Thunder Tiger EB4 engine cleaning and reassembling

[@wuommk]

Nice video bro.. i got truggy thunder tiger st1 4.6 engine. These engine are really robust..

[@superaidenproductions1870]

Awsome! Can’t wait for part 3! Great job

[@thebug4046]

Me to still needs quite a bit of work to get everything else sorted out like the electronics but it should be pretty fun and thanks man

[@trentonmiller8255]

Best believe I wanna hear it run

[@thebug4046]

Soon!!!

[@lfbarni]

I know by my engine that the crankshaft ends with the diameter of 5mm under the bell house, but I can see it gets thicker it get closer to the engine block, I couldn't disassemble my engine yet so I can measure it so I question, what's the diameter of the crankshaft on those 3 diameter changes you can see at 4:46?

[@thebug4046]

I don't have that engine or that truck anymore I have no idea what the measurements are

[@m32racing]

you got a .70 heli engine bud?

[@thebug4046]

Nope 21

[@ryangoburdhone8149]

I am having some issues with putting the clutch back on, and cuz the flywheel is tapered should there be gap between the flywheel and the main body or not? please help

[@thebug4046]

Go to nitro rc enthusiasts group on Facebook

[@rafiedamag8665]

hi bro! the star bolt stuck in in my carb it was difficult to remove even i heated with the the blue torch..any help please..

[@thebug4046]

Never heat your carburetor directly you will destroy every single o ring and rubber part in it go to Facebook and join the nitro rc enthusiasts group

[@keveshannaidoo5670]

What are good options to use as after run oil?

[@thebug4046]

Air tool oil works great

[@elrubitopiconrubio3434]

hello where I find spare parts for the car eb4 s2 pro?

[@thebug4046]

I got my parts from my local hobby shop

[@rafiedamag8665]

can i use wd40 to clean?

[@thebug4046]

Brake clean Works much better than WD40 also don't use WD40 as after run oil

[@joakimlundgren520]

what do you use for oil?

[@thebug4046]

Klotz castor oil for putting it back together just note it's not meant to be used as after run oil

[@joakimlundgren520]

@@thebug4046 have not run my thunder tiger in 2 years, now i will clean the engine because it does not want to start. then think about which oil to use because I only need so little

[@joakimlundgren520]

I just need a little and wonder where I can buy them?

[@joakimlundgren520]

is there something equivalent that I can use instead? which can be purchased on a smaller scale?

[@thebug4046]

@@joakimlundgren520 when you clean out the engine you can use non-chlorinated brake parts cleaner and you don't necessarily need castor oil that's just what I use you can use after run oil or even just a little normal engine oil to put a thin coat on a moving parts