This is THE BEST Upgrade for Onewheel

[@nathanofearthh]

Give this to whoever edited this video because you killed it with this one. Love the memes, jokes and style lol ❤

[@TheFloatLife]

Dang, now I owe Julian $10!

[@Argotiers]

This and the MTE Promo are perfectly timed for what I need for my VESC build, perfect timing!

[@mattbaillargeon]

Definitely timed on purpose 😝

[@gergosnoo]

You got my like 10 seconds in with this brand new intro. I love Float Life videos!

[@TheFloatLife]

New intro is a serious vibe for sure

[@GravityWrangler]

It's so true, I bought on the deal and am in love, absolutely love. Thank you for making my board so much better. Softer, more powerful, beautiful, just fantastic.

[@bryantrush6844]

Very happy with the MTE 5" hub. It's the best upgrade I've made to my GT. It really helps you navigate the bumps and cracks you encounter while riding. The extra torque is definitely a plus!

[@stephenjhunter]

You guys are absolutely killing it with the new parts and the video editing is sweet.

[@bustergb13]

I love love my MTE 5" best upgrade to my gts . Thank you guys!

[@KDelta2]

Talk about 655 vs. 555 please!

[@CayoticProphet]

This! I had the same question. If I had to guess, 655 could be for the extended rails so you can maximize the extra space in the middle with more "meat". My question is, if it is a bigger tire in circumference, would that increase or decrease top end speed? However, those numbers may not mean what I think they mean.

[@KDelta2]

I just want to know if I'm a trail rider, is this really that much better than 555. I like nimble, but need stable

[@psydwayze]

655 = 11.5x6.5x5 (standard width) 555 = 11x5.5x5” (1/2” smaller, 1” thinner)

[@CayoticProphet]

Thanks for clarifying... Is this 1" inch less in side wall width or the width of the tire from axle to axle?

[@chewypinecone]

@@CayoticProphetaxle to axle

[@1800Swagg]

I do hope you’ll run this when the N52 is in stock for GT’s. I’m signed up for notifications and I haven’t seen it come back in stock yet. When Jeff says you want N52 for your GT-S then that means I gotta wait.

[@Anonymous-xp7ze]

I thought the same, and then I realized my GTS makes it up the steepest hills easily after the gradient tracking update. I got the N48 since there will probably not be a sale like this again. Most of the demand for these hubs comes from GTS owners since N52s have been out of stock for the past month. As any good marketer would do, Jeff made this special promotion to sell MTEs with lower demand, which are N42s and N48s. As this promotion indicates, you'll never see a sale this good for MTEs again. With slightly less torque, you'll get more range as an added bonus.

[@gregackerman8757]

Just shut up and take my money Jeff! That deal you put out today for the bundle was TOO GOOD TO MISS. Can’t wait and stay awesome TFL!

[@permawheelie]

Just as the CBXR was *THE* upgrade to have in the XR days, the MTE answers a similar demand today. I am fully confident that I would not be able to do what I can on a board with a 6" hub, let alone a 6.5. MTE forever!!!

[@really_jack]

HAD to level up my old XR.. now it’ll match my GT MTE setup 🎉🎉

[@xsixinfantryx]

Which magnets you use? And match it as far as what? I'm really thinking about doing this

[@GeneWuzHear]

I've hesitated and missed out on so many deals from you guys. But not this one! My old man knees are going to be so happy! 🎉

[@Obi_Wanwheel]

Dat PROMO IS CRAZY! Copped🤙🏽

[@TheAnimeist]

Homie, Thanks for pouring those Bang Bumpers for me. Easy install, and buttery. You're the Louis Vuitton of Onewheels.

[@Jameslangford-rc6sw]

New into is a dub!! Teasing the footpad hard too. I would love to talk with Jeff for a bit about my situation and the potential to switch to vesc. Great vid!

