“I don’t recommend doing anything the way I do it because I’m insane!” 😂 9:33
@TalkingSasquach7 ай бұрын
True story
@Nivek3897 ай бұрын
Perfect timing! Thanks for all you do for the community
@TalkingSasquach7 ай бұрын
I appreciate you! Glad I could help!
@sn0ren7 ай бұрын
Of course Sasquach is always on point with the latest coolest flipper mods! I certainly wouldn't have the patience or nerves to attempt this one :D
@TalkingSasquach7 ай бұрын
That's why I have 3 Flippers!
@media-blinker27 күн бұрын
Now this is something I'd rather pay someone to do it. Bc I know I will fuck it up for sure.
@Fwaehcartifwaeh7 ай бұрын
I just got a flipper zero and you helped me so much thank you so much
@TalkingSasquach7 ай бұрын
I appreciate you! Thanks for watching!
@sidewayz247 ай бұрын
I love your content thank you.🙏. My Flipper arrives on Wednesday and I’m learning so much. My friend who is a programmer has one and I always wanted it.
@juliusdamanauskas6622 ай бұрын
I really want to do this but ik scared af
@TalkingSasquach2 ай бұрын
NGL it's pretty scary
@rodgerwoods497119 күн бұрын
Good job mate... Nothing like soldering something a little bigger than a grain of sand 👍. The mod gave it bite. 😊
@dj_johanna_joy5 ай бұрын
Whoop Whooop Could you tell me where did you get the design for the 3d models in 16:12 and 20:3? I spend the last 5 hours searching for it but i cant find it :(
@T1NKER1NG7 ай бұрын
Will the firmware changes be available on Momentum? If so, I will be more likely to buy it.
@daRock12127 ай бұрын
Nice work! It makes the F0 look like my modded out Nokia 3310 from 2000. But I had to take that to Chinatown to get done :) Luckily both play Snake
@TalkingSasquach7 ай бұрын
Nice! I had the older version that still had an antenna and I got an RGB antenna for it too!
@Nevis19887 ай бұрын
@@TalkingSasquach i had RGB Sticker :D
@Nevis19887 ай бұрын
That sounds cool, have only stock 3310 atm :D
@Kulderzipke1237 ай бұрын
Can u make a review on the pinecil soldering iron?
@TalkingSasquach7 ай бұрын
I reviewed my TS100, which is more or less the same thing, just a little better quality
@saski-v7hАй бұрын
the moment you cut it 5:15 something got in my eye LOL
@rodger6717 ай бұрын
Did you use pla for the buttons? Also, what were your settings for printing?
@TalkingSasquach7 ай бұрын
They're all PETG on standard settings
@samuelmcelrea59437 ай бұрын
When is HackRF 104 coming out??
@00zaee6 ай бұрын
Love the vid man ! Question where did you get that screwdriver from And what is It Called ?
Where'd you get the replacement lanyard block? Printed it, I assume? Unfortunately I no longer have my printer - living in a big city has its drawbacks.
@OneAndOnlyZekePolaris7 ай бұрын
Tape flying across the room be like my finger/toe nails. WATCH OUT SAFETY SQUINTS ON!!!
@Pattonccd3 ай бұрын
fantastic, where can i order the leds?
@pigmen116 ай бұрын
Question, only the egg backlight was available. So i bought it! Am i able to do the rainbow screen without the internal rgb pad?
@bmt6262 ай бұрын
Wait you don’t put the springs under the buttons when replacing them either the 3D printed versions?
@TalkingSasquach2 ай бұрын
So I haven't but the designer recommends it. I've done it without springs and so have others without issues
@DavidVilchis-r3f5 ай бұрын
Where did you get the printed buttons?
@adzowndu44924 ай бұрын
Can it do white I’m thinking it might help with the QR code and barcode display apps
@Herrhell6666 ай бұрын
why no one have created a case (like the silicon ones) but integrated with RGB? so it would be easier to get RGB for the flipper zero
@urbezzubka7 ай бұрын
Can you use momentum with this?
