They Said I Couldn't Mow THIS Overgrown Monster Field with Ventrac Tough Cut! Lets Prove Them Wrong!

[@ldiane5462]

Hi Cameron! This might sound girly; but that Ventrac cutting through that field is beautiful!! And, to me, the icing on the cake is seeing the deer run through. Take care and God Bless. Sincerely, Diane 😊

[@TheLawnCareLifeinMowssouri]

Absolutely! The Ventrac is amazing. And the transformations are even more amazing. Nice views from hillside and even better when the deer decided to cross in front of me. Lots of fun on this one. Appreciate your continued support. Have a great day and as always #GodProvides

[@snoopysrc]

​ 16:51 16:54 16:57 16:59 17:03@@TheLawnCareLifeinMowssouri looks like fun on the ventrac

[@johnkranz4004]

The machine handled that very well. Nice job.

[@TheLawnCareLifeinMowssouri]

Ohhhhh yeah. 👍 Thanks for watching!

[@miker8915]

What an amazing transformation. It's so nice to see wildlife running through your video. Great job

[@TheLawnCareLifeinMowssouri]

Thank you! It was fun to watch the transformation. And the wildlife was definitely nice to see. Fun job all around. Appreciate you tuning in!

[@andthatsthewayitis4173]

Big hello from El Dorado Springs MO! I used to live on the other side of the state in Ste. Genevieve. I miss that side of the state, it's more beautiful than the prairie side. Enjoy watching your videos just to see the beautiful countryside! I hope your channel grows, your content is just as good as everyone else's.

[@TheLawnCareLifeinMowssouri]

How are things going in El Dorado Springs?! It is nice and sunny here. Temps in the 60s! I appreciate you taking the time to watch. Thank you for supporting the channel. Let’s grow it in 2024! 👍💯😎

[@andthatsthewayitis4173]

​@@TheLawnCareLifeinMowssouriyes the temps here now reach the low 60's. Yes I can't wait for the mowing season. I'm disabled with a prosthetic leg so using the brake on a Rider was hard. I bought a used zero turn Cub Cadet and just love it. Unfortunately last year we had a bad drought so I didn't get to mow much. I'm hoping for a greener year!

[@triniharp8745]

Wow dude that's awesome, gotta know how many acres was that, great work be careful

[@TheLawnCareLifeinMowssouri]

Thanks a lot! This was around 15 acres if I remember correctly. Appreciate you watching.

[@ruthstory2277]

Never doubted you and your VENTRAC!! Beautiful job Cameron!!

[@TheLawnCareLifeinMowssouri]

Thank you for keeping the faith! Appreciate the support!

[@upscalelawncaremonroe408]

The Ventrac went right thru it!!!!!!!!!!!!!!!!!

[@TheLawnCareLifeinMowssouri]

Ohhhhhh yeah! 😎

[@mickeylaster1627]

Hi from Arizona. Wow that was an enormous endeavor. Both you and the beast of a machine did a wonderful job.

[@TheLawnCareLifeinMowssouri]

Hey Mickey! Thanks for tuning in from AZ. 👍 It was definitely a BIG job to tackle. The Ventrac was able to get it done though! 🙏 Appreciate the support 💯

[@jameswarren423]

Gotta say that ventrac did a great job very impressive, and you did a great job!

[@TheLawnCareLifeinMowssouri]

Thank you! Appreciate you watching. The Ventrac is one bad machine.

[@ryanfoley9999]

Great job Cameron ❤❤❤

[@TheLawnCareLifeinMowssouri]

Thanks, Ryan! Appreciate you taking the time to watch. 👍👍👍

[@kravchan]

That was an eye candy video all along, thank you 👏👏👏

[@TheLawnCareLifeinMowssouri]

Thank you for watching! Want to see more vids like this?!

[@kravchan]

@@TheLawnCareLifeinMowssouri 100%

[@TheLawnCareLifeinMowssouri]

I’ll keep them coming!

[@johnmiller2278]

That Ventrac is a Beast.

[@TheLawnCareLifeinMowssouri]

Yes sir! 💪

[@bitteroldman2714]

Seems like that big of land would be good for grazing. Looks nice mowed down though. Thanks for the video.

