They Almost Wrote It Off...

[@Ben72055]

He listened to his community about his previous sponsor, have to respect Rex for that as I'm sure all of these projects for his videos are not cheap! Heaps of respect bro your a legend. EDIT: I personally don't judge the sponsor's as its easy enough to skip through the ads and helps toward making these videos quicker and better.

[@troy7788]

What was it?

[@TimMoore-gv7hu]

​@@troy7788 pretty sure it was temu

[@Jacobtheunwise]

I don't get the whole Temu issue. Been buying crap from them for since they started and never had a issue problem ​@@TimMoore-gv7hu

[@BenjiluvsHondas]

@@TimMoore-gv7huit was

[@jackjfjfjf]

It was definitely temu. They've offered thousands of youtubers sponsorship. I don't see a problem with it, you get what you pay for so don't expect good shit.

[@aussiehsv559]

Good of him leaving a note not many people will

[@thatplantdude7492]

Truck took out my highly modified RX8 I'd owned and built for 12 years while parked at work, Was absolutely devastated as it was structural so they wrote it off. Only got a 12k payout. Also own a 323 SP20, so with the payout money, spent 12k on a massive audio build for it for competition purposes.

[@rpenrose24]

Your gonna make a great parent one day Rex. " I don't know what I'm doing, I'm figuring it out as I go, and doing the best I can with what I have."

[@RexH]

hahahaha thanks bro XD

[@doomshamin997]

Is that lancer like the 97-02 Mitsubishi mirage de coupe 1.5l 4g15​@@RexH

[@keatoncreates]

PSA for the inner tie rod, use locktite and the locking washer that gets folded over the flat spots on the inner tie rod. I had a Mirage and it undid itself and popped completely out of the rack because no one put the lock washer on....Lucky it happened ion a car park

[@barra245t2]

I used to be a bit average about remembering to put on my safety glasses,that was until one of those little bits of wire flung off the wire wheel and hit my eye piercing into the white.i never forget my glasses anymore

[@TomBudin]

yo man add a turbo brace to your downpipe - mount it to the block for extra security or add some support for the manifold in some way if you can, should mitigate the cracking issue

[@TheMadman457]

You can use a flap disc to quickly remove paint rather than the wire brush. Make sure to get all the wire bits out of your clothes. You tend to find them a long time after 😭😭

[@speedchopwtf]

not too bad results for being a beginner. If you put that wiggle wire right on the edge of the 1/4 you can pull that whole body line out and eliminate the bumper gap. get a new retainer and keep checking your fitment to the bumper. check under the bumper too. there is usually hidden damage there holding the 1/4 in.

[@deakindalli7292]

A uncle of mine over 20 years ago had a lancer that was just like this one , same colour and had the two doors as well. He passed before he could do anything more with it

[@aidanmurphy4963]

Rex much respect for listening to your fans when it comes to thinking about the sponsors you plug in your video's. Your right the sponsors do help to provide you the cash to make these videos but that doesn't mean you have to take dodgy sponsors. Your content is great and i will gladly keep watching.

[@supaslimey4181]

Definitely would’ve got a panel shop to repair this. Big job

[@Ismaak5]

You need to go buy bodyworking hammers and dollies if you want to do a good job. The metal wont go back to how it was simply by pulling the dent out, you need to hammer it to straighten it.

[@Pete-hy4mq]

Because the metal on guard is streached it not recommended to just pop it out you have to slowly shrink the panel back by tapping around the edge whiie pulling the dent out or it will just keep popping back it and just wont get in straight

[@mazlo170]

I remember working at coles with you bro, So happy to see you doing your thing! Big ups Rexi

[@Coolwow437]

Hey Rex for next time you should install a dash cam, or camera at your house for privacy and if someone hits your cars 🙏🤞

[@vNxrzy]

so mint to see the progress in your videos, you should definitely be proud that your pumping out videos and being able to "fix" ya lancer is sick bro!

[@randompep.491]

LEZ GOOOO NEW DRAKE COLLAB

[@RexH]

started from the bottom now we're here

[@kkarnis3791]

Maybe need some kind of brace on the turbo so the weight of it doesn't crack the manifold.

[@Andrew_kiwi_AF]

Where I used to work we would park cars on the road at 6am before all the car parks went for the day, one morning we had a rubbish truck back over a brand new $200,000 Audi. Car was meant to go to the customer that morning :( stupid rubbish truck

[@AngryXr6]

you guys sue?

[@georgegoodall3573]

a rubbish truck took our my car on wills street glen iris , was so pissed the council didnt care at all

[@melbournehoons8268]

was that the yellow Holden Monaro, if so i saw that on dash cam owners Australia

[@muz3307]

That was one of our guys hahah i service that area

[@unfknknown9678]

​@@muz3307🤡 drivers

[@ham_sanga7]

thats looking tuff. little love dents are unavoidable on cars of that era but you did a mad job with that dent tool

[@Luxstato]

I was watching for 2 minutes thinking you recorded this upside down but I had screen lock on 😂😭😭

[@bill13690]

Great content, there Rex and I'm sorry to hear what's happened to your Lancer, but at least you're able to fix it yourself. In about half an hour, I should have another video uploaded onto my channel.

[@morri2087]

thank you for the consistent uploads bro always entertaining

[@RexH]

thank you sir!!! trying my hardest

[@doomshamin997]

​@@RexH hey bro I had a ? Is the lancer the exact same as 97-02 mirage de coupe 1.5l

[@heheheehehehehehe185]

Time to make it a wide, it can hide most of the damage and it will look better too!

