This DAW is FREE | Tracktion Waveform 13 Free Tutorial for Beginners

[@broccolionswag]

i said it, you know i said it 🗣🗣

[@Tumberstruck]

His taskbar 💀💀💀

[@Maspry]

Recently downloaded and this is what I needed thank you!

[@WaveformExplored]

Awesome! You’re welcome! Let me know if you have questions

[@raphaeldukhan]

Finally a Channel dedicated to Waveform. Kudos to you my friend. and BTW, I'm already subscribed to your channel. Can't wait for additional tutorials!! Keep up the good work

[@WaveformExplored]

@@raphaeldukhan Right on! Slowly rolling out more. Let me know if you have any specific videos you would like. All the best!

[@DaveL60]

I was happy to find this channel and will be watching. Another good source is Audio Tech TV's Waveform tutorials (kzbin.info/aero/PL1YDn3d3UkT5m3xa7Diks8Veq3zplVxdR)

[@broccolionswag]

thank you for the tutorial!!

[@WaveformExplored]

@@broccolionswag you’re welcome. I hope it was helpful

[@Donaldreagan-m9r]

The next update please separate track Reverb one by one.Thanks.

[@WaveformExplored]

Do you need a separate video explaining how to use reverb in Waveform?

[@ra.in.deer.]

@@WaveformExploredact could u make a vid like that. i really wanna make music that has a lot of reverb like sza’s “z” ep

[@WaveformExplored]

@@ra.in.deer. sure I plan to work on a video covering reverb in more depth this week. Stay tuned.

[@rusty6813]

Great tutorial - keep it up! This *almost* looks as cool as my Ableton DAW. Maybe better O.o. One thing I do not see is 1) How large the program's File size is after install, and more importantly 2) Does it default to your C: drive when installing? That would be bad... Again, Thanks for the tutorial, and great job on it!

[@WaveformExplored]

Hmm the size of the DAW isn’t much. Of course the more plugins you add that’s where the large size comes into play. All installations will start off at C drive but you can change it to whatever drive you want.

[@dyxonelgeniomusical5864]

Can record multitrack?.

[@WaveformExplored]

Yes it can

[@AiuPal]

Is there maybe a Time Stretch function for WAV One Shots Instruments?

[@WaveformExplored]

Hmm. I have to check into that. Do you mean time stretching a wave file to change the tempo. One shots normally don’t need to be stretched but loops do.

[@AiuPal]

@@WaveformExplored For example a Piano or Flute One Shot as a WAV File. There higher notes in the Keybed are faster.. when you go on the lower notes on the right side of the Keybed the Sample or One Shot goes slower. In FL Studio it called Time Stretch. To make a Sample always the same lenght. I dont find the function on Wafeform, maybe you can help me out.

[@WaveformExplored]

I made this video today. It will release 6am CST Friday. Hopefully it helps Are Your Samples Speeding Up? Here's The EASY Fix! kzbin.info/www/bejne/iYWtf3qcoahgfZY

[@AiuPal]

@@WaveformExplored Unbelievable... Thank you Brother, honestly 👍👍

[@WaveformExplored]

You’re welcome bro!

[@Shinkiro160]

I dont have any sound when i bring up the little keyboard. My sound test is good but nothing happens. I dont know what im doing wrong.

[@WaveformExplored]

@@Shinkiro160Sorry you are having issues. Do you have the record button enabled on the track. Also make sure the input of that track is set to your keyboard controller

[@dennisbergendorf5905]

Wonderful for creating rap videos.

[@laurarico4094]

for some reason i cant hear the output at all on the instrument from waveform, ive checked the midi devices and everything not sure what is wrong.

[@WaveformExplored]

Hmm. Curious are you using an interface or internal sound card? You may need to switch to a different driver setting like Wasapi or Asio. I would check to make sure the output is enabled in settings.

[@epicmemer5277]

I cant hear the digital keyboard edit: I had to put track 2 into midi ins

[@WaveformExplored]

Sorry you are having issues. Make sure your keyboard is showing up in Midi Devices.

[@epicmemer5277]

@WaveformExplored ty i fixed it

[@WaveformExplored]

Awesome glad you got it fixed

[@Dcmbr18th]

Why is mine taking so long to render. I did use some plug ins & I did record a couple tracks But there's only 3 tracks that I wanna use out of all recorded & A beat So 4 tracks total But when I try to export and render it It just says 0% & It's taking a long time

[@WaveformExplored]

I’m sorry you are having issues. Have you tried saving project and closing/restarting Waveform? It could also be a specific plugin that is causing the issue.