[@SeanPaulNotTheSinger]

First, I love the new intro, I've been meaning to say that. Second, can we get rain checks for the n52 hubs? 😅 I keep whiffing on them. I'm in the Clydesdale range of rider and would like to get more of that torque, and as I'm not a speed demon, losing it at the top end doesn't phase me in the slightest. 😅

[@klxz79]

Will the N52 MTE for the GTS become available before this promo ends?

[@danbrown6925]

Wondering about the difference in rim size and magnet strength what effects it has on mile logging and secondly battery range. Newish to these so if it’s a wonky question forgive me. I would assume higher the torque the Lower the range of the ride also. Something I’m sure many folks wouldn’t care much about for the low to mid range bang. I re gear all my motorcycles with -1/+2 combo to get the same effect with those. Seems very similar. Perhaps since you go down on the rim size it equals out closer with battery range. Something to know for sure

[@stop_running]

I like the new intro you guys rocking!

[@MisterNutty]

It's about time to replace my tire and now I want to replace the whole hub. THANKS JEFF! :P

[@jaefrmbk2k]

exceptional MTE promo ⚡️ 👏🏾

[@TimsTown]

Thanks for the vid, I have been wondering what the real difference is. I was thinking it would be worse on the trails but now I see them side by side I can see that it would be so much better for trails. Kind of sucks that I already got two extra tires for the larger rim already.

[@Kaisolostudio]

Sell em?

[@aircraftmech123456]

I busted out laughing when Jeff said, I don’t know going 40 mph is a good idea on a gts…

[@psydwayze]

onewheel street racing’s gonna get to +40mph sooner than we think

[@quangyung6751]

You would think FM should of went smaller on the get go to corner the market but I guess they don't think outside the box like float life.

[@auden_builds]

that arbys sandwich look bussin

[@TheFloatLife]

Best comment award

[@chrisc790]

If you like liquid meat 🤢🤮

[@AlexLepoutre]

Agreed. N52 on the GTS is 👌 655 Enduro when tho..?

[@TheFloatLife]

How about right now? thefloatlife.com/collections/tires-bearings/products/tfl-655-enduro-tire-mte-5-compatible

[@1800Swagg]

No joke the editing was banging 🎉

[@JamesCR636]

The new intro... spot on

[@braylanstringfellow-vc6hd]

So what is the difference between the XR and GT version and which one would you get if you wanted it for a pint x?

[@chromatyp3]

just bought mine at school during class today

[@michaelspandau6805]

Jeff please get more n52 and n48 in stock and keep this sale going. I’m sure there’s a lot of riders out here that want to do the conversion but are put off by the total price. Let’s get everyone switched over. I want to know what the hypes all about.

[@Emth_]

ive been wondering if the different magnets affect how much the stator has to work and in turn how hot it gets? or is that a negligible difference?

[@gymkhanadog]

Maaaan... I've been out of OW for like a year due to a back injury, and now shit's all different. Sounds like I need to order up an N52 hub for my VESC'd Plus. Heavier rider, 16s pack, I love riding trails and really billy-goating my board at low speed.

[@CayoticProphet]

Damn it Jeff! My TFL Shopping cart currently has $1,000 in merch waiting to checkout... Most of it is to make my stock PintX fit in with my 4 TFL XRs. So are you suggesting I drop the WTF Pint rails and go BTG on my CBXR trail board? Where do I even get a motor for that? I would rather add a motor to cart before cannibalizing the XR hub. I'm building a VESC controller. I have everything I need to complete a build from scratch except the hub/motor/tire. Edit: 8:21 Anyone else notice the EMS siren go off in the background after Jeff said, "I don't think going 40+ miles an hour on a GTS is a good idea anyways." 🤣 Even God agrees... 🙏 Edit2: Removed Pint X WTFs from cart but I still got the Kush Nug Hi and enduro for now. The MTE purchase for my CBXR is more practical and justifiable. Went with the 655, N48, steel red bearings. Since you don't sell the ceramics in red. I wonder if I should have got the more nimble 555 but then again, that's what the Pint X with enduro is for.