[@autoaus]

Same thing happened to me, a little worse, same side 😢😅

[@retrobear9367]

Here in the US. That was the Mirage. Sadly the Mirage has turned into something that looks like a Honda fit😢

[@Jacobtheunwise]

The mirage was built at the same time here but is a different car

[@L0ckyb0ss97]

Where did you get your turbo and manifold from I’m chasing one 😮‍💨

[@trayner]

Make a bracket to hold some of the weight of the turbo or it will keep happening

[@Baz9667]

Pretty sure Mike Lake is handy for a color change... Slip him some cash for it 😅

[@grahamford9646]

Tap your highs down as you pull out the lows

[@MrNoahFerris]

Would've been higher quality content if you finished the panel in the one video, we don't mind waiting for more complete videos.

[@StanleyKubick1]

congrats man, looks a million times better and ready for da bog™next time you're pulling metal, start from the outside of the dent and work your towards the center. it will give a better result.

[@Trinx999]

Hey bro you should make a custom headliner in one of your skylines it would look sick !!❤

[@lancerck2a.miguel]

Hi mate! Subscriber here from the Philippines. I happen to be in the process of building my Mirage as well. Your Mirage build has given me a lot of good tips. Curious though, what's the spring rate of your coilovers?

[@Gooie69]

Those swaybar link nuts won't last long. Get some nylocs on there.

[@Falconxr8]

Oh man, what is it with the poor lancers getting munched!? I had someone swipe the whole side of my lancer writing it off.. Thankfully I did what you did and took a payout and fixed it myself. People suck 😭

[@jarnbjorn4522]

this car is 🔥, please convert it to an evo. we have a 2 door pick up truck converted to an evo 3 and it looks fire.

[@stevebromley8545]

Have you thought about going for a full evo 4 kit on it ?

[@loganparkinson4386]

That’s so disappointing but she’ll be right bro🤙🏼, great vid and ordered one of the new tees🙌🏽

[@candycain1527]

All great warriors have battle scars, lancer is an absolute powerhouse 💪

[@candidosilva7755]

My budy had a Hyundai s coupe turbo also 1.5 turbo and that thing riping made me scare as f..... it had a biger turbo also. It was crasy what a 1.5 could do it was a mean crazy car.

[@itsmikelake]

NOT THE LANCERGHINI! Broo this is so rough, but I love your positive attitude. We will rebuild! P.S. HOW IS THAT 4g15 STILL RUNNING?! Haha

[@kriswhite9324]

When is the 125cc turbo drift kart happening love the content from WA🤙🤙

[@x-zavie-r]

hey how is the bro the cancer hope hes doing well

[@RexH]

He's doing great man! A lot of you guys contributed to support him! Can't thank you all enough

[@kevinbowman3592]

Go with a widebody buddy, cover the damage up

[@joe-dixon]

Hey Rex can you please let me know what the part numbers are for the rear toe and camber arms are thank you

[@manuellopezej1]

Do a 2.4 swap on the lancer and go for more power

[@NEOVVL.]

Great job with the dent pulling 👍🏻

[@1993Revhead]

They may have disrespected the lancer. But they gave us content by hitting it. 🔥

[@RedNoise-hz5nh]

theres a comment in the bots

[@sugarbombs6884]

Bad!!! 🤣🤣🤣

[@ahhoeg4mx]

whats the name of the song when the video end?

[@Mr.Klassik]

You need some rear disc brakes

[@doomshamin997]

@RexH Is that lancer like the 97-02 mirage de coupe 1.5l

[@TheRealSeanMacGuire]

Bro why did the gov not pay for it?

[@Andrew_kiwi_AF]

I love the sound of this! 😊

[@sunsettokyo9887]

Weird question but have you ever thought about getting a e46? Or something German?

[@dylanlangheim05]

You should work the dent back so u should start and the end of the dent and work your way back to start it will come out alot easier and better result my dad taught me and he was a penal beater by trade

[@gamingvenom3379]

best part is i have the same damage on my B5 :D

[@rc70ys]

Where’s your missus ? She hasn’t been a video for ages bro

[@Aiidennn]

who’s his misso

[@_gtaskncvgangg2517]

I love that car bro nice concept 👌

[@macdouglas1087]

Good job bro

[@thybigshow]

Real

[@turvboi007]

Real

[@AngryXr6]

i forgot you had a lancer

[@AngryXr6]

i used to own a evo x with 794 kw at the engine itself but it blew 7 years ago when i was tinkering with the cams and turbo, sold the body. kept the engine.

[@INFOAU44]

Love your vids bro

[@rodrop88]

Is Daniel natty?

[@ghostp7919]

@Rex H hay man I have a asti v 1.3 the same car same colour can U send me on some links to the stuff you got for it I'd really appreciate it it's exactly how I want my car done 👌keep the vids coming bro!🙏

[@Master-Hyland]

Shmick

[@eshaylad8970]

Rex I love you 🥰

[@tturi2]

evo 22b

[@James.Schiliro]

Love it

[@jayonbikes4271]

Just finish the side panel before posting it. It's just a small panel. Body filler, sanding, repaint. It's easy bruh

[@lungers8771]

in before old mate comments from Mount Gambier South australia 🤣

[@RexH]

Hahaha good old Bill! 🤣 he’s a legend

[@Pharrell1]

More lancer contentttttttttttt

[@gezalinko7437]

In Europe they are writing off older cars regardless if they are repairable .. it’s their way of forcing you to buy EV’s

[@bling2332]

one