This fan DOES wobble

oO FYI- sarcasm is no longer used in title.
"""" Also, the 3rd pullchain is for reverse. All ceiling fans in Canada that were made before about 2000 have a reverse pullchain.
I had to JB weld the blade brackets... didin't do the best job at making them balanced.

[@hobbycentral3516]

THE THIRD PULLCHAIN IS FOR REVERSE!!!!!!!!!!!!!!!!!!!!!!!! idk it a canada thing

[@CRAIG86]

why cant it just be a swich like a normal fan?!?!?!

[@hobbycentral3516]

@@CRAIG86 I'm assuming Because a chain is way easier to reach than a switch that you need to set up a chair or a ladder to reach

[@CRAIG86]

​@@hobbycentral3516just stand on your bed

[@xangriffin8564]

Where was the fan made

[@Sirawesomej904]

0:56 "Da da da oh don’t mind my fan!" Got me rolling on the floor laughing. Lol😂

[@supermarnies]

The Other 2 Fans are Like:... WTF.

[@seth6525]

ikr XD

[@Zsullivan27]

0:59 I don’t know why but this part makes me laugh every time. 🤣 LOL

[@kathleenhome5546]

It’s like the fans are annoyed at what the guy said 😂

[@PorterTheFanCollector]

I know right?! 🤣🤣🤣

[@victorlitwinko9502]

0:46 sounds like a train

[@finneganthao9164]

Yea

[@tomcollett1893]

Naturally, the reason ceiling fans wobble like that is when the blades aren't fully aligned, which causes that rotational imbalance. Even if one of the blades was slightly out of alignment (as in a few millimetres), that can still happen. One way of finding out which blade is out of alignment is you start the fan up for a few seconds and then turn it off, and then go and stand somewhere where you can align your eyes with the tips of the blades and the corner of the ceiling, standing as still as possible. You should be able to identify which one of the blades is slightly out of alignment and then you'd be able to straighten it.

[@xangriffin8564]

Helpful

[@aliciajones1035]

lol that wobbles like crazy

[@Tylergage07Productions]

This video has aged like fine wine

[@Kasey1776]

That’s balanced very well!

[@hobbycentral3516]

I know right!

[@Kasey1776]

What kind of fan is that by the way? It’s a nice fan.

[@hobbycentral3516]

It's a Nadair . I don't know the model name/number. It doesn't have any stickers on it.

[@Kasey1776]

Yes

[@firealarmtechguy4444]

@@hobbycentral3516 Encon Princess Knockoff

[@therealbowser3339]

It's the most balance fan in the world

[@hobbycentral3516]

Finally somebody who understands!

[@TheFanUniverse]

Hobbycentral LMAO

[@torythefanman]

Surprised it did not fly off there..LOL

[@hobbycentral3516]

***** Lol I was surprised none of the blades flew off lol They just randomly fell off while it was sitting unused during the summer, I walked in to get something and they were just sitting on the floor.

[@torythefanman]

LOL! wow. thats funny.

[@GoneForGood22]

look at ryan's bar and grill there's is 10X as bad as this

[@seth6525]

@@hobbycentral3516 good thing the fan was off becuz if i t wasn't (X_X)

[@catsbyondrepair]

Jb weld sucks

[@LuckyTheWolf69420]

Imagine that fan on a downrod!😨

[@seth6525]

yikes!

[@ACFC.1000]

That would be scary!!

[@daprosceilingfans4221]

😬😬😬

[@BRISTOLFORCE2009]

I’d be terrified

[@caitoschannel3562]

It might fall😮

[@tpirman1982]

That's very wobbly.

[@dannycubesnfansproductions3217]

Nadair: i'm going to make the Canarm Unity and the Galaxy's blades wobble Canarm Galaxy: HOW DARE YOU NADAIR Canarm Unity: WHY DO YOU WANT OUR BLADES WOBBLE? Nadair: because is for fun The two Canarms: THAT'S IT! I'M TELLING SOMEONE TO TURN YOU OFF!

[@Account-mc8sr]

Nadair: NOOOOOOOOOOO!!!!!!!

