Love the longer videos mate , I could watch u work all day ! Love how u do things properly 👍
@jonowen84795 жыл бұрын
Arron you explain your video's great mate, I can't believe you haven't got many more subscribers. Keep the videos coming mate.
@colintx8005 жыл бұрын
You do a brilliant job! I really enjoy your videos.
@degsy50005 жыл бұрын
Super clean engine bay...makes all that hard work worth it when you see the end result. Thanks for another top vid mate
@garethbell58745 жыл бұрын
Engine bay looks way better wire tucked love the attention you put into the small detailed areas aaron fantastic job as always 👍👍
@coledangelo5545 жыл бұрын
keep the videos long, we love them. obsessed garage videos are loooong like 40-50min dont worry about 20 mins being long mate longer the better tbh
@coledangelo5545 жыл бұрын
also any vids coming up of the fiesta rs
@andrewjones42855 жыл бұрын
Only just came across your channel! Just WOW. This Astra is amazing. Now I’m going to watch all your other vids!
@ashleyball11155 жыл бұрын
Mate I say it all the time but awesome videos!! The difference you’ve made to the engine bay is epic! 👌🏻 love the longer videos really gives us a good idea of what to do without boring us, literally could watch you work on cars all day 😎 we need stickers made to spread the word of your channel mate more people need to appreciate the work you do fella 👊🏻 take it easy my man 👍🏻
@Dynamic3DLtd4 жыл бұрын
Imagine being into cars and having this guy as your mate to do bits and bobs whenever it went wrong, with no worry about a bad job or getting ripped off!
@_Hangman5 жыл бұрын
Loved the video, you are so motivated when it comes to getting things done. Keep up the hard work.
@shaunwest36125 жыл бұрын
Brilliant video Aaron, loving the engine bay looks proper nice, really enjoy watching your videos, looking forward to the next 😀
@TheDJTENZOH5 жыл бұрын
engine bay looks great! nice work
@richardkerr14915 жыл бұрын
Absolutely amazing. Keep up the good work
@rob-1235 жыл бұрын
Great video dude, keep up the hard work.
@adfinch695 жыл бұрын
Best Astra G Iv ever seen. Wicked work Aaron your a LEG-END Waiting on you fitting some gas struts for your bonnet. 👍👍
@007tomcampbell65 жыл бұрын
Would of gone with a blue or black filter to keep with the theme but the build is great bow down to ya still waiting for you to do renault 5 gt turbo another iconic 80s brute
@peternufc815 жыл бұрын
Mate I cant wait to see your red astra in the same standard as this beast..lovely cars
@1pjodan5 жыл бұрын
I like the the new intro, tangle twisters are the thing to go for
@Sonorg15 жыл бұрын
Could watch these vids all day long, especially the Vauxhall ones :) hope one day you get a Mk3 Astra Gsi and drop a LET in it.!! Keep up the amazing content mate. Thank you :)
@spazda_mx55 жыл бұрын
Nice, looking forward to see this on track.
@cba3605 жыл бұрын
Can’t believe how good that wire tuck looks! Not going to try myself because I don’t have your skill or patience 😂 Had the fun of RAC taking my coupe turbo home today when the brake pipe burst just after mot brake tester! It’s gone at the point it drops down and under the chassis rail by the looks, going to look into the copper nickel brake pipes and see if I can do the full pipe or just add in a union part way
@E83-b8e5 жыл бұрын
Get in, I claim the fame for the ice poles 👊👊🤣🤣🤣 Quality work as always fella, I'm spreading the UNKNOWN Gospel wherever I go 🔥🔥🔥
@aydenscott32595 жыл бұрын
Shut up, they are ice lollies
@E83-b8e5 жыл бұрын
@@aydenscott3259 Stroll on, back in the day they were called ice poles, or ice pops, fact.
@aydenscott32595 жыл бұрын
@@E83-b8e hahaha, I was bagging out Aaron Unknown haha
@E83-b8e5 жыл бұрын
@@aydenscott3259 🤣🤣🤣🤣 Mate shit like this causes wars, glad we've averted it 🤣🤣😎😎👊👊
@daniellove6645 жыл бұрын
Brilliant works as always and love your OCD lol
@hassannaqvi45125 жыл бұрын
Badass m8 as per usual 😉
@scottsvxr5 жыл бұрын
Time to make Aaron>unknown> Aaron>Known.....
@massivecoh12475 жыл бұрын
Awesome videos mate, making me want to buy a Vauxhall again 🤪
@AaronUnknownPerformance5 жыл бұрын
Stubix Cube DOIT!