[@theinternationalhobo]

Please introduce a stator in the lineup , or a full motor and you guys own the float life going forward

[@AdamDelVecchioA-Bomb]

More rubber on that sidewall is great but it’s also time for the industry to consider bigger diameter tires AND shocks as has been done in MTBs. Of course, the bigger diameter tire would necessitate bigger opening in frame/rails for it.

[@TheFloatLife]

Shocks will be awesome when they come out. The problem is FM has patented a bunch of different shock designs so basically no one else can design anything with linkage for a one wheel

[@AdamDelVecchioA-Bomb]

@@TheFloatLife As you’re probably aware, there’s a guy who makes and sells a single mount OW shock but I’ve yet to try one. Maybe you should partner up.

[@yoschill5778]

Hey I have a question I want to vesc my gt how does the hub increase the top speed of the vesc? Is the 48 or also the 52 one almost faster than the stock gt if u use the vesc?

[@g00-eye10]

I like the new intro!

[@ShotFitness]

@thefloatlife any fuller deets on how to get this set up on a pint x? maybe a video install and ride???

[@francisdionne408]

Would like to have more information on that as well!

[@orientalwoodworks]

That animation is so sick👌🤟

[@THEcjustins]

What is the weight difference between this setup and stock on GT??

[@cyrilguer1115]

My MTE with N52 magnets weighs 2341g. My stock GT hub 3139 g including life savers. The enduro 5”soft weighs in at 1554g whereas the FM Perf treaded is 1561g

[@laurentbeauregard4666]

Seeing some other requests of what riders want to see discussed further. Saw someone talk about tire size, I’d be curious to know more! What I want to ask is what’s the weight difference. You’re talking aluminum vs rubber, there has to be some weight savings, no?! I got mine coming this weekend so maybe I’ll do a video for you guys!

[@aaronlarsen8412]

How does the 5" hub work compared to the gts hub? Will it still have the same power and torque? Compared to the gts magnets?

[@TheFloatLife]

The N52 are going to be the same strength magnets.

[@LookitsTook]

Is Vesc or a 5 inch hub a better upgrade for an XR?

[@thetruth2706]

Man that Arby’s 1/2 pound beef and cheddar melt is my shyt!

[@TheFloatLife]

extra meaty

[@bash6519]

do you guys have data on the increased Torque of the 52 and 48 magnets? the extra sidewall is great but I'm really after more torque being 6'2" 235lbs. I see the Superflux Motor published 80Nm+ on their MkII high torque motor. I dont expect the MTE to be that high but id would be nice to see what kind of increase we might expect by upgrading. Thanks guys and great job!

[@TheFloatLife]

No firm numbers, but we are in the process of building a dyno

[@clayfreshour1753]

Great video. Thanks for sharing

[@klbensonsk777]

@TheFloatLife talk to me about tire pressure. What’s the new normal?

[@loganlaviolette3494]

I really thought you were gonna say vesc is the best upgrade lol after Nico’s video the other day

[@BenjaminGuidry]

Will the bearings come preinstalled when ordering the MTE promo??

[@TheFloatLife]

Yes

[@Zetler]

Did FM rationalize why they went for 6.5 inch if smaller is better?

[@andrewwong1659]

To corner the GT tire market

[@CayoticProphet]

@wong1659 Yeah, talk about a straight dick move that was so blatantly obvious that even Stevie Wonder could see FutureMotion's 2D chess moves through 5% Limo Tint. FFM's anti-consumer decision to make larger proprietary hubs/tires had a bigger negative effect for the community than it created a positive NET gain for FFM financially. Likewise, FM also powder coated GT rails, which is an insulator, when they should have ceramic coated the rails to prevent the boards from overheating. Are these results of poor marketing decisions or are the FM engineers so drunk with power that they wouldn't think we would notice? I hate to project the crimes of the Government onto the shoulders of FM but you have to ask yourself, "When should I consider departing from a toxic relationship?" Whether it's a relationship with Uncle Sam & Aunt Karen or a relationship with FutureMotion. Toxicity only breads more toxicity.