[@TheLawnCareLifeinMowssouri]

Yes it would! Put a fence up and let the animals roam. Thank you for that. And thank you for watching.

[@damienmcleod2622]

Great job. I really enjoyed watching.

[@TheLawnCareLifeinMowssouri]

Thank you! Appreciate you taking the time to watch.

[@medlinlandmaintenancellc]

It was a perfect application for the ventrac to handle. Ordinary tractor would have taken longer just on turning radius alone. I don't think a job like this can be too big for the ventrac. Looks good!

[@TheLawnCareLifeinMowssouri]

The Ventrac had fun out there. Took a while to knock out, but the Ventrac handled it just fine. Traditional tractor wouldn't have been able to climb some of those hills. It was pretty steep in places. Appreciate the support. 💯

[@Ladybug-j3p]

Good job, fun to watch

[@TheLawnCareLifeinMowssouri]

Thanks so much! It was a fun one to tackle with the Ventrac. 👍💯😎

[@derinf]

Awesome video and cutting!

[@TheLawnCareLifeinMowssouri]

Thank you for the support!

[@billyhudson2533]

That's a massive yard!! Another great clean-up!!

[@TheLawnCareLifeinMowssouri]

Yes!!!! This is a HUGE job to tackle. But it’s a fun one as well 😎

[@raybeadlejr6838]

I love that unit. if I was still in business, I have one &, I have one with four-wheel-drive diesel so many attachments you can put on without getting out of the seat oh the hydraulic diesel is the strongest unit on the market..so many accessories bless you brother. love this unit

[@TheLawnCareLifeinMowssouri]

Yeah, that Diesel engine would be nice! They say it just sips the fuel and will hold up for a long long time! In the future I would like to get the Kubota gas engine. Surprisingly, it has the most power out of all of the engine options. Maybe someday you'll see it here on the channel! Take care and have a blessed day! #GodProvides☝️

[@ARCSSelfDefense]

Damn! Huge job with that machine!

[@TheLawnCareLifeinMowssouri]

VERY HUGE! Ventrac is a beast! 💪

[@JaxonHayesPlays]

Hi Mistur cam, you are so awesome for my dad and I too watch so yes thank you Mistur camcam, I hope it’s ok I call you camcam

[@denbowlawnlandllc]

Another quality job buddy

[@TheLawnCareLifeinMowssouri]

Thanks a lot! I needed that flail mower on this one...

[@andreacantrell35]

Chan GED the look v that pla e.looms great.

[@TheLawnCareLifeinMowssouri]

Thanks for watching!

[@rickmurphy3598]

Fun to watch the transformation.

[@TheLawnCareLifeinMowssouri]

Glad you enjoyed the video!

[@johnmiller2278]

Great job!!!

[@TheLawnCareLifeinMowssouri]

Thank you!

[@thomasstrand9853]

Amen God does provide nice job really bumpy though

[@TheLawnCareLifeinMowssouri]

Absolutely! Thank you so much. It's definitely a rough ride on this one lol.

[@dianapierce-qu5eu]

Excellent job.❤

[@TheLawnCareLifeinMowssouri]

Thank you! Appreciate you watching.

[@EdHanson-l7w]

Another great vid and most satisfying. Not sure if you know how satisfying it is to watch you mow in time-lapse, but I always walk away from your vids feeling very complete and fulfilled. That has got to be therapeutic for you just watching ten feet in front of you. I feel myself coveting a bit watching you. On another note... Do you have to constantly centerline that steering wheel after so many jobs? Does it have a centerline calibration, or does it matter? I know you work in "Mowssouri", but I wonder if there is a guy like you doing this in the "Mowjavi" Dessert raking sand dunes and blowing tumbleweeds. Hmmmm, something to ponder. 🤔

[@TheLawnCareLifeinMowssouri]

Oh wow, this is nice to hear! Thanks for sharing that. It is definitely satisfying to see the transformation take place a little at a time. Looking back, it's hard to believe I tackled all of that. But the Ventrac got it done yet again! I've never messed with the steering wheel. After a few jobs, that Ventrac knows exactly where to go. As a matter of fact, I don't even remember moving the steering wheel on this huge job. It's like it just takes over and gets the job done haha. Thanks again for taking the time to watch and comment. Have a great day! 👍😎

[@JohnBraman413]

that ventfrac is also good at snow removal.

