GM All Lights On Module by Fleece Performance Install: 03-07 Chevy/GMC

[@sekaf4125]

As a photographer a tip would be to film straight down so we could see better. I just got it in the mail. Excited to put in

[@thoroughbreddiesel]

Thanks for the suggestion.

[@RobtP6]

I put one of these on my 2006 GMC Crew Cab. It took longer to order than to Install it. Works great.

[@fullmetalfreedom]

Installed this in 120 seconds wow that was so easy and I love it

[@rodgerroy8090]

I installed this in my 2005 avalanche yesterday. They say on here that the relays are all the same. So when I went to install this module I went ahead and yanked the relays out without paying attention thinking they were all the same. So I put it in and ended up with a turn signal stuck on and wouldn't blink. I then looked at my relays again and seen that one of them is in fact different. I also was pressing down on them to make sure that they were fully seated. While doing that I noticed one of them clicking as I was pushing down. So I put the one that was different where the high beam one goes and Voila. Had to ride home in a storm last night and it lit up the road nice. I would recommend this to anyone out there. As long as your relays are situated the same in your GM it will work.

[@smokey5882420]

Do you have one for daytime running light and low beam only?

[@DM-qp7do]

Just installed it, worth every penny. Now if I could just get my daytime headlights to turn off on my 05 GMC id be happy.

[@KGrasso89]

Take the bulbs out thats what I did on my 03 Z71. My DRLs would keep blowing out bulbs and I hate them anyway.

[@DM-qp7do]

@@KGrasso89 But if I take the bulbs out I won't have low beams when I need them at night. Its the headlights that come on automatically that I hate, the running lights under them i actually like to have them on.

[@KGrasso89]

@@DM-qp7do That stinks I was afraid of GMC bring different. My truck has its own seperate bulb just for DRLs located next to the parking/running lights

[@DM-qp7do]

@@KGrasso89 Yeah mine is literally the low beams. And on your headlight switch on the dash it should have a "0" for off and then "Auto" and you can choose to be on auto or not. On my 05 GMC I have the same exact switch except its permanently on Auto, it doesn't turn off, and its not broken, its just the way it is. But there is a factory trick for your truck to turn the DRLs off. Just search "how to turn off DRL on a 2003 silverado or whatever your truck is on KZbin, ive seen it. But there isn't one for my truck Unfortunately

[@TheBuelliganRides]

Kick the e-brake one notch.

[@ziegle9876]

Love that product! Great idea.

[@Zach_Handle146]

This is an awesome mod, however if you have switchback LEDs it cancels the switchback ability

[@deckhanddoug]

Literally did the install with the video. Thanks for the video install!

[@thoroughbreddiesel]

Nice! YW.

[@MDTAR15]

Is it ok to use this unit if your truck is not equipped with fog lights?

[@virgilgray778]

Do you have one for a 2001 chevy suburban?

[@cace1968]

Hi, thanks for this vídeo I need to know is it fit on 2003 Chevrolet Trailblazer LTZ 4.2?

[@leer5394]

Mine works and then it doesn’t work… It seems like it’s loose underneath the fuses when you wiggle the one fuse around then it works

[@chaseclark4749]

Yeah I’m having the same problem did you ever figure it out

[@wdbowes]

Me too. I can wiggle the relays around and they’ll all work. Then I drive down the road and 1 or the other quits working again. It’s like the relays aren’t making good enough contact.

[@chaseclark4749]

It works at first but then randomly when I start driving the running lights don’t work with the hi and fogs

[@jamesrandolph3129]

I bought this same one but for some reason everytime I hit my high beams everything shuts off ? What could cause that

[@MrTalivan13]

you guys have for 02 chevy silverado 2500 hd

[@sareeen]

i did how you installed but still it wont work. it still switched high beam off

[@thoroughbreddiesel]

Go back through the install, if you are still having a problem give us a call.

[@manuelbarajas2796]

Will these work on my 2001 Chevrolet Tahoe

[@thoroughbreddiesel]

Give us a call 866-806-6142.

[@christiankuchenbrod3878]

Thank you!

[@thoroughbreddiesel]

You're welcome!

