THIS is why ACS Composite makes the BEST front splitter for YOUR C8 Corvette!

[@HorsePowerObsessed]

What do you guys think of the new splitter? Grab yourself one from my website and help support the channel! bit.ly/3mmGMo0 👍👍

[@HorsePowerObsessed]

Yes sir! 19whp.👍👍

[@HorsePowerObsessed]

You definitely should!

[@bill12run]

Your neighbors love you and Horsepower Obsessed! The Corvettes are beautiful!

[@HorsePowerObsessed]

Thank you, my friend!

[@FrontSeatDriver]

ACS is honestly some of the absolute best products. Quality Control is very important.

[@HorsePowerObsessed]

Absolutely correct!

[@ProtectiveDadPranks]

Nobody can beat the quality of ACS Composite!

[@HorsePowerObsessed]

Agreed! Great stuff!

[@bluevette2230]

Good day Justin; the splitter just adds to the automotive beauty, that your C8 is; take care !

[@HorsePowerObsessed]

Thanks, man! I appreciate the love!

[@twoweeledsoto6072]

I bought the ACS splash guards. Not cheap, but damn good quality. I found their customer service is REALLY IMPRESSIVE. I had a few questions regarding my install, and ACS is quick to respond, multiple times. Definitely worth it to me! If ACS is listening, don't lose your fantastic customer service.

[@HorsePowerObsessed]

This is been my experience every single time!

[@nobark1]

Have you considered use Scrape Armor under the splitter? ACS sells those also.

[@jaimeramirez-perez7198]

That splitter looks sick bro also is there any other benefits when putting a front splitter besides the looks and rock chip protection?

[@HorsePowerObsessed]

It adds downforce.

[@jaimeramirez-perez7198]

@@HorsePowerObsessed oh ok👍

[@TruckCentral]

Looks 🔥🔥🔥

[@HorsePowerObsessed]

Thank you, my friend!

[@DrewFu319]

Hey Justin - two quick questions: • Three months later, how is it holding up? • Is the scrape “risk” significantly higher than the slightly smaller Z51 splitter? Thanks in advance!

[@HorsePowerObsessed]

It's still like new! I don't notice any difference between it and the stock z51 splitter in terms of scraping risk.

[@FrontSeatDriver]

That thumbnail is 🔥

[@HorsePowerObsessed]

Thanks, man!

[@TruckCentral]

@Front Seat Driver Promise I didn’t see your comment before I commented 😂 guess great minds think alike 👊

[@FrontSeatDriver]

@@TruckCentral lol. Exactly!!

[@marcg1964]

Expecting my ACS carbon flash rocker extensions in next week or two. You are not putting ppf over new splitter? Never mind. Should have waited for later in video.

[@HorsePowerObsessed]

👍👍 I try to XPEL everything.

[@rickcorrea891]

Hey I love your videos where did you get the tent for your tail lights?

[@HorsePowerObsessed]

I got mine from here: www.rpidesigns.com/shop/item.aspx/c8-corvette-molded-acrylic-tail-light-blackouts-lens-package/

[@rickcorrea891]

Are they pretty easy to install? What about the water and such when you wash them does water get inside your tail lights? Thank you

[@rickcorrea891]

?let me know please?

[@HorsePowerObsessed]

Super easy to install and water dries out so you can’t see it. I have a set on my ZR1 that I’ve had on there for almost 3 years now without issue.

[@SAVAGE8]

Justin your Vette needs the High Wing go for it. Trust me you won’t be disappointed. The front splitter side skirts and the high wing it’s a perfect match

[@HorsePowerObsessed]

I may or may not have it sitting in my garage 🤫

[@SAVAGE8]

Justin how’s the side skirts holding, you said you didn’t drill the hole, how’s the double sided tape holding does it get loose

[@HorsePowerObsessed]

Ideally you want to drill the hole. I didn't because I knew ACS composite will be coming out with theirs soon and it's very likely to be better quality and the one that I'll be sticking with permanently.

