This Pedal will change your RC-500 forever!

[@RafaelUnplugged]

I'm a pretty advanced rc500 looper and wow this changes the game haha I've been looking for midi controllers but do like to stick to boss. Thanks a bunch

[@RafaelUnplugged]

You on Spotify?

[@JohnPaulMusicUK]

Certainly am. spotify.link/RQ2BfTOQFyb

[@rovenordiales]

All start stop and clear all can be 1 button on a midi footswitch. Short press = all start and stop (all start message) Long press = clear all (clear track 1 + clear track 2 message)

[@JohnPaulMusicUK]

That’s a great idea 💡 Love it! 👍🏻

[@robertiddon9270]

OMG 😱😱 my mind is blown 🤯it's going to take me ages to get this 😄

[@JohnPaulMusicUK]

That’s okay. I have breakdowns on the FS1WL. Here you go: Video 1: kzbin.info/www/bejne/eWTaq4uNYsSagc0si=UqUn8utFVeL2fJpg Video 2: kzbin.info/www/bejne/aaOUlIeXjqqqbZYsi=yc_UlCEKSSCiIDne Video 3: kzbin.info/www/bejne/n2bZcpWQich5fLMsi=G3JxTxr-4ecEXgCy

[@Robin_0011]

Thank you for creating such a clear and straightforward video! It was exactly what I needed.

[@JohnPaulMusicUK]

Your more than welcome 🙏

[@flrn84791]

Other options for midi foot controllers: - blackstar midi live logic (6 buttons) - datalooper (12 buttons, extremely customizable)

[@BeachJazzMusic]

Great video. I use a Morningstar MC8 with my RC-500. It works great and I have my RC- 500 attached to a pedalboard on the other side of the room so I can use it by attaching a long midi cable to the MC8 with is under a desk. Really a great way to add extra functionality to the RC-500.

[@JohnPaulMusicUK]

That’s awesome. What extra functions are you asking from the MC8 and have you changed the original 3 buttons on the RC-500 to something else or kept it as factory?

[@BeachJazzMusic]

@@JohnPaulMusicUK I have the RC-500 on a pedalboard that I built to play solo guitar gigs. I made the pedalboard right before medical problems forced me to retire from playing out. Now I use it when I practice in the house but the pedalboard won't fit under my desk that I have my computer on but with the MC8 I was able to easily fit that under the desk and it takes the place of the buttons on the RC-500. I use the MC8 to control the RC-500, my Quad Cortex and Mac all at the same time. My needs are very simple as far as the RC-500 is concerned. I'll play chords with a walking bass line into the RC-500 using the pitch shifting capabilities of the Quad (which so far is the best I've heard of all the modelers, they really nailed that effect.) In that way it sounds like I have a bass player and then I solo over it. I use the MC8 to control KZbin and other music programs as it also has the ability to control keystrokes. Really amazing.

[@markdouglas8073]

Brilliant. I’ll be doing the same with my Boss RC-10R.

[@JohnPaulMusicUK]

Certainly 👍🏻

[@lorenzledesma7237]

Hey there, thinking of doing this with my rc10r too. Did you get around to making it work?

[@markdouglas8073]

I’m using a Hotone Ampero Control (MIDI foot control with 4 footswitches) for my looper.

[@JohnPaulMusicUK]

@markdouglas8073 nice. 👍 working all well?

[@adamkerrivan2125]

I would love to see you pair an AirStep with the RC-500. I struggle with the MIDI.

[@JohnPaulMusicUK]

I’ve asked Air step to get involved. Waiting..

[@fasteddie8782]

This is so cool...thanks for your time

[@JohnPaulMusicUK]

Welcome 🙏 Watch this one next - kzbin.info/www/bejne/n2bZcpWQich5fLMsi=_G0ZDKVEQ9xjKBz7

[@MattyRouter]

May aswell buy the 600,but pretty cool 👍👏👏

[@JohnPaulMusicUK]

If your in the market for a new looper and looking at both, you are right now cause of the price but if you’ve had an rc-500 for a while and just want more functionality, this is a solid upgrade.

