NZ. Always known them as king studs and jack studs. A reliever is the relief teacher.
@kurt90552 жыл бұрын
Great to see you to legends working together
@default97402 жыл бұрын
Quite intense at 17.20 there Scott. I suspect there was a reliever once that you would have liked to know better? I remember a few like that😂
@edwinfarquhar70002 жыл бұрын
Hey Scott and Jess, would you be interested in having a discussion about sustainability? Hugely enjoy your content, I admire the amount of love you both put in to what you do.
@1971merlin2 жыл бұрын
Why saw the treated end off the stud, only to spin it 180 and cut the other end to length? Why not keep the sealed end as is? Not cut square from factory??
@ScottBrownCarpentry2 жыл бұрын
Yeah, almost always out of square. I cut it as a matter of course.