This case is an absolute TANK. Nothing comes close.

Рет қаралды 50,695

Күн бұрын

Пікірлер: 116

@richardfarmer6570 Ай бұрын

Didn't know you were in Tampa, hope you made it through ok. I lived in Florida for 15 years so I remember what a joy hurricanes can be.

@devyn.johnston Ай бұрын

Thanks! yea luckily we made it through okay. unfortunately, a few of my family members had some significant damage to their home.

@cinnamondum Ай бұрын

Yeah, really praying for all those people in florida right now.

@kensg Ай бұрын

@@devyn.johnston Sorry to hear that bruh..all the best for the future 🙏🏿

@Nizon Ай бұрын

If I wasn’t sold on the Terra, I would definitely grab this case for my new upcoming build. Loved how the yellow LEDs looked.

@TheHipClip Ай бұрын

Just get an Ncase M2 or the V2 Dan C4 whenever that'll release. I wanted to get the Mjolnir when that was just out and the treatment I got from Customer Support was awful and downright illegal in the EU (withholding the deposit after the case didn't ship).

@giuseppepizzichemi5194 3 күн бұрын

Thanks for writing this. I was about to make the same mistake. Companies that behave like this should be avoided.

@mauricedave74 Ай бұрын

That intro song is just.. chef's kiss! Love your content by the way. You're the reason why I build my Velka 3 rev 3.

@FullmetalBR Ай бұрын

You that this song is a Sample from a Linkin Park music right?

@Zero-oq1jk Ай бұрын

Such an important piece of art should not be used for such a 'case'. Although it is just a slice and I guess it was not bad intended and all.

@benjidowning2609 Ай бұрын

@@FullmetalBRit’s just an instrumental of Waiting for the End by Linkin Park

@gamist8166 Ай бұрын

$400 for a PC case? Its beautiful, but this is Nvidia GPU pricing at this point...

@Neeb1337 Ай бұрын

Awww man, just north of you (Gainesville), so glad you guys are ok! I have this case, empty atm, waiting on somethings, it has been a difficult build (not Thorzones fault), but looking forward to finally finishing it!! Currently using the Arous B650 Ultra, but have been looking at the Asus x670 or x870 ITX board. Anyway, great video, stay safe!!

@fjorddenierbear4832 Ай бұрын

Potentially the ultimate PC to bring on an airplane, whether checked in or carry-on. That said, my Cooler Master Ncore 100 Max is holding up fine. Just wrap it in a ton of clothes, stick in a suitcase, and you're good to go. Major weakness is only 120 mm AIO tho, but it's good enough for stock wattage for my 13700K. I'd definitely prefer at least 240mm tho.

@emiel255 Ай бұрын

In my opinion the NanoQ R is the most promising ITX case so far since it can handle the biggest current GPU’s and a 240/280mm AIO at the same time. Only the price is still an understandable controversial talking point

@LuisRiveraRomero Ай бұрын

I have in mine a huge ASUS TUF Gaming GeForce RTX 4080 SUPER (dimensions 348.2mm x 150mm x 72.6 mm) and a Thermaltake 280mm AIO and everything fits like a glove. The price is due to the extruded aluminum case, is heavy/solid and beautiful.

@vento5314 Ай бұрын

Whenever people say "I choose the proart GPU for this build" bro everyone with that case uses it it was legit made with that in mind.

@LuisRiveraRomero Ай бұрын

have in mine a huge ASUS TUF Gaming GeForce RTX 4080 SUPER (dimensions 348.2mm x 150mm x 72.6 mm) and a Thermaltake 280mm AIO and everything fits like a glove. I wanted the ProArt, but the TUF also fits and have better thermals.

@vento5314 Ай бұрын

@@LuisRiveraRomero I ment here on youtube every video with this case has that GPU and they act like "I choose the Proart".

@RedworxAU Ай бұрын

@@vento5314 asus promotion for thier new range

@bosco9028 Ай бұрын

For such a premium case they really needed to have sorted the case scrapping with a better mechanism. Using tape to stop the case scrapping is just not acceptable at this price point. Neither is the janky method they used for the dust filters which just get all torn up evert time you pull the main body from the case. What is with the lack of appropriate length hex screws for fans also? All these things should have been sorted in testing before they started shipping orders. Let's see if they truly fix all these things for the second batch of cases. My guess I bet they don't.