[@SamWoolleysings81]

thank you your videos help me out alot! please could u do a video about which pedals are best quality for low prices and how to set up for the boss rc600, thanks.

[@JohnPaulMusicUK]

Great suggestion! What kind of pedals? Do you mean extenders like the FS-6 kind and alternatives?

[@bvrbvs]

Really like the fs-1-wl just wish there was a way to programmatically change banks (snapshots) so that the function of each of the three pedals changes dynamically based on which track I am without opening my phone.

[@JohnPaulMusicUK]

Now THAT is a cool idea! Future request that!

[@robertjenner2393]

thanks for the info..can you clarify when you are assigning functions what is the step to confirm choice as your demonstrating without informing what your pressing to do so.. thanks

[@JohnPaulMusicUK]

Once you have set it, you back out and write it to the memory. 👍🏻 that will set it and confirmed and will stay like that.

[@robertjenner2393]

Thats great thanks for your promp reply....😄

[@CMEPro]

Great and clear video ❤

[@JohnPaulMusicUK]

Glad it was helpful!

[@andresdagrava5971]

Is there any way to set one of the pedals as “play track 1” to sync porpouses

[@JohnPaulMusicUK]

Yes. 👍🏻 probably an assign but that would just be a CC number and then triggered by one of the buttons. 👍🏻

[@icebob8555]

Thank you great video

[@JohnPaulMusicUK]

Very welcome

[@michael_caz_nyc]

Question off-topic: Is there a way to Control the "Drum Volume" when creating a New-Loop on the RC-5 (without blowing your speakers)? You really dig-deep and showcase all functionality with regard to these pedals. Always enjoy your informative content.

[@JohnPaulMusicUK]

Hi Michael- so my answer to this is create a blank ‘template’ with things like buttons and volume and routing the way you like it and save it to memory 1. Then when you make a new loop on memory 1 and like to save that, save it to a different memory. Then when you go back to memory 1, it will be back to the way you like it with a blank track ready for your next creation. Hope that makes sense. 👍🏻

[@michael_caz_nyc]

@@JohnPaulMusicUK Thanks. Yes, I see what you mean. Once I have my settings, do all my creativity in memory #1 and save it to another location & come back to memory #1 for next project. Appreciate it. You really are amazing with this stuff !!!

[@JohnPaulMusicUK]

@@michael_caz_nyc I’m now making a little video about this.

[@michael_caz_nyc]

@@JohnPaulMusicUK Good move, because "EVERYONE" who has it seems to have the same complaint ( in an otherwise fantastic unit ) = No Global Volume (and the drums are Blasting) Thanks my friend. You really are Forensic with Dissecting these Looper's.

[@RosalvoParadella]

O chocolate midi controller tem 4 botões. E também é wireless (combinado com o MidiB@) Acho a melhor opção para expandir o controle do RC500. Funciona perfeitamente.

[@JohnPaulMusicUK]

I’ve heard about the chocolate pedal. I need to look into this. 👍🏻 😊

[@RosalvoParadella]

@@JohnPaulMusicUK vale a pena demais amigo. E ainda é o melhor custo beneficio. E com o app Cube Suite vc poderá configura-lo ao seu modo.

[@martinklapheck]

is it possible to change a patter in memory with the footbswitcher?

[@JohnPaulMusicUK]

As in a rhythm pattern? Yes. You could, you could make a cheeky little change from one memory to another in time and have a different rhythm on a different memory. You can also change the parts in one rhythm.

[@deanwells501]

This is a great video. I think I'm going to try this. Is the Widi jack cables 3.5mm?

