Close your eyes and you can almost hear Ray Romano. Love the channel!
@gozer95564 жыл бұрын
Dude I was just about to comment "Everybody loves Raymond!!" lol
@codeblue274 жыл бұрын
I couldn't put my finger on it, I just like thought it was RR. :)
@dguyiop84 жыл бұрын
If you open your eyes you'll see a guy that looks nothing like Ray Romano.
@daveg42364 жыл бұрын
dguyiop8 mind...blown 😂
@roamingboss73393 жыл бұрын
Too funny!!! bahahah This comment had me rolling as I tried it!
@taboy1227974 жыл бұрын
I'm building my first telecaster and have searched all over the place for wiring information. By far the most informative video I've seen yet. You simplified the whole process. Great video!
@joecraven20343 жыл бұрын
Ditto!
@ltlauch6 жыл бұрын
Why am I even watching this? I've done this a million times. His voice is so calming tho...
@timsway6 жыл бұрын
hahah! I have a voice for KZbin and a face for radio :)
@7884golfguru4 жыл бұрын
Tom Schulte good for us learners though
@non_brewed_condiment3 жыл бұрын
Hey man, this was a great video. I'm just getting started doing my own guitar mods so I've been watching quite a few videos like this. The way you explained this really helped me a lot, there were a couple things that weren't quite clicking for me but you explained them in a way that helped me understand everything much better. Thank you!
@coastlineleathergoods23 күн бұрын
My parents bought me a kit guitar with no instructions. Lol. This video just saved me. Thanks you!
@beccalynn44414 жыл бұрын
You’re a life saver! I’m making 2 guitars for a class and one needs wiring. Naturally, I had no idea how to do this and you made it super easy to understand! Absolutely wonderful tutorial
@beccalynn44414 жыл бұрын
Kurt Cobain ?
@nathanielyeater9884 Жыл бұрын
Same man, getting ready to build one in my senior high shop class, but I know next to nothing about electronics.
@user-xo2vo6uk9l8 ай бұрын
I need help
@nw84884 жыл бұрын
i love the way you re-use and re-claim. nothing beats that imo. yyou must have the most interesting guitar collection! cheers!
@timsway4 жыл бұрын
thanks! I try to sell them, tho, not collect them :) newperspectivesmusic.com
@robertbernardo783 Жыл бұрын
I'm new to wiring and I find your video clear and fun to watch. Thanks!
@VanishedPNW2 ай бұрын
Much more capable than you freely admit, and youre genuine in the way you present yourself, very endearing. People always like a person who seems capable but who admits they dont know everything about everything, which is intimidating, and makes people a little nervous and shy because we are then faced with the fact that we dont know anything. Lol. Why Im saying all this, who knows. Good video, great approach, excited to see whatever you do next.
@timsway2 ай бұрын
cheers. Indeed, "the more I learn, the less I know" and I make these videos to encourage people to try to do things themselves rather than feel there is some sort of invisible "knowledge block" with expert gatekeepers. Been making videos for over a decade. enjoy!
@aaron68412 жыл бұрын
Plumbing solder has very harsh flux that can damage your components
@pavlepaja7642 Жыл бұрын
Finally some good video about soldering and logic behind wiring. Thanks man 😊
@MemoGGG16 Жыл бұрын
Second person I heard talking about the word solder while soldering... I loved the tutorial. Thanks!
@bobcorl87363 жыл бұрын
Thank you, Tim. I'm wiring my first electric guitar and this video was easy to follow.
@scriptureexamined46644 жыл бұрын
Thank you very much! You were the first guy who could tell me about grounding the bridge.
@mc4kvb6 жыл бұрын
“Pokery thing” is the best! I have to disagree with you son....you DO know what your talking about. You haven’t built as many guitars as you have and not know what your doing. I appreciate all your videos and enjoy watching all you do. Thanks Tim...great video, great job!!
@timsway6 жыл бұрын
Becky's Texas Wood Shop thank you! What I mean by I don't know what I'm doing is there is a LOT more that can be accomplished with and added to the electronics part of guitars that I don't know about. Like I'm pretty good at addition and su traction but suck at calculus, so I can't say I know a lot about math )
@mc4kvb6 жыл бұрын
tim sway I totally understand what you mean. To me you are so way, way ahead of what I understand. I’m just being honest that you are very talented and know a lot about a lot of things. I’m 65 and don’t have a great education BUT I have tons of common sense and that has,gotten me Thur life. I use my head and think before I react and that is how I approach my builds. I’m basically self taught but wish I knew more. I learn everyday and that’s a good thing. I always love your videos bc you explain them very well. Thank you for that. Be safe son.