[@TheLawnCareLifeinMowssouri]

Would love to try it out in the snow!

[@chrisfinney1905]

Ventrac for the Win!

[@TheLawnCareLifeinMowssouri]

Ohhhh yeah!

[@liliamrabelolemos9949]

Excellent job ❤👏👏👏

[@TheLawnCareLifeinMowssouri]

Thanks for watching! 👍

[@Maybe1Someday]

That looked fun. Man I need to get a property as an excuse to get a Ventrac

[@TheLawnCareLifeinMowssouri]

It was a lot of fun to knock it out. Don't worry, once you get a Ventrac then you'll have plenty of properties to tackle with it!

[@maureenball6733]

So satisfying! Neatly shaved.

[@TheLawnCareLifeinMowssouri]

Glad you liked it!

[@gregwilliams386]

Nice machine!

[@TheLawnCareLifeinMowssouri]

Thank you! Appreciate you watching!

[@johnfuller8147]

How long did you take and how many acres was that Cameron?? Great Transformation,...love the content and the back ground music is relaxing!!

[@TheLawnCareLifeinMowssouri]

With the power line and the big monster field, it was about a week of mowing. I want to say it’s around 15 acres total. Lots of sketchy areas where you have to really watch or you’ll end up flipping the Ventrac in the washed out areas. Appreciate you watching the transformation. Glad you enjoyed the music 😎. Catch you in the next one, John! 👍

[@johnfuller8147]

@@TheLawnCareLifeinMowssouri Looking forward to all your videos...Great Content!!!

[@PoopyPants-1955]

You made that look like a walk in the park, I’ll bet my Hooskie-Varnie zero turn could handle that. 🤪

[@TheLawnCareLifeinMowssouri]

YeeYee 🤠. Haha...thanks a lot! Appreciate you taking time to watch. Ventrac is a machine!

[@josei.puente6812]

I work with a special district in California and it has 7 miles worth of levee and it has a vantrac 4500y to mow. It takes about 4 to 5 hours to mow 1 mile depending on the area.

[@TheLawnCareLifeinMowssouri]

Oh wow! How does the 4500y Diesel engine handle all of that? Does it move through it pretty good? I've heard the diesel is underpowered compared to the Kubota gas, but I've never had the chance to try it out. That's a LOT to tackle with a Ventrac. Seven MILES!!!!! That's a full time job!

[@jamesevans20]

I would have loved to hear that governor working in the tall grass & steep hills Good video anyway I’ll bet you’re channel has sold a lot of Ventracs Suggest you become a dealer.

[@TheLawnCareLifeinMowssouri]

I recorded most of the job in time lapse mode because it was such a big job. And no audio when you record in time lapse. I'll have to get more real time footage next time and let you hear the machine work. Appreciate you watching. There have been so many ppl reach out over the years to tell me they bought a Ventrac after watching some of my videos. Pretty wild! It would be fun to be a dealer, but I have more fun running the machine all day long!

[@MrLangDog]

Holy smokes!!! Had no idea a job that massive was on deck 😆 That looked like a proving ground for the Ventrac and the tough cut, but they said "hold my beer"..awesome. What did your software say was the acreage on that?

[@TheLawnCareLifeinMowssouri]

Haha yeah, the Ventrac had to make a point on this one. Far too many have said that the Ventrac Tough Cut couldn't handle a job this big. But I think it did pretty well. Thanks for the continued support. I think the property is around 15 acres that I tackle. All I know is that I had one tall glass of SWEET TEA when I finished up lol. 😎

[@michaelbychkov8030]

is there any performance difference between the red ones and when they recolored them to white and red? or between the mowing attachments? also good job on the field, it did a surspiringly clean cut, almost no stragglers. Even looked like it was striping in some of the cam angles.