[@JohnPaulMusicUK]

So the WIDI Jack ports are 2.5mm but you can buy it in different configurations.. so you can get it with 2.5mm - 3.5mm cables, 2.5mm - 6.35mm cables or 2.5 to 5-pin (traditional) midi cables. Make sure you pick the right one either on Amazon or through CME Pro’s website. 👌

[@deanwells501]

@@JohnPaulMusicUK I got everything via Amazon. It all arrived last week. Going to start fooling with it today. Very excited. Love you videos!!!

[@gregcutler6135]

Great video! does the RC-500 allow tap tempo for playback via the external footswitches? If so will it timestretch properly. Thanks in advance!

[@JohnPaulMusicUK]

In short yes. The RC-500 allows you to tap tempo either from changing one of the buttons or an external control, or midi, via adding it as an assign. The time stretch does its best but people have reported a warbling sound if you time stretch to a slower beat and it’s significantly slower. Hope that helps.

[@ricardofolhento]

Hi! Great video and explanation! I have Does the Stop button have an effect of fading? Thank you!

[@JohnPaulMusicUK]

Certainly does! Have a look here: kzbin.info/www/bejne/jqXCiYZ5mZl2irMsi=YIHmP02kADuGJMTc

[@ricardofolhento]

@@JohnPaulMusicUK Thanks a lot!!!! 😃

[@JohnPaulMusicUK]

More than welcome 🙏 Here is the playlist of all my RC-5 / RC-500 video so far: kzbin.info/aero/PLO36LpORUSaa2hQEKtoW-FyuhOBCwlfRs&si=SIHH80HpoZbl5AkH

[@nicholasbarton4215]

Is it possible to make the RC 500 into a four-track looper with an external footswitch? I have a Boss FS 5U.

[@JohnPaulMusicUK]

Sort of… but only by using the undo / redo function. You would still have to think about where loops are in the chain. But you could have a loop with an overdub and then remove that overdub with a second button and repeat that process for the second track. 👍🏻

[@schwarzroemer]

thank you for your excellent videos. After watching several videos I decided to buy the boss rc 500. I also bought the widi jack to connect my Airturn BT500S-4 . I thought that should work to connect to the looper via widi jack. So I would have 4 extra foot switches. Now I must find out it does not work or I am simple not able to set it up proberly. Could you please send me s short reply whether this setup could work? if I know it should work, I would try again. Otherwise I have to give up. Thanks from Germany, Juergen

[@JohnPaulMusicUK]

more than welcome. I dont own an AirTurn BT500S-4 personally but I do know that they are shipped by default to by keystroke. you need to change it over to MIDI mode so you can send CC numbers over to the WIDI Jack. Ive found the official video for you from Airturn where they acyully pair it up to a WIDI Jack. Watch this first (only about 1m video): kzbin.info/www/bejne/b5axiJ95arhreqMsi=cCQWO4QiJ845HOb2 Then once that is done, you need to set MIDI assigns on the RC-500 based upon what button is which midi command and what you want it to do. Watch this next (its a bit fast as I was making a joke out of KZbin shorts.. hope it helps): kzbin.infog1-3-73Y82o?si=QxuqyAY_DqfMLOEK

[@schwarzroemer]

@@JohnPaulMusicUK dear John, thanks to your help I was able to connect the RC 500 with the airturn via widi jack. But I have now spend hours and hours to configure the RC500 to listen to the Midi commands of the Airturn. I think I have setup everything correctly like channel, midi, etc. i have no idea why it does not work. Is there a way to send you a vjdeo and share with with you some more information? please let me know. thanks.

[@michaelkupfer3723]

Great content, just discovered and subscribed! 😊 Heres a question I BET you never heard before! Can the volume faders on the left side of this pedal be turned to PAN (left/right) faders? Because: I can totally change the volume of my guitar signal with its volume knob, but to change the pan of a riff on the fly (without diving into the menu of the RC-500) I guess I would need a small mixer or something before the RC-500. UNLESS of course theres someway to pan the signal on the fly on the pedal itself. Would really like to explore looping and using the stereo spectrum.

