This GAN 15 is Built Different (literally)

Рет қаралды 14,330

TheCubicle

Күн бұрын

Пікірлер: 97

@JohnAJ-07 5 күн бұрын

3:24 PHIL ROTATED IN ZZ WHAT !

@AColdCuber 5 күн бұрын

i said the same thing!

@KennedyLewicki 5 күн бұрын

Sad Phil

@pengusplayz5756 5 күн бұрын

It was to skip oll, this is one of the only times you would rotate in ZZ

@Cocoscz 5 күн бұрын

I was confused for a bit too, but as you can see, he got oll skip and before had corners in certain possition a cross on top so he probably knows some fancy algs

@finnjitzu8871 5 күн бұрын

He didn’t need to rotate he got triple sexy

@SerKubos 5 күн бұрын

Video with yiheng when

@Cubing-Dude 5 күн бұрын

we need a tymon vs yiheng

@Cube_kid11 5 күн бұрын

Next Tuesday

@Philosopher392 4 күн бұрын

@@Cubing-Dudethey still need to nerf Yiheng

@MinhHien091 4 күн бұрын

@@Philosopher392 buff both of them so they can get sub 4 avg

@nicholascrow8133 4 күн бұрын

There's a three week cooling off period in the training dungeon where they aren't allowed to leave...

@skwebjacob 4 күн бұрын

"we wondered so much that we actually did that" great quote

@josh-speedcuber 5 күн бұрын

69$ for maglev and 75$ for spring ☠️

@MinhHien091 4 күн бұрын

"the springy the better" - me 2025

@AlexMaass 5 күн бұрын

Cool stuff, always love to see what kit ideas Steven comes up with

@Anthony_Jiang 5 күн бұрын

Cool as hell. LBL designs is cooking so hard

@xp.wesley858 18 сағат бұрын

In all seriousness, I honestly think the GAN 15's maglev is already very controllable on nearly all settings on my cube. The problem I have with this cube is the insane number of internal catches this cube has. It's like the first batch of GAN 12s all over again.

@Cubinginatree 5 күн бұрын

Me: I honestly forgot my GAN 12 was maglev it’s so controllable and nice! The cubicle:

@blu6410 5 күн бұрын

cuz old plastic not so smooth

@Cubinginatree 5 күн бұрын

Phil in a sweatshirt is crazy

@WildScaryFox 5 күн бұрын

No LBL sticker? Also, we finally have FZ setups! Thanks for listening to my feedback!

@pandahhh9115 5 күн бұрын

I also suggested this

@ts2722 3 күн бұрын

Loved the outtake! 🤣

@testomatto 4 күн бұрын

Welcome back to Gan 11 m DUO :D

@titanchicken3275 4 күн бұрын

Marvelous

@georgegarcia566 4 күн бұрын

Loving the blooper! 😂

@thegreattrapofthewest9609 5 күн бұрын

“I’m built different” springed GAN (probably)

@coconutcubes5750 4 күн бұрын

3:04 thanks so much for pointing this out. Maglev is severely overrated.

@sandman6088 5 күн бұрын

Hey guys, it'd be really cool to hear your thoughts on the Weilong V10 Limited edition sometime. :)

@CXLVII 5 күн бұрын

It's a v10 with less magnets, there's not much to talk about

@jow_angelow 4 күн бұрын

@@CXLVII weilong v9 SE had less magnets, that turned out better than the regular v9

@NoahCubez 5 күн бұрын

I think i'd still like it better with MagLev. I might get one on Black Friday! Also i love flexing layers at 4:18

@StormRaid417 4 күн бұрын

The last time I liked Gan was with the Gan 356 i3. I love having some weight on the cube to have more control. This year, it sounds like MoYu has always done a better job and makes Gan sound overhyped. The MoYu Weilong V10 is my next one or maybe an older version because they've always done great. I've been cubing for almost 12 years now, and Gan was my first ever speedcube alongside Jperm's RS3M, which is still amazing. I was sadly stuck with a normal Rubik's cube for the longest time😂

@ReubenBBX 5 күн бұрын

What would happen if you put springs in any gan cube? Oh idk i guess it would slow down.

@SolzOnumaegbu 4 күн бұрын

Im sticking with gan 11m pro

@TitodoPradoCacau 5 сағат бұрын

Hello Phil Yoooooo!!!

