When you use this link to visit our sponsor, you support us► Fisch Forstner Bits: amzn.to/2tvzbJg Fisch Drill Bits: amzn.to/2BHJLl4 Subscribe (free) to Stumpy Nubs Woodworking Journal e-Magazine► www.stumpynubs.com/subscribe.html
@ShinChan-mz1cl5 жыл бұрын
Do you have videos that build cabinet using table saw?
@PPMOCRG4 жыл бұрын
Thank you! This has been very useful for me. I am a new table saw owner. I'm sure that I'll be watching again, and your other videos.
@---yu4ff5 жыл бұрын
What an uncommon pleasure it is to listen to such an articulate individual speak in a professional manner.
@carlcox73324 жыл бұрын
My favorite videos are stumpy and the wood whisperer. Theyre both easy to understand and listen to
@wozzy72 жыл бұрын
What an appropriately worded comment, very suiting and well described.
@gcp020063 жыл бұрын
That last tip-taping a piece of stock for support while running a piece on edge through the saw-awesome.
@patchesofgreen38325 жыл бұрын
Really like the idea of using two sided tape and an extra board for making the 60° bevels.
@davidlowe51925 жыл бұрын
Haven’t used that method but it is certainly a safer and probably more accurate way as you are not on the table insert but on the bed of the saw.
@laurielyon77402 ай бұрын
I’ve watched the previous 3 editions of this series and I can’t imagine there exists a better discussion on the fundamental use of the table saw. Extremely well presented.
@michaelgray30584 жыл бұрын
I watch a lot of how-to videos, but very few are as insightful, direct and helpful as this series. Well done.
@FullStackFool5 жыл бұрын
Nice to find someone who knows their woodworking stuff and can talk clearly and confidently to boot! Cheers for the series.
@Trigg69785 жыл бұрын
Thanks for making this series. As a newbie with no background in any of this it is very handy!
@discerningx3375 Жыл бұрын
You rock James. I have been making dust for 30 years. I am a safer woodworker from watching your videos. And I always learn at least one new thing. I need to cut a partial depth angled taper (simple project idea, difficult order of operations haha) and you triggered me thinking about how to do this in a safe way.
@adamalexander84603 жыл бұрын
Oh my gosh, the dimples in the old miter bar worked amazing.
@64maxpower3 жыл бұрын
It helps people that you respond to your comments. I appreciate your time
@Arkronicus5 жыл бұрын
I haven't done any real woodworking in 40 years and now being semi-retired have decided to get back into it. I have found that your videos are very informative and entertaining and plan to keep watching. Thank you for all the helpful advice and I look forward to future videos.
@llanman815 жыл бұрын
Mind blown by the edge bevel part. Awesome tip!!
@cfestudios70323 жыл бұрын
Super helpful! Was having an issue with getting an end bevel correct and this solved it.
@VanNelleX5 жыл бұрын
that last tip...awesome
@suegomez241 Жыл бұрын
Thank you for posting these videos. I’m New to woodworking.
@lpanebr2 жыл бұрын
I've been struggling with my miter wabbling in the channel and have it fixed now thanks to your tip! Thanks!!!
@epiclegacy34583 жыл бұрын
I know this video is older but thank you. I’m just starting out using my table saw. I’m making a frame for a mirror and I don’t have a miter saw. My dad says no problem you can do it with your table saw. So this was the best video ever. Very informative and you explain in a way newer people can understand. Thanks again.
@isabell48313 жыл бұрын
I have to watch your videos for a assignment for school and also put some tips down because in my class we use saws, I made a phone holder and it was pretty easy to make
@chrisansari4 жыл бұрын
I don't know about anybody else but being reminded to click "Like" on a video works on me. I'm four videos into this series and just remembering now to click it.
@ZombaJuice3 жыл бұрын
There are lots of tutorials out there, but few are straight to the point without fluff. This is super helpful--kudos to you and thanks
@IsaKocoglu5 жыл бұрын
9:23 is gold advice Keep up the great advice 😉👍🏼
@paul-ld9vh5 жыл бұрын
As always, you provide sound advice for your viewers. I really appreciate this because I had no role models to teach me anything about woodworking when I was a young man. Thanks again.
