Thread Adapter for Suppressors?

Рет қаралды 17,101

Күн бұрын

Пікірлер: 13

@lucasblanchard47 2 жыл бұрын

I definitely need to get one of these so that I can use my 7.62 Raptor 8 on my .556 AR-15. Also might switch to the Raptor Adapter for a KeyMo QD muzzle device later on down the road. I’m so glad that y’all made this simple yet very useful thread adapter! Much love from Texas!

@lazydragonslayer Жыл бұрын

What do I do if the thread adapter gets stuck in the reflex? Asking for a friend... Of course....

@ojsimpsonofficial 8 ай бұрын

Where do I buy this at? Nothing is ever in stock

@Quality_Guru 7 ай бұрын

How about a thread adapter to go from M14x1 to 5/8x24 to enable us to utilize your 7.62 suppressor. That is unless you want the majority of AK users to use the Dead Air Wolverine which is already threaded in M14x1 threads. You are not even giving us an option, especially considering that many of us are finally jumping in to get our first suppressor because of the short approval times. A few hours of CNC development time to create new customers. It’s a win-win for your company and newer customers. You could also implement just in time manufacturing and run small batches. JIT is a Japanese management philosophy which has been applied in practice since the early 1970s in many Japanese manufacturing organisations. It was first developed and perfected within the Toyota manufacturing plants by Taiichi Ohno as a means of meeting consumer demands with minimum delays.

@deathkxssed 5 ай бұрын

I can't find a huxwrx 14x1 brake right now so what I'm doing is I bought a griffin armament 14x1lh to 5/8x24 adapter I have to Dremel a little notch in it so that the little security thingy on my zastava ak locks it in place. Then I can mount my brake to that and then thread my can onto the brake. Stupid but others have been doing it based off good reviews on the adapter

@Quality_Guru 5 ай бұрын

@@deathkxssed Thanks for the intel!

@David-hb1ik 8 ай бұрын

Just got a raptor 10 375 came w 5/8 flush mount. Used a cheap 1/2 x28 adapter and POI shift was horrendous. Still can’t find raptor adapter to use with YHM phantom QD which are on most of my tools. Hopefully that solves it.

@donjenkins 2 жыл бұрын

Do you offer 7mm end caps? I am shooting a Howa M1500 Action in 7mm-08 it came with 1/2-28 threads so I am excited to see this thread adaptor as an option.