How to Install a Sliding Glass Door | This Old House

[@robertbragg9364]

I could watch these videos everyday. I can remember watching this old house on PBS as a child and learning so much. I love doing carpentry and fixing anything I can get my hands on. These videos make anyone with common sense and some tools able to fix anything in their home. I'm happy these videos started popping up a few months ago. I feel like I'm learning new tricks all over again.

[@bryanparker3139]

It’s the exact same situation with me. IPut this old house on every night from Pluto.

[@bsh21wash1]

Right? This show just gives good vibes

[@MrEmanon1233]

If only every sliding door installation went that flawless with perfect square frame 😌

[@robwinter3183]

Most don't. Preparation is key.

[@Johamo]

I was ready to go buy a door today until I read your comment lol. What should I get more of? 2 doors, framing lumber, siding, waterproofing, screws, and a tub of caulk?

[@Luckingsworth]

​@@thesweattexperience7741Nobody is going to do that when they can just smash the glass. Anybody worried about undetectable entry can easily pick the lock. Somebodh removing and then re-installing a glass door is NOT how you are going to be robbed.

[@oakspines7171]

Also, it is characteristic of the vinyl doors and windows that the frame deforms somewhat after securing it to the walls. It makes the doors or windows sliding a little harder.

[@ITAdministrator-k1z]

did you notice the stationary panel was installed on the outside. so the clips holding it are on the outside which means a simple screw driver and I can move the panel and enter the house. the stationary panel should have gone to the inside of the home so those screws aren't accessible outside. I love watching Tommy's videos. Even the pros make mistakes sometimes.

[@penelopeboythorn]

The inside handle can protrude from the moving door. The door wouldn't open all the way. If the handle was flush, the door couldn't be closed by that handle if the door was slid all the way. You couldn't reach it. You'd have to use the outside handle to begin to close the sliding door if the sliding door was on the outside. So, the stationary panel is mounted on the outside

[@nalvarado65]

Don't over think it. If anyone wanted to get in, there's two giant glass panels they can smash. After that, they can drive a truck inside and out of your house.

[@arthurthornton9298]

I often wonder if there isn't anything Tommy can't do, he makes everything look so easy.

[@derekleesmith76]

It's called TV magic. If something doesn't go right they just edit it out. Trust me I have been in the construction business for 30 years and doors especially sliders don't go in just like that.

[@wade727nelson]

@@derekleesmith76 I'm working on one right now. Not my first rodeo either. You speak the truth.

[@dragonfly9415]

yes ! every home rebuilder/ flipper has a team of 30 pros, hiding behind the scenes, doing the tough, hard work. but this guy looks like he put his time in. and everyone's getting paid well. good job!

[@williamstubbs9737]

@Jessica T indeed he is!

[@jefffeyh3704]

It's also about having good quality tools. Construction worker or not. Yes a good crafts person in any trade can almost use any tool and do the job. But as a Tool Junkie there's a big difference in cheap stuff vs middle grade, vs Just the Right Good Quality Tool for the job you are doing. And it's also about how you are using a tool. Everyone has different experience also. It's kind of like Martial arts the more you train the faster and stronger your ability. But if you think about it too hard it becomes complicated.. don't think feel. Let's say you have put in 2 sliding doors but that's all you've done. But a person who works as a professional door installer only does that. That person would be a master at door installation in 2 years or less doing it every day. But imagine if they did it over the next 30 years. Tommy is a contractor so His expertise is Building houses from the ground up and he knows a lot about everything in a house. The point is you could classify him as a Jack of all Trades Master of none. But that would be false. Tommy's ability has gone beyond the physical level because he is able to share and teach it. That is how you know a True Master. No matter what the teacher is teaching. Building, Art work, Martial Arts, Automotive, etc. The point everyone eventually becomes the Master of there own abilities. Unfortunately it is very Western to reach a level of training and stop learning even to the point of being physically unable to perform at any level. But it is When you realize you never stop learning that your ability improves in any and all things you put your mind too. Yes video and editing can happen and make the appearance that something is easier then it actually is. It can make bigger doors smaller and messy rooms look clean in 2 seconds. But the whole point of doing any Work is to experience it. As Work is one of the Ultimate Gifts that God has blessed us with. Friendship also Work should be experienced as it is. And not to be stuck emotionally in yourself about the job. I here many people and sometimes even myself say This work sucks. I wish I could do it faster. However some people gripe and complain so much about the job that it becomes the reason they work not to experience the blessing of it. Therefore they forget the reason why they are doing a job. One too make a better life for themselves. But two to help others build a better life for themselves. Those are the two main reasons in life anyone has too work. So if you must Work do What you Like.. not What pays the most. A very humble trim carpenter once posted a video. And he was suggesting that he held the fastest casing install. You see He was pulling a fast one on his audience. Because people who know him Knows that he builds the casing and trim on the ground and then installs it. So while his introduction to that video was theatrical and entertaining, the main objective of the video was not to gloat and say he was the fastest in the World although at first glance that's what it looked like. His purpose was to point out that building cases and trim on the ground will get you perfect trim every time. Once it's built you set it in the window ,you shoot one nail. And it's installed. Vs holding pieces of trim up and nailing one at a time. Which is normally what a lot of people even some construction workers do because that's the only way they ever tried it. But that's the thing there is a difference between rough ins and framing a house compared to Trim Carpentry and Joinery But it's all abilities. My whole point in writing this is to inspire others to strengthen there own abilities in there own crafts.

