I have watched a gazillion videos on welding, mainly yours and the awesome Mister Chucky2009. I learned more about TIG from this single video than you would believe. I finally get it. Thx.
@haroldpalmsesq25063 жыл бұрын
Good lord, stop watching chuck. That guy is a whackadoo.
@Laura-wc5xt3 жыл бұрын
@@haroldpalmsesq2506 he is no longer around,,,,back to farming in Texas...channel is shut down.....
@haroldpalmsesq25063 жыл бұрын
@@Laura-wc5xt good. Nobody in the welding community wanted him around.
@weldingtipsandtricks14 жыл бұрын
@rcfreak2493 if you go strictly by the math, with the flowmeter set at 12 cfh the tank would last about 10 hours of constant welding depending on how much postflow gas was used after the arc. ... not exact due to the surge at the start, but its close enough for figuring the cost of tig welding.
@autonomousindividual77809 жыл бұрын
Hope your getting something in return for these videos. They're very well done and a great help. I'm sure someone out there could find a criticism, but for someone brand new or fairly new they sure instill confidence and prompt you to start trying/learning which is the biggest step. Your speaking in plain terms that people can learn from. Too many people try to analyze to whole damn subject before they even touch it for the first time. Especially TIG welding. A lot of people still talk about it like its magic and get up on a high horse with the technical terms and the dollar figures for equipment.
@stephenmiddleton8916 жыл бұрын
John Symchik ,yes John I've polished my welding skills most satisfactorily using these videos
@JMB.fabrcations7 жыл бұрын
I want to take the time to let you know Jody just how much I and im sure many many other people enjoy and learn so much from you're welding tips and tricks videos! I've personally learnt more from you're vids than I ever have anywhere else! my tig welding was pretty good before I first found you're videos on KZbin, thank you for making the information so easy to understand and so easy to get! massive fan from the UK! keep up the good work dude. thank you
@twwtb8 жыл бұрын
Hey Man, I guess you had comments disabled on your previous video about the TIG finger. FWIW, I see no problem with promoting it here. It is an awesome invention and I hope you have the patent for it or that it is on it's way. I came here because of a comment from Tom Lipton on his channel. I am watching your back-log in earnest to get an overview of the welding processes and finally get my first machine. I am a mechanical engineer (not a PhD, what a relief) my career didn't take me into working with my hands, but it was a good career. But I grew up building and fixing things. Now in my later years, I have a desire to get back to working with my hands. I just ordered a TIG finger. Aside from a few rusty old welding rods that came with my first house (left in the garage by the previous owner who had passed away) the TIG finger is the first piece of welding equipment I have obtained toward my semi-retirement repair and fabrication activities. Love the videos, Best Regards, Rich
@tommylud43244 жыл бұрын
Deffinitely need a new video on this...especially with silicon bronze.
@81aturner12 жыл бұрын
Good Video Man, Im a welding student, and i really did learn some stuff with this video.
@CubaVids10 жыл бұрын
3-4 pulses/sec works *great* for stainless sheet metal. I use that frequency often for welding 16ga stainless (no filler).
@CAflatty13 жыл бұрын
Very nice videos. Great narrations....excellent teaching skills. Very good job.
@runningwithscissors32803 жыл бұрын
I 100% agree with your take on 1 or so seconds per pulse or 30pps and above. It's not an aid to beginners and is really an advanced technique that will screw up a newbee. Another way to make it more 'tirck' is to have a fast pulse rate AND pulse the pedal.
@EarthshipFreedom12 жыл бұрын
you are crackin me up. " build a lifting lug and hang grandma over the grand canyon" hahaha
@orangereaper9 жыл бұрын
Leaving the wire in the puddle (around 3:15)... is it feasible to lay the filler wire in the joint angle then just use the pulse feature to melt it in place or would that not leave enough filler in place? It's difficult to see if you are still feeding wire into the puddle or just leaving it static and melting it as you move the torch.
@Daynaleo18 жыл бұрын
I agree with you, 3 pulses are aggravatingly distracting. If you weren't epileptic before you started a 3P weld, you would be after a few minutes of that.
@arcinandsparkin14 жыл бұрын
Another great video!
@TheMartinto12 жыл бұрын
i love watching this videos i learn new tricks all the time thanks man!
@rcfreak249314 жыл бұрын
about how long would a 125 cf argon tank last me when welding? say welding strait. for X amount of hours. how many days would a 125 cf last for you?
