THIS RC CAR SURPRISED EVERYONE! | Arrma Typhon TLR Tuned

[@nickmoe16]

Now you need to get the losi 8ight rtr and compare them and see which is the better rtr buggy

[@Havingoneofthosedays-]

Yesssss 👍

[@RcOffroad9513]

The Losi 8 rtr looks like hbbywing, and Spectrum came together to make the motor and esc that are in that car. Looks like what we all race every weekend, really. I think the Losi will have an edge on the Typhon. Get one, so we can find out MSM!

[@outabody381]

Picking up the losi 8xe tomorrow from my local hobby shop.

[@rockyfortenberry5845]

@@outabody381I ordered one and it should be at my lhs also tomorrow.

[@lyricofwise6894]

Do this

[@barryriffle8076]

no offence mark i realize money and prices are different from person to person dependant on income, but i am sure some of us dont think $150 dollar servo is affordable. love the channel love the vibes.

[@DaveKoko]

Thought it was just me… lol. If i spend 50 on a servo thats alot

[@FarmerFpv]

I have been racing my Typhon TLR roller with a Tekin system, Shift Servo, and JConcepts finisher body & wing for 3 years now at the Amain Hobbies Silver dollar raceway. I have had many podiums and two 2nd place wins. I have yet to podium 1st place place but with time I will. You can't tell it's a TLR Typon looking at it. One thing for sure is I have to practice a lot. With my Kyosho.MP10e TK12 Buggy is a lot easier to race and it is almost effortless compared to my Typon TLR. I only race it to prove I can do it and podium. It honestly taught me to be a better driver because I had to really drive as perfectly as possible to get fast lap times compared to my race-bred Kyosho.MP10e TK12 Buggy is more forgiving.

[@DaveKoko]

TLR for the win. Stay Podium my friend

[@fossfamilyrc8066]

Not a bad buggy honestly I like it! I'm a tekno guy myself I can't wait to get the new tekno I got the old 2.0 and I been rebuilding it the last few weeks bringing it back to its original state.i got it from a swap meet. It was kinda rough but now she's nice again! Love it! Tekno has changed my mind for sure!

[@fossfamilyrc8066]

Update I have upgraded it to mostly the 2.2 parts except the bulkheads and the abcd blocks and the -2mm hubs rub a little on the wheels but no biggie excellent buggy

[@yonicozac]

The steering plate was actually installed correctly from the factory, you only need to rotate it 180 to the "EXB" side if you use an EXB chassis brace which uses M4 screw. The hole on that side is bigger

[@noquarterschavez5415]

Mark. Great video and well explained. Thanks

[@troysrcchannel5659]

9/16 snap rings 2 of them will tighten up the savor nicely.

[@TpPartsRcXtreme]

They all say that..But imo this is the best Typhon they ever made.

[@karlp3840]

I really like how you explain setup. Please continue.

[@jasonmitchell8883]

I appreciate this video, I have the typhon TLR I put my own electronics in and want to be able to track it as well. Thanks

[@gregorymoreland2140]

I love theses videos! Race vs rtr!

[@GrandPitoVic]

How's it going Mark. I found your channel a few months back and I've been kind of Binge watching. I just pulled 2 of my Sportwerks Mayhems 1/8 buggies after 20 years. You know lol kids gone. Time to play lol. I pit them away in 04'. I have completely redone them with part 11 or 12 years ago when there were still crazy amount of parts available. I even found a brand new stock body in a box I completely forgot I had. I was on E-Bay and Google trying to find one. And I had one lol. Hmmm. It is the old style buggy body that is flat across the top. She is nitro. I have a Traxxas Bandit I bought in 01'. I just pulled that one out as well. I will be making her brushless like a VXL setup. But for now as a trial I ordered a brushed motor and ESC from Temu just to get her back up. I bought a JR crystaless remote back in 04'. I paid $300 for it. I used it for 2 months, put everything away lol. Can you recommend a remote that is not stupid expensive that comes with a receiver and is a 3 channel? I'm just trying to get back up cheap as I can for now. I have to buy a charger and batteries and, and , and lol. I enjoy your videos brother. I had a mini stroke a couple months ago. It didn't do much but it messed with my memory a little. Other that I'm great. I don't remember if you did recommend one in a video or not. Thank you sir.

[@austin515]

Boosta has a vid showing how to disassemble the servo saver. Search Arrma 6s servo saver. Add a washer or two to tighten it.