@jackdotzman29085 жыл бұрын
Couldn’t agree more, learned on my own.
@nymets11044 жыл бұрын
This video is absolute Gold, I have been trying to find a way to do a 30 degree beveled rip cut without assembling some crazy jig and this video saved me! Thanks!
@MichaelFemia5 жыл бұрын
This really helped me improve my end bevels: thank you James. A couple additional things I noticed / screwed up, from a beginner perspective: I used a digital angle gauge to dial my blade right to 45.0 in relation to the table, but my end bevels were all inaccurate, ultimately because the zero clearance insert I was proud of making myself was actually raising my workpiece about 0.3-0.4 degrees in relation to the table. My power switch on the right, and the arbor tilts to the left- when using the left slot, it felt really unsafe to have to draw my hand across the kerf line to switch the power off: just felt like something that would require extra risk and vigilance, without any benefit compared to using the right slot. Altogether, thank you!!
@800Viffer4 жыл бұрын
James Your knowledge and delivery are top notch 👍
@normancarnahan48934 жыл бұрын
Thanks, Stumpy I need to cut a 25-degree bevel edge on a chisel sharpening jig. You showed me a clever way to do that using my Powermatic table saw - using an auxiliary board between the work piece and the fence.
@marks56035 жыл бұрын
As a long time woodworker I have learned most of this, but almost always learn something from even your most basic videos. The value of thoroughly understanding the fundementals and practicing good habits, in any craft, can never be overstated. Thanks James!
@Daijonism5 жыл бұрын
As someone who has only recently acquired a table saw this video is invaluable. Thank you so much.
@huwdavies52645 жыл бұрын
Hi James, This series is a must for anyone who has a table saw for experienced, intermediate or a new user, in what to do but more importantly what not to do. As you say at the beginning keeping your fingers in the right place is a really good idea. Cheers, Huw
@derrickddub3 жыл бұрын
I appreciate these videos. I'm a newbie to this and I don't have a mentor, so I've found your series exceptionally helpful going through the basics.
@nathall22443 жыл бұрын
I'm loving this series. Excellent channel. Thank you!
@hondafannn3 жыл бұрын
The piece right near the end of the video about cutting bevels less than 45 was what I was initially looking for. I read a how-to article on how it could be done but didn't quite understand it until you demonstrated it here. So.. thank you! A ton of good information.
@pezmoz28355 жыл бұрын
Great tips. I'm really enjoying this series. Thanks.
@manuelbustos37763 жыл бұрын
Thanks for sharing your videos and tips, very useful
@dianahopkins79942 жыл бұрын
I've now watched all five, all more than once, and taken plenty of Notes for myself to use later on. BRAVO!! Your voice is easy to listen to and very clear. I'm one of those people who hears the lyrics to songs in odd ways and everyone later laughs hysterically when they realize what I'm actually singing: "...so long. It's been good to know you" ... becomes "so long. It's been good linoleum." Well, if everyone spoke as clearly as you do then I would never be teased again!! I am so perfectly the person you had in mind as the Audience for the five videos in Table Saw 101. I needed every point you made. I am deeply appreciative of your clarity and succinct style of presenting the main ideas and also the crucial though small detail. Second BRAVO! I want to know more about the "school" you are doing or planning to do. How far along are you? Information? DHopkins
@jlh59954 жыл бұрын
Hey James, thanks for this great video tutorial on safely cutting bevels on the table saw .
@bakermanxxx5672 жыл бұрын
Thank you Stumpy Nubs. Listening right to the end paid off for me. Now I see how an acute angled bevel cut is possible on the table saw! and I can do my own reducing door threshold :)
@DanCarlyon15 жыл бұрын
Thanks alot! I've really learnt so much in this series, I'm amazed that some people gave this a thumbs down these videos have without a doubt saved my fingers!!! Thanks Again!