@chappledesign2 жыл бұрын
When you are using a foot pedal, doesn't that override the max and minimum amperage settings? I can set the "peak Amps" to 125, but the base amps stay at 5 and you can't change it when the pedal is plugged in. this is on a Razoerweld 200 acdc. Are the base amps dictated by the position of the foot switch after the initial "Click on" and up ramp motion once the pulse starts to "pulsate"??
@gustavocanestrari8143 жыл бұрын
Hello, good day, I have a syncrove 350 and I don't understand what the pulses below one second are for, example 0.2 0.5 seconds? Thanks a lot
@jonesgerard14 жыл бұрын
Pulse rate is annoying at certain rates due to sympatheic heart rates. 3 pulse per sec causes anxioussness.
@justinverbaux647411 жыл бұрын
As much as I love pulse tig welding with my everlast welder, I don't think I'll be trying that 3-4 pulse per second experiment any time soon. Just as my brain is getting used to the arc flash it goes out and when it gets used to it going out it flashes again. It makes me nauseous!
@rotlerin11 жыл бұрын
Jody, as a noob, I can follow most of what you say and do but what I don't quite understand is when and when not to do a weld prep. I would have thought you would have prepped this job to give better strength rather than welding up to a square face. Thanks for your videos. Better than Breaking Bad . . . . . . .well almost!!
@jonathanlittle30127 жыл бұрын
This is great information. I've learned so much from your videos. Off topic question - what model Everlast welder is that in the background?
@chriskinn92078 жыл бұрын
0.6-0.9 PPS is good 5%-15% background and a peak time of about 35%-40% those settings on Dynasty 250 DX. I was able create unbelievably consistent and aesthetically attractive welds with that combo, super easy to do also.
@courier11sec14 жыл бұрын
Great video this week. I agree the 3-4 pps was awful to watch. I couldn't put up with that.
@goood667314 жыл бұрын
I like to use pulse welding
@FrustratedBaboon11 жыл бұрын
I miss my grandma and still cant weld.
@transmitterguy4787 жыл бұрын
Another excellent video. My brain is getting bigger.
@feckless714 жыл бұрын
Well done Jody, I love to see the e-mail alert to a new video, keep up the good work, the longer vids are great, I must get on to you for a T-shirt, you do sell them,,,,don't you :) regds Gordon Ireland
@erikwilkinson337611 жыл бұрын
So i can see the benefits of pulsing for hole filling etc.. But if I were to do this, lets say on a 16~14 Ga. SS fitting, welded sanitary (inside and out) In your opinion, would there be a huge benefit. I do have the Miller Syncrowave 350 LX Sincerely, an old school metal worker that has not worked with pulse.
@PontusLundhable14 жыл бұрын
Lovely videos, very interesting and wants me want to try a lot of different things when welding! (:
@walterbrunswick14 жыл бұрын
This man should be a professor :)
@ChrisWojnarski5 жыл бұрын
Great video Jody 🔥👊🏻
@2alejandro200814 жыл бұрын
Thanks for the video Jody, first rate as always my friend! (non-ETOPS)
@howardridge1153 Жыл бұрын
awesome , instructions just off to pulse tig two cans together fusion stylie
@yevrahhipstar39028 жыл бұрын
"This is your brain on drugs...." :D
@lowtography6 жыл бұрын
You are awesome! Insane welder
@samr26697 жыл бұрын
Seems that the higher the pulse rate, the more controlled or narrow the weld run is managed - doesn't bleed to the edge /etc, but structurally speaking does the higher or lower pulse rate affect the strength of the weld assuming identical materials? Has that ever been tested?
@markman636 жыл бұрын
Sam R yes, Miller did a study on it. Most welders don’t know how to use pulsing and most videos are misinformation. www.millerwelds.com/resources/article-library/superior-for-stainless-highspeed-pulsed-gtaw-boosts-productivity-quality-while-reducing-distortion
@adrienalvarado98885 жыл бұрын
What are some suggestions for welding 4” stainless steel piping As far as pulse welding the root, fill and cap
@Justinofalltrades114 жыл бұрын
its seems like tig welding produces less heat since the welds aren't glowing after you stop welding, is that true?
@formeitwastuesday.15155 жыл бұрын
Have you done 100% penetration on stainless with pulse?
@freedomjustice19118 жыл бұрын
Thank you!
@johnnymissfire32886 жыл бұрын
Great stuff!
@martinjoseph702911 жыл бұрын
Jody can you do a video on the advance pulse of the Everlast 210ext?
@juliomoreno48609 жыл бұрын
Buenos videos
@dtrrtd7747 жыл бұрын
What does one pulse per second do to auto darkening welding lenses? are they going to constantly be cycling on and off? Should that let you keep better track of what's going on by seeing the surroundings during the weld?
