thrustmaster tmx drift mod

make your thrust master faster with this mod here:www.thingivers...
Also wen you get the thrust master driver downloaded, I have it set to 280 degrees in the thrust master settings. I found that it was the closest ratio to a real car with the gear mod

[@lastzou4605]

well, the modification is satisfactory until you see that the sensor is out of adjustment to such an extent that it sees 900 degrees as 1150 in one direction and 1120 in the other.

[@amendboi]

I always go for the lowest option then try to make it better for some reason but it kinda worked out

[@Skizerrr]

bros ready to whip a ship with that many rotations

[@entilzhar]

dude any chance of the link for the gears please, cant find them in google, many thanks

[@amendboi]

Description

[@tomassmusicgang]

whats the old bigger gear width?

[@tkostang]

We’re your efforts worth it? If so then I’ve got ceramic RC 5:50 bearings that will fit. Also I’d probably find a belt solution that will resist stretching

[@huhkgerry]

is this only good for drifting or ? races as well ? better thanm the stock ?

[@eduardomachado6065]

How did you make the steering wheel faster, I have a g29 and I want to get one of these but it is very slow in transitions. how did you leave it like that?

[@amendboi]

3d printed the gears in the link in the description for a faster gear ratio. I recommend getting a shifter since the wires twist that control the buttons and the paddle shifters inside the wheel.

[@vertachi8066]

Hey have you ever done a motor mod

[@Patiojewelry]

Hey man, I did this mod and my wheel is now stuck in calibration mode, did this happen to yours?

[@amendboi]

I had that issue at first but it was one of the plugs in the wheel that wasn’t pressed in so the way

[@AEVUZIK]

bro you have tmx with 2nm and now your engine in tmx looks like have a 25nm

[@amendboi]

Motor is 2nm all I’ve done was bearings for the rollers and the gear mod

[@AEVUZIK]

@@amendboiI know the tmx/t150 have 2nm but I mean when you add other better gear and you used metal rollers your tmx look like have a 25nm engine

[@AEVUZIK]

@@amendboi and I know this you still have a 2nm engine

[@amendboi]

Ohhhh I see what you mean lol my bad yea it’s way better minus the wires twisting up inside for the buttons and paddles but an external shifter would fix that

[@lithiumirl2238]

link aint working mate

[@amendboi]

www.thingiverse.com/thing:5276285

[@Denisstrix]

I can recalibrate the Wheel to the 0 Point by Pressing a key kombo

[@koukikev8813]

Best fix would be a t300

[@koukikev8813]

Jk lol great video

[@ConnorTucker-d2i]

That gs tho 😊

[@amendboi]

Yessir!! Eventually I’ll post videos on that soon I’m just dialing everything in on it

[@N6.K6]

عنوان الفيديو كيف تخرب الطاره 😂

[@eggsbdbf2060]

لكن صار افضل غير التروس