TIG Welding & TIG Brazing

[@rsz90182]

I started welding after seeing Jody's first videos. I now have 4 welders past 6 years. He inspired many.

[@ralphwaters8905]

I got overconfident (See the Dunning-Kruger Effect) and offered to do a repair job for my neighbor that needed me to attach the edge of some thin perforated sheet steel to the side of some heavy wall square tubing in a T joint. I could NOT get enough heat on the tubing to even start a puddle without eating up the thin perf sheet. Silicon bronze saved my day, it did. I only had some on hand because I saw one of your videos like this one and decided I should stock that filler. Thanks for saving my reputation!

[@RollingEasy]

I'm 73yrs old. I'm just going to say one thing. This Man is Good.

[@dgcaresolutions7479]

For me the best amazing teacher, honest not show of, and he can weld any material

[@jonowigz8242]

Best Arc Shots I have seen to date. Helpful. Thank you Jody.

[@WilliamDumoreGlobz]

The details & phrases that you use make it super easy to learn . Keep it up. Weld done!

[@Jessewren1968]

A great and timely video, Jody. I'm in the process of TIG welding up some work tables using 16 ga. tubing and ER70-S2 to keep from blowing up the thin-wall tubing.

[@rajincajingt]

Always helpful for a refresh before a new project. Thanks Jody.

[@bigblocklawyer]

SB is a lifesaver on old car restoration. Plenty strong for sheetmetal repair, keeps heat way down and shaves off with a Vixen file so not a lot of aggresive grinding which generates heat. Usually final dress with a flat file gets it zeroed in.

[@leonardpearlman4017]

Got to love the Heat-Affected-Zone comparison at 7:31! This is of course what we're expecting, but it's good to see it. I've done this process now on some little coupons and it worked fine, haven't actually made anything with it yet. This sixteen gauge square tubing (and sheet) is a big issue locally.

[@CrayFishHandMade]

Thanks Jodi always a pleasure learning from your supper knowledge & educational videos on your channel here 👍🏾 Many many thanks from South Africa 🇿🇦

[@brentscottbrent1]

Don't forget to tell the students to clean their filler rod. There's a large surface area on a cylindrical object. No need to introduce contaminants on the filler rod.

[@vanmann8347]

Your videos are always very informative. Thanks for posting them.

[@TheNicko773]

Very nice. I will be ordering my Arsenal kit for #17 with the next few days.

[@kevinreardon2558]

Wow. I'll never get to this point in welding skill. But its so nice to see what it really takes to produce a fine weld (or even braze) it will improve my POS welding without a doubt.

[@christhenademan13]

Just "learned" this welding type today. I absolutely love it. I still suck bad but it is so much fun.

[@6at32off]

Amazing, you sir have talent and an ability to teach. Thank you. I'm just getting back into this after almost 30 years away from any Tig Torch. A lot has changed for me and the tech now is a lot to take in. Just bought a new Miller 215, it does not have all the fancy pulse control etc but I'm sure it will do fine for my current needs. I have a 69 Mustang waiting for my skills to build....watch one of your vids....go practice...watch it again... go practice and repeat as necessary.

[@X0X0LFertilizer]

P

[@javierosuna8521]

Hola. Me puedes decir que tipo de máquina usas porque el vídeo muestra que puedes soldar bronce y acero al carbón meninteresa

[@lindaberringerpatterson4084]

AWESOME THANKS FOR SENDING THIS OVER. GOOD TO KNOW.

[@Odessa45]

The clear cups are just great!

[@hybrid57]

this video motivates me to stride to be one of the best thank you for the tips!👏

[@r.sanchez1406]

don't you ship to spain?

[@audiokees4045]

I did once use gas from a mig, but this did meld the wolfram pin quickly

[@jeffpoplin4913]

Hello im jeff p I love your videos but I haven't found a video on cold welding and what all kinds of metals can you use that tipe of welder on or can you do the same kind of welding with a a/c d/c tig ??? Can you let me no or if you have already done a video on this send me the lenk thank you so much for all you do I have lured a lot from you and are an essential to all of us and I have a Eastwood tig 200 ac dc still learning how to TIG weld

[@petertosh8038]

Hey Jody here,let`s do it!!

[@elmusaprivata]

I love your videos and I would like to learn more. You have a video or course in Spanish thanks.