[@JohnPaulMusicUK]

Hi Michael 👋 welcome to the loop squad! 😊 So your pan question, the answer is both yes and annoyingly no. Let me explain. The RC-500 has 8 assigns and one of the source controls is the volume sliders. So you can assign pan to one or both of them (that’s the yes part) BUT - that doesn’t override the fact that they are still volume sliders and will still control,the volume as well 🙄 The best way might be an external expression pedal and use 2 assigns, both to the same pedal for panning. Might make a video about this - watch this space.

[@michaelkupfer3723]

@@JohnPaulMusicUK Hey Paul thanks for the fast response!! That's a great idea with the EXP. Pedal actually! My RC-500 is on the way (together with a Hotone Ampero Control, am curious if those two are compatible). And I actually DO have an unused exp. Pedal here, which I could connect to the Ampero (it has two inputs for external pedals). Will definitely try that out! Thanks again!

[@jamescorbett3039]

Can you use a midi cable instead of the Bluetooth option?

[@JohnPaulMusicUK]

Certainly can. The FS-1-WL has a TRS midi out and the RC-500 has TRS midi in/out ports. So just need an AUX TRS cable. 👍🏻

[@jimbreslin1972]

Hi John. Love your videos. I have bought the FS-1-WL and managed to get it working with a Wi-Fi jack. Do I have to do the assign settings for every patch or is there a global option.

[@JohnPaulMusicUK]

Nice one! You have to do it with every patch.. but there is another way! Have a look at this and flip your thinking about every patch you have: kzbin.info/www/bejne/gXTIfXengtKAjs0si=I13H07_WpjlZ1nXv

[@SamanthaKristoferson]

"Handy!" :)

[@JohnPaulMusicUK]

Very! kzbin.info/www/bejne/eWTaq4uNYsSagc0

[@ballestero8785]

Hi JP, thanks for the tip! Who would you recommend this to over buying the 600 for more or less the same money as the 500 plus switches? Cheers

[@JohnPaulMusicUK]

If you have neither, then go with the 600 as you have more tracks, more buttons, more options. HOWEVER.. my only curveball with that is if you are never going to need more than 2 tracks then get the 500. I like to split up my loops and have more control.. hence the 600/505mkii

[@victorjanssen]

Hello John, great video and explanation. After doing everything you explained so clearly, I think I am missing something. I am using the fs-1-with a midi cable connected to the rc-500, am I right to assume that there is no way to make the midi assignments for all 99 tracks at the same time? That would mean that you have to be aware not to overwrite (or delete) the track with settings…. I could copy the track contains the settings to all tracks but than, containing data, the track would be showing white on the rc-500, as if a recording is stored. Correct? Kind regards, Victor

[@JohnPaulMusicUK]

You are correct Victor. Have a look at this as an alternative for Memory management. kzbin.info/www/bejne/gXTIfXengtKAjs0si=vjC1OEb8JyLFt6ei

[@Jurgenjurgensenmusic]

Very informative. Could I asign different effects on different buttons

[@JohnPaulMusicUK]

Yes you can! Just need to use assigns. 👍🏻

[@Jurgenjurgensenmusic]

@@JohnPaulMusicUK cool. Is that also possible with a 2 button pedal in the expression input? I just went busking with the rc 500 for the first time today. Amazing🤘🤘🤘

[@bassmonk2920]

How can you fade out one loop and start another...thanks

[@johnemerson2876]

Very informative and concise video, Just bought a Boss BR 500 on the back of your videos. My goal is to a ONE click midi system , change patches on my Korg Keyboard/ Guitar Pedals / and now the BR 500. Very help full video , just a thought is possible to LOCK tracks or loops on Boss BR 500 ? Thanks

[@JohnPaulMusicUK]

Intake it you mean RC instead of BR? When you mean lock tracks/loops, you can save them to the 99 memories and then recall them instantly. So you could have each memory as a song with the loops saved within. 👍🏻 Yeah the RC-500 also has TRS midi so you should be able to do memory up and down to change the memories via midi. 👍🏻

[@johnemerson2876]

@@JohnPaulMusicUK Thanks for your reply , sorry I meant when you save to Boss RC 500 memory location .Can you lock that loop so it can't be accidentally recorded over? thanks John

[@JohnPaulMusicUK]

That’s a great shout. You can only overdub and then as long as you don’t save that, it will revert back to the previous saved state.