[@TheLawnCareLifeinMowssouri]

Hey Michael! It’s the same Ventrac. I just covered the off white color on the tractor with black. There are different Mowing Attachments based on your job that you’re tackling. I think the flail mower deck probably would have left the best cut on this one. Simply because it’s made for chopping up all of the material. The tough cut deck did stripe pretty well! Appreciate you taking the time to watch. 👍

[@tommytom2065]

27:48

[@hugostiglitz8465]

Nice job, I would carry some tools,belts etc in the truck in case of breakdown.

[@TheLawnCareLifeinMowssouri]

Always a good idea to keep plenty of tools and belts on the truck! Something is always going to happen on these overgrown jobs. Appreciate you watching.

[@grahamgray9223]

You aced the Cam, looking sweet, what was the steepest reading on the slope gauge?

[@TheLawnCareLifeinMowssouri]

Thank you! I appreciate it. The steepest point was around 32 degrees. Most of it was between 18-22 degrees. Just steep enough to keep you from running a traditional tractor/bush hog on it. But some of it, you couldn't even get a traditional setup on. The Ventrac makes it look so easy. It didn't even sweat it. 😎

[@grahamgray9223]

Cheers@@TheLawnCareLifeinMowssouri

[@TheLawnCareLifeinMowssouri]

😎

[@LWAYNEB-e2b]

how does the life of the belt purchased at an auto store compare with the oem belt from ventrac? are they the same in quality or is the ventrac belt better?

[@TheLawnCareLifeinMowssouri]

I’m not sure on the belts. We have a belt manufacturer here that produces some quality belts. But Ventrac claims their belts are very high quality.

[@hisparadox1]

the tough cut is a great deck, with the flat blades, it really manages to accomplish allot with limited horsepower. 3 questions,. how big is the field, and how much mower time did it take to clear it, and does a job like that require additional non mower time?

[@TheLawnCareLifeinMowssouri]

Yeah, you are right! The Tough Cut blades are TOUGH! Only 31HP and it eats right through it. The field was around 15 acres and took a good week to clear including the power line in the previous video. You have to blow out the engine compartment quite a bit when mowing this type of grass. Everything collects around the engine, so every 30 mins or so you're stopping to blow debris off.

[@michaelsears4164]

Good deal !

[@TheLawnCareLifeinMowssouri]

👍

[@MARKLOCKWOOD2012]

ventrac is made for these kinds of places you don’t take a commercial mower from videos it’s called a tough cut. if this unit can’t handle this well Ventrac has issues to work out

[@TheLawnCareLifeinMowssouri]

The Ventrac was born for this. I'm glad someone understands that! Thank you for checking out the vid.

[@deathlands10]

Did I see one time a tool attachment for the back where you can mount rake, shovel, weed whacker etc?

[@TheLawnCareLifeinMowssouri]

Yeah, that sounds like an aftermarket tool attachment. I’ve seen something similar. Definitely would be nice to have on a job like this!

[@smunro851]

Very nice job Cameron. How long did it take to mow all of that land?

[@TheLawnCareLifeinMowssouri]

Thank you! I logged a LOT of hours tackling that one. Can't remember how many to be exact, but it kept me busy for several days.

[@jefferyschirm4103]

Everything but the music , please remember one man’s music is another man’s racket !!!

[@TheLawnCareLifeinMowssouri]

haha I definitely get it! Unfortunately most of that had to be shot in time lapse because it took SOOOOOO LONG to mow. And no audio is captured while in time lapse. Would you guys rather hear a voice over of what I'm doing instead of the music? I started to do a voice over, but didn't know if you guys would like that? Let me know what you think. And thanks for the feedback.

[@LWAYNEB-e2b]

what is your standard cutting height on the job , is it different with other job or do you run the same cutting height on all jobs? also do you double cut this job or all your jobs? or just run over the field once?

[@TheLawnCareLifeinMowssouri]

I run it pretty low to give it a better cut. I’ve taken the front caster tires off the tough cut deck and it is giving it a much better cut.

[@LWAYNEB-e2b]

@@TheLawnCareLifeinMowssouri with the casters off how does that help you with the better cut... thanks for your other replies. i am excited to see the ventrac in action with out the casters!!