@shadymathers15 жыл бұрын
You know what they say,"you can always tell how tidy a house/person is by the state of their car". I bet i can check your house with a pair of white gloves and they'll end up spotless!
@teameliteuk20235 жыл бұрын
Will definitely have to send a project your way in the near future, if you do projects for other people that is 👍
@dexty39565 жыл бұрын
Need more Astra g videos wicked car 🤘
@damienv19995 жыл бұрын
That engine bay is nice and clean, now do the same to the zafira
@RallyandTrail5 жыл бұрын
You make edd china look like a novice 💪🏻
@sr71blackbirddr5 жыл бұрын
Looking clean under that bonnet m8 that header tank relocation will look the nuts. Shame that airfilter couldn't get out below the drivers headlight 🤔
@AaronUnknownPerformance5 жыл бұрын
I agree! It would only be possible with a different compressor housing. Maybe in the future
@b17blg5 жыл бұрын
Did the smaller springs on your coilovers come with the kit or is that something you've added on to keep the spring sat on the strut when you take the load off the car?
@richardderrick64385 жыл бұрын
That bay👌👌😎
@andymitchell3685 жыл бұрын
I can’t wait to see the new intake it will look the bees knees on a side note I don’t think I’ll ever open my bonnet again lolz
@matthewleadbeater68925 жыл бұрын
Did you say you had a 3.5bar fpr? Where did you get it from?
@scottsvxr5 жыл бұрын
Any advice on forging a Corsa VXR?
@danwilliams73885 жыл бұрын
Do you have a link for the air filter? Also looking at getting the aem dry flow but always thought the same, just looks to small
@G33.DEVELOPMENTS5 жыл бұрын
lovein the ice lolly reviews haha get yaself darn 2 lidl haha quality
@mattyhauxwell5 жыл бұрын
Hi I'm a recently new subscriber and I have been watching your videos iv just got a mk 4 sri turbo is there anything I should really keep an eye on also what kind of power would a stock angine handle comfortably?
@badboi1625 жыл бұрын
Hi mate can you please give me some advice on my z20let been trying to figure it out for months
@dave_listener5 жыл бұрын
what issues are you having?
@badboi1625 жыл бұрын
Nite Listener When windows stop working so does fuel pump Changed ignition switch and tried central locking module no fault codes something can stop working for days sometimes fine
@dave_listener5 жыл бұрын
@@badboi162 check the earth points on the drivers side, behind the kick panel
@badboi1625 жыл бұрын
Nite Listener Thank you so much for your advice mate Also the electric mirror’s stop working Also don’t always get the warning for low coolant etc replaced with gm part
@dave_listener5 жыл бұрын
@@badboi162 yeah where the bonnet release handle is..
@ljt715 жыл бұрын
Really wish you lived closer to me lol. I'd love to pay you to work on my Corsa Gsi :P
@jaywu1175 жыл бұрын
Car looks sweeet mate! 👍 Just wondering how much weight roughly you think you pulled out when you stripped interior?
@clarke895 жыл бұрын
U going south end cruise tonight bro ?
@kanehayes63405 жыл бұрын
Hi looking for some advice took car for a compression test today 100 all they across what’s the best kit to buy for piston ring to be done any help would be very much appreciated thanks
@richardgrubbe10134 жыл бұрын
Legend mate need your details got vxr zafira comeing soon need someone who knows the know if possible
@ryanlear13315 жыл бұрын
You going to do this much work on the GSI man?
@evo331305 жыл бұрын
Rear suspension kit , name ?
@jaywu1175 жыл бұрын
Z22SE wish it was a LET tho! 😭
@Soulvex5 жыл бұрын
Hold the big tub sideways and it will be a much better pour.
@DasArab5 жыл бұрын
I think(not 100%sure though) that the reason for clear brake fluid is so that you can see when its Dirty and well passed time for being renewed. Dirty brake fluid is an MOT Major fail now.
@Shadowmosesarea515 жыл бұрын
Love it mate , do you prefer 17” or 18” wheels?
@AaronUnknownPerformance5 жыл бұрын
17s are best all round handing/weight. Some 18s look good for showcars
@drewsearle9405 жыл бұрын
Where you from bruv
@easyerc22265 жыл бұрын
get a maf weld on boss from darkside, i did this for my focus and made my own inlet, just gets rid of the shit maf housing
@AaronUnknownPerformance5 жыл бұрын
I cant find 80mm stainless bends anywhere
@mrsilver72465 жыл бұрын
Go an azza 👍
@stevehenke6785 жыл бұрын
It's all that wiring you've cut out pal, who'd have thought it would fuck the stance up haha.