@timsway6 жыл бұрын
thank you very much! I'm self taught, too, which I look at as a benefit more than a hinderance: fewer preconceived notions of how I'm "supposed" to be doing things :)
@lect0n72 жыл бұрын
Okay, I’m second-generation lead guitarist/amp tech who works as an electrical engineer, I have a M.S. in Electrical Engineering. Audio Taper 250K (also known as A250K) for Volume Pot with a Single Coil setup, Linear Taper 250K (or _B250K)_ for tone pot with single coil pickups. Now, a humbucker is one single coil pickup half-wound one way, & another single coil pickup half-wound the opposite way, then they’re half wound together… the reverse-winding puts them out of phase which _’Bucks the Hum’ (so-to-speak)_ that being said, it’s two pickups which would normally be outfitted with 250K pots wound together & therefore a 500K is necessary. Sound decibels are on a logarithmic scale so, ideally Volume pots should be _Audio Taper (Logarithmic Taper)_ or _A250K/A500K_ They’re adjusting sound volume & sound decibels are *not linear* (like volume bars on a television) Sound decibels are a representation of Amplitude, which is the relative strength of sound waves (transmitted vibrations), which we perceive as loudness or volume. Decibels (dB), refer to the sound pressure level or intensity. Now, if a 500K Potentiometer is used in an exclusively single coil setup, all the audible change will all happen between numbers 1 & 4 (using a traditional numbered volume knob for this example). And I’m not saying a linear taper pots won’t or can’t work for volume control, I’m just saying an _Audio Taper_ pots do it better… now, with tone control, the scale is linear & there’s a bit of deviation in tone pots; which are _Linear Taper_ because tone level is measured on a linear scale…however, there is some deviations which exist; like the _Fender TBX Tone Control_ is a 250K stacked pot _Treble/Bass Expander_ I’ve heard it can be configured to totally cut treble in one direction or totally cut bass in the opposite direction… it’s got a _No-Load_ Detented Center Position which measured 1K _(a true 1-Meg Pot measures 10K)_
@samichpower Жыл бұрын
This is fantastic! You make it seem so easy for someone like me who knows next to nothing about wiring (I had to google what grounding meant lol). Thanks for this
@timsway Жыл бұрын
Like welding, woodworking, etc., there is soooooo much more to soldering and electrical work than I get in to here, but what I can't stand are people who "gatekeep" that information. This won't teach you all the finer points of electricity but as long as you don't try to rewire your clothes dryer like this and stick to low volt guitars, you'll be ok :)
@onemanaftermath77110 ай бұрын
Excellent Video! Walked me right through the process. Thank you!
@garagemonkeysan6 жыл бұрын
Boy, I haven't seen that banded colored wire in decades! Brings back some memories. Thanks for sharing! : )
@timsway6 жыл бұрын
70s vintage!
@donaldscheer520611 ай бұрын
Excellent Video! I Have A Humbucker That Also Has The Green Wire As The Hot Wire & Black As The Ground! That Can Be Confusing Because Other Humbuckers Have The Green For Ground & Black For Hot! Thank You! You Got Right To The Point! Well Done!
@walther91617 ай бұрын
The cooling probe or heat sync tool is a great idea!
@expediant1215 жыл бұрын
I'm about the re-wire my guitar came across your Video. Sodder on! thanks TIM.
@jgclark456 жыл бұрын
I think in the USA we say sodder, in Europe they say solder
@timsway6 жыл бұрын
that seems to be the consensus.
@markgowans5 жыл бұрын
@@timsway I believe every US state says sodder but here in the uk its Solder. Its a bit like Tom ate oh vs Tom at oh. Everyone knows what you really mean. Language is a strange thing at the end of the day lol
@Jimmie164 жыл бұрын
Check the spelling then pronounce it like the American Footballer.
@paulmullins48613 жыл бұрын
In eastern Kentucky, we call it sorder. The rest of the state, it's sodder.
@BigFatCaulk3 жыл бұрын
@@markgowans i say it like “souder
@jimbola773 жыл бұрын
Thanks man really good video I followed you now my guitar is back to life!!!!