@davidallen55624 жыл бұрын
Have been using TS for 30+ yrs & ashamed to admit I did not know of a couple of practices contained in this video. No wonder I disliked angle cuts so much. I inspired to mount a new attack on some of those cuts I've been avoiding. Great tips.
@ralphgioielli87014 жыл бұрын
Excellent video on how to cuts angles on the table saw. Very professionally done and very informative. Lots of good tips. Thanks for the tip on Fisch bits. I will have to start swapping out my mediocre set.
@jackdotzman29085 жыл бұрын
You do a terrific job of explaining your many great ideas of how to use woodworking tools to produce quality work......safely. Never fail to learn something new every time I watch one of your videos. Thanks for taking the time. JD in the Missouri
@MonthlyCramps4 жыл бұрын
I have owned a 3 HP Unisaw for years and love it. I framed my basement with recycled wood and saved a lot of money by ripping. As I watched this I about jumped out of my chair when you described the various ways to get the work to kick back. My dad trained me to stand aside when cutting. Your explanation about the work jammed between the fence and the blade about made me sick since I can imagine that I am there as you describe it. Oh, and I love the pusher block. Keeps you fingers far away from the blade...
@gazorsip69 Жыл бұрын
I have been struggling with some weird angle bevel cuts for external corners for trim around Plasterboard pillars. That double sided tape and the extra piece of wood I think is my answer to finding the right angle. Thanks mate, i really appreciate you sharing your experience 👍 😀
@R4wF4ce3 жыл бұрын
Ever since finding this channel, I've been binging it every day. While there's tons of useful advice, that last tip at the end would have helped very much in a project I did during school that had me resort to using a band saw to freehand some miters. Now maybe I'll actually finish it. After all, it's sitting right by my right foot.
@louisshambarger22305 жыл бұрын
You are correct. Although I am not new to table saws, I did learn something new to me. I like the double stick tape idea although I don’t know when I will ever need it. I’ll remember it.
@nathanscott17644 жыл бұрын
I would love to see you make your tablesaw sled. Have you made a video showing how to make it? If so how do I find it? Thanks. Also you are a very articulate speaker. You videos show you are very knowledgeable, clear, and educational. I grew up in the wood shop. My dad was a Carpenter, Woodworker, and painter. Though he did all of that his love for woodworking shined through more so than any other skill he acquired. Even though I grew up learning the rules, methods, and dangers of woodworking your videos serve as good reminders of what I learned growing up. Again, thanks for the videos.
@godfreyverdade23243 жыл бұрын
Thank you, I am just beginning down this path of woodworking...I have a Ryobi Table Saw I picked up recently, I am looking forward to picking up the miter gauge after this video. Thanks
@monkeyslap3 жыл бұрын
I'm greener than a country bumpkin when it comes to carpentry, and I'm only in the process of scoping out necessary tools, etc. for the backlog of house projects I've got going on. This video is really helping me mentally prepare for the types of cuts I'll need to be doing, and some best practices for achieving them. Thanks!
@kevingeaney77412 жыл бұрын
Very well explained, I got a lot from it even though I have years of experience. Most instructors talk about the alignment of the blade to the slot when the blade is at 90deg, however very few ever mention checking it at 45deg. If the front and back measurements are the same at 90 it does not follow that they are still the same at 45. This is because the table surface may not be in the correct plane. This makes no difference at 90 but matters a lot at 45. At 45, if the measurement from the slot to the back of the blade is not the same as at the front, the work will bind on the back (either L or R side) as it passes. Either the back or the front of the table needs to be raised up with shims to correct it.
@markprather7753 жыл бұрын
Thank you, James, your tips are very helpful!
@dougc785 жыл бұрын
I’ve been a hobbyist woodworker for a very long time and I still learned a couple of tips and tricks from your video. Thanks and keep up the great work
@cbarnettcti1234 жыл бұрын
The information is great and very useful. I am a weekend woodworker, and have learned a lot from your channel. But what I really appreciate is your delivery. Your voice is calm and measured. You don't shout to get a point across. You don't fumble with words. Your cadence is remarkably pleasant. You carefully distinguish fact from opinion. I'm a scientist in "real life", so I appreciate a calm, factual presentation.