[@TheDtown66]

@@HorsePowerObsessed will ACS have the singlet on their side skirt? If so, won't drilling be required as well? I'm hearing they should be released within a month or so. What's the turn around time on the front splitter?

[@TheDtown66]

Winglet***

[@dbrooks05]

Did you put Xpel/ceramic coat on the one from Pat? I’m really considering it for the customization

[@HorsePowerObsessed]

I did not XPEL the one from Pat but if I would have kept it on I would have. These splitters take a beating on the front of the C8's so I would highly recommend some XPEL to keep them looking nice.

[@astoundu]

Now that you own both C8 & ZR1 which is better, faster , handling? Should I wait for a ZO6 or purchase a C8 now? Philip

[@HorsePowerObsessed]

The ZR1 is better in every way but it should be, it's a higher performance car. With that said, the C8 is not very far behind and that speaks volumes due to the fact that it's the base model. The C8 Z06 and C8 ZR1 are going to be insane performing cars!

[@fredschultz8267]

Yeah just what I was thinking the whole time, they look identical....... Great that once you start dragging it it is same color through and through.

[@shaneswift]

Justin Im looking at both the ACS 1Vm and one from Pat as well. I just watched both your videos on the two of them and it almost looks like the one from Pat isn't as flat of a suface? looks like it has some wave in the lay of the fiberglas ? Pats does look in the video to have a better finish on it as for the clean but can't really tell. What's your thoughts on this? Thanks Shane Swift Detailing LLC

[@vip_supercars3652]

Any carbon fiber front splitter options??

[@kurtthomas1687]

C7 carbon in CA, has carbon fiber. I have a carbon flash painted one on mine, and have a friend that bought the carbon fiber from them, very happy with both.. I think the ACS one is the best quality cause of flexibility, but I am happy with mine. Took a long time to come only down side. Hope that helps.

[@vip_supercars3652]

@@kurtthomas1687 thanks, I was looking at getting C7 carbons splitter.

[@dsmdriver2588]

Just received my ACS splitter a couple days ago. Can't wait to install

[@HorsePowerObsessed]

It's without a doubt the best designed piece I've seen! You're going to love what it does to the front end of the c8!

[@dsmdriver2588]

@@HorsePowerObsessed good to hear!

[@cobusvandernest1847]

I must say, the best look by far splitter on a C8.

[@HorsePowerObsessed]

Agreed!

[@keithschoeppler9866]

What specifically didn’t you like about Pats from American Hydrocarbon? To me it looks better

[@HorsePowerObsessed]

It's not that I didn't like it. It's a great option for customizability but it's fiberglass meaning it's more likely to break or chip than the more plastic material ACS is using. The lip gets pretty beat up on the C8 so this is a bigger deal than you may think.

[@Therealvijayjay]

I actually went with the AGMotorSports 5VM splitter and side skirts last month and am still waiting to get them. Do you also happen to have those as well? If you do, did you have any issues with them?

[@HorsePowerObsessed]

I do not have theirs. I hope you have better luck than I did with my side skirts. Waiting for ACS to bring those out so I can get good quality ones without spending 5k on them.

[@Therealvijayjay]

@@HorsePowerObsessed I found them from Midenginecorvetteforum.com. What happened to your sideskirts?

[@Vetteman372]

I've got a question. I thought you owned a blackout tinting in PA and partners in the Florida one

[@HorsePowerObsessed]

No. I am co-owner of the Florida location only.

[@Vetteman372]

@@HorsePowerObsessed Ok Thanks for your reply

[@HorsePowerObsessed]

You’re welcome

[@superchief15]

A splitter on a street car is just good for bumping parking blocks! The highest legal speed for the street is 80 MPH, In Europe the Autobahn has a speed limit the makes a splitter do it’s job but on cobble stones wide tires don’t light my fire!

[@HorsePowerObsessed]

It also looks a million times better. 🤷‍♂️

[@XxStoneKillerxX]

Is it possible to paint the OEM Rocker panel extensions carbon flash metallic? And if so would blackout tinting do that? I would want it to match carbon flash splitter from ACS

[@HorsePowerObsessed]

Not paint, but there is a vinyl wrap that is basically the same color. They could do that for you.