@Minimus408 3 күн бұрын

What lights are you using for the studio?

@trippletm1756 3 күн бұрын

Hello, i recently bought a gan 11m pro mystic dnm37 and weight 5 : is it a good combo and howmuch do i use?

@RB-pp5tv 4 күн бұрын

Thanks, Phil. Can you also de-maglev the 20-magnet Weilong V9? That may besides reducing the weight significantly, by removing the maglev and the edge magnets, also make the cube more controllable.

@ole9071 4 күн бұрын

Everyone can do that...... demagleving the gan 15 was a challange since u needed custom pieces, demagleving a v9 is just putting in a spring, sometimes a washer

@StevenWintringham 4 күн бұрын

I have done that and imo it helps quite a bit

@RB-pp5tv 4 күн бұрын

@ole9071 Thanks. How can you get the edge magnets out, from the V9?

@StevenWintringham 4 күн бұрын

@@RB-pp5tv I just used edges from a standard v9

@StevenWintringham 4 күн бұрын

@@RB-pp5tv but with a 20 magnet core, you should leave them in

@Cheetahbite58 4 күн бұрын

first thought it was the customizable one

@bigbrojhay334 5 күн бұрын

GAN is making moyu-like-cubes so that yiheng comes back😂

@Mr.RubixMan 5 күн бұрын

YEAAAAHHHHHHH

@cmorgan0_95 4 күн бұрын

Does the conversion kit work with the Gan 12 or the Gan 13?

@jow_angelow 4 күн бұрын

12 has the leap version tho

@BWB_Cubing 4 күн бұрын

3:32 lol tf are those messages

@jayeluri12 5 күн бұрын

Does this kit work with the og Gan 14 (not Pro)

@Qubze 4 күн бұрын

Pls make vid on Wrm v10 special edition

@humberthagansayan773 5 күн бұрын

What is the Spring Size of the RS3M V5 Standard? Both in Diameter Wire Diameter And Length

@ІО-24ЗахаровСвятослав 5 күн бұрын

This looks like a chat gpt prompt, ain't nobody answering this here

@humberthagansayan773 4 күн бұрын

@ІО-24ЗахаровСвятослав what? No I was asking the size of the springs because I want to buy it

@kimocheese8433 5 күн бұрын

Does the maglev bottom half get scratched on by the spring?

@StevenWintringham 4 күн бұрын

for the most part, the spring should stay still on the bottom and rotate relative to the top

@RB-pp5tv 3 күн бұрын

@@kimocheese8433 Maybe add a washer at the bottom? Take the washer from an old cube. There's usually one between the screw and the spring in those old cubes.

@rubiklgb21 4 күн бұрын

Can I enter your team Phil?

@AveryHyena 5 күн бұрын

So why not just put slower lubes in a cube if you want it to be slower and more controllable Why do people refuse to give up using faster lubes like dnm, but then complain that the cube is too fast I just don't get it

@sofiamn_05 5 күн бұрын

Making the cube itself slower is wayy more sustainable than pumping slow lube into it constantly. It also changes the feel of the cube a little bit, and if you prefer slower cubes, having it be slower as a baseline makes it way easier to customize with lubes.

@AveryHyena 4 күн бұрын

@@sofiamn_05 "Making the cube itself slower is wayy more sustainable than pumping slow lube into it constantly" - But how? This implies that cubes speed up over time after you put lube in, which is not the case? Cubes get slower as they get dirtier, don't they? Also, why doesn't this logic also work for "Making the cube itself faster is wayy more sustainable than pumping fast lube into it constantly"? No one seems to believe this, because everyone seems to always want slower spring cubes, but use extremely fast lubes. So why is the solution to make a cube faster always "use fast lube" and never "use maglev", but the solution to make a cube slower is always "use springs" and not "use slow lube". That just seems a bit inconsistent to me.

@StevenWintringham 4 күн бұрын

@@AveryHyena slow lube speeds up as it breaks in. Like sofiamn said, the goal is a more controllable baseline. Springs and maglev also have different feels and performance characteristics. Magnetic force is non-linear, which changes how the cube responds to flexing. Corner cutting on maglev cubes tends to feel harsher, but maglev also helps cubes maintain their cubic shape because the magnets use more force than springs to try to get back to their resting state. Speed is the easiest factor to explain, so that's what we usually focus on, but there is a lot more to it than that