[@barnchaz]

Hey John, great video. Do know if there is a way to use the tap tempo feature via pedal rather than a knob so I can change the tempo of the loop live? Is this something I can only do on the RC600 or is it also doable on the RC500? Thanks for the advice. I am trying to figure out which looper to buy and tempo tap is an important feature. Also looking at midi controllers that would do the same thing if there is one you can recommend. Thanks

[@JohnPaulMusicUK]

Hey you should have joined us for the last live stream. All about the 500. Yes you can change the buttons or add more and some of the options are tempo. 👍🏻 Have a watch: kzbin.infonrLOS7bIBUE?si=Ftc2uBZet9Fmdwwg

[@andyjm7122]

Great video John. Is it possible to assign two parameters to one switch? For example, stop track 1 AND stop drums with a press of just one switch?

[@JohnPaulMusicUK]

Yes. The way you would do this is with an assign. So you would do stop track 1 as an assign with the midi CC number (for example CC80) and then stop drums would be a second assign with the same CC number. 👍🏻

[@andyjm7122]

@@JohnPaulMusicUK Amazing thanks!

[@juanfernandez4821]

Hi Paul, great video & very clear, one question, which plug in Midi controller would you recommend? I'm a bit old school & like everything plugged in don't like using wireless

[@JohnPaulMusicUK]

That’s fair enough. Pedalwise I would look at the Morningstar Pedals. They are the easiest to program and the most versatile. Have a look here: kzbin.info/www/bejne/bIuYmJeZg9p7l80si=mZUTPejQDJFrK86a

[@juanfernandez4821]

@@JohnPaulMusicUK wow! Yes I see wot you mean, a bit rich for my wallet I'm afraid, the Boss one in your video is much more economical even though I'm not into the blue tooth idea may still have to look into it, thanks for the advice thou, that Morningstar is spectacular have to say

[@acegitaar]

Hi mate, question: what is the use for an extra track 2??? With only 1 track is enough or????

[@JohnPaulMusicUK]

Having more than one track is so you can control different aspects of the loops.. different loops and different volume control. Think of it like a mixer. So I’m track one I could have a beatbox or rhythm and track 2 can be the chords. I can stop them independently to keep the looping dynamic. Or maybe track 1 is your chords and track 2 is vocal harmonies just for a chorus. So you can turn them on only in the chorus. Hope that makes sense. 👍🏻

[@acegitaar]

@@JohnPaulMusicUK Thank you so much JohnPaul!!! Very clear explanation bro, now I understand, have a nice day. Ur great! 🙏🙏🙋🏽‍♂️

[@andyjm7122]

Hi John, you’ve mentioned that the rc500 can have more than 8 assigns. Could you explain how to do this? As far as I can tell, there are only 8 with no way to have more yet. (Non including ctrl 1 & 2)

[@JohnPaulMusicUK]

I don’t think I mentioned more than 8. It only has 8 assigns.

[@mathewmathias8871]

Hi John .. great video, again. I’m trying to connect this to the RC600 with midi cable but no joy! Have you tried this? Hoping I’ve just missed a setting change in one of the machines but any input would be valuable! Even tested continuity of the cable to be sure…

[@przemyslaw1235]

This is great i really would like to buy boss rc 500 pedal but i have question🙂.Can i record a loop and switch on drum beats after so it follow loop tempo?because on my boss rc 10 its impossible😑I dont want to setup tempo myself i want drum follow the loop 😀like drumer start after guitarist.I would like to just play press loop and after press drum button when i want drums.Have a great day🤝

[@JohnPaulMusicUK]

Yes you can! You would need to either reprogram one of the three buttons.. or have an external like in the video.