[@eevee4505]

any support for the growler riders out there? I got WTF growler rails and was considering getting an MTE but it sounds like the tire options are really limited in that regard :(

[@DirtSickle1]

Jeff I'd love to know what the real differences are between yours and 5" Billet from 1wheelparts if I'm looking to put one on a GTS. Thanks!

[@TheFloatLife]

I haven't ridden theirs, but I'd imagine they are fairly similar

[@DirtSickle1]

@TheFloatLife His site recommends, or I think they only go with the N48 magnets on the GTS. He's flying setting times on strava. I really wonder what's the best option for the gts the N52 or 48's. Guess I'd have to ride them side by side. It would be mostly for Granite Bay trails and lake Natoma loop at 210lbs

[@tonyrivas8952]

I love the MTE but since converting to VESC with a SuperFlux motor I can't run a 5 inch wheel. I would love to run a 5 inch but not at the expense of having to go back to a Hypercore.

[@McLainem]

Could you change magnets without getting a new hub? We’ve got an XR that could use some more torque

[@TheFloatLife]

Technically yes, but it would be such a gnarly project

[@QuangNguyen-wb5kd]

So which one do i need for pint platform? Mte xr ?

[@oldretireddude]

What is the difference between the 555 Enduro and the 655 Enduro in the 5" offerings. Which is closer to stock width? I have the original compound Enduro on my GT. Which compound, soft Vs mid corresponds to the original compound?

[@TheFloatLife]

mid 655 is going to be closest to the stock tire profile. the 555 is more nimble because of its decreased width, the 655 is more stable because it is 6 inches wide

[@nicoaleman]

Soft is the original compound, Mid was added mostly for those who are willing to sacrifice a bit of that comfort for some extra durability. But if you're looking to stick with the same compound as your current tire, Soft is the way for sure 👌

[@oldretireddude]

@@nicoaleman Good to know, thanks. I was willing to jump in for more torque but since the N52 is sold out, I'll wait for my tire to need replacement before I do it now. PS, I'm a fan of your competition videos.

[@zackfinnegan3901]

Can this use the mag handle? If not, what are my options for a replacement?

[@TheFloatLife]

Not maghandle compatible

[@NarDmw]

Given the extra sidewall on the tires with the 5" MTE's, does that mean that float savers are unnecessary? Obviously the rim sizes are different.

[@TheFloatLife]

Yes

[@CayoticProphet]

@@TheFloatLife Does this mean we won't be getting red life savers for the 5" MTW?😢I only want it for the aesthetics.

[@shadmcdaniel4184]

Like the video. Love the hardware options.

[@lukeroman2445]

so why is the GT hub 6.5" stock what IS the advantage of 6.5 then? whats all that rim do give you a stable firm tire to go farster?(honest question theres ups and owns to every design) and i'm all about this 5" esp since i ride my local frisbee golf trials 7/10 rides.. but really why did they go with 6.5 when they even had a smaller hub 6" on XR.. why didnt they just keep it 6.. and go up to 6.5?

[@richardpalan]

What about the range on gts? My friend who is 20kgs less than me and has onewheel gt just bought this n48mte, but now he has the same range as me with stock hub on my gts (100kgs)

[@philkremer6337]

does it fits on a Growler?

[@stokepusher5481]

Oh you gotta do a Monsta truck fun edit of a mini Float machine with the old clanky hub (make it out of wax) getting mooshed by that there rubber hubber, excess drama pls.

[@StraitJacketRC]

Let’s see more tire options for the pint x/s folks I want to build out my pint for now, instead of dropping like 3k on a new whip.

[@TheFloatLife]

Fun fact, the Lil' Duro fits if you pull off the fender delete

[@ericj1103801]

Wait why couldn’t you stack / alternate strong magnets with weak ones all the way around the hub?

[@bragnasty1873]

You'd make your motor/hub Vibrate

[@Davidwhat]

can we get a video on the way each magnet choice would effect range on the GT?... i'd like the n52s but do not want to get down to low GTS range.

[@TheFloatLife]

Range shouldn't really be affected unless you're riding more aggressively.

