@@rjanderson4207 The OS that should be ran on all computers
@TuncayAyhan2 жыл бұрын
Temple OS is a great OS for Octoprint! Been running it since 300 BC
@schogaia2 жыл бұрын
Terry indeed was the smartest programmer that ever lived
@fredwupkensoppel89492 жыл бұрын
I chuckled about sideloading on MacOS and then I was like "wait wha-?"
@Zeroshifta2 жыл бұрын
ive been wanting to get into octoprint for over a year now and this video just made it happen for me! Tons of android phones laying around waiting for a second chance.
@francistaylor18222 жыл бұрын
I have as well, and the dongles...but also have like 6 rpi's here so Ill use that as I dont love the idea of batteries in a heated chamber. I do think this is a great solution to use old phones though, as there isnt many use cases for them and if you are like me you have a bunch of them.
@tl18972 жыл бұрын
You can use an old Laptop aswell. But to use a Phone is 1337
@emmoemminghaus64552 жыл бұрын
I am glad that i dont have to solve this "Cheap" Problems this old phones produce
@jurgislll2 жыл бұрын
@@francistaylor1822 remove the battery and in it's place solder a capacitor.
@franciscocornelio57762 жыл бұрын
@@jurgislll can you elaborate on that one?
@m92singh2 жыл бұрын
What a gem this guy is, I discovered Tom a while back, but only now realise how amazing his content is, useful, innovative, novel, fast, comprehensive and to the point. Really enjoy listening, very good and humble teacher and also very fair on and subtle with sponsers and never in your face to support him. Amazing 3D printing channel, subscribed and hopefully will try support you somehow. Keep up the amazing work, we really appreciate it!
@MadeWithLayers2 жыл бұрын
Welcome aboard!
@m92singh2 жыл бұрын
@@MadeWithLayers thanks Thomas!
@memejeff2 жыл бұрын
ohh man, I have wondered if a phone could be used for several years. I thought I would have to root it and install something complex. This is ground breaking for me. Amazing video
@amrsoll2 жыл бұрын
For benchmarking the UI load time over an other browser, I recommend to time it after the login screen. The login screen has been optimised to take the least resources possible. Speaking as a dev who works with OctoPrint on the daily. Great vid and eye opener. Really enjoy it whenever people can repirpose their old hardware
@MrGerhardGrobler2 жыл бұрын
Now this was a very useful video. What to do with your old phone once you upgraded to the new contract phone. And no need for HDMI cables to a monitor you are using on your PC. Very nice. Thank you Tom for always coming up with a relavent topic for your videos. FYI, your 18650 battery video. I pay 1.5 Euro's for a brand new battery. So you paying 1 Euro each is a massive saving when you need hundreds of them.
@cwjdog572 жыл бұрын
Honestly, thanks for doing this. I was looking into ways of running RasPi apps virtualized in Android and this video popped up in my suggested a few days later, this is literally perfect. As a few folks have said below, for Creality printers that have backpower issues, cover the fourth pin (5V) on the USB-A connector (host side plug, one that will go into the hub or adapter) with a small bit of electrical tape as well to take some of the strain off these older batteries. Have it working now, and I thank you and the Dev behind this app, for putting in great work!
@amirsaeedirad2 жыл бұрын
Amazing work man and thanks to octoprint 4a crew too👍 You were and still are a great tutor for whole 3d printing community.
@SwervingLemon2 жыл бұрын
Awesome! Anything to keep the phones out of landfills, but huge bonus that the re-use is such a great application.
@3DJapan2 жыл бұрын
4:20 I used one of these on my trip to Japan. I used my phone to take tons of pictures. When it was full I used this to move the pictures to a flash drive, then went right back to taking pictures.