@LillySchwartz4 жыл бұрын
Great informative video, thanks for making this! Just one thing I noticed: The way you were talking about how you do the shielding sounds like it isn’t really effective. It doesn’t really matter so much for your humbuckers, but if you ever want to coil split them, you’ll need a faraday cage to make it effective. It needs to be closed off on all sides. Shielding just the pickguard won’t be enough. Maybe you meant it that way anyway though.
@BOBANDVEG3 жыл бұрын
Dude.......you answered all my q in like 3 min. Thank you
@JimDockrellWatertone6 жыл бұрын
Good one Tim. A couple of tips if you wish. Seymour Duncan's website has tons of wiring diagrams. Heat shrink tubing is cheap and works better than tape, and try tinning your wires instead of your lugs, you may find it easier.
@timsway6 жыл бұрын
excellent tips. thank you. I know the heat shrink is way better, I just don't have any and keep forgetting to get it. :-p I was taught to tin both the wire AND the lugs, but have gotten a little lazy I suppose.
@JimDockrellWatertone6 жыл бұрын
Happy to help. Your guitar builds are cool, and your playing too.
@asslord Жыл бұрын
Thank you for the very informative and helpful video!
@markbrown92163 жыл бұрын
That was strangely relaxing, especially with the tick tock of the clock in the background.
@mns87324 жыл бұрын
You're a natural teacher. But I think I'll learn how to string my guitar before attempting installing a new pickup
@37BopCity5 ай бұрын
Great video for beginners and people wanting to learn more. At first it's like rocket science, then it becomes a lot easier to understand. Basic guitar and amp wiring is a fascinating subject and a great thing to know and understand. Advanced electronics, however, really is rocket science!
@samaker46 жыл бұрын
That hold down tool of yours is a great Idea Tim.
@timsway6 жыл бұрын
That and the heat shield came with a soldering iron I bought years ago. The iron is dead but those tools are super useful.
@ashersolomon95604 жыл бұрын
Excellent video! However I heard that you were only supposed to heat your solder up once in order to bond the flux to your wires. If you re-heat already bonded solder it won’t have as much flux in the next bond
@Charlie-ov1bj4 жыл бұрын
The best one ive seen yet... It would be nice if u showed us the switching part though this guitar dont need one
@timsway4 жыл бұрын
For 3-way switches if you had two pickups you would run the positive lead of one pickup to one side of the switch, and the second to the other. the middle pole of the switch would then go in to the rest of the wiring just like the one pickup lead wire does in this video. you would also have a ground wire tab on the switch.
@jpkalishek45866 жыл бұрын
It's late and I should be in bed. wait. a Sway vid tomorrow is Saturday, *click*
@miloellis1914 жыл бұрын
My current time is 4:11am I feel you bro
@brandonkreinhop3594 жыл бұрын
Best tutorial I've seen so far. Thank you! Plus, that pickguard looks so badass!
@AkiraSatsujinki4 жыл бұрын
That's actually surprisingly simple! I'd had this idea to make a solderless guitar wiring system so that you don't have to solder when changing new pickups. I'd heard that it's just simply dropping a couple of terminal boards, but I'm not sure how it works. Maybe it could be a future video idea if you think you could give it a shot? Thanks in advance!
@timsway4 жыл бұрын
They sell pre wired kits like that you can clip together. Soldering takes a little practice to get used to but it is not difficult. Cheers!
@webingerphoto494 жыл бұрын
Excellent video for guitar wiring for this newbie! Going to use it on Cigar Box Guitars ( CBG ).
@keithhampton9700 Жыл бұрын
Very cool guitar! Thanks for your knowledge 🤠
@jonasulfsfalt44514 ай бұрын
Thank you for this video Brother! Great one, easy to understand and I did my wiring an solder quick after you teached me. Thanx! Just wonder, what is the value of the capasator you use here? Kind regards from Jonas in Sweden!
@timsway3 ай бұрын
I believe I used a .047.
@jensine.ondrums3 жыл бұрын
Thank you for the video!
@theloniouslinford2836 жыл бұрын
Thank you for finally doing this video, it is super helpful!
@timsway6 жыл бұрын
cheers! sorry it took so long.
@beyondmywildestdreams6942 Жыл бұрын
Awesome video, thank you very much for making it.