[@Davidwhat]

@@TheFloatLife it should make a difference since it takes more energy to move the N52 magnets.. there is more pull and less free spin so the motor has to push slightly harder. it's why you lose top speed. rpms go down because of the higher attraction to the magnets.

[@texasredfox7607]

Complete XR, ~1000 miles to trade in for the MTE hub for my GTS 😅

[@EdwardCoplinBatman]

How long before we get a 5 in on a floatwheel so i dont have to install this myself?

[@TheFloatLife]

Unfortunately that's literally impossible. The stater itself is 6 inch

[@nelsonfloats]

Yo great explanations, curious tho: can you put it on a Superflux? If so do we know how it compares to a normal Superflux?

[@auden_builds]

no superflux stator is too wide in diameter, and also most likely has different bolt pattern

[@TheFloatLife]

Superflux is a 6" stator so it's too big.

[@nelsonfloats]

@@auden_builds @thefloatlife okay thank you guys!

[@chantal7]

Will these work with the float blocks? 😅 maybe a silly question…

[@TheFloatLife]

They work with cold blocks: thefloatlife.com/collections/rails/products/float-blocks-gt-5-mte-compatible

[@chantal7]

@@TheFloatLife Thanks! I got the hub, so I'll have to swap back to original blocks for now... lol.

[@oldretireddude]

Are Lifesavers a thing of the past with this 5" rim?

[@TheFloatLife]

Yeah, you don't really need them with a MTE

[@kiltsandcomputers]

Essentially. So much rubber in the tire that you're not really in danger of breaking a rim, unless you're really low pressure in the tire and doing something super crazy

[@TheRyansp]

He keeps talking about top speeds over 20 MPH - but I thought the GT and GTS had max speeds installed in their firmware? Can someone explain?

[@TheFloatLife]

Kinda... the advertised "top speed" for FM boards is where pushback kicks in but you can go faster it's just uncomfortable

[@courtk6142]

Available for Superflux when?

[@DasAquaman]

GT with N52 MTE vs stock GTS? 😬

[@wayofflow955]

Jeff is the 7”x11.5” Enduros coming any time soon?

[@TheFloatLife]

Most I will ever go is 6.9

[@wayofflow955]

@@TheFloatLife 6.9x12 sounds good too!

[@theinternationalhobo]

I whould buy tins now if it had a stator so i could build a new custom board from scratch

[@dominicl1167]

does anybody make a jig for hub installation to avoid chipping a magnet

[@TheFloatLife]

Not that I'm aware of, but just go slow and you'll be fine

[@B-RaDD]

algo

[@dioriosigns2446]

LOL out of stock n52

[@snowj720]

Thanks Jeff. I was on the fence and leaning toward being fiscally responsible. Then I watched this. Order is in. You suck😘

[@TheFloatLife]

Sorry, not sorry

[@chewypinecone]

5:40 @TheFloatLife then do something about it 😏

[@agl10]

MTE is awesome but hooooly is it expensive. Especially if you factor in the tire you need to buy because anything we have at home doesn't fit. Edit: Great deal for US. Not for EU or Canada :(

[@froggerc625]

Why not Canada? They ship up to here...

[@DurtyBirdCmedia]

YOU CAN CHANGE YO RIMS?!

[@TheFloatLife]

Dang skippy you can

[@Cloud1202]

But it's not open source :c

[@auden_builds]

cease

[@TheFloatLife]

@@auden_builds desist

[@RIDE-o-REBELLION-o-FLOATCAST]

first!

[@TheFloatLife]

Too quick!

[@RIDE-o-REBELLION-o-FLOATCAST]

@@TheFloatLifelast weeks Nico/cowboy episode got us feeling like being ‘quick on the draw’!

[@TimsTown]

MTE bundles already gone for the GTS? Wow that was fast! @thefloatlife Sad, let me know when you get them back in. That deal is sweet and I want to grab one if you plan on restocking?

[@jaefrmbk2k]

far as I see currently, only the n52's are unavailable

[@TimsTown]

The vid said n52s are what is in the GTS now more or less so that is what I was trying to order. 😊