Through dovetails with the Porter Cable dovetail jig 4216

[@KennethBennett0]

After a frustrating day of failed attempts in the garage, I came across your video, and everything finally clicked. Thank you for taking the time to explain the process so clearly-your calm and thoughtful way of instructing made all the difference. I truly appreciate it!

[@hammerdownwoodworkingtracy3679]

@KennethBennett0 I am so glad it was helpful. That's why I do them. Thank you for those kind words

[@birddogmason9862]

Pulled my jib out of the closet, watched your video for a refresher, and off to the races. Thanks

[@hammerdownwoodworkingtracy3679]

Good deal! Let me know how it goes

[@edgoswick1271]

Yours are the best instructions for the Porter Cable jig on KZbin. I enjoy mine much more by following your guidlines.

[@hammerdownwoodworkingtracy3679]

Thank you very much. I have a Playlist for this jig you might be interested in

[@benlallier1721]

After watching your video I pulled my Porter Cable dovetail jig off the shelf, blew the dust off it and tried cutting a few dovetails. I’ve had it for quite a while but never used it. To my amazement they turned out just about perfect. Thank you for your very informative video. 😊

[@hammerdownwoodworkingtracy3679]

So glad to hear of your success using it.

[@donalddunn2983]

This is the best KZbin for this porter cable jig. You didn't leave anything out. Thanks

[@hammerdownwoodworkingtracy3679]

Thanks. I have a Playlist for this jig if you are interested

[@vincetoscano7018]

Thanks Tracy, Great job explaining the dovetail jig, best i've seen.

[@hammerdownwoodworkingtracy3679]

Thanks Vince

[@adambuilds]

Really helpful video. 24 minutes seems like a long video these days but yours was as concise as it could be. Thank you for the relevant step-by-step detail and good camera angles.

[@kurtgoodwin9490]

I've watched this a couple of times, picked up a good nugget each time. How you shift the template just a little to tighten the fit was a really helpful point, one of those great observations than makes perfect sense once someone points it out to you. Many thanks

[@hammerdownwoodworkingtracy3679]

@@kurtgoodwin9490 Thank you. I am glad you found it helpful.

[@ulflarsen9449]

Thank you for the video. Extremely informative. I really like your way of explaining the drawer layout as you cut your dovetails, very easy to follow.

[@hammerdownwoodworkingtracy3679]

Thank you

[@monteaustin1006]

I just watched the video on 5/11/2024. Thank you for a succinct review of the through dovetail process on this jig. Short, sweet and to the point.

[@hammerdownwoodworkingtracy3679]

Thank you. I have a Playlist of videos on this jig if you are interested in checking them out

[@monteaustin1006]

Anything on the Leigh RT400J for half blind dovetails? I have 5/4 walnut, that I have left 1/2 inch for the half blind dovetail (for the drawer front)

[@hammerdownwoodworkingtracy3679]

@monteaustin1006 No I sure don't. Sorry. 5/4? Man that's thick. I would have to hand cut those

[@monteaustin1006]

@@hammerdownwoodworkingtracy3679 Thank you for replying.

[@hammerdownwoodworkingtracy3679]

@monteaustin1006 Oh your welcome. I wish I had an answer for you

One of the better explanations on KZbin. Thanks!

[@hammerdownwoodworkingtracy3679]

Thank you

[@ricrowley8244]

Very helpful. The manuals are good, but I really appreciate the real world tips.

[@cnturion79]

Thank you for this great tutorial video. You saved people do Much monies learning how to do things on their own and be proud in their own work projects. This is the best video on setting up snd so detailed on the entire process.

[@hammerdownwoodworkingtracy3679]

Thank you. I am so glad you found it helpful.

[@NateHemming]

With your instruction, I put together three perfect drawers today using my jig after years of letting the jig collect dust in the corner of my shop. Your tips took the guesswork out of what was initially a daunting task. Thanks for sharing this clip. This is hands-down the clearest instruction I've seen. Great work. Cheers, Nate.

[@hammerdownwoodworkingtracy3679]

Thank you Nate. I am so glad it was helpful. That's what it's all about. That just made my day.

[@adamhetz3839]

Same experience here. Thank you!

[@dalejablonski436]

Well done, I just purchased a 4216 and this will help alot!