[@TheLawnCareLifeinMowssouri]

@LWAYNEB-e2b the front casters tend to run over and lay the grass down. The grass doesn’t pop back up for the blades to cut. So a lot of skippers and missed grass. Without the casters, there’s nothing to push the grass down so it has to be cut by the blades. Leaving a clean nice cut.

[@trevorburton2718]

If you had a bucket attachment for the rear of the mower you could keep all your tools and spares in the bucket. Can your mower have a bucket on the back mate?

[@TheLawnCareLifeinMowssouri]

Hey Trevor! Thanks for taking time to watch. I do have a bucket, but I don't have the 3 point hitch to go on the back of the Ventrac. It would definitely be handy to have one hooked up to the back. Maybe something I can swing in the future! That's a good tip!

[@trevorburton2718]

@@TheLawnCareLifeinMowssouri `Your machine did a great job all the belt drives are probably the weakest link of the machine. I have the older model. But I rarely break a tractor belt just the mower one.

[@Jack61]

Love that Ventrac. I'm curious, how many acres was that in all?

[@TheLawnCareLifeinMowssouri]

I love the Ventrac as well! Unbelievable machine. I think it was around 15 acres that was knocked down.

[@debrathompson7657]

How big was this property and how long did it take you? This is amazing!

[@TheLawnCareLifeinMowssouri]

Around 15 acres to tackle on this one. Took about a week to clean it all up including the power line. Be sure to check that video out when you get a chance!

[@railroadenthusiast6246]

The ventrac was well known for belt problems. We used one on our golf course and not even a month we snapped the belt. Honestly I think they should be gear driven by the PTO instead of belt driven. But awesome job tackling that.

[@TheLawnCareLifeinMowssouri]

I like the fact that the belt is the breaking point instead of something more expensive like a PTO shaft. Pretty quick swap and you’re back up and running. What attachment were you using on the golf course?!

[@chrisd.9745]

A commercial zero turn probably could have mowed that buddy.

[@TheLawnCareLifeinMowssouri]

Lol you can’t put a zero turn on this one. It would be high centered first pass. That’s if the spindles didn’t break on these rocks sticking up. Hard to gauge from the video of course. But it’s rough terrain. Appreciate you watching!

[@billyhaddock5540]

good job cutting the big field. noticed that u need to sharping the blades. some stuff didn't cut good..

[@TheLawnCareLifeinMowssouri]

Thank you. Yeah, this deck is designed to cut more of the thick brush than grass. Sometimes it doesn't cut the grass as clean as I would like. Would like to have the flail deck for the tall thick grass. It leaves a better cut.

[@aaronburford5701]

Wow! Great video.. yes indeed rough terrain to tackle. No issues for the Ventrac. How long did this take to complete? How much would this cost to get done? Is this someone's property or public owned?

[@TheLawnCareLifeinMowssouri]

Thanks for watching! The Ventrac cruised right on through. This was a huge job. It took the Ventrac all week basically. So, we had to price accordingly.

[@kevintrimm3998]

How do you price your jobs, by the hour or guesstimate on how long it’s going to take you?

[@TheLawnCareLifeinMowssouri]

Good question. I guesstimate on how long it will take. Each job you learn from. Some jobs there’s just no real way to tell how long it’s going to take. In that case, I will bid for a full days worth of work or two.

[@grassgonewildlandscaping5445]

What did you end up charging for that job seems like a good amount of work and I would love to purchase a ventrac some day

[@TheLawnCareLifeinMowssouri]

always not near enough lol. I was out there a while. What would you do with a Ventrac? Tackle overgrown areas with the Tough Cut? Or something different?

[@andrewhoggett8148]

id love own some land and a ventrac one day awesome mower

[@TheLawnCareLifeinMowssouri]

That would be awesome! Kick back, relax, and let the Ventrac do all the work! It's a fun machine to run. Appreciate you tuning in.

[@hitmc6327]

How often do you go through belts on the tractor and/or mow deck? I would think the ones on the deck would stretch or burn up and need replacing at last a couple times a year? I’ve seen that on finish decks multiple times.

[@TheLawnCareLifeinMowssouri]

Haven't went through as many belts as I would have thought. But they do break down quicker, the more you push them. I think a couple of belts per year would be normal running it under normal circumstances. Appreciate you watching!