[@JG-pw5cr]

I love the safety shoes that the lady is wearing =)

[@DC-zu2qx]

And don't forget those heavy-duty gloves she's wearing either!

[@bsh21wash1]

Man, would love these guys to come down to PA to show me how I can fix my 1972 house up. I'm overwhelmed. Been watchin this show since I was a kid

[@charlenemccullough2293]

The design makes this AC a possible alternative to ductless DYI systems. It works great. The remote control could be more visual aid oriented like a backligh design. Is impossible to see the lcd at least for me. Easy install kzbin.infoUgkx_hHgTlzH3uk31Fe2RVS3xEbXHGaN_z5Tation. Came on time . Great comfort around the house 5 🌟 again. Follow mfg instructions for care and all and this should be the only AC you need for those of is that don't live in new homes with central AC

[@ananbebe6048]

This is not the unedited version. The original tv one he said... “if you want it to leak, keep doing it like you are doing” during the caulk scene. It is clearly edited if you watch this vid. They should have kept it in. It is around 5:17 when he says it. It is so classic. He always tells it like it is.

[@johnnysins4158]

Yessssssssssss. I’ve been looking for the unedited version of this video for a long time. He also says something else that’s pretty much talking down to this guy that was hilarious.

[@ironray123]

I could imagine the Red Green version of this......"Now, to make the opening for your new patio door you could use a bunch of fancy tools and do all the measurements and such......but that would imply that you actually have the time, skill, experience, and patience. I don't have any of those, but I do have one thing in my favor........the Possum Lodge van! The next scene you see him driving the van right through the side of the house.

[@appleintosh]

ironray123 If the women don’t find you handsome...

[@plumbingstuffinoregon2471]

You've forgotten the handy mans secret weapon!

[@plumbingstuffinoregon2471]

It's awesome to see other Red Green fans!

[@christophercrawford2736]

Random Stuff In Oregon duct tape!

[@AcutePanic41]

The lady of the house is something special... wow.

[@andy1621]

SO many reasons this shouldn't be shown without FULL episode. (And I've watched ask this old house enough to know they wouldn't skip any important information). I'm a home builder, trust me, this could go south in too many ways if you go about it as described here only.

[@kylerichard7459]

Never worry about load bearing walls, electrical, or gas lines before ripping through wall with sawzall.

[@couchpotato7862]

i was going to say

[@jeffhallel8211]

The lintel questions should have been addressed. Too many do it yourselfers don't have a clue. Someone pointed out that the area was most likely a garage door in a former lifetime.Of course a garage door would have a lintel strong enough to bear the weight of the house above it.

[@bendelaney7217]

Old garage door?

[@anthonystamper3355]

hahaha. "meh... just send it!"

[@melvindiaz5457]

I think they checked before but he didn't mention it

[@brofessor3115]

If this was my project it would be scenes of cursing, 3 extra trips to home depot, telling my girlfriend I dont need help and I dont know what time I will be finished and no I'm not going grocery shopping with you when I'm done....ok dammit ! Lol

[@PlayingwithPawz]

Sounds like me trying to fix my car

[@mattbartolovich8228]

I would hire it out

[@Scrapla1]

Same along with everything else I try to do lol

[@Side_Bar]

Me trying to hang a picture on the masonry wall

[@Gman6755]

And of course wishing you had Tommy there with you to do the job right!