@johnboling37452 жыл бұрын
THANK YOU... I've been wanting to look more into OctoPrint, but since I've only had my 3D printer for a couple months I thought it could wait until I figure a few more things out. Now this might open up a whole new realm of possibilities. I have few old phones lying around (like everyone else) and even a couple tablets that I might be able to re-life as a print server :)
@tamasau87252 жыл бұрын
For you and for everyone: I waited a few weeks to write my opinion. After then I can confirm Octo4a works very well for me. I tested it on more smartphones. It worked also on a quite old Huawei P8 Lite. It runs now on a Huawei P20 Lite without any performace problem. I was able to set the energy management easyly. I made an "Y" cable, but it didn't work for either. It is currently running only on battery power. It lasts even up to a 24 hour of printing, or more. With a very used battery!! Especially when I turn off the camera server. I ordered a USB multiport hub. It's on the way. I hope it will work. I don't want to modify the phone with an additional battery charging module. The only one issue to me is about the camera focus. When I turn off autofocus, everything will be awful blurry. With autofocus too, but not as much as when it's turned off. I saw on github this is a current issue. So I'm waiting it will be fixed sometime. Overall I'm happy. I installed a BLtouch sensor. I was really scared to modify my printer. I scared about changing the firmware and losing the SD support too. But everything works fine. By the way my printer is Anet A8 Plus.
@rigormoritz2 жыл бұрын
Have you managed to get charging to work with the hub you mentioned? I have a p20 lying around with information regarding simultaneous charge with otg scarce for whatever reason. I'm curious if you got it going and if you did, could you share the model of the hub?
@seder872 жыл бұрын
@@rigormoritz Same issue, bought a otg cable from the link thomas provided but my one plus one doesn't charge while connected to the printer. thus the printer gets usb "power" from the connector of the charger....
@MxSpanner Жыл бұрын
I just recently got a 3d printer and wanted to have octoprint but i dont have a raspberry pie, i have so much faith of people believing there might be already a solution that you can use android phone as an alternate, so i searched the keywords, android phone octoprint and here i am. A big thank you to you sir for creating this video and the developers behind this!.
@menkabg2 жыл бұрын
Been looking at the Octo4a the past few days. Thanks for clarifying everything runs smooth. Thank you.
@EmoKillsBest2 жыл бұрын
I actually just reorganized my game room and actually found my Galaxy S3. I thought about just formatting it and tossing it out but I'm super glad I kept it now. I even have the USB dongle it came with as well so all I need is a splitter. Great video, thank you!
@bullzebub2 жыл бұрын
you dont even need that! the s3 has pins for wireless charging under the shell where you could connect a charger
@EmoKillsBest2 жыл бұрын
@@bullzebub I actually realized its not an S3, its an S7 haha. I already ordered the cords anyway so it's no biggie.
@josh_the_happy2 жыл бұрын
Thank you, was looking for a pi, but this will be great on a Galaxy Note 8 that sits around collecting dust. Exactly what I needed.
@christosminiotis2 жыл бұрын
haha i remember bugging the dev (politely ofc) on discord to release an update and open source for a few weeks! Glad to see it's actually usable now
@mbsquidward2 жыл бұрын
How perfect ist this video rn. I have an old phone with good camera quality and the same Adapters all at home.
@Gosuminer Жыл бұрын
As a returning 3D printer user I wanted to set up octoprint but I did not want to buy new hardware so I installed it on an old Raspberry 1B(!) I had lying around. Everything worked fine, even a webcam, but it was incredibly slow. Inspired by your video I converted my old Xiaomi Mi A1 (Android 9, LineageOS) to an octoprint server and everything works flawlessly and the UI is really snappy. Filip did an amazing job on the Android port, thank you very much for bringing it to my attention. To be honest I kept my old phone exactly because I was thinking about an application like this and I couldn't think of a better way to repurpose my old phone.
@jim.c67802 жыл бұрын
I always wanted to use octoprint but never got around to it but now that it's so easy to get it going I will definitely give this a try with my spare samsung galaxy S9+ hope it will work well. Thanks Tom for this video and many other videos this is why I sub to your channel over 4 years ago. Your videos are always packed with useful information.