@TalkingSasquach7 ай бұрын
Unfortunately not. The implementation is a big wonky and it's such a niche product that it it might be a while before anyone wants to start trying to integrate it into their firmwware
@bpetke37517 ай бұрын
Does nfc work when the pcb on the back is on?
@TalkingSasquach7 ай бұрын
Yup, just gotta make sure you line everything up right
@bpetke37517 ай бұрын
@@TalkingSasquach alright, thank you
@Nevis19887 ай бұрын
Anyone in Finland who need those first rgb backlight boards have few laying around :D
@MrDerekJamison7 ай бұрын
20:34 - I loaded the video... too funny!
@TheSmithdub7 ай бұрын
I broke my pogo pins 😢
@ElectronDuino2 ай бұрын
Me too. I'm waiting for flipper to sell replacement.
@Kulderzipke1237 ай бұрын
So cool 😎
@TalkingSasquach7 ай бұрын
It is really cool!
@OneAndOnlyZekePolaris7 ай бұрын
Once I master soldering I will do this.
@emilia00017 ай бұрын
noice video!! 😎
@TalkingSasquach7 ай бұрын
Thanks! When u doing urs? 😆
@emilia00017 ай бұрын
@@TalkingSasquach haha right- beat me to this one :p
@AlexAlfarii7 ай бұрын
These deliveries arrive in Chile Santiago de Chile and how to know
@zR_CrackiiN7 ай бұрын
I feel famous 😅 Good vid mate 🎉
@TalkingSasquach7 ай бұрын
Thanks and nice work on all the 3d files!
@HotelHero7 ай бұрын
Oh alright I'll get rgb on my flipper... Seesh
@TalkingSasquach7 ай бұрын
Worth it.
@3liverse7 ай бұрын
Look very cool but I’m too cautious to try it on my own 😅
@DirtyPlumbus7 ай бұрын
I'd bet people would pay a premium for these pre-modded.
@OneAndOnlyZekePolaris7 ай бұрын
Safety squints because we don't need Crazy Russian Hacker's Number One Safety Goggles.
@iyeetsecurity9227 ай бұрын
*Rabbit Labs* hasn't had anything in stock for over a month. You keep advertising a dead storefront.
@TalkingSasquach7 ай бұрын
It's not dead, it's selling out quickly. They've restocked a ton of times in the past month. Join their Discord to get announcements.
@WirelessJ7 ай бұрын
Rabbit Labs is constantly restocking, their stuff just sells out really quickly.
@iyeetsecurity9227 ай бұрын
@@TalkingSasquach I can't stand Discord. It's just one long unorganized mess of text messages. If that's what it takes then I guess they must be ok with lost sales. It'd be a better business model to have an email waiting list or at the least frequent announcements of product ETAs along with producing enough product knowing what the demand is. It's more reliable to just purchase from the larger overseas community of makers.
@MichaelVanSickle7 ай бұрын
@@iyeetsecurity922 LOL he's literally always sold out... Doesn't sound like lost sales to me...
@SeanSkyhawk7 ай бұрын
@@iyeetsecurity922wow who hurt you
@ThePoloHat7 ай бұрын
Its cool how we are the first to comment and watch the video
@BerniesBastelBude7 ай бұрын
I would need 10 Flippers to modify one without breaking it...
@Dezederix3 ай бұрын
Or just buy the moded one :)
@Herrhell6666 ай бұрын
no way I can do this lol but I really enjoyed the video
@lucidnx3 ай бұрын
Oh, get some chocolate or vodka, your hands are shaking as hell! :D Otherwise good job, I know how hard it is with camera in between you and hands :))
@TalkingSasquach3 ай бұрын
Yeah filming makes it way worse. I can't touch the desk because it'll shake the camera, so I'm basically at arms reach fueled only by coffee lol