[@Ambrosonic]

"Alright Jason, grab that saw, now you're gonna learn about electricity,"

[@surfmarko]

lol! yeah and nice "secure" door! Can anyone with a screw driver just remove the panel?

[@LazyScoutJace]

😂😂😂

[@wjb111]

That was my first thought. 😂😂

[@eaglevision993]

My first thought too.

[@thagoods3763]

Tommy wanted me to tell you that you spelled sawr wrong!

[@X360KBaller]

Every project i start gets 90 percent done like this and that last 10 percent like doing the siding and trim takes me about a year and a half

[@kathyr.6825]

Mee too!!! 😂

[@DetroitHomeInspector]

"Sment" AKA cement is actually concrete. Cement is an ingredient in concrete. Love you tommy !!!!

[@aldelgado9343]

Tom silva is still tha man.

[@sbuzz5889]

how will this drain water out ? threshold seams to need flash? a pan?,self stick barrier?what about sides ? try a garden hose on this door and your wood floors will pop.

[@christophersharp6591]

Yeah, no rubber membrane. No pan under the door. Good luck folks.

[@derekleesmith76]

@@christophersharp6591 Yup not even sill seal, or something! I say all the time these guys are hacks!

[@shaidyn8278]

When you open up a wall like that, you take out the inside and look for wires and stuff right? Before you start cutting?

[@stevehillier7018]

Tommy nailed it again lol. Was waiting for that dude to put the staple gun through his hand 🖐

[@RudyNortz]

These Old House videos are always "thin" when it comes to showing how do stuff around your house. Best ot view them as just an overview rather than a how-to.

[@derekb7260]

Well if you can not fill in the missing bits then you probably should not be doing the job in the first place.

[@waltwinston5825]

Yes he didn't show how to nail the top flange

[@СергейДенисов-д5я]

*Great and Easy to instal **Fastly.Cool** Low noisy*

[@mikewinburn]

He makes it look so easy.... I’m sure he is enjoying life being able to work in the arts for a living

[@epstv7254]

I love this guys because they always make the homeowners to work lol

[@summerforever6736]

its a scripted video....

[@amathest62]

Great video. I'm looking at adding one of these in my house and I don't have a clean. Love your tips to prevent water from entering the room. I would not have considered that. Thank you.

[@maciejfassa4394]

This channel has so many useful videos. I just want to share that Dako is my favourite company for doors.

[@ayadmatty]

When you screwed the fixed door in from the outside, can't somebody break in the house by unscrewing that door?

[@ElCid48]

Just use a truck to run through the door. It's faster.

[@shimes424]

@@ElCid48 screwdriver at night won't be noticed. This is a HUGE oversight. Sliding doors go on the *outside*

[@beeveebee]

Oh yeah, that's just what I want. A door that I can't open because the track is full of debris, snow, ice, etc. Come on. Put something on the inside to prevent it from being lifted out.

[@reyesnunez89]

Thank you I told no one notices

[@eaglevision993]

@@shimes424 Yes he installed it wrong. The sliding part goes outside

[@hanssolo3215]

Tom looks SO SERIOUS!!

[@BiiraBetrace]

I love that style of buildings and I need that work from now

[@icimblind]

How many people watched this and then do the same thing collapsing their house cutting down the support walls, or cutting through electrical wires?

[@Emeraldcoastking]

😂

[@tsetendorjee9040]

This is a very good TV show and we love it !

[@lowcontrast]

I love laying Sment!

[@samsngdevice5103]

It's a trademarked version of regular sement. Kinda like ARDEXteritist.

[@richhuddleston73]

Really Great Home Owners got involved and Learned How Too!!! Not just stand and Watch Tom Fix It😉😉😉

[@adamortner7172]

Wouldn't it be nice if contractors like Tom Silva actually were on crews!! Master at work!

[@knockofthebullshit]

amazing how everything fits so tight and perfect. NEVER happens in real life. He forgot about that siding.

[@danisdan01]

That door is backwards? The stationary pane should be on the inside not the outside. Whats preventing someone from unscrewing those L brackets from the outside and robbing the place?