[@ventiladorcarreras8244]

The two canarms:YESS WILL CALLING TO OFF you >:)

[@jackwiley7961]

0:59Told you we shouldn't have let him come over.

[@silent7563]

Jack Wiley LMAO

[@seth6525]

XD

[@Turbofanman13]

Charlam galaxy: dude why is he here SMC Laguna: he wanted to come over Encon princess: y7stsyray7tstisyodsr

[@anshitaa.srivastava100]

Thanks

[@seth6525]

@@Turbofanman13 XD

[@Umarbeksmegatemplate]

Hampton bay elsathedano ceiling fan

[@connermichel837]

That too wobbly

[@MogamiK32]

Conner Michel I think that's an encompass princess from 1984

[@connermichel837]

PineappleTurddle But with different blades, light shade, and Blade braket

[@wesleysceilingfanjoint5255]

Even though it's so wobbly it's kind of nice fan

[@pcorf]

One of the blades is badly out of alignment because of bent blade holders. Maybe before you installed the fan, the fan was stored blades down and over time it warped the blade holder.

[@PorterTheFanCollector]

Appears to be a spinner with round tipped blades

[@fanssmoothiesandantiques7443]

I love fans that have a reverse chain

[@PorterTheFanCollector]

Very rare and cool features to have

[@PorterTheFanCollector]

The reason for all shaking to the other 2 fans is that it is a flush mount install. If it had a very short down rod instead, the shaking would not be as effective on the rest of the room.

[@tyronlemons5203]

2:09 "my light doesn't like the wobbly fan" most fans are like that mine for example I'd have to replace the bulb in about a month and the other ones are fine and I have a harbor breeze Mayfield

[@ZappingHero]

0:40 - 0:55 lol, I remember doing that on my video of my Hampton Bay Farmington controlled by the slide dimmer (back in June of 2011), only I did just regular, sped-up and slow-down on my file (I took when I accidentally broke the chain off).

[@hobbycentral3516]

lol I remember that vid, and yeah I liked how it sounded slowed down twice

[@ZappingHero]

Oh and I like the effects at the end too, lol. :D

[@hobbycentral3516]

ZappingHero yeah I thought I would do something to make my vids stick out a little, so I thought I would throw in trippy stuff like tht lol

[@dkintana]

What Type Of Ceiling Fan Is That? December 3 2016

[@thatonelonelyeagle5398]

Woah this is an interesting fan the housing spins with the blades!

[@hobbycentral3516]

I believe they are known as "spinner" ceiling fans

[@hobbycentral3516]

definitely an interesting design though

[@asgharmoheuddin1301]

@@hobbycentral3516 tyllrlllgLapg

[@brentfisher902]

You should overclock the motor and put car balancing weights on it to make it wobble so quickly it falls off the ceiling.

[@hobbycentral3516]

That would actually be pretty entertaining!

[@Account-mc8sr]

But that would break it don’t

[@Varkyorsomethingstupid9963]

Remember when this video was called this fan doesn’t wobble

[@IHAP563]

You will need a new blade set as well as you will need to tighten the fan

[@mtgau2000]

LOL THE CEILING FAN WOBBLES BECAUSE ONE OF THE BLADES BENT UP BUT WAIT I LIKE YOUR VIDEOS

[@taronjeroneharris1313]

If you straighted up that one blade on there, that should cut down on the wobbling. The reason why it's doing that is because with that blade being bent like it is, it's causing the fan to be out of balance. Other than that's it runs good.

[@hobbycentral3516]

No it wobbles because it's cursed! lol check it out with new brackets in this newer video of it kzbin.info/www/bejne/e3m5pZ-si7KVh6s

[@conorodonnell8142]

The ceiling fan is so wobbly because the blade is bent and the light kit globe is shaking on the ceiling fan. And the ceiling fan pull chains are banging onto the ceiling fan fan light kit globe.

[@samlarkin1810]

I once had an industrial fan in my room and it was literally hanging by the wires it was so wobbly that the people that moved in afterwards didn't know that it was so wobbly that it fell down.