[@hitmc6327]

@@TheLawnCareLifeinMowssouri Thanks for your reply. Hope you have a great summer season.

[@michaelzorro2738]

How many hours did it take you to finish the site? Did you pre walk the site? looking for trash rocks boulders, metals etc. Thank you for sharing

[@TheLawnCareLifeinMowssouri]

It took a solid week I would say. Between tackling the powerline and tackling the hillsides. I didn’t walk the property beforehand. That’s why I have the Tough Cut. So it can find those things for me lol. Property is too big to walk. But I did keep an eye out the whole time. Found the usual pillow up by the road. Found a lot of huge rocks that got my attention real fast. 👀. And I found an old push mower over by the woods line. The washed out areas were the worst. You couldn’t see them until you knocked the grass down. 😳. I could have flipped the Ventrac in several, but fortunately I saw them just in time. Thanks for watching!

[@404nitro]

I enjoyed it very much (except for the squeaky YT music). I think a 21" Honda SP mower might have been a better choice though LOL The VT was a great tool for that job brother. Maybe you can talk them into having you fill that serious washout with riprap rock or something?

[@TheLawnCareLifeinMowssouri]

Glad you enjoyed it! Unfortunately, on the time lapse videos there's no audio so you gotta add in a little music or you may fall 😴 lol. It would be nice to fill in all of the washed out areas, but you could seriously spend about a week fixing all of those spots. Lots and lots of washed out places. I should have videoed more of them. Some are unbelievable. I like the way you think though! Fill em all in!

[@404nitro]

@@TheLawnCareLifeinMowssouri As for the music, I'd rather have the engine sound dubbed in, even while the video is in fast forward LOL I was just thinking that eventually, that place is going to have a huge washout (or as you said, several) to deal with and repair. Riprap would prevent it from getting a lot worse and give the water somewhere to keep running in the same place. Might not be what you normally do but might be worth your time to find pout. Just a thought. Having the bucket for the VT would make it fairly straight forward.

[@larryperdue508]

Another great job but still waiting on that flail mower by the way its hydraulic driven not belt driven 👍👍

[@TheLawnCareLifeinMowssouri]

Yeah, I would like to try out the flail mower! Maybe someday. I can't get a demo unit.

[@troybutler2717]

The Ventrac with the tuff cut was absolutely the right tool for the job. A belt break? Ehh, it happens.

[@TheLawnCareLifeinMowssouri]

Ohhhhh yeah. Nothing that the Ventrac can't handle. Swap out the belt and keep on mowing! Appreciate you watching.

[@Chad.Farmer]

Hi Cameron what psi do you run your tires on ventrac?we have a Steiner 450 .there is a lot more content on the ventrac online .

[@TheLawnCareLifeinMowssouri]

I run 10 psi on the inside and 8 psi on the outside. How about you?

[@Chad.Farmer]

@@TheLawnCareLifeinMowssouri all 8 psi us .10 in middle would work great I’m sure to us too.we like your videos very much .

[@mikemarconi8265]

Was it the main power take off belt? How fast did you change that…I felt like I had to take the front grille off

[@TheLawnCareLifeinMowssouri]

Yeah, it sure was. I was able to change it pretty quickly. The first time it happened, it took a while to figure out. But this time around, it was pretty easy. Thanks for watching!

[@jt608]

Hello....If possible, can you tell us how you price a job like this? Thank you...j

[@TheLawnCareLifeinMowssouri]

Get a good idea of how long it will take to complete the job and have an hourly rate that you need to make when running specific equipment. Then run the numbers and see where your profit margins fall.

[@lloydedwards8038]

And being from the SHOW ME State they are naturally going to tell you that seeing is believing!

[@TheLawnCareLifeinMowssouri]

That’s right! Let’s show em how it’s done! #showMeState

[@kimberleytui179]

VENTRAC 💚 Horror Hill n mini Grand Canyon!

[@TheLawnCareLifeinMowssouri]

haha...felt like it

[@iansmartel5473]

After the vegetation dried did you burn 🔥 it in a controlled fire 🔥?