[@blueribb99]

+Daniel L I think you're correct. The fixed panel is indeed on the inner track on my installation. The exposed screws in the video make it easy to break in.

[@manofweed1]

+Daniel L Maybe it's to stop people getting out ?

[@DougCeleste]

+Daniel L This is the expert, Tom Silva! He shouldn't make that mistake and I wish he was here to comment.

[@awhodothey]

No, the fixed panel should always be installed on the outside so you have the option to put a removable security bar behind it, next to the sliding panel, on the inside. I've seen it installed the way you describe a few times, and it's definitely not correct. You could put a security bar on the outside and lock everyone in! The fixed panel should have screws or a bracket on the inside too, and you could always use one-way non removable screws if it doesn't.

[@kenh8334]

Dear KZbinrs, The exposed bracket you see in this video is just part of the securing of the stationary panel. There are normally screws and/or brackets on the interior as well on ALL gliding doors I've seen in 15 years of servicing them... ;)

[@bryanhazelton5020]

Where does rain water sitting in the bottom rails seep or drain too ??

[@deedeedesir]

I don’t like how this door has the fixed panel clips on the outside. Anyone can get into the house with a screw driver.

[@johnsumner2987]

Alot of them are like that today. What they don't show you are the 5 other screws on the inside.

[@jakefuller7597]

Anyone with a chainsaw can enter your house. Face it.

[@UndercastEsmeganitrospeed]

@@jakefuller7597 That only works in the US

[@jakefuller7597]

MegaNitrospeed what else Matters ?

[@UndercastEsmeganitrospeed]

@@jakefuller7597 Ah, how classic, Americans thinking they are the best in everything 🤣

[@BlackieMiles1]

Excellent technique and walkthrough. Clear and concise.

[@idontknow2594]

Do you have one that you have a load bearing wall with a basement underneath and upstairs so you show how to support both while you cut into the wall?

[@NorthHoustonCityLimits]

Thats a man that knows what he is doing! Great Job!

[@charliegodinez9655]

I remember watching that episode when it was new, man time flys.

[@steveneumeyer681]

i used to know this guy who sewed the crotch on pants. I called him lord of the flies

[@alantaketa1512]

If some thief is going to break in they are not going to spend time taking apart a door to get in. They'll either try breaking the glass or find other way around the house to break in. They want to get in and out quickly as possible and not spend too much time without getting caught.

[@lolwtnick4362]

most sliding door can be lifted off their base with a simple crowbar

[@johnmccoy5269]

Ask this old house. Im a big fan the shortcuts expertese and professioliaum you guys bring excellent show keep up the very good work.

[@michaelfarmer2245]

Tommy is the best contractor, hands down.

[@ms.coffeetime7788]

Thank you for this video. I just wish he added things to do before installing , like what to look for and how to check before doing the work, what’s behind the walls exc… My luck if I try this the whole neighborhood will lose power 😅

[@johnb7346]

Step 1. Demo wall INSIDE FIRST so that you don't accidentally saw thru any electrical lines or other hidden essentials.

[@williamstubbs9737]

so true; good advice

[@bonnieh8874]

My thought, too! I'm replacing a bedroom window with a slider, and since there's an outlet right under the window now, I KNOW I'd be thinking about getting electrical wires dealt with first!

[@timothychapai4579]

Anyone else see how he nailed the top nailing flange? They put it under the shingles but I never seen him nail them? I am just curious. Either way. Tom is the MAN!

[@chaimewhhuguinssh2771]

Who actually has the door square the first time they measure it? This guy sacrifices kittens to the construction god.

[@7.3powerstroke6]

Tommy never makes mistakes. LOL but I seen a clip somewhere of him saying it sarcastically "I never makes mistakes" in a voice all serious.

[@billyjack3580]

As an instructional, it would be beneficial to at least fake a few typical problems and show how to correct them.

[@alext9067]

Jason listens while his wife does all the heavy lifting.

[@Shadow_wo1f05]

She definitely wear the pants in the family

[@benjaminsmith4519]

Someones well trained 😆

[@oohdirkadirka]

sment

[@kirktitgen6395]

Most of you complaining about the door being installed backwards have no idea There are some manufacturer's in the past that put sliding door on the outside, to make them more air-tight. Peachtree was one of the manufacturers who started this trend in the 80s. Most of you are complaining, because you don't know about it and think Tom is a fool to install it backwards.