[@ThatSkyKyle]

Oof…that must’ve been terrible…did they get a new fan? Because when one of mine fell I got a replacement fan

[@Gambonnerfans]

I wanna see this thing on a down rod with no set screws

[@hobbycentral3516]

That would have been epic

[@MrBonanza747]

0:49 the fan song

[@REALMichael2011]

This is like my old Ceiling fan that I had since I moved in my house One day it was leaning when I was sleep and in the morning I took it down and got a new fan in my room Then I put the old fan and hooked it up in the garage and it works!

[@hobbycentral3516]

Nice!

[@gqinc1202]

i think i see the problem the fan has an extra pull chain on the light kit

[@seth6525]

OH YEAH WHY DIDN'T I THINK OF THAT?! XD

[@dkintana]

Why are the blades going from left to right? December 3 2016

[@rrgvideos6556]

This was my child hood video🥲

[@CajunBeauty1]

the fan needs to be replaced it wobbles so much

[@jacksonproducedit352]

That is one messed up fan right there.i am glad that's not in my house

[@hobbycentral3516]

Yeah it's quite a hazardous unit. The funny thing is I used it for probably a month on low after this video and the blades never fell off, but when I went back into that shed in the fall two blades were snapped off and laying on the floor.

[@katthefanenthusiast5793]

Hobbycentral !

[@jazziegee5964]

Hobbycentral you should get a Hampton bay glendale

[@katthefanenthusiast5793]

He could have pput a better fan there.

[@hobbycentral3516]

Kat Fan I definitely could have, But I wanted to see how good the jb weld would hold up.

[@SunshineRoblox-ch4up]

wow the fan shakes too hard that it causes the other fans to wobble too☺

[@seth6525]

yep XD

[@sunshineofepicness1815]

OMG Hi old account

[@joshd8624]

don't worry guys it won't fall!

[@seth6525]

yeah totally!

[@Tap721]

Thing shakes the whole building lmao

[@thatretrocattt]

That does look quite unsafe to be honest.

[@dkintana]

2:11 My light doesn't like the wobbly fan. December 3 2017

[@abpp1]

it dose wobble!

[@emmanuelyates678]

It probably need need a glued on the ceiling fan from wobbling

[@imaxdjdbdbdbdb4954]

That fan is so similar than mine

[@GrandTheft60116]

This Fan Is Dancing Hahahaha

[@stevensteele249]

Very Pretty Fan

[@prestontowne7200]

I wouldn't have that much wobble on my fan. It makes me not like that fan, but it can also be fixed.

[@hobbycentral3516]

Yeah it's not very practical lol;

[@dkintana]

What does the thrid pull chain do on the ceiling fan? November 3 2023

[@hobbycentral3516]

3 words. R e a d T h e D e s c r i p t i o n =D

[@Syd693]

You could get enough air by that

[@ACFC.1000]

Do a video of the same thing but the really bent looking heritage ceiling fan

[@hobbycentral3516]

maybe someday

[@fansambulancesrobloxandmor6894]

This fan wobble

[@williamcase1514]

It's pretty wobbly

[@retroelectronicnerds9482]

nice that you woundnt need to get a stool and reach up on the side of the fan to switch it. When people actually have good ideas...

[@Collin2877]

If u were wondering the third chain is for reverse and forward

[@IamCollector155]

Yeah

[@Mrs.Glendale]

abandoned ceiling fan

[@FanOfCars2006]

Wow three pull chains pretty rare.Mostly they would have one or two

[@PorterTheFanCollector]

The other was the reverse chain. They were used before the switch was invented.

[@LuckyTheWolf69420]

Now that's what I call Walmart quality!!!! (I think) 😂

[@blanchonqc5716]

The blades were welded badly

[@user-mh8gr7tu4j]

10 years!

[@malachistar]

That's a fast wobble

[@mtgau2000]

DA DA DA DA Oh don't mind my fan!

[@connorsceilingfanworld1905]

Yeah 🤣

[@joshd8624]

old fan?

[@TOPGamesYT-]

I don’t know how to say it but you know what you mean by my fan

[@REALMichael2011]

Is that an attic fan?