[@przemyslaw1235]

@@JohnPaulMusicUK Thank you so much🙂🙂😀😀😀😀

[@JamesThomas-zl9er]

Can you have 1 fs6 on the fs1 AND another in the CTL port of the rc500?

[@aangtonio5570]

Does anyone know if this trick also works for the Boss RC-10R?

[@JohnPaulMusicUK]

According to page 9 & 10 of the parameter guide, it looks like there are midi messages for controlling the play and stop.. so yes 👍🏻

[@deanwells501]

I've been using the FS-1-WL for a month now with my RC-500. I find it to be unreliable at live gigs. It will randomly disconnect. And sometimes it will show that it's connected and the switches won't trigger the Midi commands, leaving me scrambling in the middle of a song to work around it, which is insanely annoying..

[@AndresLopez-eo5rr]

Would this work with the rc 5?

[@JohnPaulMusicUK]

Yes. There are some limitations with the RC-5 but you can do this yes.. except the 2nd track part obviously.

[@carlodeluca]

Does it work with VE-2?

[@JohnPaulMusicUK]

It will connect via midi or wireless which I don’t believe the ve-2 has. I don’t believe it will work with the usb on the ve-2 unless I’m mistaken.

[@alexandershammas]

Hi John, thanks for this video. I'm wondering if you have any knowledge about why certain targets cannot be assigned to the FS1-WL from the rc500? For example, I've noticed you cannot do a full track record/play/stop/clear on the FS1 like you can on the rc500, with record/play or play/stop only being available as separate options as an assigned target. I've also have noticed that track select is not an option for some reason. Am I missing something?

[@Robin_0011]

If I am not using Bluetooth, what cable do I need?

[@JohnPaulMusicUK]

Just a TRS cable. 👍🏻 the FS-1-WL has a midi out by TRS.

[@antoniokimble5286]

​@@JohnPaulMusicUK Would it be possible to utilize 2 FS-1's? The first two ways I thought of were not once I got down to it. It may not be possible to use 2 FS-1's, but you could technically use 2 FS-6/7's, one chained off the FS-1 and the other using Ctrl port. On the other hand, I also suppose it would be worth looking at the Morningstar 6 and 8 pedal midi at that point too. It all comes down to cost. You guys think that is possible and what are your thoughts?

[@RiverRoots]

I guess this works with the rc505 mk 2 aswell?

[@JohnPaulMusicUK]

Certainly does. 👍🏻

[@iamwoods_music]

Hi John, I was wanting to also sync my Beatbuddy to this pedal but I think they probably use the same input, is there any way to have the beatbuddy and the FS1 both connected to “midi-in”? Great video, cheers!

[@JohnPaulMusicUK]

There is still physical connections so you could use them with the beat buddy and then use Bluetooth with the RC-500. Worth looking into.

[@iamwoods_music]

@@JohnPaulMusicUK I’m not sure I understand, isn’t the Widi taking up the physical inputs? If it’s possible to have both the Beatbuddy and pedal extension connect to the RC500 that’d be awesome Thanks for the response

[@JohnPaulMusicUK]

So the Widi would go into the RC-500 and the BeatBuddy would physically connect to the FS-1-WL. The signal goes through to the RC-500 but I’m not sure what the delay would be like for midi clock. Would have to test it.

[@iamwoods_music]

@@JohnPaulMusicUK that’s a great idea! Hadn’t considered that, I’ll get researching, thanks again. Your channel has been a great help many times.

[@iamwoods_music]

@@JohnPaulMusicUK Hi John, Im looking at the inputs on the FS-1-WL and wondering where I would connect the BeatBuddy? It looks like it only has midi out, not midi in, so im wondering how i would sync the beatbuddy to the RC500 through the FS-1-WL? Thanks again

[@ProfessorPflaume]

Are you using an additional preamp for the mic or a mixer or something to boost the signal? Or is your mic’s signal strong enough to overcome the weak preamp of the RC500?