@MrConminer Жыл бұрын
any updates on the s9+?
@henrikgilda49692 жыл бұрын
Great idea! I have my three old android phones stacked in a box and haven't got around to adding a webcam to my Cr10SProV2+Octoprint+RPi2+Klipper yet :) Now I won't need to hunt around for a probably at most 720p webcam for the pi at a probably not cheap price :D
@SianaGearz2 жыл бұрын
Simplish webcams are affordable again. I could buy a 1080p30 webcam with a very wide angle lens and fixed focus and terrible IR rejection and slightly wonky colour at Conrad for only 15€ (regular price for this sort of thing hovers around 30€) just a couple weeks ago. But it is actually super sharp and actually 30fps in MJPEG mode.
@puerlatinophilus30372 жыл бұрын
7:22 That one caught me off guard! I wish I could upvote twice!
@alexgu98462 жыл бұрын
I had several usb connection lost issues with my odroid xu4 running octoprint and I was just about to order a raspberry. After I had seen this video, I hooked up my Nexus 7 (from 2012!) and gave it a shot. It is not only running more reliable now, but having octoprint acessible right next to the printer on a big touchscreen is such a treat.
@MonkeyMedia962 жыл бұрын
been looking for a raspi 3 for th last 2 weeks now and havent found any in stock that werent just too expensive for my use. Have phones just lying around, this was super easy to set up and looks to be working great :D Thanks for the video!
@JacobP81 Жыл бұрын
I'm glad that you are advertising a PCB company because I might need to get a PCB made with parts soldered soon. I just added to favorites. I have a few companies that do PCB in favorites and I will compare to see who is cheaper.
@MisterKaen2 жыл бұрын
Are you a scorpio Tom? This is awesome i do not have many heros but you are definitely one of those heros bro. You made a huge impact in the 3d printing community and i can honestly say you always have been legit . Thank you
@jneilliii2 жыл бұрын
UI Customizer plugin also gives a better responsive mobile experience for loading the interface on the phone directly and is still actively developed where TouchUI has several plugin conflicts and doesn't seem to be maintained anymore.
@poodlescone97002 жыл бұрын
I have an old galaxy s5 lying around. You just gave it a new life.
@B4I342 жыл бұрын
"...and It is essentialy the same as running some software you downloaded onto your [...] Temple OS computer" cracked me 😂 good one!
@mrmas25352 жыл бұрын
Thank you for this! I am glad to have a use for my old devices and having a camera built in is great. Also noticed that when uploading print files on octoprint it is much faster than my rasp pi setup
@adamhun9942 жыл бұрын
Thanks Thomas for the info! Yesterday I was finally able to convert my old android phone without a battery to a printer support! I've removed the battery, soldered wires to the test pads (fortunately there were 3 of them for each traces!), added a LM2596s module and a 10k resistor as a thermistor. Without a resistor the phone won't turn on. Previously I've tried several Y microusb OTG cables but the phone stopped charging after a few seconds. This way I can use it until the charger is plugged in.
@adamhun9942 жыл бұрын
Okay, tried printing a few models now and have some trouble maintaining stable connection. I'm getting timeouts randomly and that causes the printer to pause for a few seconds. Sometimes the motherboard disconnects completely and the printer fully stops. I'm not sure if it's some kind of noise, but I'll check with a raspberry pie soon.
@MiGujack32 жыл бұрын
I'm trying something different myself. I grabbed a trash tier Galaxy J3 and made it charge between 40 and 60 percent through software (AdvancedChargingController). Less risk than a constant 100% charge. Making it work through a usb cable without battery is possible, but it's too much of a hack job.
@adamhun9942 жыл бұрын
@@MiGujack3 Totally agree with you! I wanted to go this way, tried like 3 or 4 different OTG + charging cables (for micro usb port), but I gave up. I wasn't be able to charge it while using as a host.