[@yonicozac]

What brands other than Tekno uses M4 shock stands? both my Mugen Associated and Kyosho uses M3 just like the Arrma

[@skyshade9106]

good video, sick of everyone saying you need to drop 1-2 grand on a race buggy to have a chance. No need this works just as good, Beginners probably won't even be able to the tell difference. IF you enjoy it and want to have a better experiecne, durability, and tuning to get it how you like upgrade to that tekno. Thats why i did, I love my tekno but my typhon was more then good enough for someone in their first, 2nd 3rd, or even someone thats been racing for a long time as a car. The tekno is just a luxury. Both cars are great but this is easily the better value. Great video. I bet with further tuning and practice you could get it even closer, plus they also have a roller option as you had in the last video where you could throw some used hobbywing electronics in there for about the same price as this as and be even faster then the rtr version.

[@johnmiller4553]

IMPRESSIVE 🤙🤙🤙🤙

[@boondock115]

Very nice! I love my TLR tuned Typhon!

[@unstoppable6047]

Thx for the info bro. I just bought one and waiting for it to show up. I'm new to racing so it should be good enough for me. I'm catching on fast though. Watch out here I come. Lol

[@vivos71]

Not too surprised that a Durange DEX8 based platform performs good. I do think some good upsets could be achieved with one of those with some further tuning and adapting.

[@Havingoneofthosedays-]

I’ve been waiting for a video like this for years 👍

[@RandyandCyndi]

I’ve been wanting to get me a typhon 6s now I know im going to get one that seems like a great buggy thanks for the info

[@MrBlompod]

Whats the standoffs? the bolts holding the shock to the tower? they're 3mm instead of 4mm? Interesting for a basher/race buggy. Could this be modified to take the thicker screws? I'm thinking of getting the Arrma Typhon roller and decking it out with high end running gear. Think that's smart? or just go with a race kit to begin with?

[@baggszilla]

I like it! I wish Traxxas would make a tuned race buggy as well! Thanks Mark!

[@bigmikewhitton]

M2C standoff are the best

[@ryanlsorrell1983]

So how do you know when the camber is off from driving it? Does it jump weird or pull to one side or something?

[@ryanlsorrell1983]

I ran at Indy two weeks ago and my fast lap was a 29.01 with an overall average of 30.9 27 seconds is A main material.

[@BhutJolokias]

Thanks for the tip on the servo MSM. Just ordered one.

[@aaronsoto4622]

Im not sure if i want this one or the Losi RTR Truggy. man this buggy is incredible for being an RTR.

[@bobbylefebvre6298]

Track looks insane

[@urielgarcia3781]

It performed great im surpised

[@garethwillis6028]

Recently got this car. Like it a lot

[@projectenergy]

Please do a comparison video of this and the losi rtr!!

[@sdyksterhouse]

How u feel about this vs the new Losi 8xe RTR???? Was thinking of picking up the rtr

[@Storyracing387]

Picked up 2 of those servos for my race cars! If it's good for Mark's program, good for me! 🤘

[@billycrowe8093]

Best servos around. That’s all my son runs in his racing rigs!

[@Storyracing387]

@@billycrowe8093 agreed!

[@GrandPitoVic]

That servo is crazy!!!!

[@its0nlya6]

The corner exit oversteer is likely because it’s a pillowball suspension, will have a totally different feel than your Tekno with C-Hub

[@bobbylefebvre6298]

Really great video cool car nice set up

[@ribbledean4111]

Run some nitro mark!

[@Storyracing387]

Hey Mark, with expo in the steering, is the more negative the better? And did you mess with punch settings at all?

[@TotalDohnut]

I'll admit I had my doubts last video. Looks pretty good

[@daledavis8093]

I believe that is the servo I bought from them and put into my rock crawler

[@voodooreptiles3553]

Im not sure if I would want this or just the roller.

[@franciscovazquez4589]

👌🏼👌🏼👌🏼

[@INSIDIOUS-ONE]

Those EXB STANDOFFS ARE GARABGE!!! they break just as easy as stock! Get the HOT RACING HARDEN STEEL STANDOFFS, you have drill out the shock towers but the kit come with a 3mm drill bit. haven't broke one since. The new losi 8xe looks sweet for a legit out the box racer not a racer/basher mix! I did really enjoy my TLR TYPON though,sold it to a guy yo help him get into 1/8 racing! TEKNO FOR THE WIN!!

[@Ilestun]

Dont go ArmA for extreme bashing anyway (I mean true extreme bash).....countless videos are showing their bashers are disapointing when it comes to durability.

[@rudiperez5315]

@@Ilestunwhat would you suggest…Traxxas 😂

[@PSF_RC-PatSmageFilms]

What gopro settings are you using for track filming from the drivers stand? I’ve been running a standard Typhon on a track and it’s not as quick as a full race vehicle but it’s still a lot fun after a few changes. Handles surprisingly well for a basher! I’d imagine the TLR tuned one is another step in the right direction.

[@mgg5050]

With the warranty that servo has why run a servo saver at all???