[@Mojokiss]

some day someone will make a proper looper

[@TheRealKirkHammett]

I wonder if anyone here knows how we can adjust the volume of the rhythm section when this pedal is placed in your effects loop? Even with my volume down low on my amp, if I turn on the Rhythm section, it BLARES out of my speakers.

[@JohnPaulMusicUK]

Click MEMORY then scroll across to RHYTHM. The first option is LEVEL. It’s set to 100 out of 200 and is certainly really loud imo. You can adjust it there and save that. Bear in mind that the rhythm volume is per memory and not system wide. You can assign an expression pedal to the rhythm volume to control it at your feet without bending down. 👍🏻

[@borgan1964]

i have a Line6 Helix and i want to control ex.songs 1 to 80 with my RC-500 ,,when i choose ex. song 49,,on the looper it will choose song/preset for that song? is this possible?

[@michaeltenzer4635]

I’m assuming this is just as valuable with the rc600? Also any tips of connecting rc500 and rc600 I’ve had issues…. Thank you! Great videos!

[@JohnPaulMusicUK]

Certainly. Wow you want to use the 500 & 600 together? Wondering why. Issues you will have is having one as a main and the other as a secondary for the clock and changing the settings for them to work with each other.

[@michaeltenzer4635]

Ha ya I figured get even more tracks ha. Wanted click track of 500 going out so I can use the drums on the 600 in addition to the click track. Getting uses though will the internal clock sync. Seems to work better with 500 being the master…Thank you for the response.

[@Grumpyoldtwit]

I’m about to buy one but not sure whether I need the 2.5 or 3.5 mm Jack option. My RC500 is still on the courier truck somewhere. [EDIT:] It took a bit but I finally found the information- it’s 3.5mm

[@JohnPaulMusicUK]

Yes. The new midi yes is 3.5mm which is good cause you can use aux cables. 👍🏻

[@MattyRouter]

Where's the rythym volume?

[@JohnPaulMusicUK]

It’s in the rhythm menu (hold down the Rhythm On/Off button for quick access) however you could control it with an external expression pedal.

[@basscubs]

Man every loop pedal video is more confusing than the next

[@JohnPaulMusicUK]

What loop pedal do you have? If you have the 500 then watch this playlist: kzbin.info/aero/PLO36LpORUSaa2hQEKtoW-FyuhOBCwlfRs&si=caRc6TcG6bdCeTxY

[@basscubs]

@@JohnPaulMusicUK 0 at the moment. Was leaning towards the Aeros loop studio. Currently I use Ableton live and push controller with foot switch, it's just a lot to carry around

[@sexton610]

Exactly! This comment rings truer than a new bell!

[@DJCJ999]

I’m agonising over which Loopstation to buy… just when you think a certain model will suit your needs you discover a limitation or something you know will annoy you… adding pedals has really opened up the functionality of this pedal but it’s more faff, makes me think that the 600 is the only real option.

[@JohnPaulMusicUK]

Sounds like you have made your choice. Going with a flagship means that ceiling of limitations is much higher.. and you might not use EVERYTHING but it means that it does everything for you. Question is.. RC-600 with a midi controller for volumes and more. Or the RC-505mkii with a foot controller? Do you need volume control? My hot take is - step back from the tech. Get a piece of paper and a pen in a quiet space a write down everything you think you need.. (how you want to split up your loops/ effects/ style of looping/ inputs/ outputs.. integrate it into your setup. Hope all this helps. I’m making a new course called Master The Basics, which is looping for beginners - get 25% off whilst it’s in production atm with the code STARTERKIT - www.johnpaulmusic.co.uk/offers/AZBUfDvw/checkout

[@DJCJ999]

@@JohnPaulMusicUK yeah the 600 is over kill for my needs totally but I don’t do compromise very well… tbh the older 300 looks perfect.. multi part with faders.. only thing it lacks is the better sound quality but 2nd prices are still quite high so for a “little” extra you can buy the latest…. I will try and hold out for a cheap 300 but if not I think I will get the 600. Thanks for the heads up on the course.