@MiGujack32 жыл бұрын
@@adamhun994 I will do a custom cable myself and report back. One of the pins should be disabled to prevent power going to the printer board. As in, full lines go to the phone but only 3 go to the printer board.
@robzks2 жыл бұрын
@@MiGujack3 The cable work?
@TheCaptnHammer2 жыл бұрын
Got lucky and grabbed a Pi0 2W for $15 the day they came out. It’s running octoprint and a camera just fine!
@dennysawyer39802 жыл бұрын
Wish I'd seen this a few months ago, before I bought a Raspberry Pi 3B. I managed to find a decent deal, but I will definitely be using Octo4a for my next OctoPrint installation!
@fumanseano28462 жыл бұрын
I never sell my old smartphones, usually cuz Im worried I'll break mine new device. Now I finally have a use for my old tech....THanks!
@noxin752 жыл бұрын
That segway into the Sponsor Spot was awesome!
@kingkeif24062 жыл бұрын
Thank you for this. I am new to 3d printing and after looking at prices, my Note 5 will be revived.
@Daniel_Wolf Жыл бұрын
Dear Thomas. Your explanation is impeccable, very detailed and easy to understand. I had been wondering if there was a way to replace the Raspberry Pi with an Arduino nano or uno (looking for a cheaper option since PI is very expensive where I live)...and suddenly, you came up with this great video and explanation. I just started 3D printing and the truth is that there are interesting things to learn. I have already subscribed to your channel. I send you a big greeting from the South of Argentina!
@naps1saps2 жыл бұрын
I just posted on Reddit a few days ago looking for alternatives. Thanks Tom! I'm using an old netbook which is another cheap alternative.
@PTEC3D2 жыл бұрын
I'd just like you (and your sponsor) to know that I was just looking at getting a PCB printed and the sponsor message couldn't have come at a better time. Plus, I suddenly find myself with a spare Android phone and OTG connector I was almost retiring. Spooky good timing
@PTEC3D2 жыл бұрын
And in fact I was about to retire EXACTLY that Samsung Galaxy Nexus!
@carsonplaysminecraft10182 жыл бұрын
This dude just described my situation perfectly
@walterbkeen2 жыл бұрын
My RPi4 just died, and orders for a replacement are at least a year out (14 months for me). Found this while looking for alternatives, and this appears to be a really good one and has me hopeful to get my printer back up and going.
@vincefortin8429 Жыл бұрын
I plugged my tv box Formuler Z10 PRO into my printer. I installed octo4a on it... less complicated than installing it on an old cell phone... it works
@dr.marvin48162 жыл бұрын
This is exatly what i had been hoping to do with my old phones :D thank a super bunch bud
@Oddman19802 жыл бұрын
I do love it when I find something to add to my printer that I already have the materials for. Currently setting my old Moto X4 up for this.
@bjohnrini2 жыл бұрын
Did it work for you with a X4? I'm trying and it just keeps crashing installing dependencies
@Oddman19802 жыл бұрын
@@bjohnrini I've been using my x4 for a few months now, no issues.
@bjohnrini2 жыл бұрын
@@Oddman1980 Thans for the reply. I have an amazon branded X4 and it keeps crashing when installing the dependencies, any ideas? Also, can you tell me which Y cable you purchased? or how you are powering the phone?
@Oddman19802 жыл бұрын
@@bjohnrini I have an old USB-C laptop dock plugged into the phone to both power it and give me a connection to the printer. My phone is a Google Fi phone I bought in 2017.
@bjohnrini2 жыл бұрын
@@Oddman1980 You have a link or info on the dock you are using?
@nicwilson582 жыл бұрын
Thank you, this literally took me under 5 minutes to get this fully working on my old Galxaxy Note 10+, really amazing.
@robh.82142 жыл бұрын
Borrowed a friends old galaxy s8 and it works well. Big problem, now I want one for each printer and I have to learn octoprint now….. Great solution and great video!!!