[@theceilingfanguy4041]

can you make a nother vid of this fan and make it reverse

[@hobbycentral3516]

I would, but 2 of the blades broke off and I'm not brave enough to run a ceiling fan with jb welded blades anymore lol

[@jamesnguyen4034]

Like that fan

[@rosarioaceves235]

Need new one right away!!!!

[@TravellerCarlos]

It wobbles!

[@YummyHappyKikiTheCat]

Ik

[@sunshineofepicness1815]

@@YummyHappyKikiTheCat wat are u doing outside the safe place.

[@legocamcam8450]

I have that same fan in my den

[@livionaves]

That fan has a terribly bent up blade, no wonder the wobble is so bad. It has stencil blades? What is the name of this fan?

[@hobbycentral3516]

+Maverick 3458 Yeah I didn't make sure they were balanced when I glued them lol. No the blades don't have any stencil, and It's a Nadair something or other, I cant remember the model number

[@Ceilingfans94]

+Hobbycentral LYER!!!!!!!😡😡😡

[@TravellerCarlos]

+AdamTubefans47 Did You Mean Lier?

[@ThatTexanCollector]

Both 'y'all wrong it's Liar

[@kingofthecarwashes6724]

That fan knows how to do the ceiling fan dance XD

[@ssakamag]

dancing ceiling fan

[@kalebmelancon854]

It wobbles

[@Averythefanman]

0:44 I laughed hard.

[@katthefanenthusiast5793]

I find the part at 0:58 the funniest.

[@unitedstates4471]

0:44 It got to the point of vibration

[@lightsfansofthewest481]

It's in fast forward.

[@CajunBeauty1]

you know you can get new brackets for this fan that blade is bent almost to the ceiling yep it need new brackets

[@randomperson7443]

What model fan is in between the other two? My grandma had a fan like it that fell down in her bedroom, except hers was brown.

[@hobbycentral3516]

That is a Canarm Unity. it fell? hopefully it wasnt on top of her bed

[@randomperson7443]

She also had the 3 Chain fan in her dining room, but hers only had 2

[@roshanr16896]

Why does it have 3 pull chains

[@TheCeillingFanAndAcKid44]

Guys put the vid on 2x it's hilarious 😂

[@spirit861]

I didn’t know how the fan could wobble the blades on that other Hampton Bay Littleton I THINK

[@hobbycentral3516]

It was shaking the beam that all those ceiling fans were mounted to. the beam was actually barely even nailed down lol. just so you know, the other smaller ceiling fan is a Canarm Unity, and the other larger fan is a Canarm PF-42

[@garyjones8752]

That’s a Hampton bay graton

[@NickTubeFans]

No it isn’t. Hampton Bay Graytons are different.

[@sunshineofepicness1815]

@@NickTubeFans Hi :3

[@Michaelthehoney]

Omg it sound like gun

[@Varkyorsomethingstupid9963]

0:59 encon:oh my gosh Unknown spinner: reeeeeeeeeeeeeeeeeeeeeeeeee 0:40 Hampton Bay reeeeeeeeeeeeeeeeeeeeeeeeeeee

[@ThatSkyKyle]

A three pullchain fan…my three pullchain fan had an upper light

[@CajunBeauty1]

I mean the wood part

[@CajunBeauty1]

does this fan have new blades yet?

[@hobbycentral3516]

No I haven't came across any blades brackets yet.

[@TheFanUniverse]

But you said it doesn't wobble LOL

[@QuamellsFanChannel]

Its called sarcasm

[@b1uesi1ver66]

minigun?

[@pupsthepawpatrolfan9047]

YEAH SCIENCE

[@calvinmayo7990]

wwwoooowww that is wobbling SSSOOO much

[@lennongroover4189]

You need to just carefully bend the blade down with out breaking it or just replace the whole blade

[@hobbycentral3516]

I have long since got new brackets for it lol

[@ThatTexanCollector]

Fan?

[@ilovefans-x1m]

Grayton?

[@charlesthefanboy1317]

My crosswind hums like hell

[@seth6525]

smae to my hampton bay grayton 2

[@alyssaschannel699]

What's a there pull chain on the fan you didn't touch

[@hobbycentral3516]

Thats the self destruct pull chain jk it's for reverse

[@rickroll1182]

1:08 just make me happy