[@andreafernandez2067]

I need the same BUT with a block wall. Any videos to recommend?

[@benjamincarpenter4376]

What would you have to do here if it wasn't square? Just manipulate it with some shims?

[@j8lech]

“You got some good sledgehammering flop flops on?”

[@fun782house]

nobody wear gloves , this guy would make a great work consultant

[@Truth_hurts459]

0:05 she couldn’t wait to tell them where the door was going 😂

[@OscarIslas47]

Awesome video, question- would you suggest putting up a temporary wall to support the floor above it? or the roof? or is the opening small enough that you're not worried about it? Thanks!

[@jshlnd14]

Only if it’s load bearing without a header. This already had that framed out because the door and window provide no structural help.

[@swirledworld340]

It's a concrete foundation, that wood they ripped out wasn't supporting the upper floors

[@aservant2287]

It's a surprise that the second floor didn't crush them. A temp wall was needed also there was no bearing header installed so nothing is supporting the second floor.

[@cdca1973]

Two words: walk-out ranch.

[@imagineworksgreat]

Tom is the master of masters. He is amazing.

[@sam111880]

nice , so its the metal brackets that hold the sliders in place the rest is just the same as framing a , door , window opening ,...etc It was the adding /removing the actual slider units on the casing that i didn't get very good got it.

[@calebmallen]

Alright Jason, have you ever used a reciprocating saw? Nope! Ok, well you're about to become a man today; watch and learn.

[@AcutePanic41]

Tommy should have the authority to revoke Man cards.

[@justanotherguy8791]

you ever see a grown man naked?

[@bradversary]

have you ever been in a Turkish prison?@@justanotherguy8791

[@ohigan]

do you like movies about gladiators?

[@frankieflashback9465]

Caleb Allen .........That was classic!!!

[@boedillard8807]

I'd love to work with him - he'd just makes you feel comfortable and confident that he knows how to deal with whatever the project is.

[@robre6840]

when tom has the angry eyebrows he means business jmo

[@ronnorris1504]

If you're replacing a window with a 6' sliding patio door, does there need to be a header the full length of the installed door? There is a header already over the 32" window. Thanks

[@ThisIsSolution]

Step one, blindly cut into house... remove possible load bearing wall without any additional support.... sledge the concrete, no protective gear required, ballet slippers will suffice for foot protection.... the list goes on!!

[@nycdan95]

ThisIsSolution it's television, they don't show you everything first off. And it's just for entertainment not a how to guide. Also the KZbin clip is even cut shorter than the clip on TV you don't know what was cut

[@Carl-LaFong1618]

that's why I have to listen to sh%t from homeowners because of my price or timeline. "well, they did it in 22 minutes. What's the problem."

[@maxpower2511]

I wish every project of mine was this easy

[@thomasgenders1756]

You might want to tell the homeowner to check for electrical wiring..

[@GeeTheBuilder]

Thomas Genders Darwin explained this in his book. Natural selection is awesome. Thins out those who deserve to die. Such as those who would cut in to a wall without checking. We know Tommy did check.

[@redavis1973]

Lmao I was thinking the same thing..! I know they.. Actually I'd imagine they checked off camera but its definitely something that should've been mentioned..

[@stevehillier7018]

Tommy very brave leaving his hand there with that Dude swinging that staple gun

[@mrfnk]

4 screws exposed outside? It’s that easy to get into that house?

[@TwoBitty]

mrfnk There are way more secure doors out there, but these tutorials are usually on a budget. Many have locking tabs and bars on the inside of the door, but I didn’t see any here.

[@DPAFF1]

Excellent job as always.

[@Randomname183]

Tommy: “sment” Lol love him

[@hedwardrodriguez2538]

Shocked you don’t have anyone wearing work gloves. Proper PPE man!

[@lot5953]

WOW it looks so easy to cut a house. House is expensive to buy yet so easy to tear it apart

[@qwqewweqw6137]

is it me or should the stationary door be on the inside so a thief cant just take out 4 screws and remove the door from the outside ?

[@kirkruiz12]

Yep can take it down with a screwdriver the way he did it

[@tommydukes]

Came here to say this.