[@TheLawnCareLifeinMowssouri]

Nope. The customer just wanted it cut down. That would have been a lot to burn. Erosion would be a big issue if you burnt it as well. Need to keep a nice rooted vegetation on those hills to keep from washing it all away. Thanks for taking the time to watch!

[@westitzer]

How many acres was that? Awesome job, Dude!

[@TheLawnCareLifeinMowssouri]

Thanks a lot! It was probably around 15 acres or so. Definitely a LOT to tackle for the Ventrac Tough Cut. But I think it turned out great. 💯

[@Terrasolutionsms]

How long did it take from start to finish?

[@LWAYNEB-e2b]

how does the power of the z ventrac tractor with the kubota engine compare to the power of your tractor with the vanguard engine.

[@TheLawnCareLifeinMowssouri]

Similar in power, but the Kubota liquid cooled engine is going to hold up much better long term than the air cooled Vanguard engine.

[@JP-ou8yb]

I am curious what you would charge for doing such a job, major difference.

[@TheLawnCareLifeinMowssouri]

It's never enough lol! It was a big job to tackle for sure, but I like the end result. Thanks for watching!

[@iagrams9100]

Was wondering if you were on a fault line to create that gully. 😂

[@TheLawnCareLifeinMowssouri]

haha it's very possible! I did hear a little rumble before I got started 😂

[@Johnny-bl7jg]

Right Tool for the job. Could made a better choice.

[@TheLawnCareLifeinMowssouri]

I would like to try the flail mower deck sometime. I bet it would leave it looking nice! 😎

[@LAWNFORCELLC]

That was a massive property

[@TheLawnCareLifeinMowssouri]

Ohhhh yeah! Thanks for watching, Abel! 👍

[@billyhudson2533]

You need to have another belt on that truck on Standby for the next time it breaks. Roll with the punches a Cameron?

[@TheLawnCareLifeinMowssouri]

Oh yeah for sure. I swap trucks and trailers too much lol. Can’t remember it all.

[@Doofus171]

I see you wore a respirator, can I ask why? (I'm curious about the reasoning for it)

[@TheLawnCareLifeinMowssouri]

I’ve developed some pretty bad allergies by tackling these overgrown properties. Now, I have to wear this in order to complete the jobs.

[@Doofus171]

@@TheLawnCareLifeinMowssouri I thought maybe you wore it because in case you mowed something like poison ivy, poison hemlock or wild parsnips (and if it aeroslized the oils and compounds). I've heard some pretty bad horror stories and fatal outcomes of those things happening, and its made me question whether wearing a respirator and goggles should be a practice I do as standard practice.

[@michaelsears4164]

Have you got your Ventrack back yet or still using the loaner?

[@TheLawnCareLifeinMowssouri]

Got the Ventrac back! They ended up putting a new engine in it. 🙏

[@richardsmith6106]

Just wondering what you charge for the mowing on this property....I have 10 acres..let me know

[@TheLawnCareLifeinMowssouri]

Every job is different. No two are the same. Lots of different variables to consider when tackling these overgrown properties with the Ventrac. And every time you think it's going to take x amount of hours, it always takes longer lol. Thanks for watching.

[@kenshaum3994]

I would like to see more in real time

[@TheLawnCareLifeinMowssouri]

Ok. It may put you to sleep though. It’s a SLOW go. Either way, thanks for watching!

[@elsalearing5566]

"Hard working man"

[@TheLawnCareLifeinMowssouri]

💯

[@avenger007007]

nice view of a fault line

[@TheLawnCareLifeinMowssouri]

I know, right?! There were a LOT of spots like that. Deep and wide. Definitely had to be cautious running the machine on that one. Thanks for watching!

[@rwamchubb7977]

So the mower deck is belt driven. Not PTO off the engine, that's odd.

[@TheLawnCareLifeinMowssouri]

All belt driven to reduce down time and break downs. Easier to swap out a belt if you hit something solid out there. So far, so good. It’s been solid

[@solitacanaya9121]

Super3x duper3x excellent.

[@TheLawnCareLifeinMowssouri]

Thanks a lot! I appreciate it.