[@Dcmbr18th]

​@@WaveformExplored I'm using all waveform plug ins other than antares and fresh air Also my computer is a I3 do you think that's why to ?

[@Dcmbr18th]

​@@WaveformExplored So do you think that's why ?

[@WaveformExplored]

Your computer specs should be fine. Is it only on that project. Maybe try another project with one track and export that

[@WaveformExplored]

@@Dcmbr18th possibly. Whenever troubleshooting. Try to start with the most simplest solution, like restart computer or DAW, Next try disabling some effects to see if it works.

[@cyabongampaul]

i have a problem audio disappeared after mixer disconnect, nothing on the recorded folder

[@WaveformExplored]

Hello. I apologize for the late reply. Is it that your sound went out when the mixer or interface disconnected? Is this for every project or just that one project? Did you record something but lost the data or is it just not playing the audio?

[@cyabongampaul]

@WaveformExplored so, I was Multitracking a live event on my laptop with a ui24r, power went out during the recording and everything disappeared, then I tried with a sq6 power went out sane thing happened, everything disappeared, not temp files or recoverable, nothing

[@WaveformExplored]

I’m sorry about that. I don’t think that is recoverable. If all the power cut off during recordings. Waveform wasn’t able to write it. That definitely sucks.

[@inaz07]

PRECIATE IT

[@WaveformExplored]

You’re welcome. Let me know if you have any questions

[@ettiennelane9173]

thanks for this video. I've been trying waveform. for some weird reason importing wav, flac and mp3 files are problematic on playback. waveform automatically timestretch the files randomly. one moment it's in sync and the next it jumps to double time or some other speed ratio. no idea. is this an issue with waveform in general?

[@WaveformExplored]

I have to check into this further. So far it hasn’t done so for me. It might be associated with the tempo of the project and maybe a setting that is automatically stretching the audio.

[@ettiennelane9173]

@@WaveformExplored thanks for your reply.

[@Spooderkid420]

i cant hear what i made, i cant hear anything in Waveform

[@WaveformExplored]

Have you check audio settings and make sure your interface is enabled?

[@nde6626]

Please tell me how to set it to Chinese. This is very difficult for a person who is not good at English (google translate)

[@raphaeldukhan]

Hi Just go to Settings > Appearance > Get Additional Language. After a quick refresh it will offer you two options: Chinese (Simplified)/(Traditional). Hope this help!! Enjoy

[@nde6626]

@@raphaeldukhan There is no way to select Chinese in the language. Even after downloading

[@WaveformExplored]

@@nde6626 The optioned to select another language is there but it doesn’t actually work. It’s a something that probably needs to be fixed by Tracktion. I will submit a support ticket.

[@djzoneymusic]

waveform not as stable on a macbook than when it is on windows.... specifically the audio.... it crackles when inputs are enabled for some stupid reason

[@WaveformExplored]

Sorry to hear that. Have you tried raising the buffer size or latency?

[@djzoneymusic]

@@WaveformExplored i tried every single thing......event reinstalling the operating system .......waveform need to fix this problem for macbook users

[@chungusfungus9779]

Bro I’m brand new to making music like the most amateur ever , what am I looking at can u help me navigate how to use this I have no idea what I even looking at what do all these things mean I would happily pay u if you could help me learn how to use this shit

[@WaveformExplored]

I definitely understand what its like to first start recording and learning a DAW. I plan to provide more tutorials that will help. i used to do 1 on 1s but my time is so limited. I may have some available time next week.

[@chungusfungus9779]

@ thank you bro , I’m as Novice as they come like I didn’t know what a single thing on waveform is / does never been taught anything to do with music before. So if you could help I would happily pay you

[@funkymonkey529]

With asio You just adjust latency right on the DAW. That other step is completely unnecessary

[@WaveformExplored]

When I look at the buffer size for my Zoom L-8 specifically it only shows what it is currently set on. I still have to click on Control Panel to adjust the buffer size for ASIO. Now if it's set to another device like my X-Air mixer then it will allow you to set it right in DAW

[@user-you1193]

assio driver LOL