[@colincannings7946]

Hi, Iv'e watched a number of your videos and I can't remember in which video I think I hear this information. In the video, This Pedal will change your life. there's a lot of information. Did I hear you say in one of your video's, that there is a book, which explains and covers all the information, you talk about in this video?

[@JohnPaulMusicUK]

Hi Colin. Yes the book in question is the parameter guide. Have a look here: www.boss.info/global/support/by_product/rc-500/owners_manuals/02ee9ed9-fa87-43f5-b439-fa928187a3bb/ Here’s the playlist of all the videos I’ve done for both the RC-5 and RC-500 so far: kzbin.info/aero/PLO36LpORUSaa2hQEKtoW-FyuhOBCwlfRs&si=978NTH-yD0y6fbua I also now have a FULL RC-500 course here: www.johnpaulmusic.co.uk/offers/2HokeXzM/checkout

[@colincannings7946]

Thanks@@JohnPaulMusicUK

[@rayprevailer8454]

Full of bugs. I am returning mine. Yes it has the latest firmware. Settings keep changing back to the factory default settings. I have had it for a week. I was not expecting this from Boss. Many others are having the same issues. Just one example....I set Track 1 to come out of "A" and after a while it changes to ALL "A&B".

[@JohnPaulMusicUK]

oh.. thats such a shame. mine certainly isnt doing that. is that global settings?

[@rayprevailer8454]

Yes. For example, when I route rhythm to Out jack "A" and the guitar out to "B" It will not save the route. Another odd thing is I have it set up on my pedal board with a power strip to turn on everything with one switch. When I turn everything on the RC500 will not power up. I have to unplug then plug in the power cord then it turns on. Probably a bad batch. I returned it and have a RC-10 coming. I have a lot of Boss gear and have never had any issues at all.

[@armando534]

👍

[@JohnPaulMusicUK]

Glad you like 👍🏻

[@Amiga1200_Juicer]

why dont you just buy a rc600 ? because in my country this setups price is the same

[@JohnPaulMusicUK]

I agree it’s pricy but for those who have already bought the RC-500 this is a great expansion, however if you haven’t got a looper yet, for the price, you are correct.

[@Amiga1200_Juicer]

@@JohnPaulMusicUK Thanks bro helped alot

[@pattillo21]

Dammit. My wife’s gonna kill me if I need this pedal 😬

[@JohnPaulMusicUK]

😬 😬 😬 ‘No darling.. I’ve had this pedal for AAGGEESS!!’ 😉😏

[@pattillo21]

@@JohnPaulMusicUK 😂😂😂

[@bassbassbasser]

That setup is more expensive then a rc600...

[@JohnPaulMusicUK]

Yep. It is. But if you already have the rc500, it expands the functionality without getting a whole new looper. If you don’t have any, then yes I can see why this would be counterproductive. If you have that budget, get the 600. It’s got so much more to offer.

[@steveanstice]

Complete midi novice using RC500. Understand all the assigning but how on earth did you program the foot switch? Far too quick and you seem to assume that everybody understands the language. Want to use with trs cable, not wi-fi. Boss manual is, as usual, no real help. ☹️

[@JohnPaulMusicUK]

Hey Steve - I actually have a few videos on this. This one is how I set it up : kzbin.info/www/bejne/aaOUlIeXjqqqbZYsi=xYx_lAu_bUb28NyK

[@victorvicomusica]

Shit man, you really need to be clever these days

[@JohnPaulMusicUK]

Not clever, everything is learnable and depends on what you wanna do. If you have a system that works and is easy for you, then that’s your system and certainly don’t have to change just cause a new shiny thing came out.. unless that shiny thing helps your already awesome system and then, yeah.. your gonna have to learn it. 🤣 Keep creating. 👍🏻

[@victorvicomusica]

@@JohnPaulMusicUK on it 👌