THIS £25 PART SORTED THE PROBLEM ON MY FN2 TYPE R!

[@SpiritBlueFezST]

Did this on mine (plus clutch fluid change as it was black sludge), and solved the 1st gear VTEC into 2nd gear notchiness I had, plus the clutch peddle rose up a little too.

[@mattyhauxwell]

Good video my guy, also did you know there is an adjuster in the footwell above the clutch pedal you can adjust your pedal if you want it abit higher or lower. Not sure if you are aware of this but I would try it. I did mine I raised it up as previous owner lowered it to far.

[@emetv5083]

Thanks bro! & I didn’t even know about that feature. I’ll take a look at mine tomorrow & give it a try. Thanks man! 👊🏾

[@mattyhauxwell]

@@emetv5083 no worry at all think it's just a 13mm just get a spanner unclip the sensor adjust the peddle nip the bolt up and put the sensor back on👍🏽 2 minute job

[@lexzenis2544]

yes i did it, clutch pedal was limp before... feel is now direct and springy. great mod. Helps the cabin shudder because of the engine mount polybushes a little better too.

[@emetv5083]

It really is a great cheap mod. Would always recommend! Continue enjoying 👌🏾

[@leexr2i]

This is a great vid! See so many people doing the diaper delete but no one have ever really managed to fully explain it. Now that I think even my fn2 will miss a gear every now and then when changing at high rpm.. might look at this

[@emetv5083]

Cheers man! It could help you out, hope it does! 👌🏾

[@mickgee130]

Yeah clutch bite point adjustment is a good shout as some fn2s have a low bit from factory so much so mine was hard at redline getting a good change , now it's perfect for half hours work

[@emetv5083]

Yeah, a very worthwhile mod that should be done on most FN2’s, helped mine a lot! 👌🏾

[@ryancrowther6171]

Nice to see a fellow manc in an fn2, I’m doing this mod myself very soon

[@emetv5083]

Let me know how you find it! 👌🏾

[@adamsaunders7161]

Did the same mod to my FN2 just before Christmas. Totally agree with your review 👍

[@emetv5083]

Great stuff, hope you’re still enjoying it! 🙌🏾

[@Sidewayz_Gaming]

Great video. My FN2 feels the same, I’ll be doing this mod first before changing the clutch! 👍

[@emetv5083]

Cheers! Hope it helps you too! 👌🏾

[@andysmith8031]

I have seen that people keep doing this. Has anyone got a before and after on just changing the clutch fluid instead?

[@marcothorsen950]

Nice advice fella.. 👍😁 Thanks. Canada cap , where you purchase. ? 👍

[@emetv5083]

Cheers man! I bought from RHD Performance: Link:www.rhdperformance.co.uk/hel-stainless-braided-clutch-hose-damper-bypass-for-honda-civic-type-r-fn2-76498-p.asp

[@marcothorsen950]

@@emetv5083 No Canada cap there m8 ??

[@Vtecdragon]

hey man I'm close by 84 autos, would you recommend them? I need some work on my fn2 and these guys seem the perfect fit for the jobs!

[@emetv5083]

Yeah mate, they’re good guys & all the bodywork I’ve given them so far has been lovely. They’re doing only bodywork from now on though, unfortunately they’ve stopped mechanical work. Hope that helps 👌🏾

[@HondaK20]

Hi! If you instal the bypass line. Must be demontage damper and the plastic hose line? I think I do mistake. I buy bypass line and HEL line in same time. Thats right?

[@HondaK20]

I want say. Is impossible buy HEL hose line in same time with HEL bypass line. If instal bypass line,this second hose go out with damper too.