[@TheBikerDodge]

very informative, thanks for posting

[@brentbinag21]

Your welds are therapeutic jody. Thanks for de-stressing 👍

[@AB-yu2tj]

Hello Sir. thank you very much for all your good advice. I love welding and welding machines. I have a question. How do you deal with breathing while welding? I don't mean the filtration and or clean air intakes......etc. I mean the rhythm of breathing. I find I'm holding my breath and then I slowly Miss up as I start breathing. And if I'm not holding my breath my hand move too much. It's like when you shoot a gun you have to hold your breath when you're aiming I guess

[@ledinhanh]

nice video

[@hart-lessperformance8653]

Perfect timing. I've been banging my head off some thin wall tubing with the issues you mentioned (burning through/bringing contaminants forward). I'll try the lay wire technique with thicker filler tomorrow. Thanks!

[@viorelionescu8411]

please tell me what type (brand) of welding machine do you use? thank you

[@mkm9943]

Great video as always! Can you please do a video on what it would look like if you ground down and finished one of those brazed joints? I am interested in more TIG braze videos. Thanks Jody!

[@markalbrecht2444]

What's the best Tig machine to try to learn to Tig weld with ? Keeping price in mind . Thank you ! Love your show!

[@neonshark6972]

Jody is the God of Welding

[@phalkoni]

Can you braze without having pulse on your machine or is it a must have requirement

[@EchoSixMike]

Very nice, I'm going to apply this to welding out headers.

[@TheOneAndOnlySame]

I have the hardest of times not making a tiny melted puddle of base metal while having enough heat for the SiB to flow I get it that the arc is to be focused on the puddle not on the base metal .. but I find that the bronze won't flow if the base metal is cold?

[@SteadArcFab_Ministries]

Thanks Jody, great video man! The new kits look like a great deal to have. Be blessed!

[@negovei1]

Thanks for the video ! What is the purpose of the cup size?

[@negovei1]

What is the cheapest set up that you can buy for the DIY guy to get "professional" results? Thanks

[@unikels]

Hola, se peude soldar aluminio con el proceso TIG, sin aporte y sin gas?, solo con la fusión de la antorcha de TIG? en espesores muy delgados? Saludos.

[@firefighter440]

What machine are you using here sir?

[@CUBETechie]

But if you use clamping is it necessary to worry about the pull? I worked in my apprenticeship mostly with MIG MAG and use 30x30mm square tube with 2,5 or 3mm thick wall. What grinding disc do you used in this video? Why do you use the pulsing for bras and what does it mean when it puls? How can it be described? Something like the tacking operation?

[@neiltibbs648]

Love the videos you never stop learning 👍

[@stcfabworx1687]

Looking good flowing that honey! Thanks for that video Jody! I always look forward to your videos! Top notch!!

[@Goupbusiness]

Thank you for all the video you upload and help us to have more knowledge about welding

[@geraldstarr9950]

These videos sooth my mind after the trauma of my crappy arc welding. Pay attention brain, no more rabbit dropping welds!

[@bostedtap8399]

Good tip on pulsing Silicon Bronze. Thanks for sharing.

[@tommy230586]

How can i buy this kit?

[@creativeskills777]

Well explained. Thanks Jody

[@michaelfeathergill7556]

if you point you tungsten at the solid wall instead of the cut end on those t joints you dont get those blowouts. its not a heat problem its your position.

[@2121farid]

What is the model of welding machine?

[@ffracaroli]

Is it possible to braze a tungsten carbide tip on a steel tool using tig welding? Would you please make a video about it? Thank you.

[@razalibakri3782]

I want to ask if all types of metal can be connected using TIG welder

[@luciusirving5926]

Fused? Why yes, but steel and aluminum will be your most common workpieces.

[@নীলআকাশ-ল৫ন]

Sir very very nice

[@rajpolekar4789]

Wich gas use sir branze

[@XXCLOUXX]

Hi can welding any steel?

[@jeffgrier8488]

Great video as always, I learn something new every time!

[@mrlemos8405]

Good welding

[@ixoc07]

*_CONGRATULATIONS MAN, VERY GOOD._*

[@ianjoseph145]

Jody great video thank you. Can you do a video on cold welding. Looks similar to tig pulse. Thank you.

[@thrasher4219]

Thanks so freaking much!!!!! Just starting to learn how to Tig!

[@FrancisoDoncona]

“In the puddle”, are you dipping the tip in the fluid making contact or you mean something else?

[@naoufelmelayh240]

hi sir thanks for video , very instructive ; some questions help for you please - need to buy tig pulse , or double pulse , not expensive price , and try the silicone bronze on stainless ,and aluminium metal mainly - is silicone bronze available for tig welding , on sheet metal , and aluminium ? my objectif is to weld fastly with tig and less power current , that"s why the silicone bronze filler could be the solution where to order for this equipments thanks advise

[@janes-e378]

Thankyou for your help

[@valcic1993]

Hello, can you recomand what tig filer is for magnesium

[@silvestrecruz6007]

Hace muchos años solde con gas argon y fue una experiencia muy grata ojala y mi dios me de licencia para volveer hacerlo,, saludos desde Oaxaca, Mexico.