@StumpyNubs4 жыл бұрын
Thank you very much!
@raymontella22514 жыл бұрын
One of the best video’s on tips. Very useful and great info. Thanks. Love your no nonsense and straight to the info approach.
@rhzamora47 ай бұрын
I had to make 18 1-ft long wedges with 60-degree sides to fit the inside angles of hexagon stackable shelves. The double-sided tape saved my fingers. Great tip. Setting my table saw to 30-degrees made the vertical angle cuts a piece of cake.
@olivepressdesign5 жыл бұрын
Love your videos, knowledge and personality. Thank you !!
@markyakubovsky3380 Жыл бұрын
James, the only thing missing in this series is that Redwings cup of yours. LOL- Hey I have an autographed Gordie Howe poster and puck on my wall behind me. Love your channel man- I have been an iron worker for years so picking up woodworking is very different for me. Many thx for all the teaching. Yak
@boastboy Жыл бұрын
Gosh, James, I want to sincerely thank you for your truly informative videos. As a newb woodworker, my confidence has increased in leaps and bounds by watching your videos. I’m not foolish enough to think I’ll be making kitchen cabinets tomorrow but I’m certainly more prepared to face the challenges of using a table saw, and to be fair, many other things. Thank you for your time and effort that you put into these videos.
@grahamparsons66205 жыл бұрын
Great tips , great series, your never too old to learn or refresh what you may have forgotten 👍👍👍
@BrianJamesWessel5 жыл бұрын
Your videos are great....you have a natural talent as an instructor.....thank you so much...really enjoy them and have learned a lot of new 'tricks' that lend themselves to efficiency and safety!
@muromets49292 жыл бұрын
I am always amazed with the high level of detail and useful information in all your videos! Thank you
@davidlamb35573 жыл бұрын
A fantastic find! I'm a new woodworker and have just purchased a DeWalt table saw. This course is wonderful. Good on ya Stumpy.
@michaelsanford80205 жыл бұрын
Love your videos, love that you talk a lot,more information that way. Ive not started into things yet, still learning and attempting to get basic hand tools to go that route. You have likely the best how to vids ive seen and can reference any subject necessary when I do start. Bought a plane and mini plane and began getting the blades up to snuff using your tips for sharpening. I was amazed that I was actually able to get something on its way to being sharp as it needs to be. Thank you for being here.
@tiffanyhackerspace83775 жыл бұрын
Nice comment. Agreed :-)
@daveweigle40905 жыл бұрын
What an awesome video! These tips will make us all better and SAFER woodworkers. Thanks, james.
@velixzeenАй бұрын
cool vid and great pace. Off now to the plywood vid, thank you very much.
@johnhood4925 жыл бұрын
I find your video's very easy to watch and very informative. They are helping me to learn how to safely use a tablesaw. Thank you and continue to keep making more videos as your input is valuable. Many thanks. John (U.K)
@charliezembillas39324 жыл бұрын
Thanks for the tips on bevel edge, will be very helpful on my upcoming project.
@jacktrotter53573 ай бұрын
Have you tested miter gauges for table saws? Do you have a favorite? Your videos are great .
@johnparker26363 жыл бұрын
Some great tips here - thank you.
@camaro3753 жыл бұрын
I appreciate the tablesaw tip my tablesaw goes from 0 to 45 but with your video tip I was able to cut my 50° angle a little hairy running the board up on edge but I got the job done with some help with some feather boards🙂 Thank again
@mgrotowski5 жыл бұрын
Thanks for another great tutorial. Your videos are informative and you don’t talk down to us. Some of the presenters on you tube think they’re the best thing since sliced bread! You don’t come across that way and I appreciate it. Please keep posting.
@briandean22965 жыл бұрын
As normal, very informative video, you never cease to amaze me with your knowledge. keep the video's coming because i have learnt so much. Well done.
@tommarchner5 жыл бұрын
Excellent! High quality video. Lots of good info (and no gimmicks).