@KanoTransformations Ай бұрын

Devyn love all your builds. Your video production is top notch as well.

@MrOffroadpia Ай бұрын

Devyn, great video! Can you please post some details about custom cables you are using for this build?

@BALJIT147 Ай бұрын

I like this case a lot. My only issue with it is that you're limited to smaller coolers if you want to go air cooled. If they make a case where I can use a NH-D15 I will throw my credit card at the monitor so fast...

@ericnguyen0419 Ай бұрын

nh d-15 in an itx case?

@BALJIT147 Ай бұрын

@@ericnguyen0419 Yes.

@emiel255 Ай бұрын

In an ITX case that would be quite hard to find. I would just go with an AIO if I were you a 240/280 should be more than enough for the current best CPU’s (aka AMD) for both production and gaming :)

@emiel255 Ай бұрын

That would be quite hard to find in a ITX case. If I were you I would just go with a 240/280 AIO since that can easily cool the best CPU out right now (AMD) even for both gaming and production

@BALJIT147 Ай бұрын

@@emiel255 I've got a Corsair 2000D and the NH D15 so I'm set. I do really like the nanoq though.

@00sra Ай бұрын

Hey Devyn, when can we expect to see a video on the Ncase M2?

@user-uz1jo2uf3n Ай бұрын

Hi. Do you think the new intel 285k work properly in this case?

@kdk3389 16 күн бұрын

Hi. Are those cables from Bespoke Baka through in my Nanoq order page?

@DEM0NJEDI Ай бұрын

I have yet to see anyone test with the aio they offer as an option. I’d like to see the thermals with that

@mjakgaming6214 Ай бұрын

I have the case with the 280 they offer and I'm running a delid 14900ks no issues. It'll hit low 70s during a more cpu heavy game and sits in the 90's during cpu benchmarks. GPU temps are never an issue either.. running a TUF 4090. My setup is vertical using 280mm rad as intake and then a 140m fan as top exhaust.

@TomLee-lv8ql Ай бұрын

400 euros plus import tax .. 😂😂😂

@xyylass123 Ай бұрын

Had no idea you live in Tampa! Same here, i was actually wondering where you buy computer parts from or is it strictly online, I’ve found that there is absolutely zero computer stores around here besides the typical Best Buy

@SigfridSWE 5 күн бұрын

Would all of this fit in the S? Im looking at exakt those parts. It says on the website that the ASUS GeForce RTX 4080 Super 16GB ProArt fits in the S

@wynnk. Ай бұрын

Try JONSBO TK-0, its sleek for itx cases

@iandolmseth 20 күн бұрын

Will all these parts fit in the nanuq s? Also can I use a AMD Ryzen™ 9 7950X3D with the mother board that is listed awesome video and thank you in advance

@ab185 Ай бұрын

Can you do a build with a 4080 or 4090FE with the pass-through cooler so we can see thermals with the pass-through being so close to the PSU? Super excited to get mine (exact same spec as yours) to de-throne my T1, but am slightly worried about GPU temps.

@zahinpasha8746 Ай бұрын

Honestly,after seeing the xikii FF04, everything is meaningless

@init_yeah Ай бұрын

Fax

@HonestHans365 Ай бұрын

It puts the gpu on display which I like. Looking forward to seeing similar cases with wider gpu compatability.

@zakyziko44 Ай бұрын

Too expensive

@ssgtblackmamba7991 Ай бұрын

The case that gives you the option of only 1 very specific gpu? Nah, I'm good with some freedome thank you very much. Looks great for now, until I want to upgrade in 2 years. I've got money to spend, not money to waste😂

@HonestHans365 Ай бұрын

@@ssgtblackmamba7991 This is why I didn't choose a small case. As tempting as they are, the restrictions are too stringent if you want to upgrade any part or just tinker.

@domcox Ай бұрын

Such a beautiful build! How much does it weigh? I’m looking for a case I can travel with and weight is a limiting factor when flying

@Proceede89 Ай бұрын

What's that on screen display monitor for temps/fps called?

@Jimmy_Winberg Ай бұрын

What are the lenght of the cables you custom ordered and from where?

@elbrothar9072 26 күн бұрын

Could u share the lenght of the custom psu cables pls? already preordered want some cables to fit properly

@JethroKabigting Ай бұрын

Hey Devyn, waiting for your Era 2 Review, is it coming out soon?