[@hammerdownwoodworkingtracy3679]

@@dalejablonski436 thank you

[@MikeyDonna]

This the best tutorial on this dovetail jig bar non. I’ve looked at everyone on the tube, there is none better.

[@hammerdownwoodworkingtracy3679]

Thank you very much for those kind words

[@PPG9944]

I had this jig sitting around a while. Decided to give it another shot after watching this. Thanks for demystifying it a bit. The manual only goes so far.

[@hammerdownwoodworkingtracy3679]

I have several other videos on this jig as well. Feel free to check out the Playlist

[@PPG9944]

@@hammerdownwoodworkingtracy3679 i am way ahead of you haha

[@samguo8558]

One of the best instructions on how to use this jig for drawers, from beginning to the end. Awesome video. Thank you very much.

[@hammerdownwoodworkingtracy3679]

Thank you. I have a Playlist for this jig you might be interested in

[@Jaypark1113]

This is best instructional for dovetail jig. Thank you for your time and sharing.

[@hammerdownwoodworkingtracy3679]

Thank you for your kind words. It really means a lot

[@dalewilson5024]

Posted one year ago, and remains the best tutorial available. Thank you for sharing your knowledge in such an easy to understand manner - that alone is a skill set only paralleled by your skill working with wood itself.

[@hammerdownwoodworkingtracy3679]

Thank you Dale. Comments such as yours and many others makes it worth while to do the videos. Thank you

[@dannyhurst9526]

Best video that I have seen on Porter Cable Dovetail Jig. You make it easy to understand how to make dovetail joints.

[@hammerdownwoodworkingtracy3679]

Thank you very much

[@rickfitzpatrick4469]

I have owned this jig for several years, after several attempts I could not get the pins and tails even close to alignment. So it sat on the shelf for years collecting dust, After watching this tutorial, I finally made my first dovetail box. Thank you for sharing this video. On another note: i will never purchase another Porter Cable product in my lifetime. Worst customer service I have ever experienced,!

[@hammerdownwoodworkingtracy3679]

Thank you Rick. I am glad my video was helpful. Sorry you have had a bad experience with their customer service dept. I have several other videos on this jig also if you would like to check them out. There are several joints that can be made with it. Thanks for watching

[@Knueppixx]

Sehr gutes Video, sehr verständlich erklärt. 👍🏻 Habe mein Jig bestellt und bin nun exzellent vorbereitet. Vielen Dank Viele Grüße aus 🇩🇪, Andreas

[@karthiksc47]

Really great patient coaching. Thank you. 🙏

[@hammerdownwoodworkingtracy3679]

Thank you for those kind words

[@markhilken7026]

Wow !! Excellent video on the setup and use of the Portercable dovetail jig - Thank You, saved me alot of time and reduced the learning curve

[@hammerdownwoodworkingtracy3679]

Thanks Mark

[@peterstevens6555]

Good evening from Auckland, New Zealand. Nice video. I just brought a 12inch Dovetail Jig from Melbourne, Australia should be here in NZ in the about 2-3 weeks’ time and I’m catching up on some video about how to use my jig when it gets here. 🤪🤪🤪

[@terrypinkerton2702]

One of the best and total explanations of the system. Well done.

[@hammerdownwoodworkingtracy3679]

Thank you

[@marcsmelser9508]

Very nice clear video on how to do this!! Your explanation was so clear and practical that I may be able to remember it!! Thank you!!!!

[@hammerdownwoodworkingtracy3679]

Thank you. Feel free to refer back to the video as often as you need to

[@kudasindustries]

Great video! Thanks for going into detail on how to set the bit depth of cut. The Porter Cable manual is misleading when it says that the gap from the top of depth stop should be 3/8" from the bottom of the template in all cases. That isn't true for through joints. The depth of the bit for tail cuts should be the thickness of the pin board and vica versa on through joints. Thanks again for the details

[@DanMilligan-n6b]

By the way amigo your video is fantastic, great job!

[@hammerdownwoodworkingtracy3679]

Thank you. It means a lot to hear that

[@TheWoodworkersClub]

Just watched your video and dovetails never seemed easier! Thanks for taking the time to make a great tutorial!

[@hammerdownwoodworkingtracy3679]

Thank you so much

[@robertgeorgemiller278]

Tracy. Best regards from Indonesia. I salute you for an excellent explanation. No unnecessary gossip or showmanship just calm and friendly expert guidance.