@juntjoonunya92162 жыл бұрын
How do you cut a super low/long bevel like 15 degrees? Oh, you explained at the end. Crafty! I'd have sat there for days trying to figure it out lol
@julian55864 жыл бұрын
I just watched this video to learn more about the difference between a miter and a bevel. I have not seen the first three videos in this series, but I will now take the time to watch them. I really enjoyed this one and learned a lot from it. It was nice to see that the video was well done and the presenter clearly was very well spoken, prepared, and a well seasoned woodworker with years of experience that he is very good at sharing and showing to others. That makes him a cut above many of the other videos available out there. Thank you.
@iflovessonice5 жыл бұрын
Best definition for mitre vs bevel👌
@harvestofpeace.therese4 жыл бұрын
Thanks! One of these tips solved our beveled edge issue!
@jakevice5 жыл бұрын
I spent like 4 hours last weekend trying to safely cut a very acute angle and eventually had some ridiculous jig started and realized I should chill out and go watch how real woodworkers have done it once I relaxed. I just put that project on hold and still happened to watch this video. Thank you. I love simple solutions.
@FishingforViews3 жыл бұрын
Love watching your videos, I’ve used power tools for years but just got a new table saw, so refreshing my self on the safety 😊
@billyjay46723 жыл бұрын
Really good job James show more please.
@nikkibobbyandersom27694 жыл бұрын
My son and I love these videos my man and like the previous comment the articulation and how you explain things and love of the hobby have really inspired and helped me out. This was a very intimidating saw at first and my boy really wants to get into the hobby but when he hears your explanations on why kick back happens it has given him a respect of this saw. And I still won't let him use it just yet. Hope to see more brother thanks.
@tony50064 жыл бұрын
Hi James, thank you this set of videos aimed at me, a new wood worker. I find them very easy to watch and follow. Also you do not come across as condescending like some others I could mention. Tony.
@lpanebr2 жыл бұрын
Loving all your videos. I hope to remember all those tips when I'm in the workshop. It just occurred to me that a printable tips cheatsheet would be very nice!
@careyholman4 жыл бұрын
So much information, delivered succinctly. Thanks!
@merleschmidt87724 жыл бұрын
Stumpy, I love this vid. Most of your ideas are exactly like I instruct my students. I think I will show this video as well as demonstrate, since we seem to be living in a video generation. Thanks again
@jbb54705 жыл бұрын
Great tip with the dimple and I like the jig! Very informative video, all very well explained!!
@highpocket8885 жыл бұрын
Excellent tips and instructions. starting a furniture business and I appreciate any tips to make a more efficient and precise piece of furniture (art). Thanks, God Bless. subbed!
@petervanrensburg41714 жыл бұрын
Thank you for showing
@davidharvey56725 жыл бұрын
Thankyou I enjoyed watching. I'm struggling with my table saw due to the way it's constructed. At the end of the day it's what i can afford but can be frustrating as the bade rocks as you wind it up and down. I have to remember to set the angle on the up wind so that if I need more or less depth of cut i finish movement with the pressure in the right direction. One of those digital devices would surely help. Cheaper saw benches also go out of alignment with the slots if they get gummed up as the added strain on the peculiar hinge arrangement causes twist. You answered my previous query about a bevel stop too, thanks.
@pedroarellano42665 жыл бұрын
That's it. You are officially my favorite Woodworking KZbinr! Dang, that was great! Thank you!!!!
@kennethspengler99345 жыл бұрын
Great stuff. Anxiously awaiting video #5. Thanks James.
@harrypowers94125 жыл бұрын
Excellent James-you’re the best!
@greghalford26175 жыл бұрын
Good tips I will use several tonight.
@connanlee41885 жыл бұрын
Thank you for sharing your tips. I am making an URN with picture frames on the outside for the remains of a friends family dog. I want it to look perfect!
@makerspun48394 жыл бұрын
thank you. thank you. thank you for your guidance.
@MoGhotbi5 жыл бұрын
James, this has been a very informative series so far. Thank you.
@skippylippy5475 жыл бұрын
Excellent video - Thank you! I found this to be very helpful.