@kensg Ай бұрын

Nice honest review.. thanks Devyn 👊🏿

@projectdonate7656 Ай бұрын

W video! THAT CASE IS LIT!

@stahlreich Ай бұрын

Need same, but little big for most popular and cheap mATX motherboards!

@PlayboiCarti-ny9nz 22 күн бұрын

Building my first pc soon, gonna go all out but a fish tank pc also looks really good 😂

@mikemariano4012 Ай бұрын

No apologies necessary. Thanks for the vid!

@omletgod2488 Ай бұрын

man i really really REALLY would love to have this case. but that price is just unjustifiable. like 200$, even 300$ at tops. but $400?? nahhh man

@chonkiboii Ай бұрын

750 PSU enough for 7800 and 4080 super?

@AstroBot-bc0213 Ай бұрын

Really want to see what you think of the mcpure cases especially the Apollo s 3.0

@user-di4hr2ed3w Ай бұрын

Is 4090 possible?

@MB-nope Ай бұрын

Didn't expect to hear Linkin Park on a PC case video but I do appreciate it 😌

@sircutious-bb1dz Ай бұрын

The tape inside is like: a sticker on a merc.

@REPO1893 Ай бұрын

you built beautiful pc's , which I can get my self one of these

@shawn8226 Ай бұрын

Love your videos.

@avima4837 Ай бұрын

Is this build on the NANOQ R or S ?

@THORZONE Ай бұрын

R :)

@MichaelTendayiChikamhi Ай бұрын

hope you are doing alright man 🙏🏾

@93ksj Ай бұрын

Mom can I borrow your cheese grater?

@matthewrezuke8130 Ай бұрын

You gotta get a ncase m2!

@rayyanyassin4440 Ай бұрын

can you put a 240mm aio in this case ?

@alihammad6318 Ай бұрын

Up to a 280mm, yup.

@KosmatyWilczek Ай бұрын

Price is also as for the TANK Cool regardless

@subhasray1111 Ай бұрын

thanks again

@JeffHardware Ай бұрын

Waiting for the end intro, incredible 😍🔥 I'm a huge fan of this case and bought the R Carbon, which is a real work of art.

@thenozar7603 Ай бұрын

So in summary this case is firstly casted, then machined. Makes plenty of sense to me

@estebanismael4749 Ай бұрын

This and the Ncase M2 are pick

@TheTastefulThickness Ай бұрын

At max CPU cooler height do you get 2 slots of GPU clearance?

@SubiKinubi Ай бұрын

This is 319 pounds, that’s around 670 AUD…without accessories 😂

@runadumb Ай бұрын

Yeah but......I kind of love it. I preordered a Ghost R1 and I'd rather have put in a bit more money for this

@SubiKinubi Ай бұрын

@@runadumb and hence the problem

@ОдниИзНас Ай бұрын

Nice! New video❤

@AniketSingh-hr8mi Ай бұрын

now way did i just hear Linkin Park for intro music !!! humanity still has hope

@Metal_Health_Worker Ай бұрын

400 Euro? for a case??

@TheIndulgers Ай бұрын

At this point, I don't know why anyone into SFF wouldn't go with the FormD T1. Super high build quality, reasonable price for a premium SFF, best compatibility in class, sub 10L, good airflow, clean design, no turbulence issues *cough terra cough*, etc.

@Sheltur_0311 Ай бұрын

because the reference model is never in god damn stock

@alihammad6318 Ай бұрын

I wanna do a custom direct die loop, if I can manage an external pump/res, I'll get the T1, otherwise I may have to go SSupd Meshilicous.

@emiel255 Ай бұрын

Well speaking for myself I really like SFF but I dislike the lack of 3rd party GPU choices SFF often give. I personally like an SFF case if I know it can fit the biggest GPU (ROG STRIX 4080/4090 for example) and at least a 240mm AIO (so both at the same time). The FormD T1 can not do that unfortunately even though the case is absolutely beautiful. The case in the video can do it and that is why I think it is a good choice for people who want to go small case wise but big on the inside. The price is extremely tough though The reason the GPU space is important to me is because I want to have the option to go bigger if I want to and to have room for the next generation if I need it without having to change the whole case. I don’t have a STRIX or a 4090 but I want to have that space just in case I like to upgrade Because of this after hours and hours of reasrch I ended up with a 17L open frame and I couldn’t be more happy. I am not gonna upgrade those case anytime soon But to each their own of course it all just depends on what you want with your PC