[@hammerdownwoodworkingtracy3679]

Thank you sir

[@ThomasWithenshaw]

Thanks very much, you’ve helped me to really understand how to use the Jig, now I don’t have to read the manual😂 Also I like the advice of laying out the drawer pieces that sort of information saves loads of mistakes and time

[@hammerdownwoodworkingtracy3679]

Thank you. Glad I could help

[@rdm1955]

Many thanks for a thorough tutorial. I just bought my jig and this really helps.

[@hammerdownwoodworkingtracy3679]

Hope it helps. I have a Playlist for this jig if you are interested

[@rdm1955]

@@hammerdownwoodworkingtracy3679 Absolutely - and many thanks (again)

[@mteel8921]

Excellent video step by step. Getting ready to make drawers today after a few years hiatus in the woodshop. I feel confident I can dovetail like a pro after watching this. :)

[@hammerdownwoodworkingtracy3679]

Thank you. That means a lot. I do have a Playlist for this jig as well

[@microreniassance2929]

Subscribed. Best video on the subject I have found. You're a credit to the craft. Thank you for putting this out there.

[@hammerdownwoodworkingtracy3679]

Thank you very much. I appreciate it

[@chriss5999]

This is the best video on this jig. Thank you so much for sharing it

[@hammerdownwoodworkingtracy3679]

Thank you Chris

[@algnojewski969]

You are the only vid I’ve seen that correctly states to set your dovetail bit depth to the thickness of your tail boards. I can’t figure out how a factory set depth guide would ever account for board thickness like those other vids suggest. You also are the only one who has advised how to creep up on a tight joint by adjusting your pins. No soup sandwich here, you got that straight and I commend you for no BS!!!

[@hammerdownwoodworkingtracy3679]

Thank you for those kind words sir. Thank you so much and I am glad you found my channel

[@kencook4956]

Great job. Looked at another video that wasn't nearly as simply laid out as yours. Actually just in the process of deciding on the jig. Looks pretty slick. I like it.

[@hammerdownwoodworkingtracy3679]

Thank you. I have other videos on this jig as well. Check out the Playlist. You may find it helpful

[@frankp8712]

Your video answered all my questions and I appreciate the help! Eager to start actually using this jig. Many thanks!

[@hammerdownwoodworkingtracy3679]

Thank you. That means a lot

[@maxgrove1661]

Nice video Tracy.. Better than the blooming instruction book! Max

[@hammerdownwoodworkingtracy3679]

Thank you Max

[@leeduffy1643]

Thanks for a great job explaining how to set up and use this jig.

[@hammerdownwoodworkingtracy3679]

Thanks Lee. I have a Playlist of this jig if you care to check it out

[@Jordanwoodworking]

Great video. This will be very useful video down the road when I try my hand at it

[@hammerdownwoodworkingtracy3679]

Thanks. Give it a go. It's a great jig. I'm glad I have it. I usually don't have time to hand cut. Saves a ton of time

[@timbyerly6944]

Nice Job you have all the details there are not in the manual . Make us all look good !!!! Thanks for you efforts

[@hammerdownwoodworkingtracy3679]

Thanks Tim

[@spudhut2246]

Excellent training video. Simple and to the point. I have a much better understanding on how it is done.

[@hammerdownwoodworkingtracy3679]

Thank you

[@42icee]

So thankful for this vid....thanks for posting it.

[@hammerdownwoodworkingtracy3679]

You are welcome hope it was helpful. I have others on this jig as well. I have a playlist

[@stevesiefken6432]

Great video! I just bought one, should be here in a couple days, but I will be referencing this video when I get started! Thanks!

[@hammerdownwoodworkingtracy3679]

Thanks Steve. I have a Playlist of several videos on my channel for different type joints. Be sure to check those out as well. Also a new product for aligning your work piece up by Chad Abrams. They are all in the playlist

[@stevesiefken6432]

@@hammerdownwoodworkingtracy3679 Will do, thanks!

[@Dadofour2]

Your teaching style is very easy to understand. You helped me decide on the porter cable kit for my shop. Thanks

[@hammerdownwoodworkingtracy3679]

Thank you for those kind words

[@williamporter9034]

Excellent video; I had not used my 4216 jig since around 2016 and your video is spot on. Thanks

[@hammerdownwoodworkingtracy3679]

Thank you

[@garynicholls72]

I am 62 years old and always wanted to make dove trailed joints and I can't thank you enough FABULOUS very informative

[@hammerdownwoodworkingtracy3679]

Thank you Gary for those kind words

[@drno4955]

haha trying it at 70. I've watched a several (over 15) videos on this subject and Hammer Down is the best one ! gotta love his accent.