@fredalmond91307 жыл бұрын
On most(?) helmets you can set how long the helmet stays dark after the arc goes out. At least that is what I adjusted on my helmet getting ready to pulse weld with my everlast welder.
@TheGustavoramos7 жыл бұрын
DTR RTD the lens not going to cycle on and off. Using a pulse means the amperage peaks and drops to whatever you set it on. The arc didn't actually stop and start every second
@dtrrtd7747 жыл бұрын
TheGustavoramos makes sense, the arc current just drops to a low value but doesn't actually stop the arc, so the lens remains on the full time.
@TheGustavoramos7 жыл бұрын
DTR RTD yea personally I don't trust auto darkening but I know some of them are good and sensitive that even grinding will make them dim. So you should be good
@Roensmusic5 жыл бұрын
good teacher
@16vastraturbo13 жыл бұрын
can you do a video on the best methods to weld 1.6mm stainless steel tube.... :-)
@16vastraturbo12 жыл бұрын
the problem ive been having with leaving the rod in the puddle is that the end just keeps balling up, how can i prevent this.
@jaysen22006 жыл бұрын
16vastraturbo less torch angle
@jj973912 жыл бұрын
Cool ...very informative,Thanks
@Llepsdog14 жыл бұрын
I only ever use the pulser on super thin stainless like .20 thick.
@stevefriedlander70537 жыл бұрын
Unrelated to Pulse when you weld each side is it better to go part way around the corner before stopping? It would seem stopping at the corners then restarting the next side could create a weak spot in the weld. Your thoughts?
@aleshraaf12 жыл бұрын
@16vastraturbo I have the same problem!
@ralph99875 жыл бұрын
can you use dc pulse instead of ac for aluminium? thanks
@maisummarceneiroumdemuitos80374 жыл бұрын
Don't work.
@tabre11 жыл бұрын
I know man I was laughing my ass off at that one.
@motooilermotooiler95975 жыл бұрын
Now that was some time ago:)
@10000rambos8 жыл бұрын
At work, they make us pulse at 4.4 pps. I thought I was going to have a seizure last night.
@creedsc13996 жыл бұрын
Damn that slow pulse was annoying ))
@g__wizz7 жыл бұрын
pulsing is cheating unless done with the pedal.
@thatgoodnutt67646 жыл бұрын
g zimmermann how
@JesseWright686 жыл бұрын
Whatever, dude.
@Helikopterpop9 жыл бұрын
I wonder one thing. Pulsing in the DC mode has a high current and a background current which gives an average of current between high and low current setting. But how about AC when the balance only goes between negative and positive, then the current on the readout is more accurate right? So for instance, if I weld on ac mode and some chart says I have to go for 120 amps, then I just set the readout on 120 right? And If I were to weld DC with a chart value of 120 amps and chose to use pulsing with a low background current, like your 33%, then I have to crank up to maybe 170 (well, more then 120 to higher the average against the recommended 120A)? And last, and most important question for me, in AC mode, I know I can set my balance which vary cleaning, and also frequenzie which alters how often to switch phase, BUT as in the DC mode with background current and that type of mode with pulsing, will turning on those knobs affect the AC mode welding too? Or is it just balance, amps and pulsing, those three things that is relevant in AC, so no background current and such? Phew, that was hard to explain, I'm a swed. =) Btw you could maybe do a video on that too, that explains the very difference between AC and DC pulsation settings.
@goood667314 жыл бұрын
I like to use pulse welding
@pushya100812 жыл бұрын
The way you introduced this video I thought you were going to connect the pulse rate to the types of metals you could weld, but you didn't. The video leaves me with the impression that the pulse rate you selected was pretty much a matter of your personal preference or choice, but I don't really believe that. Is that true?
@metalslingr6 жыл бұрын
Awesome commentary. Great arc shots!
@adysdelicias14656 жыл бұрын
Do this on thin ss sheet metal and tubeing
@stevesanders39925 жыл бұрын
My welder gets up to 300 pps , when would I use this?
@maisummarceneiroumdemuitos80374 жыл бұрын
To get a really narrow weld bed.
@davidrichards863910 жыл бұрын
Once you go above a pulse frequency of 20 -30 Hz in manual welding you have no benefit, you may as well have the arc continuous.
@prestonjohnston42949 жыл бұрын
actually, higher frequency GTA welding helps not only agitate the puddle and excite the carbon lattice, (for carbon steels), but aids in fusion, HAZ, and puddle control.