@johnnyricoMC2 жыл бұрын
On the phone clamp: Edelkrone has a phone clamp in their partially 3d printable line of products. Granted, the non-printable parts still cost more than the clamps you linked to. But printer cred! :D
@RitoriqPrinciples3 ай бұрын
Even two years later this makes more sense over a Raspberry Pi. With a phone you get all you need, the processing platform, a camera, power source, power backup (at least for the OctoPrint instance) and internet backup (WiFi and 4G or 5G). Additionally, in some setups you need an additional display since some displays can't be connected reliably to a Raspberry Pi.
@MikkelSkovgaard2 жыл бұрын
May i recommend using UI customizer plug-in instead of Touch UI. It's made to be responsive and supports phones, tablets and more
@Ddog6662 жыл бұрын
This is great. I have an old Samsung Galaxy S7 that's been sitting in a box under my TV for a year. I was going to try and sell it, but it looks like it's going to get a new lease of life with me. Cheers.
@Spice2 жыл бұрын
Wish this had come out sooner. I've been using an old 2008 iMac I bought from a local school for about a year now. Works perfectly fine, but it takes up a lot more room.
@vasiliynkudryavtsev2 жыл бұрын
That triagonal mosaic is so beautiful! BTW, it's probabably best to remove the battery because of potential fire hazard. There are some workarounds for the missing battery.
@schnecks2180 Жыл бұрын
I think I'll try my old netbook first but I'm very happy to have an alternative now! Thanks!
@ampex1892 жыл бұрын
Awesome! Thanks for sharing this! I don't have any spare pi's, but I've got a phone that should work perfectly for my ender 3!
@rwolterbeek Жыл бұрын
Fricking amazing! I'm definitely going to use this. This sounds so much easier than using a pie. And it even saves e-waste! Good job OctoPrint!
@bob2199 Жыл бұрын
I tried couldn’t get it to work
@nlahmi2 жыл бұрын
Been waiting for this for literally years!
@extectic2 жыл бұрын
I'm still amazed it's so hard to find a phone sized for actual daily carry and real human hands out there. The only flagship I can think of is the Asus Zenfone 8 (non-flip) - which imo is the best Android phone on the market right now imo. That said - I'd still rather use a Raspberry Pi for Octoprint, but that's just my preference.
@TechnologistAtWork2 жыл бұрын
I miss my original LG Nexus 5. 4" screen is perfect in the hand, we don't need all this glass and aluminum. New phones are ridiculously large and heavy.
@fabianweihe87022 жыл бұрын
I got the Sony Xperia 5 km3 it's slimmer due to the 21:9 aspect ratio. I can easily reach across with my thumb 👍🏻
@TheshBuilds2 жыл бұрын
S10e? It's on the bigger end but still fits in my hand. They're very well priced on the used market though.
@pr0xZen2 жыл бұрын
I believe you're looking for more of a _bannerboat._ What you request is rarely compatible with a _flagship._
@maxhammick9482 жыл бұрын
@@fabianweihe8702 I second the xperia 5 (mine's a mkii) - the narrower screen makes it much easier to single-hand
@madeintexas3d4422 жыл бұрын
I thought I was wasting money last year when I bought several Pi 4's to use for emulation. Now all of my enclosures have been gutted and I'm definitely glad I grabbed them when I did.
@Spb20052 жыл бұрын
Today i upgradet my pi zero w with an pi zero 2 w for my octoprint setup and it works so much better. i dont even need a more powerful pi so for 15 € its the best you can do.
@Triptweeze2 жыл бұрын
The Zero W was perfect for my application. Everyone else seemed to have problems with it but, for sending files over the network and controlling the printer it worked great. Good to know that the Zero W 2 works even better.
@professorsanjivkumargupta5595 Жыл бұрын
Innovative, informative, knowledgeable person, keen to share, and very detailed content. It is sufficient for anyone like me to get started.