[@fmjjr339]

I thought it would turn on the drl also. Dam

[@wht240sxka]

Does this work on a 2001 since it’s same body style and generation?

[@thoroughbreddiesel]

No, only 03-07 for this module in particular.

[@wht240sxka]

@@thoroughbreddiesel thanks, which one would I need for my application?

[@lakerat318]

Will the fog lights stay on after i dim the lights or will i have to turn them back on each time

[@fnbaed]

I bought mine for a 2005 GMC Duramax my parking lights will not work it's either all or none

[@kylerobinson7826]

You're a little wrong it does matter how the relay goes because if you put it in upside down then suddenly you have power passing through the coil and not the contacts

[@lewisgeer1994]

I believe you are correct. I looked at the backside of one of the relays before installation of this mod and noticed that although the pins themselves dont limit the relay from being installed one way or the other, the numbering of the pins indicated to me it will not work as designed if not installed the way it came from the factory. I believe they each have some variation of normally open and normally closed contacts. I removed and reinstalled them as they where and they work perfect. I love this mod!

[@tjf1531]

i need one for my 2000 silverado

[@rodgerroy8090]

You'll have to go painless. I had a wiring kit in my Sierra. Worked great.

[@colmac6942]

Will this work on an 03’ Chevy S10?!

[@thoroughbreddiesel]

Fleece does not offer an all lights on for that application.

[@fernandotrejo1425]

Do you have one for 2011 1500 Silverado

[@thoroughbreddiesel]

Fleece has a revised all lights on module that works with several different GM platforms. All applicable platforms can be found at www.fleeceperformance.com/all-lights-on.html

[@ponderin]

My low beams turn off when I turn on brights, but everything stays on if I pull my brights lever back.....

[@thoroughbreddiesel]

Multi function switch issues?

[@ponderin]

@Thoroughbred Diesel the board dosnt quit sit right. I have to force the relays down a mm to get it to work right.

[@jeffreydonahoo2588]

Is there one for a 2000 silverado?

[@thoroughbreddiesel]

Not yet.

[@Coletrain0128]

What about daytime running lights on with this?

[@thoroughbreddiesel]

Yes, you get daytimes on as well.

[@Coletrain0128]

@@thoroughbreddiesel I’ve seen people say it doesn’t work. Guess I’ll just have to see.

[@erickocher5197]

After i installed it my fog lighs quit working.

[@thoroughbreddiesel]

If you remove it do they work again?

[@Lb7_Danny]

Great video. Thanks

[@thoroughbreddiesel]

Thanks!

[@jamesbarnes1173]

Hello, I did this MOD and I really enjoy it. Only issue is, when I press forward on turn signal lever to turn my high beams on, they won't come on. When I pull back on the same lever, I can get them to come on, but I would have to hold it to keep it on. Any idea what it could be? Bad lever? Bad connection? Thanks,

[@blacknbs3482]

Hmm that’s weird did you ever figure out what was wrong mine works fine

[@normden]

Had the same. Turned my headlight selection knob to the top position Lights ON (from Auto). Works now.

[@jackiestealthygirl2556]

@@normden awe man so your saying… it won’t work with the lights on the auto position? They actually have to be turned to the on position?

[@thethrebestnoobs]

Do this turn on the drl on without being in gear as well?

[@thoroughbreddiesel]

This only changes the normal functions of your lights when you turn on your high beams.

[@1996impalass]

Do you have one for the 2008 Cadillac Escalade

[@williamhanna6700]

I did mine today and it didn't work, fleece board.

[@mobilemowers]

But do you still have to manually turn your fog lights over everytime you drive at night ? So sick of that.

[@jimsharp3450]

No, when you turn to brights the fogs auto come on with this mod

[@texwill77]

Works great thanks!!!

[@thoroughbreddiesel]

You're welcome. Happy to help.

[@kozmicflush980]

4:18 system malfunction

[@blackgmc01]

i live in nova scotia canada

[@timwuancarter9800]

Does this fit 03 GMC Yukon

[@thoroughbreddiesel]

03-07 full size platforms yes.