[@hammerdownwoodworkingtracy3679]

@@drno4955 thank you very much

[@garynicholls72]

@@drno4955 yes I do agree with you, it's so nice when you can get tips and tricks from different trades on things that you always wanted to do

[@charliemurphy2523]

I just purchased this jig and watched your unboxing and this video and found them to be very informative. I even took some notes as to how to place boards int jig and such. I also have the same Dewalt router and was wondering if I would be able to use the plunge part of it to do these. You answered that as well. Very good videos, thank you very much.

[@hammerdownwoodworkingtracy3679]

So glad it was helpful. Thank you for the kind words

[@drno4955]

Tracy, I gotta echo all the comments I've read on this video. Great job.! Wish I had a shop like that. Looking for more of your videos

[@hammerdownwoodworkingtracy3679]

Thank you. Hit that subscribe button and enjoy. I have more videos on this same jig as well

[@brianmcquiston4211]

I have been struggling with getting everything set just right. Your video answered some questions for me.

[@hammerdownwoodworkingtracy3679]

I am glad I could help

[@TheJonkilleen]

Thanks Tracy. Great video.

[@hammerdownwoodworkingtracy3679]

Your welcome. Thanks for watching

[@tommccurnin524]

Thank You for Your Time and Effort in Making This Great Video I really learned a lot.

[@hammerdownwoodworkingtracy3679]

You are welcome Tom

[@normaguerra6158]

Excellent tutorial. Thanks

[@jimbow2644]

Best video I have seen yet! I would like to ask you to make video of cutting and installing the drawer bottoms. Also video of glue up of drawer sides. Thank you very much for your time making this video 😊

[@hammerdownwoodworkingtracy3679]

I will put that video on my "to do" list. I don't know how long it will take before I can do it. I have several other projects going but I will as soon as I can.

[@foinkle]

Fantastic procedural video. Thanks. I really appreciate how you included tips and tricks throughout!

[@hammerdownwoodworkingtracy3679]

Thank you

[@dougbrett-matthewson2640]

There are a bunch of vids on here for the Porter-Cable jig, this is by far the clearest and most informative I've found, many thanks!

[@hammerdownwoodworkingtracy3679]

Thank you. That means a lot. Feel free to share

[@kurtboogertman8292]

Best video on through dove tails I've seen. Learned a lot. Thanks

[@hammerdownwoodworkingtracy3679]

Thank you. I have a Playlist on this jig of several techniques.

[@hankcrismore6110]

Hi Tracy, I just received the 4216 and your video really helps. Thank you for your time in making it. Hank

[@hammerdownwoodworkingtracy3679]

Thanks Hank. I'm glad it was helpful. I have a Playlist for this jig of other techniques

[@MrRutontuton]

Excellent, concise guide. Thanks Tracy!

[@hammerdownwoodworkingtracy3679]

Thank you. I have a complete playlist on this jig if your interested

[@billyfarmer3967]

Excellent video, well explained.

[@hammerdownwoodworkingtracy3679]

Thank you

[@joemoore9802]

Very helpful and well done, thank you.

[@hammerdownwoodworkingtracy3679]

Thank you Joe

[@AllanGallant-h9k]

Excellent video, especially showing each and every step in detail. Thank you!

[@hammerdownwoodworkingtracy3679]

Glad I could help. I also have a Playlist of other techniques using this jig you might find interesting

[@thomasazzopardi4760]

I learned a ton of information from this video. Thank you for all the detailed information. Can't wait to try my own dovetail joints.

[@hammerdownwoodworkingtracy3679]

Thanks Thomas. Let me know how they turn out

[@archieireland570]

I love the clarity and detail great video.

[@hammerdownwoodworkingtracy3679]

Thank you

[@thematey3592]

Thank you sir. I have the same jig but have not used it yet. Your video is going to be very helpful. Thank you for your time.

[@hammerdownwoodworkingtracy3679]

Thank you. Glad I could help

[@8fishslayer]

Thank you for your step by step tutorial of this jig. I bought the jig and found the instruction manual to be poor. I've been burning up material trying to figure it out, even using other you-tube videos and have gotten absolutely nowhere. You, on the other hand, explained everything thoroughly and actually showed how easy it can be. I hope you have some young kids you are teaching the trade to. You are a VERY good teacher!

