Weekend Modder Jrunner + extras download

Raw Mega.nz link:
mega.nz/file/O...

[@TheWeekendModder]

Download link: mega.nz/file/OmJnVYpK#voMa9v73bPWHQY4_dfXRdcUmWVPb2hpQ2xb5aDimEhU

[@maderzz1]

still uploading new link for j runner absolute Massive legend mate

[@purpletonberry804]

We still exist, first timers modding our old 360s in 2021. Thank you so much for all the information you've put out there for us!

[@twqzjsidIsndusiakdixisqjeksixi]

Thanks WkndModder! First time modding a Corona MoBo...

[@anthonyaviles8665]

It only has dash version 17599

[@twqzjsidIsndusiakdixisqjeksixi]

@@anthonyaviles8665 update

[@demonslayer9101]

Thanks very much for this. You helped me RGH my Trinity and I will be forever grateful. You the man!

[@timmyfingaz100]

wow been searching for these files and they where here all along!! thanks, really want to get some stuff from your store to support your hard work!!

[@KushModzHD]

Thank you for making this Video much appreciate it (:

[@TheWeekendModder]

I've collected a lot of good info - shame not to share it!

[@anthonyaviles8665]

I downloaded your j runner and extras pack but only has dashboard 17559 on it non of the other dashboards does that matter Please help

[@user-xn3kt6bn5r]

Awesome I was so scared these were lost :0)

[@RadBillions]

thanks but what timing file do i use on the nandX to write the "muffin" to Matrix V1

[@andrewbailey6382]

Hi everytime I try to run jrunner I get a message saying unhandled exception has occurred in your application. I have installed all updates for windows 7. I have installed it to my desktop, and directly from there, but I'm not sure if that's okay. Jrunner can see the raspberry pi pico, but if I press read nand I get this same message. I have my xbox 360 corona 16mb 2 wire chipsets mod, but I cant get past this issue. Any help would be much appreciated, regards Andy

[@youcantstopme5136]

How come when I open the jr programmer the jr is missing from it I had it open and the jr was there but not now it's in the left corner

[@hsp3394]

hi, do you have a link for jrunner with the new update that was released this month? i tried to add the dash as per some video but im getting error when i do the xebuild image "necessary files missing" something like that. thanks

[@TheWeekendModder]

I don't yet - but will post mine once I update it.

[@nickseamus7340]

Checking out all your videos in 2020... getting ready to rgh a Corona v4... already bought all the kit from you... if this works, I will *absolutely* grab your package any time you ask...

[@joeypr]

Awesome man, thanks for this!

[@jeweltimothy2517]

good day mr weekend modder im trying to rgh my xbox 360 and im on the 17511 dash when i open j runner i have to use the 17489 dash but im only getting the option for glitch 2m when i use this it boots into xbox 360 dev kit and i dont want this i downloaded one of your 17511 jrunner built in but it dont have the rgh3 function please help me thanks so much will be waiting on your reply thanks so much

[@TheWeekendModder]

This build is way old, you want a new Jrunners build. Look on WeekendModder.com under the guides section and my rgh3 tuts have links to updated jrunners builds

[@MrItrollaround]

I've soldered my wires for the JR-Programmer. Mine came with wires and the main wire you plug in to read the nand fits but doesn't go in all the way and does not flash the green and red lights when the xbox is plugged in. Any thoughts???

[@TheWeekendModder]

Why are you expecting flashing green and red lights? Does the JR Programmer indicator LED come on when plugged in via USB? What flash config do you get if you attempt to read the nand?

[@MrItrollaround]

The only light that comes up is the green when i plug in the usb cable to my computer. I have the 17511 but all it says the console version 10 and 0x000000 something like that.

[@TheWeekendModder]

With an all 0 flash config its usually a soldering issue. However it could be an issue with your JRP. Maybe try re-flashing it's firmware to it - i've seen that fix issues in the past.

[@MrItrollaround]

Ok. I'll redo the soldering. Now the thing is the wires you solder has the end piece that fits into one of the ports on the Jrp, it has the same shape but doesn't go in. I've tried the other 2 ports with my other cables and they fit perfectly and go in all the way. The port that should be plugged in with the wires soldered on the motherboard is the one for reading the nand. I'm just stuck there. I don't want to ruin it.

[@tboyz1]

awesome resource subbed thanks

[@eliasj.363]

All I Can Say Is Thank You

[@xci-rg4lf]

Hello, when can you possibly able to do a tutorial on Ace V4? on a Xbox slim corona? Keep up the good work. Your videos are helpful.

[@maverick4270]

Hey man, new to the whole RGH console thing. i'm super intrigued on doing this to my xbox but i have a couple questions. I have an xbox 360 slim. i'm not sure if its a trinity or not but my main question is which method do you recommend the most if i just wanted to host online hacked lobbies for black ops 2? this is probably a dumb question but i've been researching lots. I only know that i need to keep my keyvault unbanned but i'm not sure what chips to buy and what not. i did install this program

[@TheWeekendModder]

The method for modding it doesn't vary based on your goal being to run mod menus. The method for slims is all technically RGH2, and that varies by the model of motherboard you have.

[@drewconley6444]

Thank you so much

[@AndresJesse]

Thanks for sharing!