[@Rbog17]

Lol. Only reason. I read the comments was to see if anyone else noticed this.

[@qwqewweqw6137]

@Roald Shakleton yes its made out of glass but if you look at the video at 7:12 he is installing the L bracket and screws on the outside of the house . Which means if you take out those screws you can remove the entire door from the outside making the lock on the sliding door pointless .

[@dkjoko]

05:47 , i like how he measure diagonally to make sure it's precision

[@patrickmccarthy805]

That's about the only thing he did right 🤔

[@tbone132tjf]

Shouldnt you have put a temp wall up inside to brace the floor above? And add a header

[@ShakespeareCafe]

Are you telling me Festool hasn't made a $1000 reciprocating saw yet?

[@christophercrawford2736]

ShakespeareCafe 😂 I was thinking the exact same thing. And I’m also surprised to see that it’s corded.

[@imbrandon16]

u did a good job on the sment.

[@burlahoe]

I like how he says, “cement”(sment) 😂

[@personalfunfest]

Woulda been cool to mention the header/lintel

[@telosfd]

Removing those L brackets easily can enter into the house or no?

[@RoastBeefSandwich]

Yep, forget about picking the lock or busting the glass. Just unscrew the L brackets. Enter the house with a Phillips #2 bit. The back panel should be the stationary one, Tommy got it backwards. A very rare miss for him.

[@shimes424]

Took me a long time to find this comment. Most people were complaining that they didn't show Tommy explaining why he knows there's no wires or pipes in the wall. I brushed that off as "of course he would've checked, but they probably should've mentioned it" then got to the part where the sliding door went in first and thought "cool, we get to see a blooper where he has to switch it around for security" I'm very disappointed in Tommy.

[@Formula2010]

The clip on the outside only keeps door in track. I’ve installed this brand of door and the fixed panel is secured on the inside as well. You could unscrew the L bracket and take it with you but your not getting in the door.

[@sergioramio]

good work tommy, you did it again!

[@jeremyprovonsil7886]

Where can I buy some of this sment Tommy is talking about?

[@jbvillarchannel8365]

very nice power tools , and i get an idea...thank you❤

[@patriotares]

what about supporting the wall?

[@lexluther8370]

+TIM WARREN - they have a meeting once a week and tell the wall how important it is in their lives, that the wall improves their life, and how much better it is than other walls.

[@spencercolgan]

But, why didn't you have to brace the load bearing wall with a temporary wall? Please explain.

[@Wunji1]

There was a window and a door there previously, so a lintel or header was most likely already there. The fact they they didn't need one suggests that it extended from one side all the way to the other....

[@augustreil]

The header is up inside the wall above the window and door.

[@cdca1973]

There was probably a garage door there originally, due to the fact there was an 8' opening in the concrete wall and no electrical outlet under the window. A steel lintel would have already been in place.

[@rjmcmusil]

I agree. but more than likely they already had a load bearing header above the door

[@tylerbolton8695]

Me who does this everyday "Nice"

[@1971mav]

Love reading the comments from all the "professionals".

[@utaichoro]

I love her safety boots

[@theopiner402]

I live in Minnesota and have a sliding back door...I hate it! The tracks constantly get snow and ice in them which gets in the way of the door closing. Also, it sometimes sticks closed due to the frost.

[@kcdiazWTV]

Alright Jason, do you like walls? Yes? Well tough.

[@nicksoehren4812]

Ever dropped a door wall sash on your foot that’s why I wear steel toe even in the window installing business. Those canvas shoes made my toes curl just hoping that wet sash didn’t slip out of her hands.

[@67preacherman]

I realize there is a nail plate going around these. I also have brick and have no idea how I would get to the nail plate. How do I replace my sliding glass door? Do you have to cut off the nail plate or remove the bricks?

[@rogerNOmore]

That concrete curb was a keeper... say hello to water infiltration.

[@Loosehead]

What's sment? Is it anything like cement?

[@jaysis9209]

when your wife is stronger than you !!! hahah

[@davros123ify]

How do you know thats his wife

[@AK-47ISTHEWAY]

That's clearly his daughter

[@Trackman80]

Amazing no header

[@mikelafferty9506]

2:05 she's swingin a sledge with slippers on! really SMOT!

[@mattsprayberry0]

This is one of those universal signs that says please rob my house

[@edvenuto9614]

Great show