[@arthopfer]

Yay new car

[@Hungrybird474]

Heck yeah bro . 👍

[@basherz_den]

Awesome video mark! Still waiting to hear about a summer camp on the west coast.. I'm out in washington.. but you responded to me on one of your live feeds. No pressure.. 😏

[@chris239v8]

More race content would be awesome!

[@CplVeers]

They have a losi 8ight Xe rtr now

[@chrisvda7277]

Should try the Hobao Vs or Vs2. We have a Vs pro in the uk aswell.

[@ianjohnhorwood2605]

HoBao Hyper VS2 all the way 🤣 .

[@Killa_b_rc]

Last vid I asked you to post a vid if you tightening the servo saver because I was thinking “man if he can tighten that saver that’s great because I couldn’t do it” lol. I didn’t think you could adjust it. Thanks for confirming.

[@malsmith2012]

Snap rings work great.. East tactics here on KZbin has a great video on installing them in his EXB kraton and the awesome results out brings.. I did my EXB and it's great now..

[@django2467]

Losi 8ight xe rtr up next please 😅

[@lyricofwise6894]

Try out the losi 8ight rtr and compare, if can get one

[@gigi9467]

Haha this is soo cool, i have a telno racing rig but always like to see this stuff to see if its worth the price because honestly these kits and electronica are getting out of control expensive! Shouldn’t be this expensive

[@RC-Closer1313]

I’ve seriously been on the market for a good track buggy mark… I’m not worried about the cost, I mean I don’t want to spend stupid money on it,but which buggy would you tell a friend to get? RTR

[@clambin89]

G’day Mark which model is that ? A special proline edition haven’t seen that colour/model here in Australia Cheers for the set up info !

[@JVGmidi]

I have the Losi 8ight

[@bobbylefebvre6298]

I like new cars

[@phoenixninja8059]

Definitely cool but I still do think u should do some mini z stuff again I am from longisland ny and the mini z stuff is huge here

[@FishHardGetLucky]

Good vid

[@SuppleBun]

nyoom

[@MadNing_]

use snap rings under spring

[@douglasperry1226]

Get rid of the shock spacers and run a heavier spring super simple! It’s a no brain kinda thang! Lmao 🍻

[@virdi1992]

I'm new to RC cars. Can I run two 2s 50c 5000m batteries. What's the downside to this. I'm just trying to save money and not buy new batteries

[@dirtysoufracing6029]

With a nitro pro servo and good tires I have beat all the top brand buggy at my local track with the tlr tuned Typhon

[@dirtysoufracing6029]

And 10-10-7 in the diffs bc it's a heavy buggy

[@dirtysoufracing6029]

And 10-10-7 in the diffs bc it's a heavy buggy

[@tylermcneill]

Wow

[@c0nr4d]

My name is Mark Samria… 😁

[@gregorymoreland2140]

Now record someone racing that buggy in a sports man race

[@Arturito2017]

It’s an Okay car the problem is no one carries parts at the track so your gonna have to spend a bit to carry spare parts.

[@Rcjamaica876]

Can you help me with few items for my wltoys rc plz??

[@marquezpradoluisjavier7754]

😺✌🏻

[@thomashernandez4027]

I have that car. Bought it years ago. Keep breaking all kinds of stuff. Switched to Tekno and it was waaaaay better. But then switched to Mugen and nothing breaks in that thing. Plus it drives so elegant compared to Tekno and tlr typhon. The typhon is not bad if you want a basher that you might take to the track. But it’s really heavy. I think it’s more of a race inspired basher. You can race it but it will cost you so much in parts it’s not worth it. Mugen Seiki is so much stronger than both of these platforms. Plus there is zero setup sheets for the tlr typhon. I hate to say it but it’s not good for racing at a high level of competition. Most of the fast guys here in so cal run Tekno, Mugen,team associated and Kyosho.

[@johngisbourne7197]

The car you bought YEARS ago can´t be a TLR Typhon version. And setup sheets are available on the webpage. What a stupid comment.

[@Siempredevacaciones]

lol. You ain’t even close to Barry’s speed. Don’t lie. 😝

[@MarkSantaMaria]

you're probably right... I'm in denial.... hahaha

[@richiebricker]

a hundred dollar servo? I dont think so. Its a couple of gears and a small coil of wire. Oh, the gears are made of diamond and cant break ever and the case is made of Rhino horn. Ok then

[@psighosteumili]

you broke he same piece i keep breaking.

[@614mc]

Hey will you please fix my rc car I'll send it to you?

[@johngisbourne7197]

Indeed he will, just drop it by his doorstep like everybody else.

[@Marksbrother]

Mark, typhoon is pronounced “tie foon”, not “tie fin.”

[@mangoito]

Typhoon is pronounced “tie-foon”. Typhon is pronounced “tie-fin” or “tie-fawn” depending where you are from.