[@chewbaccasaurusrex692]

Would a cool runner rev c work with a trinity board?

[@TheWeekendModder]

You could do the "CR4 Muffin" technique using a Rev C on a Trinity. weekendmodder.com/store/image/catalog/Trinity_Rev_C_Muffin_Install.jpg

[@melloedilson2813]

..Thanks Bro...!!!

[@somdtee2542]

im trying to figure out, how to download the J-Runner v.03 beta and add a dash to it... and everytime i plug my Jr programmer to the pc it wont show to logo??

[@TheWeekendModder]

If you download the package linked here it already contains several dashes including the current. Adding a dash is completely unrelated to your JR Programmer issue - that would be a driver problem.

[@somdtee2542]

TheWeekendModder ok so how can I solve the driver problem?

[@somdtee2542]

TheWeekendModder or is it just bc I'm on windows 10? Or it doesn't matter...

[@MyName-kp8vy]

Awesome,thanks.

[@pkf4124]

looks like the file is corrupted, can you fix it please

[@oGallaxy]

I need help!!! Everytime i try to find the nand type... it says Version: 10 Flash Config: 0x000000000 Can not continue........ How do i fix this!!!??

[@TheWeekendModder]

Resolder your nand wires in -bad soldering is the most likely culprit.

[@oGallaxy]

TheWeekendModder thanks i fixed it

[@hecticxhabib4990]

hello does anyone have the 17559 version of this pack?

[@Michiganwetland]

Can you please show me how to install drives?? For j runner

[@listeningreadinguniverse9386]

amazing. thanks a lot

[@robjohnson3061]

Hi when i dowload your j runner i do get the jr logo and it dosent detect my console any ideas what it could be

[@TheWeekendModder]

If you get the JRP logo, then that just means your drivers are installed. If you get flash config 0x0000000 then you've probably got a soldering issue.

[@david34399]

so I have a xbox 360 phat ..... this method will work on it ? Kernel version 17511

[@TheWeekendModder]

RGh 1.2 would work

[@georgiemondragon7916]

thank you

[@edyt4125]

Thank You!

[@julianlozano4915]

oooo thank u lol no wonder why I messed up

[@hefty6147]

Please could you show us how to download the files

[@uhRemedyy]

Weekendmodder, do you reply to your emails as I have some questions

[@TheWeekendModder]

I reply to most of the emails I get, though I don't really do support for DIY installs for people. But if you have some question about something I sell or a service I offer, then yea I deffo respond to those.

[@uhRemedyy]

Well, I was going to attempt to RGH my retail slim, but I was im not sure what it would be a Trinity or a Corona, if you could help me I will email you

[@Anonyi]

You can check by looking at this : prntscr.com/eqlz2u

[@TheWeekendModder]

Check out this image: i.imgur.com/4i0wvNL.jpg

[@geovanyguzman2678]

hi friend rgh 1.2 jasper bb glicht matrix v3 i do not xell usend you diagram

[@julianlozano4915]

Can u do a vid on rghing a corona with a coolrunner

[@TheWeekendModder]

No. I use Aces on Coronas.

[@julianlozano4915]

Ok is possible cause I have so much trouble rghing my corona cause no one does the coolrunner thank you for replying

[@TheWeekendModder]

With a Rev A, B, or C it wouldn't be possible without an add-on. With one of the clone "rev D" it would be as those have their own crystal for stby_clk

[@scottrocks1993]

Do I use version 17559. If my Xbox 360 jesper is on dashboard 17526. If someone can please tell me

[@TheWeekendModder]

What you "use" is the target dashboard version. So as long as it's at least the same or higher than the dash you started with you are fine.

[@dementedabyss3247]

Is this still currently up to date?

[@TheWeekendModder]

The pinned comment has an version that bluesnow was kind enough to update to current dash.

[@karimanser1696]

Thanks

[@sonicwolfsdutch]

when i create a ecc i just get this ECC created and i think i bricked my console and i get this Version: 10 Flash Config: 0x00000000 Can not Continue

[@TheWeekendModder]

ECC created is all you should see. The flash config bing 0x000000 is a separate problem. Double check your soldering.

[@joshwhite2749]

Please help j-runner does not launch and no files can be open

[@TheWeekendModder]

That's not much info to go on... right click run as admin? What error are you seeing? Give as much detail as possible.

[@joshwhite2749]

I've got it so all the files will. Open but jrunner the application will not even load and I've tried admin as well

[@joshwhite2749]

Do you now what is wrong ?

[@TheWeekendModder]

Based on the very limited information you've provided, no - I have no idea. It's specific to you.

[@zyphergamez5931]

it didn't work for me as well

[@julianlozano4915]

I'm gonna buy ace chips off your website so if I have a corona and I install it I don't have to program it

[@TheWeekendModder]

Correct.

[@juanjcampos3985]

Awsome!!! Thank you very much! if you have a Paypal donation site please share it to complete

[@Moremusic-less-war]

Is this updated? xx

[@TheWeekendModder]

It's 17511 which as of today is current dash.

[@giovannivargas4841]

do you have a business email??

[@TheWeekendModder]

[e-mail]

[@omar20ism]

y la carpeta muffin ?

[@TheWeekendModder]

They're in the Jrunner download.