Threshold & Attack - Behringer Flow 8 - Overview

[@stevebway]

A really brilliantly thoughtful and well presented tutorial. Could not imagine a more complete overview.

[@JasonFerguson1283]

Thanks for your review!!

[@wononewon5912]

How do you remove the white noise/static as I got it to ???

[@القارئالشيخأحمدإبراهيمحسن]

Hi bro Thanks very much for your good explanation I tried many times by many devices to link them with the mixer but everytime it gives me failed . How can i connect the ipad with it please ???

[@SkatingDog]

hiya, did you get the Flow App? just tap the bluetooth symbol. you need the correct app and firmware version though …

[@القارئالشيخأحمدإبراهيمحسن]

@@SkatingDog thanms brogher i already setup it I have a question please I have camera sony zv1 i want to connect it with this mixer to record video In which place exactly should i put the cable And which cable should i use

[@SkatingDog]

hm, sorry. i don’t know this cam

[@القارئالشيخأحمدإبراهيمحسن]

@@SkatingDog how can i connect the camera to the mixer And by which cable

[@SkatingDog]

i guess a stereo jack mini cable from headphone out will fit best for the sony

[@vasilisanemogios6539]

Great review!!! I can't find more info about Flow's 8 compressor. Which threshold does this comp have, which Ratio, Attack, Release? In which percent should i set up this comp?

[@cplcrapper7654]

Hold the Menu button for 4 secs to switch it off!

[@MiguelLSilva-ef5is]

Great review. Thanks for sharing. I’ve watched a lot of videos of the flow 8 and couldn’t figure out the following: connected via USB from my DAW, can I only send audio to the Master output on the flow or can I route different tracks to monitor 1, 2, etc.? I want to send backing tracks from my DAW to the master output (to front of house) and send other mixes with click tracks to monitors. Thanks!!

[@bradenreeves2624]

Is it possible to connect two bluetooth devices running the Flow app to independently control the two monitor sends simultaneously?

[@SkatingDog]

hiya, good question. but no, it just works with one bt connection for the mixer control. but you can connect a different device for the audio feed into flow

[@bradenreeves2624]

One last question. Is it possible to bring in usb audio (from zoom e.g.) and mix minus back out usb while using a monitor send for hearing the zoom call?

[@SkatingDog]

@@bradenreeves2624 hiya, i think no, because the usb audio channels all go into the stereo master which can be sent to monitor but is a combined stereo feed .. but i‘ll double check to be sure

[@bradenreeves2624]

@@SkatingDog thank you! I would buy one today if it was available but that particular function is my main interest.

[@SkatingDog]

@@bradenreeves2624 hiya, i just checked today and no: the USB driver has only the stereo as outputs. no access to separate channels.

[@mattg1094]

what's the verdict on the compressor? seems fixed everything... but no other options?

[@SkatingDog]

it‘s great for a one knob solution. indeed!

[@SkatingDog]

a gate would be great though ... but ... it‘s an amazing package considering the price and the footprint

[@prohorkarpenko8623]

As an audio interface for life long performance - would I be able to send a click to the monitor mix or headphones output? Without it going to the main of course.

[@SkatingDog]

yes, that is possible, indeed

[@helpik1]

Hallo great video, ich bin neu also wenn ich will record mit fx?ich habe gerat als recor mode aber ich hore beim record kein fx.was mache ich falsch Mir ist auch mnicht klar wann verwende ich streamin oder recording.

[@SkatingDog]

hiya, im streaming mode ist flow nur stereo, aber mit allen effekten. im recording mode bekommt man die inputs trocken, einzeln ind den rechner plus 9+10 als stereo summe mit effekten.

[@robphilpott3873]

Im new at this, My phone is asking for a pin number to connect to bluetooth, Where do I find this? Thank you.

[@SkatingDog]

i had that once as well ... ignore it. FLOW has BT for the editor and a separate BT for audio

[@PungkiAhimsa]

Hi, how do you record your audio from Flow 8 in this video?

[@SkatingDog]

Hiya, I use OBS for the video. And Flow 8 is assigned as audio interface for OBS, just like it would be for Logic, Skype, etc.

[@SkatingDog]

Hiya, it is just flow, as audio device activated in OBS

[@thelogoth]

I hear a lot of background hiss. Is this how it sounds usually?

[@SkatingDog]

hiya, this is unfortunately my computer at that point in time .... it couldn't handle audio and video processing not too well. so the fans started to blow very quickly, that's the noise. The Flow 8 is very quiet.

[@thelogoth]

@@SkatingDog Thank you for the quick reply.. it is very kind of you. Years ago I had a sound card that sounded like that.. so when I heard it, I assumed the worst. 😂. Thanks again for the reply..and for the video.

[@Videoramil]

Hi! Is there a loopback function on this device? Tnx.

[@SkatingDog]

Hiya, well you can record the mains which I think pretty much might be what you are looking for I guess?

[@BradBradstock]

Will it play backing tracks from a Mac in obs?

[@SkatingDog]

yes it will. the drivers are built so that the stereo master is on channel 1 & 2. all audio from mac apps gets into obs.

[@BradBradstock]

@@SkatingDog Thanks, I was wondering if that was the case. At the moment I use a Bose Tonematch T1, which does the job perfectly but on my Zoom L-12 Livetrack and my Steinberg UR242 it doesn’t work at all. I use OBS and the Bose for live streaming to my school. As well as using vocals and guitar I use backing tracks stored on the Mac

[@SkatingDog]

@@BradBradstock yeah, i was really happy to find out that they were smart about that. many i/o manufacturers don’t care. 🖖🏼

[@Neural_Nook]

Are FX available in monitor 1 and 2?

[@SkatingDog]

Hiya, as far as i have checked it out yet, no. no fx in the monitors possible. but maybe I haven't found the option yet.

[@sam_rae]

FX can now be in the monitors. Behringer added that in a firmware update.

[@rickybosky68]

Thank you, the best explanation in KZbin!! I have a question: in the page of the EQ, at the top right, there is a blu button named FULL. What is it for? Many thanks if you can answer me🤙🤙

[@Thomasabraser]

Thanks for this video! I am wondering, how good the Flow 8 works as an audio-interface. For example, can I play a virtual instrument without a big latency?

[@SkatingDog]

hiya, yes, you can. it basically works like any 10 in- interface. I'll do another video showing exactly that soon

[@Thomasabraser]

@@SkatingDog thanks!!

[@shaunblender]

Can't hear you.

[@chaimewhhuguinssh2771]

Dude just convert the sample rate on your audio files

[@gabedestellano]

Dude, high pass that mic @ 110hz!

[@balmeros272]

You mentioned unchecked box with monitoring headphones ? You are wearing headphones so I am guessing your listening to your own broadcast ? Wtf.