[@hondaservicecenter]

Will it work for 1500

[@fredonthecuttzent.8405]

Why dont the drl come on? I've been having trouble trying to trouble shoot my 04 tahoe. I've replaced fuse and bought new bulbs and check for power and still nothing. Any opinion what it could be

[@mg90q61]

They only come on when you're in gear

[@Ismm1337]

Can you show us how to connect the dtrl to the spot your supposed to sodder to? Anyone got a video for that would love for it to be 8 high. Idk why they didnt make it a 8 high chip... Tgats not able to be done without sodder and wires maybe? Idk.

[@Ismm1337]

Guess what I'm tryen to ask is if a wire was soddered in to those 2 pin holes where would you put the wire in the 4 dtrl relay holes does it matter and would you need a resistor of some kinda?

[@GigawattGarage]

Why can’t they make one of these for late 99-02

[@thoroughbreddiesel]

I have a 01, I wish they did too!

[@KJfreshh69]

So much easier than what I’m about to do with single diodes I also want my DRL on with my fog lights

[@7557tnman]

I installed factory fog lights and bought the harness where would I plug it in?

[@thoroughbreddiesel]

Each different make and model has a different installation location.

[@brando-cu1st]

I did this now my truck dosent want to start it just turns over

[@derrickwoods2803]

Same

[@blackgmc01]

Do you ship to canada. I have a 2005 gmc 1500hd gas will it work in my truck for head lights and fog lights?

[@thoroughbreddiesel]

+john mason Yes we do ship to Canada. It will depend on how your fuse box is laid out. If your fuse box is laid out like the one shown here, then the module will work: fleeceperformance.com/electronics/gm-all-lights-on/gm-all-lights-on-module.html

[@1964rmcc]

Do you have a module for the GMT360 Envoy/Trailblazer

[@thoroughbreddiesel]

I am not seeing a application for the Envoy/Trailblazer.

[@jacksmith3189]

Have anything for 2002 Silverado ?

[@jakewah404]

Green wire mod will keep the lows on all the time. Cut green head light wire and put to ground

[@blackgmc01]

It looks the same how do i order ? A 1500hd is the light duty 2500 . thanks will be ordering soon

[@thoroughbreddiesel]

+john mason Give us a call at [phone] and we will get you taken care of.

[@blackgmc01]

Just was talking to your customer service rep i will be holding off the freight is a killer $70 plus the part . Thanks for getting back so quick .

[@thoroughbreddiesel]

+john mason Where are you located?

[@rylovlogs6756]

Will this work for a trailblazer SS?

[@thoroughbreddiesel]

We are not showing that it works for trailblazer.

[@Marine2111usmc]

Any update for a 01-02 kit?.

[@rodgerroy8090]

I had a 2000 GMC Sierra and was using a kit from painless wiring. It is likely the same kit that fits your vehicle. You'll have to tap into the wiring for this one though. Fairly easy.

[@galocarrasco1292]

hi, i have a question please, will it work on a 2004 trailblazer?

[@LlanosTv]

Can this work for like Pontiac torrent suvs since there GM, or is there a different way to do it

[@flippedmysled]

Will this work for my 2002 duramax? I see it says 03-07, or is there another kit for the 01-02?

[@thoroughbreddiesel]

+scott blume The kit is only for the 03-07 models. Currently there is no module for the 01-02 trucks.

[@jeffjeff5767]

@@thoroughbreddiesel it’s been 6 years now any chance there’s one for 99-02

[@asemastertechl1]

Get fleeced

[@thoroughbreddiesel]

💣

[@MrTalivan13]

you guys have for 02 chevy silverado 2500 hd

[@thoroughbreddiesel]

+IVAN sotelo The kit is only for the 03-07 models. Currently there is no module for the 01-02 trucks.

[@robertforrest9021]

Will this work on My 02 Envoy/ 05 Trailblazer?????

[@michaelfields8643]

Will not work on my 05 Envoy.

[@usmc5185]

Will this work with HID headlights?

[@thoroughbreddiesel]

If you haven’t rewired, yes.

[@usmc5185]

@@thoroughbreddiesel No the fuse box is still the same. I have not thrown any changes in yet. The only thing is the OEM pigtail goes to the ballast then to the headlight.