[@Biglew-k3m]

This is an odd question but could you tell me the name of the song you play in your video

[@TheLawnCareLifeinMowssouri]

I’m really not sure. It came from the KZbin playlist though. You like it?

[@crc1763]

bout long did it take to mow all of that in real time.

[@TheLawnCareLifeinMowssouri]

A good week I would say. Including the power line in the previous videos. But 35 mins would have been a little nicer 😎. Thanks for watching! 👍

[@jeffskow6443]

How much do you charge to mow a field that size ?

[@TheLawnCareLifeinMowssouri]

Not near enough for the amount of hours that I put in. But I can't complain. I really enjoy taking care of the property and cleaning it up for them. Appreciate you watching!

[@melindaapril3880]

No I’ve seen a ventral at work and it’s a monster 👿 but I’m sure you don’t want to be there all damn day and a tractor and bush hog would go faster. Not sure what you’re trying to prove other than it can do it just takes longer. Beautiful job

[@TheLawnCareLifeinMowssouri]

Thanks for taking time to watch! That was a fun one. 🤠

[@shawncornish2770]

e How long did this job take you to complete, and how long did you think it was going to take you?

[@TheLawnCareLifeinMowssouri]

Oh man, it took a while! Probably a week the first time I tackled it. Just slow go with the terrain. The first time it took even longer. It gets easier each time I tackle it.

[@shawncornish2770]

@@TheLawnCareLifeinMowssouri you make some sweet videos, keep up the great work.

[@TheLawnCareLifeinMowssouri]

@shawncornish2770 thanks a lot! Appreciate you taking time to watch the videos. 👍

[@tucksmith8300]

That was a big property to mow

[@TheLawnCareLifeinMowssouri]

Ohhhhhh yeah

[@tucksmith8300]

@@TheLawnCareLifeinMowssouri that Ventrac did it’s job though even though it broke a belt

[@RDSWOODWORKING]

How many acres did you cut

[@TheLawnCareLifeinMowssouri]

It was around 15 acres total that we tackled. Thanks for watching.

[@randyhughes5160]

That ventrack is what about 30,0000.00 then you say they suggest a bigger tractor what a 80,000.00 tractor and most of them use a push mower or a 3,000.00 ridding lawnmower it sure is easy to sling words nice video

[@TheLawnCareLifeinMowssouri]

Yeah, the Ventrac is around $30K tractor. And when you bring out a full size tractor, you are WAY up there in price. Not to mention the bigger truck/trailer to haul it. Even then, there are areas on this job that I would NOT put a traditional tractor on. Simply because it's unsafe. Too steep. Too washed out. Perfect scenario for a rollover if you're not careful. Thanks for tuning in and watching! 👍😎💯

[@freespeach1776]

You get stung much… nice video

[@TheLawnCareLifeinMowssouri]

Thankfully I did NOT get stung! But, it's very possible when tackling these jobs. Thanks for watching!

[@sandypratt8951]

💚👍👍👍

[@TheLawnCareLifeinMowssouri]

Thank you for the continued support! 💯👍😎

[@kennethmccubbin608]

Would be nice to have a portion shown at actual speed. Thanks

[@TheLawnCareLifeinMowssouri]

I think it works definitely put you to sleep, but appreciate the feedback for the next video. 👍

[@johndeere8594]

The only advantage I could see to using a full size tractor would be a bigger cutting deck so you could get done faster and use less fuel.

[@TheLawnCareLifeinMowssouri]

Bigger cutting deck would have been REALLY nice! Appreciate you watching.

[@jamesberg3106]

Wow what a dry creek. Could swallow most anything!

[@TheLawnCareLifeinMowssouri]

Yeah, it's deep in there for sure!

[@davidgalloway-fd6sb]

Hey, how can i get one.

[@TheLawnCareLifeinMowssouri]

Head to Ventrac.com and find a dealer near you.

[@colleenkarayiannis8814]

You did a good job, however why did it need to be cut, I understand 10metres around the house,

[@TheLawnCareLifeinMowssouri]

Thank you! I'm not sure what they plan on doing with the property, but the customer requested to have this area mowed. Appreciate you watching.