@DeanosRides2 жыл бұрын
Got an old tablet I've had for a while. Going to give this a bash and see how it goes! Thanks for the great video...
@saddisman57625 ай бұрын
So i recently got back into Printing and this kinda was a tedious task that made it much more fun. I dont print often but now i have a way to do it without switching sd cards and spending money on a new piece of Hardware that might become obsolete in 5 to 10 years. I just wish there was more support for it. I would like to post my results whever i get some time (maybe also in 5 years) but I did mine using an old Oneplus 6 and an Ender 3 Pro 1.5v (4.2.2) Marlin 2.1.x. I learned a lot about more about the printer and code and i feel a little more satisfied with myself now that its almost finished.
@couldnotfindcoolname7 ай бұрын
Terry blesses you for including templeOS in your list.
@pennakira Жыл бұрын
Hi Thank you for the videos, it gave me the idea of putting Pi OS on Window Surface RT tablet I had collecting dust. Then I put OctoPrint and OctoDash on it. Now I can use the RT tablet for controling my 3d printer. The touch screen works great and it has a big screen.
@NSMike872 жыл бұрын
This is great - I just recycled an old Nexus 6 that has been sitting in a drawer. The only thing I'll say is, you should probably get one of those things that strips power transmission out of the USB connection - on my Ender 3 (and this seems to be a common Ender problem), the USB connection powers the screen on the printer. I didn't have one of those split connectors on hand that allowed me to charge at the same time, either, so I turned off my printer and didn't think about it. It drained my phone completely in less than an hour.
@MrEdnz2 жыл бұрын
you could just put electrical tape on the Vin of the USB male port, that way you disable delivering power to your printer. Thats also what I did when running octoprint on my pi 3b+
@artbyktoole8392 жыл бұрын
Saving this. I have a couple old android phones and was wondering if there was a way to connect them straight to the raspberry pi. This is even simpler. Thanks! You have a new subscriber.
@bryanlee72952 жыл бұрын
Finally i have a use for my old phones, thanks!
@corey3122 жыл бұрын
perfect timing!!! I was just thinking this should be a thing yesterday as I cant find a pi for less than $125 anywhere.. no thanks
@TheMidnightSmith2 жыл бұрын
PLUS a camera which is equally impossible to find!
@corey3122 жыл бұрын
@@TheMidnightSmith good point!
@corey3122 жыл бұрын
@@TheMidnightSmith I have 2 S7s I was legit about to bring in to recycle with a pile of other electronics so I'm happy to use them. I did score a pi4 on Chicago electronics supplier for my voron build though.
@nisargdoshi26402 жыл бұрын
This video just made my day ! I always wanted to make those cool time lapses on my Ender 3 V2 but never had the option because I already had the Creality wifi box... That works well but doesn't allow the variety of options which Octoprint does. Will surely be trying this out! Thanks a lot Tom 💯👍🙌
@AkiraFurball2 жыл бұрын
creality wifi box.. octoprint with none of the advantages LOL
@nisargdoshi26402 жыл бұрын
@@AkiraFurball not exactly... I got my first printer for 215 dollars with the wifi box and could pretty much print remotely so buying a ras pi didn't make sense. It was good enough for starters, but this is gonna be a lot of fun!
@AkiraFurball2 жыл бұрын
@@nisargdoshi2640 Creality wifi box... Octoprint with none of the advantages other than wifi printing ;)
@nisargdoshi26402 жыл бұрын
@@AkiraFurball yep that's true
@nisargdoshi26402 жыл бұрын
@@AkiraFurball That's why I'm making the switch. could you just explain to me one thing, something that I saw in another comment thread about the y cable messing up the printer instead of charging the phone... thanks!