@philgallagher15 жыл бұрын
Great video, Tim 👍. It's good to see (like in all your videos), a "real world" application of the theory. Most other channels will explain what to do, then jump-cut to a perfectly executed final product, often leaving most people more confused than before watching the vid 😬. I find with your vids you get your message across by showing us how to do it not just telling us. It makes the info stick much more better! (See my comments below on language!) 😈. Give a man a fish..... Also, yes I agree with what most people say....in the USA, you say "sodder" and "aluminum" etc, while we in the UK pronounce our words correctly!! (LOL!!) Seriously though, I don't think it matters so long as we all understand what the words mean, regardless of what you people have done to our beautiful language!!! Hahaha!!
@timsway5 жыл бұрын
haha! thanks for the kind words. I gotta tell ya, my grandfather's Boston accent was so thick I couldn't understand a word he said - and the same could be said for a few accents I've heard from UK regions. Here in Connecticut, however, we have no accent and speak English perfectly :)
@philgallagher15 жыл бұрын
@@timsway Haha! I'm sure you'd struggle with my Liverpool accent! What I find strange is that the UK is smaller than most STATES, yet the difference between accents is remarkable! Even in CITIES we have differences in the accent which others probably wouldn't hear. A good example is the Liverpool accent itself. You probably wouldn't notice, but the North accent (say Ringo) is very different to the South (say John or George) and they are both different to the mid accent (say Paul). However if you drive just 30 miles you come to Manchester and get the Gallagher brothers of Oasis fame (no relation sadly!!). Their accents are very different to mine. Another 60 miles brings you to Birmingham. They again have numerous accents in a small area (think about the differences between say Robert Plant and Ozzy Osbourne!) That's a very small indication of the differences. SIX famous musicians raised within 90 miles of each other, each with very different accents. (Don't even get me onto Welsh, Scottish or Irish!!!)
@timsway5 жыл бұрын
@@philgallagher1 Each state of the NEW England region I live in (Maine, Vermont, New Hampshire, Massachusetts, Connecticut, Rhode Island) has very different accents - with some regional accents within regions. But to someone from California we all sound the same.
@philgallagher15 жыл бұрын
@@timsway Yeah. As I said earlier, so long as we all understand each other I think the diversity is what makes the world go around! I also prefer to hear singers using their own regional accents. You probably don't hear it, but so many British singers try to emulate a generic American accent. This mix of them trying to sing with two accents at the same time becomes what we call a "Mid-lantic' accent...neither one thing nor the other. Happily this seems to be dying off now and regional accents are making a welcome comeback!
@daveyboy89072 жыл бұрын
@@philgallagher1 thanks for the accent lesson guys. I have 4 states surrounding me and we all have different accents..Hell I have a different accent than my own neighbors..lol take care
@mikechecka2928 ай бұрын
When shielding,you need to use conductive adhesive with foil or copper if you dont use shielding tape specificall,y for guitar.
@timsway8 ай бұрын
correct. As explained in this video, the pickguard I 'm using is made of aluminum, thus no additional shielding tape was required
@dalemullen96 Жыл бұрын
Perhaps the size/gauge of the appropriate wire should be included in the video. Also, how does one know which tabs on the potentiometers go to what? Note: You are correct in that the "l" is not pronounced in "solder".
@timsway Жыл бұрын
I don't think the gauge is all that important as I've seen various gauges and styles of wire used in guitars and they all work. The outer tabs on pots are like cold and hot, or on and off, interchangeably and the middle one is where the signal is. So if you ground one side and send your signal into the other, the one in the middle will send the signal you dial in. On to the signal side, off to the grounded side and all points in between.
@dalemullen96 Жыл бұрын
Tim: Thank you very much for the timely and informative reply. Does one of the tabs always have to be grounded? @@timsway
@jiffey_faux2 жыл бұрын
We pronounce it "sodder" down here in Texas as well!
@mrramz136 жыл бұрын
Mr.Sway, After extensive research.... OK, 2 minutes reading comments. I say it's pronounced "welding".
@timsway6 жыл бұрын
Mr Ramz hahaha! Obviously...
@JackieSunshineOmega Жыл бұрын
Aluminum tape works well too! :)
@donaldscheer520611 ай бұрын
I've Waited For A Few Weeks Now Trying To Sort Out That Hot Green Wire & Ground Black Wire ?....Thank!
@Otisjames5692 жыл бұрын
Thanks great vid. Helped me out.