[@ProtectiveDadPranks]

I just love that everyone one of Your, Mine, and Front Seat Driver get 2 thumbs down almost immediately. Yet those two Dumb Sheets don’t realize we KNOW exactly what 2 KZbinrs are doing it!

[@HorsePowerObsessed]

Exactly! We aren't dumb, it's quite obvious but they think they're smart 🥴

[@Jesusprayerwarriorbw]

Cany wait for the Grand Sport, Z06 ZR1 & Zora

[@HorsePowerObsessed]

I agree!

[@BlackoutTinting]

No sliplo?

[@HorsePowerObsessed]

It's hollow underneath so there's no way to add it unfortunately.

[@BlackoutTinting]

@@HorsePowerObsessed do you doubt our abilities?

[@ivanmarrero28]

Freaking Sweet!!! Very Nice 👍

[@HorsePowerObsessed]

Thank you!

[@anthonybarnette5138]

Does a non Z 51 CAR come pre drilled in the front trim? What is the process for non drilled ?

[@HorsePowerObsessed]

Yes sir. The screws are already there.

[@sneaker_problemz931]

How much do they charging for xpel the all C8 corvette? Also the information on the shop .

[@HorsePowerObsessed]

The shop is Blackout Tinting in latrobe, PA. It's hands down the best shop I've ever been to. Give them a call at [phone]

[@sneaker_problemz931]

@@HorsePowerObsessed thanks

[@rudysilva816]

Since you have 4 different splitters you should give away the ones your not using ... I could use one on mine

[@HorsePowerObsessed]

I might just do that!

[@kurtthomas1687]

Agreed, that ACS one is clearly the best one, as far as factory goes, that splitter that comes on a C8 Z51 is pathetic, GM should be ashamed to put that 3 pc plastic crap on a car of that caliber. I have a 2018 ZL1 Camaro and it came with a very nice carbon flash painted splitter, and that car cost 20k less. It has been great for aftermarket, they must be selling a bunch of splitters. Nice video, keep up the good work.

[@HorsePowerObsessed]

Thank you!

[@danmcsweeney3396]

Justin, will Blackout Tinting be at the car show this weekend?

[@HorsePowerObsessed]

Yes they will!

[@danmcsweeney3396]

@@HorsePowerObsessed Nice! I'll see both of you there!!

[@HorsePowerObsessed]

Can't wait, man! Both my cars will be there. 😎👍

[@superameric8]

I bought a front splitter and side ground effects for my c8 from C7 carbon and it didn't even fit. They are horrible. Atleast that was my experience.

[@HorsePowerObsessed]

Yeah I've had a few that were not great. You can always count on ACS to fix that though

[@kurtthomas1687]

Wow, sorry to hear that, my experience with them was fine. However I do think the ACS Is likely the best.

[@superameric8]

@@kurtthomas1687 my dealer couldn't even mount the side ground effects or front splitter. It didn't fit up. $1700 bucks down the tube. C7 told me to f-off they won't take it back.

[@karateman1286]

Thats looks better

[@HorsePowerObsessed]

Thank you!

[@danmcsweeney3396]

Justin, Yesterday you said You and Blackout will be at the World of Wheels this weekend. Another question, will ACS be there?

[@HorsePowerObsessed]

ACS will not be there, unfortunately. They will, however, be at Corvettes at Carlisle this year!

[@danmcsweeney3396]

@@HorsePowerObsessed Thanks. Carlisle is too far for me, not looking to put those miles on the C8. Probably see you Sunday, how late are you there Sunday?

[@HorsePowerObsessed]

I'll be there until close which is 6pm Sunday night.

[@danmcsweeney3396]

@@HorsePowerObsessed 👍👍

[@TheOmarbravo9]

We want zr2 content

[@HorsePowerObsessed]

Coming soon!

[@kirkendicott5521]

You have to be over your head in debt.

[@HorsePowerObsessed]

No sir. I've worked hard to get where I'm at.