@bennylloyd-willner96672 жыл бұрын
Just got my first 3D printer up'n'running (Prusa i3 MK3S+, haven't even installed the MMU2S I got with it yet) and was going to get a PiZero 2W and plug it onto to printer's board. This seems to be a better solution for me, with no cost for connection and camera since I already have a couple of Mobiles and OTG-cables. Subbed to get more goodies 😁😁
@provehitocobalt2 жыл бұрын
this is awsome. i have a raspberry pi but ive not had the time (also i was being lazy) to set this up. but i have like 4 old phones.
@rjc02342 жыл бұрын
Finally someone using an "old" smartphone for a video like this
@kevinmei38912 жыл бұрын
Please do more Linus sponsor transitions!!! @1:15 I legit laugh so loud, I farted and burped at the same time.
@WF3D2 жыл бұрын
Thats amazing! The cable mess was the most disturbing thing when using octoprint on the pi. Charger + pi + Webcam + light. Weird question.. phone light could actually also be used for the time-lapse setup. Or do you think running the light for hours and hours can reduce longevity of the device?
@petermuller6082 жыл бұрын
The camera flash LED should not be used for longer then a couple of seconds. Nevertheless why would you if you do a time lapse? Just take a photo every other minute ;)
@nobodyontheinternet7842 жыл бұрын
Something to consider while using a phone/tablet : If it's plugged continuously (like 24/7) for a long period of time (like months) the risks are way higher that the battery inflates, so big risk of fire. I learned that by experience and bunch of other folks had the same issue trying to recycle their old phone
@D9ID9I2 жыл бұрын
Battery can be thrown away. Just use step-down board with good 5V power supply.
@nobodyontheinternet7842 жыл бұрын
@@D9ID9I definitely, but it is something important to consider
@D9ID9I2 жыл бұрын
@@nobodyontheinternet784 consider to check voltages. It is fine to apply 3.7-4V constantly. But very cheap charger boards are not that precise often. If they apply like 4.3V to a battery then yes battery can easily inflate or just die.
@mutlubasdas2 жыл бұрын
Appreciate you and your channel! Just discovered you recently and keep watching non stop 👌💯
@themrjones2 жыл бұрын
There are a couple RCA tablets at Walmart that are under $80 and you can charge them with a little 5 volt plug and they have a full size USB and mini USB output so you don't need the little dongle
@bsim621 Жыл бұрын
Thank you very much, this works great, been looking at the Pi's and didn't want to spend that for one. I only had to go to git issues to fix the failed install on the phone, but this is a very good solution.
@thomasfranz25722 жыл бұрын
everything has worked out great so far, only thing is, I cant connect my prusa since it is not able to find a fitting baudrate. That was a couple of seconds ago, found the cause: disable the rpi setting within your prusa printer settings.
@mrphysics26252 жыл бұрын
Thanks Thomas! been trying to get OctoPrint for my printers and i didnt want to spend like $100 on a Pi, and my old phones been sitting here gathering dust for a yr and a half lol
@subuser96272 жыл бұрын
I use Octoprint on a RP with Polymer on the phone, works for years now. Can work also over internet with a VPN connection. This looks like a lot of work to get it right... And be careful with the batteries of the phones, especially with the lithium polymer, a fire in your house is really possible. This type is also very popular with drone owners and has already caused quite a bit of trouble.
@housinit2 жыл бұрын
I had planned on trying this at some point and now I think I have to do it. Great upload!
@Megaflare472 жыл бұрын
Nice, informative video - one thing to note is that currently I can only find one reputable company (or a company at all) that provides simultaneous charge with otg, that being Lava, but they happen to be very expensive, at about $30-40 apiece.
@santiagoblandon30222 жыл бұрын
It amazes me the amount of tech we obliviously carry in our pockets every day :O
@TechnologistAtWork2 жыл бұрын
As someone who's aware of all the nice tech that comes with an Android phone, this is the reason I hate iPhones, they have limitations and that shows in a project like this.