@steveparkes4 жыл бұрын
I regular post on a video that mentions copper tape. It's a pound a roll at Poundland in the UK in the gardening section. A bargain.
@timsway4 жыл бұрын
that's super cheap!
@JB-bc9nm3 жыл бұрын
BTW you're saying it correctly. Solder=SOD-ER. Thanks for the video!
@ralphorlando82796 жыл бұрын
Best tutorial on youtube.
@michaeld271611 ай бұрын
Thank you.
@bearshield7138 Жыл бұрын
Thank you
@scottfisher39483 жыл бұрын
nice video easy to understand.
@FirestormAudio5 жыл бұрын
Great video. I don’t have any spare wire on hand because I’m about to try this for the first time. Any recommendation on where I can buy wire and what gauge to use?
@timsway5 жыл бұрын
Cheers. Where I live there are no more radio shacks. You could try an auto parts store and look for the lightest gauge available - or cut open a pinball machine :)
@markkicksass24482 жыл бұрын
Well done! Thank you
@lindaaustin-morin77817 ай бұрын
Shout out from Massachusetts!!! 2024
@singinalex522 жыл бұрын
Awesome!
@robertshorthill6836 Жыл бұрын
Don't use black electrical tape. Use heat shrink instead. You will glad you did in about 4 or 5 years.
@timsway Жыл бұрын
since filming this I bought a big old kit full of those they are nice.
@MrMetalv73 жыл бұрын
Great video.
@kazunobunazaki71415 жыл бұрын
Thanks for this tutorial tim,keep on rocking!
@saul35212 жыл бұрын
Everybody loves Tim
@vasco2109 Жыл бұрын
thx for this video! one question which leader do you solder the capacitor to the ground when it doesn't have any indication what is the positive or negative?
@timsway Жыл бұрын
with some larger capacitors and other electrical components, direction is important, but with these little guys it doesn't matter.
@pyntaman-74102 жыл бұрын
hello, mine stopped working and i tried to fix it but failed, i dont know how to do it, seems really difficult for me, there are 3 wires coming from each pickup (red, black, green) and a yellow cable that goes to the plug; to make it simpler, could i connect those directly to the plug without the tone and volume knots and it would work? thanks a lot
@timsway2 жыл бұрын
yea. that's a good way to trouble shoot. start by connecting two wires directly to output and see if you can gert sound. then work backwards. you can also test the pickup with an ohm meter if you have one, to see if it's showing resistance (working)
@DandinXY3 жыл бұрын
Awesome, thank you
@Suupine7 ай бұрын
Copper makes sense because of it being the 2nd most conductive metal
@fatfro13 жыл бұрын
I appreciate the fact that you use repurposed wire. If you used shielded wire where would you use it specifically? Just the hot and not for ground? Or for everything?
@timsway3 жыл бұрын
I'm not sure I'm qualified to answer that? some pickups come with shielded wire but I've never used it beyond that. I do shield the cavity, however, which is pretty important.
@windward28184 ай бұрын
What value, voltage and type of capacitor did you use? It look like a metal film cap from the video.
@timsway4 ай бұрын
I think this was a NOS soviet cap, .047
@HGXAF4 жыл бұрын
nice work
@andrefornia4 жыл бұрын
Hey, I wanna extend a wire that has a hot and a ground wire in one cable/tube. I have to extend both separately, right? Thank you 🙂
@timsway4 жыл бұрын
Well, they need to be separate wires and can't touch each other, yes. Bit if they are attached and insulated (like lamp cord) that's ok.
@andrefornia4 жыл бұрын
@@timsway thank you for your answer! I figured so 🙁 That makes lengthen it a bit of a pain in the butt, but I have the same problem as you here, the wire of my new neck pickup is way too short.
@pixel_ppl25042 жыл бұрын
Ok so I want to rewire my guitar and there are two humbuckers with three wires coming out, one is ground and one is + and one is - (i think) and i want to rewire it with one tone, one volume, thee way switch and a jack (les paul style) I can't find any diagrams, can you help?
@timsway2 жыл бұрын
Send the pickups to the jack first, one to each side, then take the lead from the middle of the jack and pretend it's the one pickup I used I thos video, follow the rest of the video.