[@hammerdownwoodworkingtracy3679]

Thank you Troy for those kind words. I have 5 kids and 3 grandchildren. None of my kids picked up the craft and they are all grown. Maybe my grandchildren will. I have instructed wood working classes before. I love to teach. Which is why I do KZbin and maybe one of these years my kids will want to know how to do something and I'll have a video on it and they can let me teach them then.

[@jaayjones5937]

Really good job, better than many. I wish the Chad Abrams tool was available now, I always have trouble getting things aligned. One possible tip, put the pin board on the tail board and scribe a line, then set your router bit to that line.

[@hammerdownwoodworkingtracy3679]

Thanks. Good tip. I wish his jig was available too. He is still working on that

[@bobdinanjr2097]

Thanks Tracy very informative & helpful to this rookie!👍

[@hammerdownwoodworkingtracy3679]

Glad I could help

[@davidmcgrath6507]

Very nice intro to the jig!

[@allenhuckabee3764]

Thanks so much for your detailed video. I just bought this jig and your tutorial was on point! Thanks

[@hammerdownwoodworkingtracy3679]

Thank you Allen. Happy Woodworking

[@NectarFen]

Thank you for taking the time to post this video. Your dovetails looked great and your guidance was extremely helpful to me. I just picked up the Porter Cable 4216 and went through the instructions and for the most part they were okay but your video made it a lot easier to set up. Appreciated from Northern Virginia!!

[@hammerdownwoodworkingtracy3679]

Thank you. Glad it was helpful

[@billr6280]

Good information and great video

[@hammerdownwoodworkingtracy3679]

Thanks Bill

[@SonOfPatriots]

I've seen many videos on this Porter cable jig and this one is by far the most detailed and understanding. I really appreciate the time and effort you put into this. Now, I can dive into mine. Liked and subbed! Thank you!

[@hammerdownwoodworkingtracy3679]

Thank you very much. Glad I could help

[@pgadams1]

Excellent video. Thanks!

[@hammerdownwoodworkingtracy3679]

Thank you

[@rickallred9985]

Great video, just got the 4212 porta cable dovetail kit, thanks for detail in your video, saw your first unbox also

[@hammerdownwoodworkingtracy3679]

Thanks Rick. I also have a video on sliding and stopped dovetails using the jig also. Be sure to check that one out as well. Check all my videos out lol. Thank you so much for the kind words

[@terrybolerjack197]

Great information. Not beginner stuff but executed well for the intermittent to gain new techniques !

[@hammerdownwoodworkingtracy3679]

Thank you

[@michaelsimmons4712]

Thanks for this video. Especially the setting and explanation of depth (gauge) and how to layout and rotate pieces. Did my first dovetail on Porter Cable delux last night as test and will do both regular and minature drawers today!

[@hammerdownwoodworkingtracy3679]

Thats great Michael. Glad I could help. That is the whole purpose of my channel. Have a great day

[@davidstuart4489]

Thank you for pointing out this video as well. Again, Sir, Outstanding! If you aren't a woodshop teacher right now, I reckon you should be. Thank you for doing these! I'll go view the other videos using this jig. Mine shows up Tuesday. So applying what you're teaching will make next week really fun - and hopefully successful!

[@hammerdownwoodworkingtracy3679]

I have instructed woodworking classes. I have a highlight video on my channel as well from a class i done. I am also a custom furniture builder. Thank you for the compliments David. It means a lot and I am humbled by them.

[@yamadog24]

Great overview of this jig. I have had one for a while and am just getting around to using it. I like how you went through making a whole box. Most videos only show one corner. Most projects have more than one corner.

[@hammerdownwoodworkingtracy3679]

Thank you.

[@jasonm887]

This was great. Thank you sir!

[@hammerdownwoodworkingtracy3679]

You are welcome Jason

[@srg3798]

What a great confidence inspiring video. I just ordered a jig after watching. Thank you.

[@hammerdownwoodworkingtracy3679]

Thank you for those kind words. It really means a lot

[@JoseVazquez-gj2xp]

Excellent video. One of the most explanatory videos in any subject I've seen. Thanks for sharing your experience. Just bought the Jig, and this is what I need to start.