@zacharyyoung88072 жыл бұрын
I've tried this in the earlier stages about 6 months ago, but not much since then. much has probably changed since I used this. It's a great piece of software if you're in a pinch and want to try it out, but don't forget an old PC with an installation of linux can run octoprint just the same (plus there's a longer development trail, so it would be generally more reliable.). Great option though for quick setup (except for maybe designing the phone holder). Great Concept though and I bet it will only get better!
@tec43032 жыл бұрын
This a fantastic use for old phones. Also, a broken screen doesn't really matter for this usecase.
@DamienRobertsonYYC2 жыл бұрын
Fantastic timing, I was thinking of retiering my Android tablet (Sideloaded the Google Play Store onto my Surface Pro).
@TheMidnightSmith2 жыл бұрын
DUDE! Finally a use for my older pixel 2xl and Galaxy tab E. Yes! Thank you!
@blarbdude2 жыл бұрын
I just tried this with stuff I had laying around and it worked flawlessly! Unfortunately my wireless charger can't keep the battery from dying so I will have to buy an otg cable but very cool.
@PhyNxFyre2 жыл бұрын
I've tried this, ended up getting a used 3b anyways. It's near impossible to find a dongle that will charge and transmit data simultaneously, and even if I got that working, running my old androids for more than 15 mins could probably let me print abs on the glass
@SeanTaffert2 жыл бұрын
Nice vid. Good info. ...I'm a Pixel 5 guy too. I like the reuse of old phones for something practical.
@Whereswally6062 жыл бұрын
New use for my old huawei p8lite with broken wifi module. Bought a ethernet microusb adapter which should also work for my amazon fire stick in another life. This will free up my rpi3 for home assistant duty. Thanks Tom. Annoyingly couldnt find my otg cable that i know is in my empire of dirt somewhere.
@stewiex2 жыл бұрын
That is awesome! Sometimes I question my decision to use my sole Raspberry Pi as a Pi Hole server instead of as a Octoprint server... but not anymore! I conveniently upgraded from a Pixel 2 to a Pixel 6 this past week, and now it looks like I have found my old phone's new purpose in life! Thank you sir!
@eslmatt8112 жыл бұрын
If you install Raspbian, then pihole, then use the script install for octoprint. You can run both at the same time. Pihole uses basically no power, and octoprint only uses lots of resources when rendering time lapse
@stewiex2 жыл бұрын
@@eslmatt811 Thanks, I thought about it, but my modem and router are upstairs, my 3D printer downstairs and it's not worth the effort to me to run a network cable to my basement. Currently I just use a Blink Mini camera for monitoring large printers and can live with loading prints via an SD card.
@Max-kc2rc2 жыл бұрын
I like the trend to re-use an old phone. Just imaging how many devices with top notch hardware/camera/screen (perhaps a little weak battery) are laying around in the drawers of the world. Same would be good to just use like a standalone IP Camera, (like motionEyeOS)
@digital07852 жыл бұрын
yup or android cam which i'm going to setup another one of my phones this way to run it as a second camera in octoprint once i get octoeverywhere installed as i have a internet enabled webcam but inly through the companies app octo4a was a game changer for me for sure
@trueBluente2 жыл бұрын
Oh, this is perfect, my cell phone just busted to no daily use but for this it is perfect! I'm just not being able to find the USB Y-splitter, for a usb-C phone.
@uberwootage2 жыл бұрын
using this since it first released.Its been great ton more power then a pi as well.
@mysteriouspikachuman2 жыл бұрын
'That is already going to come with a power brick' Phone companies: 'Let me introduce myself to you...'
@grahamkeys2 жыл бұрын
Definitely giving this a go. I have two printers, would you have any recommendations/advice on getting a dongle that can power the USB C and two USB Y slots?
@DrPhilament2 жыл бұрын
Wow great video man, I'm connecting my retired galaxy s8 this weekend
@Anontesla2 жыл бұрын
Man thank you this is awesome!!!! Trying it now!!!! Do you know can you install the klipper plugin? Either way thank you just subbed and liked !!!