@hydroweapon3 жыл бұрын
My Dean wires somehow just fell away so I need to re-solder them all. Such a pain
@yungplague55343 жыл бұрын
Same with my jackson
@immastranger67523 жыл бұрын
Jeff Goldblum much?! 🤣 instant subscriber
@glytch53 жыл бұрын
you got rid of the plumbing solder.. just got to get rid of the plumbing flux. You want liquid flux colophane. Works waaaay better for electronics, and it wicks into wires and objects. Who told you not to touch the iron to the solder? you want the solder to touch the iron and the spot you are soldering kinda at the same time... thats what I do anyway. You create a ton more heat trying to heat up the area to melt the solder on than to transfer the heat from the iron through the solder!
@timsway3 жыл бұрын
that's exactly why I touch the soldering iron right to it. I'd rather wreck the tip than the project. I don't remember who told me that but I disagree :)
@glytch53 жыл бұрын
@@timsway Yeah! I think whoever told you that was probably referring to the old school way of soldering two twisted pairs of wires together... in a perfect scenario where you can get the wires hot enough to the point of touching the "SODER!" to the wire its self and having it melt through. I say it the way you do as well haha.
@JDGuitar822 жыл бұрын
Is there a demo video of this guitar being played?
@timsway2 жыл бұрын
i think it was this one? This was a long time ago: kzbin.info/www/bejne/fJzZppKAl5VjY7s
@davidkastin42405 жыл бұрын
I put a piece of tape on the end of my screwdriver before doing the tap tap test. Don't want unnecessary marks on the pole pieces
@t436044 жыл бұрын
thanks
@ronnieDshman18 Жыл бұрын
If the wires on your pick up have no colors at all… what do you do?
@timsway Жыл бұрын
There are many types of wire. If the wire looks braided, then that means there is an outer shell that is the ground and inside the ground is another, insulated wire (the +) if it is solid wire that has had all it's outer casing removed, you can tell which chain is positive by following them through the circuit. Anything that is negative will eventually lead to the negative terminal on the 1/4" jack. If you can't tell which is that, they negatives will also terminate onto the outer body housing of the knobs. take your time, follow each wire and they will tell you what they are.
@sapelesteve6 жыл бұрын
Nicely done Tim! Having done that routine, I know what a PITA it can be. I really like that "Poker/Prody/Thingy". I also like how you put a dab of hot glue to hold that wire which I assume gets grounded to the bridge. OH, and your pronunciation of Solder is correct as the "L" is silent. Anyway, great video bud........................... :)
@timsway6 жыл бұрын
Sapele Steve correct in Connecticut, at least. Thanks bud!
@sapelesteve6 жыл бұрын
Just looked Solder up in the dictionary & no matter where you are on the planet, it's still pronounced "So-der" as the "L" is indeed silent. Obviously, people will have a different pronunciation depending on the particular colloquialism of the area. I know, getting nitpicky..................... :)
@timsway6 жыл бұрын
hahaha!
@borneonativetrader91223 жыл бұрын
Just got my new potentiometer today..i replaced the broken one and boom!! No sound at all..it has sound at first but then the sound just like turning on and off..is this might be wire problem? i'm really frustrated..
@timsway3 жыл бұрын
It could be a bad potentiometer, it happens, but more than likely there is a loose or shorting wire somewhere. it is real easy to miss one or have a wire accidentally touching the something it shouldn't. With the instrument plugged in and turned on, poke around in there and see if you can find what's loose or grounding out. You won't get shocked.
@borneonativetrader91223 жыл бұрын
@@timsway thank you sir..you are right, it's the potentiometer that have problem not the wiring😅
@bramabull1114 жыл бұрын
I keep burning or discoloring the pot, all while still getting cold solder joints. I'm not sure if it's my soldering iron getting dirty or not hot enough or maybe not enough lead in my solder, I have done this before not too badly. And this time seems to be off to a rocky start. Not sure what's going on
@timsway4 жыл бұрын
did you scuff the pot with some sandpaper, first? there is usually a thin film on them from manufacturing that makes soldering pretty much impossible without sanding them a little first. You are supposed to use emory cloth but i just use a little piece of 220 or so grit sandpaper.
@bramabull1114 жыл бұрын
@@timsway thanks for the quick reply tim! I was experimenting and / or lazy and used a small flathead to scuff the pot, but I can see how this may have still left an inconsistent surface to adhere to. Next time I solder the back of the pot, I will definitely use the sandpaper as you suggested, not cut that corner ever again, and see if that helps. Thank you. Is lead free solder ok? I've heard different things.