[@KennyInVegas]

Man...... I REALLY missed watching your videos! Too much outdoor activities lately. I like that kit you built up for sale. Thanks for GREAT videos........ I really like that silicon bronze brazing. Gbyay!!!!

[@elwinduncan909]

Great videos. I have a question, should you need to place an Aluminum or SS plate under your aluminum work peace when you welding on a steel table?

[@MF-nw9hf]

Hello Maestro :) do have a video that is about Pipes on flats? Like this: lo

[@wjim5510]

Great video, tutorial and editing 👍👍

[@michaelmexx100]

Hey friend! How do you start ..?? 2takt? 4takt?? You work with food panel???

[@abhishekjoshi4534]

can we do tig brazing for brass?

[@gianlucaiannetta3458]

Hi Jody, with this welding technique and with the type of coating used is it possible to combine aluminum trays with a radiant copper mass? Thanks in advance for the reply. Greetings Gianluca

[@viorelionescu8411]

how many mm should the welding electrode be, and what type or brand? thank

[@BerlietGBC]

Always good to see you movies , always learn something new thank you

[@rupertgreen2459]

Hi Jody - I’m having trouble welding 2mm wall Mild steel tube to 1.8 mm plate. Weld is fine but the plate is puckering on the other side of the weld, and I can’t grind to blend out on that surface. Any tips?

[@Юра-р3с]

Уменьшить ток если нужен провар на всю глубину используй поддув с обратной стороны

[@jessicaarverne1181]

Now I know what TIG is. Thank you.

[@MrStupidactivities]

Just ordered my TIG finger! Save my pinkie!!!

[@luciusirving5926]

Welding is the best for butt joints. Brazing is weaker than riveting or bolting on heavier gauge metal.

[@rjbubba4335]

Hi I'm new to TIG have been trying to learn from You tube, I hear 1 instructor saying don't put the wire in the puddle but I see you did and it works good so what should I do?

[@Anderson-ch]

Awesome !

[@randypennington4968]

Awesome instructions ,!!!!

[@ChrisWojnarski]

Thanks for the awesome video Jody I’m sure he put a lot of hard work into it you the man Jody

[@NTGInnovations]

You´re doing great stuff!! :) How do you film the welding process without strips in the camera display because of HF or pulse?

[@mdparvezhossain5264]

drop so how do you do up..... how do you drop making...

[@steveh9106]

Hi Jody, great video thanks, could you tell me the spec of the phosphor bronze rod please, I tried to TIG braze today and it looked bad, all hissy n all, thanks from the UK

[@Newfive]

Thanks again for video Jody... touching on subjects that I have not use in years but brings back info... (Thumbs UP) < HINT: if you doing lots of tig... GET BIG BOTTLES... you will use lots of gas>

[@danl.4743]

What are the practical differences between the ER70-S2 and the ER70-S6 when it comes to thin wall tubing? Any one is preferable to the other, and for what reasons? Thanks.

[@Sicktrickintuner]

Dan L. Probably go s2 as there is less mill scale on tubing.

[@adelazizkech8837]

Instructive video as always. Thanks a lot.

[@davidcolquitt9981]

Always learning with your videos!! Thank you so much!!

[@BISHOPSAGODCHASER]

Mr J. Would you plz give me the episode # for DC brass tig? I’m running a 56 shorty (short hood) Thank You 🙏🏽

[@wilsonsilva3775]

Eu aprecio sou um apaixonado por solda

[@gorgehail6257]

hi i would like to start welding aluminum. I bought a cheap TIG welder for a start, but I can't dissolve aluminum beautifully, which can be wrong

[@ВиталийШевчук-й8ц]

Круто. Я бы к такому мастеру пошёл бы учиться!

[@steelcitytv7468]

Can u do a tutorial on welding a single bevel butt joint in 1g, 2g,3g, 4g?

Good job 👍🏻👍🏻

[@MarkATrombley]

At 1:45 you show the word "Title". Is that intentional or a place holder?

[@riglenduwaer3587]

I like your video my friend , you show every thing you now

[@deepinuranus3433]

I'm having trouble with tig brazing. Don't know what I'm doing wrong, got alumibronze and silicon bronze. Obviously need ac on alum but can't get the Silicon bronze to behave on DC. Just looks a mess.