[@hammerdownwoodworkingtracy3679]

Thank you. I am glad I could help

[@dickreed5302]

Thanks Tracy for the informative information. I'm working my way through the steps to being able to make boxes using the Porter Cable Jig. Started with another manufactures Jig and was not real happy with the results and made the move to the Porter Cable after watching your videos. With the help of your videos I feel I can confidently move on and be successful. Again thanks for the great videos.

[@hammerdownwoodworkingtracy3679]

Thank you sir. Glad it is helpful.

[@rgilman46]

You sir are a very good teacher. Thank you.

[@hammerdownwoodworkingtracy3679]

Thank you very much for those kind words

[@richardlug6139]

Great demo video I liked the tips about setting and checking the depth and the tightness of the joint.. A couple tips I got from Kings Fine Woodworking demo video on this jig especially if you do not use it very often. Take a sharpie and write on the template about where the outside of the stock is to face when cutting the pins and tails. I am sure other people have thought about this I put a piece of tape on the outside of the stock so when I flip it from end to end so I do not make a mistake and cut them the opposite way.. A pencil mark will work also, but a bright piece of tape catch’s a persons eye better.

[@hammerdownwoodworkingtracy3679]

That's a great idea to use a piece of tape or other method for marking the right side. Thanks for sharing it. 👍

[@cedarcrossbeefarm5399]

Great video. I've wanted to buy this jig just wasn't sure about it enough to pull the trigger. I have now fired that shot. Thanks for the input.

[@hammerdownwoodworkingtracy3679]

Thank you

[@davidguy1630]

Tracy, I know that this is a little over a year old, but you nailed the instructions. I just got my jig and I followed your video and the first time it was almost perfect. I got it a little loose, but I’m confident I can get them a little tighter next time.

[@hammerdownwoodworkingtracy3679]

Thanks David. I am glad it was useful

[@toddplager8676]

Great directional video!! I have made a few coasters learning this jig. The black stopper brackets i found out the hard way. when doing the small dovetails i had to change the black brackets for the gray ones. The layout is absolutely most important. ty again great video your a pro!

[@hammerdownwoodworkingtracy3679]

Thank you Todd. I really appreciate it

[@stevewaddell2859]

Great Video!

[@hammerdownwoodworkingtracy3679]

Thsnk you

[@watcherick4433]

Nice!! I’m buying this Jig and Follow your steps!!

[@hammerdownwoodworkingtracy3679]

Thank you

[@Wyman642]

Amazingly clear and useful video. You have a gift for teaching. Thanks.

[@hammerdownwoodworkingtracy3679]

Thank you so much

[@johnmount1622]

Great video, I just got the jig and this video will be a great reference to use, thanks.

[@hammerdownwoodworkingtracy3679]

Thank you very much. Glad it will be helpful

[@pedalman4595]

Thank you for this completely detailed setup and use. This was the most helpful tutorial I have found on KZbin. Keep up the great work!!!!!!!!!!!!!!!!!!!

[@hammerdownwoodworkingtracy3679]

Thank you very much for those kind words

[@lui1648]

Thank you Tracy for a great instructional video! I have just began to use my porter cable jig and on the advice of another person posting on You tube I installed an additional nut back of the brass one. This allowed me to snub it down after getting the final adjustment and prevented any movement. I used a regular hex nut for this purpose and found it to work well. Again this was not my original idea and it seemed to address a possible concern. Thanks again for your excellent teaching technique. Best regards Gordon

[@hammerdownwoodworkingtracy3679]

Thanks Gordon. Glad I could help

[@jessealanis7443]

Great video sir... Best I've seen on this jig. Thank you for sharing.

[@hammerdownwoodworkingtracy3679]

Thank you so much.

[@scraplifetrashtocash4551]

Mine was brand new in the box for 2 years. This made me want to open mine and do some boxes. Ty

[@hammerdownwoodworkingtracy3679]

Thank you for those kind words. Let's me know how they come out

[@charlescunningham4661]

The best instructional video I’ve seen on dovetail joints, and the Porter Cable jig system. You have an excellent teaching manner. I’ve subscribed. Thank you. Is the Porter Cable jig system your favorite? Charlie Cunningham

[@hammerdownwoodworkingtracy3679]

Thank you. It is. It is the only one I have ever used. Except cutting dovetails by hand.