@DanielJAudette2 жыл бұрын
Tim, I see you use wire you have kicking around to wire up your guitars. I have a tonne of old cat 5 wire kicking around. (Computer network wire) its 4 pairs of 24 gauge wire. Do you think it would work well for wiring up the guitar including wires to custom pickups
@timsway2 жыл бұрын
probably?
@WilliamLutesMaker6 жыл бұрын
I lied. Its not too long at all. Well done ❤️👊🏼❤️
@timsway6 жыл бұрын
did you learn anything?
@WilliamLutesMaker6 жыл бұрын
tim sway Its not that I learned anything, its I watched the entire thing and didn’t realize 20 minutes had gone by.
@albertmendoza63903 жыл бұрын
I wish they sold a affordable solder less system for testing pickups
@albertmendoza63903 жыл бұрын
Btw great video
@bradmcclure49454 жыл бұрын
so I'm left wondering about wiring two pots one on the neck and the second for the bridge
@timsway4 жыл бұрын
Search for schematics and it will show you the proper way, then apply what I show in this video to the multiple pots.
@alphacentauriproxima4 жыл бұрын
Thank you. Very helpful.
@wout8106 жыл бұрын
Thank you so much 😀
@josecasarez52285 жыл бұрын
So, I know this video is old but I have a question. What do I do if I have a guitar that doesn't have a tone knob? I have a black squire bullet that I'm piecing together but there's not Tone potentiometer
@timsway5 жыл бұрын
If you want to add a tone knob you can drill a hole and put one in, buy a capacitor and find wiring diagrams online easily. If you want to leave it as is, just bypass the tone knob. look at the schematics, and just cut the tone out of the equation so the lead from the volume goes right to the output jack. Hot wire: pickup to switch (if there is one) to vol knob to output jack. Grounds: make sure they all touch everything.
@pamreed75885 жыл бұрын
Thanks for the help your content is great
@MobileFreedomEnterprise4 жыл бұрын
Wooooowwww!!!! What a beautiful guitar!!!!!
@jakefromkmart Жыл бұрын
whats the heat protector clip thing called i cant find it
@timsway Жыл бұрын
it's called a "heat sink clip" - you don't really need it but it doesn;t hurt. you can also just use an old alligator clip to slow down the heat transfer, too.
@Blackdog48184 жыл бұрын
Are there any videos on reverse polarity on humbucking pickups? I saw the Brian May guitar rundown and he said he had two switches for reversing polarity. Is the sound that different?
@timsway4 жыл бұрын
it is VERY different sounding. did it once by accident and I decided I didn't like it enough to leave it that way. I'm sure there are videos out there with the info you need.
@littlebritain645 жыл бұрын
Thank You!
@timnoble41375 жыл бұрын
'O' as in Soldier. Easy. Good vid, thxs, man.
@neelbanerjee25623 жыл бұрын
Sir can you share the wiring diagram, I really need it
@timsway3 жыл бұрын
just google it what you need. they are all there. www.google.com/search?q=single+pickup+wiring+diagram&client=firefox-b-1-d&sxsrf=ALeKk03cAN-xBrjNeUlZE67R_73-pnOCrQ:1625418034947&source=lnms&tbm=isch&sa=X&ved=2ahUKEwj5zNWE8snxAhUTmmoFHY4nDN8Q_AUoAnoECAEQBA&biw=1345&bih=766
@anonymousperson43634 жыл бұрын
soldering is not like welding. Other than that, I did give it a thumbs up.
@timsway4 жыл бұрын
Welding involves tons of heat and/or force to actually melt two pieces of metal together and usually add filler material to close the bond. This is, on a molecular level, very different from soldering. However, in soldering we're using heat and melting a filler material to join two pieces of metal together, which has many similarities. This is soldering 101, not 301 :)
@gnutscha3 жыл бұрын
Hey, i have made everything exactly like you but when i tap my pickup it doesnt make sound, it just starts to buzz louder. what am i doing wrong please help :(
@timsway3 жыл бұрын
Something is shorting out somewhere. Check everything very carefully. You can also try wiring the pickup directly to the output jack and check to make sure it works right, then add components from There.
@gnutscha3 жыл бұрын
@@timsway thank you so much for the fast answer!
@gnutscha3 жыл бұрын
@@timsway little update: you were right!! the neck pickup does not work, thanks again so much, i already thought im too dumb to solder.